Used Skf Joint Bearing for sale (3,970)

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes. Iodpfx Ahsz Nir Royobc

Condition: used, empty load weight: 7,170 kg, maximum load weight: 27,830 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2007, loading space length: 8,300 mm, loading space width: 2,300 mm, loading space height: 1,900 mm, loading space volume: 37 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel superstructure, aluminum rims, 3-axle, SAF axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), tarpaulin, catwalk, doors, U-protection, lateral aluminum road protection, supports Body: 3-axle steel body approx. 37m³ with hinged doors & roller tarpaulin 3x 9t SAF axles, 1st axle liftable! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ijdpfx Ahovhnk Ujyjbc - .

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, overall weight: 1,500 kg, controller model: Easy Control EC 10+, The machine has been completely overhauled! TECHNICAL DETAILS Edge material, strip: 0.4–6 mm Edge material, roll: 3 mm Workpiece thickness: 8–60 mm Workpiece width at workpiece thickness 8–22 mm: min. 70 mm Feed rate: 11 m/min Tool set Radius: 2 mm Joint milling unit Motor power: 2 × 2.2 kW Frequency: 200 Hz Cutting unit Motor power: 2 × 0.18 kW Milling unit Motor power: 2 × 0.27 kW Profile milling unit Motor power: 1 × 0.35 kW Design: WD 60 Working height: 950 mm MACHINE DETAILS Connected power: 9.8 kW Dust extraction connection: 1 × 120 mm / 3 × 80 mm / 1 × 100 mm Power supply: 400 V / 3 phase / 50 Hz Pneumatic pressure: 6 bar Dimensions & Weight Dimensions (L x W x H): 4,773 x 1,525 × 2,182 mm Weight: 1,500 kg EQUIPMENT Electronic control system Easy Control EC 10+ Automatic edge feeding Tool set R = 2 mm Joint milling unit Gluing unit A6 Pneumatic 2-point adjustment of the pressure zone Cutting unit for chamfer and straight processing Pneumatic adjustment of the cutting unit for chamfer and straight processing Milling unit, counter-rotating Pneumatic adjustment of the milling unit for chamfer, radius, and straight processing Profile milling unit WD 60 Scraper blade with quick-change heads Ibodpfxjz Iru De Ahyec Pneumatic adjustment of the scraper blade Glue joint scraper blade Smoothing unit with 2 motors Control texts in German and English Operating manuals for commissioning, operation, and maintenance in English on DIN-A4 paper and CD-ROM Operating manuals for commissioning, operation, and maintenance in German on a USB stick Spare parts labels in German and English New tools included

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust, combined jointer and thicknesser from Panhans, type 445. The machine has a planing width of 510 mm, a powerful 5.5 kW motor, and a motor brake. The complete cutterhead guard, including the support arm, has been replaced. Ibedpfxjzz Niuj Ahyjc Thanks to the segmented infeed roller, the machine is also well suited for simultaneously processing workpieces of different thicknesses or workpieces that are offset. Two rollers in the thickness table facilitate the feed, especially for heavy and long workpieces. Technical data and features: +Manufacturer: Panhans +Type: 445 +Combined jointer and thicknesser +Planing width: approx. 510 mm +Maximum thickness planing height: approx. 220 mm +Motor power: 5.5 kW +Operating voltage: 400 V +Cutterhead speed: approx. 5,000 rpm +Jointer table length: approx. 2,050 mm +Two feed speeds: approx. 7 and 14 m/min +Jointer fence can be swiveled up to 45° +Motor brake +Segmented steel infeed roller +Two rollers in the thickness table +New cutterhead guard, including a new support arm +Dust extraction connection: approx. 160 mm +Solid and durable industrial machine +Weight: approx. 1,000 kg A solid and heavy Panhans machine with a large 510 mm planing width – ideal for carpentry shops, joineries, and professional use. Inspection and a test run are possible by prior appointment.

Condition: good (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), Equipment: CE marking, For sale is a robust and precise jointer and thicknesser from the German quality manufacturer Panhans. The machine is equipped with a Centrofix cutterblock. This quick-change system – similar to the Tersa cutterblock – allows for easy cutter replacement without time-consuming adjustment of the cutter knives. Technical data and features: +Manufacturer: Panhans +Type: AD 440/445-B +Year of manufacture: 1999 +Planing width: 630 mm +Motor power: 5.5 kW +Operating voltage: 400 V +Total length of the jointer tables: approx. 2,300 mm +Centrofix cutterblock +Cutterblock speed: approx. 5,000 rpm +Digital display for planing thickness +Electromotive adjustment of the thickness table with the push of a button +Two rollers in the thickness table +Automatic workpiece feed +Two feed speeds +Massive, finely planed cast iron tables Ibjdszz Nk Eepfx Ahyoc +Folding jointer tables +Swiveling fence up to 45° +Dust extraction connection +Motor brake +CE version The robust Panhans construction ensures smooth operation and clean planing results. The digital display, the electric thickness table adjustment, and the Centrofix cutterblock allow the machine to be operated comfortably, quickly, and precisely. Ideally suited for professional use in carpentry shops, joineries, and woodworking shops. The machine can be demonstrated under power by prior arrangement. Shipping via freight forwarder is possible. You will receive an invoice with VAT shown. Price: €13,685 including VAT - €11,500 net Subject to prior sale and errors in the technical data.

Condition: used, power: 5.5 kW (7.48 HP), planing width: 520 mm, actuation type: pneumatic, Usable working width 520 mm Total table length 2310 mm Knife shaft diameter 120 mm Planer shaft speed 5000 rpm 4 knives 35x3x520 mm Aluminum fence 1200x190 mm Fence angle adjustment from 90° to 45° Min./max. planing height 3 / 250 mm Feed rate (thicknessing) 5-8-12-18 m/min Dust extraction port diameter (planing) 120 mm Dust extraction port diameter (thicknessing) 120 mm including: Ibjdpfjz Aukaox Ahyec Tersa knife shaft Auxiliary fence Planer safety guard Electric thickness table adjustment

Condition: excellent (used), For sale is a used Record Power thickness planer with a planing length of 1110 mm. The machine has been inspected by our qualified technicians and is in very good condition. Technical data: - Planing width 265 mm - Planing table length 1,110 mm - Stock removal per pass 3 mm - Planing fence, adjustable up to 45° - Cutterhead diameter 75 mm - Max. thickness 190 mm - Feed rate for thicknessing 5 m/min - Motor 1.7 kW / 2.3 HP / 230 V - Dust extraction port 100 mm - Weight 162 kg Iedez E Hx Espfx Ahyjbc The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Related terms: Planer, thicknesser, surface planer, planing, thicknessing Reference: R-M61I4

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - Shaft width: 410mm Ibjdpfxezrlb Us Ahyjc - Bed length: 2220mm - Cast iron beds - Both beds are adjustable - Original cast iron guide - Motor: approximately 3kW - Dimensions (L/W/H): 2220x800x1140mm - Weight: 504kg ADVANTAGES – German-made – Used surface planer – Very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling Ijdpfoxrb Tgex Ahysbc - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), fuel type: electric, color: other, overall weight: 14,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. Iodpfx Aszlr R Ajhysbc General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2018, For sale is a used Hammer planer machine A3-31 with a planing and thicknessing width of 310 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (fully functional) Technical data: - Planing and thicknessing width 310 mm Iodpszlthvofx Ahyobc - 3 cutterblocks (reversible cutter system) - Planing fence swiveling 90-45° - Planing table, dual folding - Thicknessing height 4-225 mm - 4 HP (3kW) motor, 400 volts The planer machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer machine, thicknesser, thickness, Felder Reference: R-A33HG

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust combined jointer and thicknesser, SCM Type 2250. The machine impresses with its heavy-duty, solid construction, a planing width of 500 mm, and long jointer tables. The fold-up jointer tables allow for quick switching between jointing and thicknessing. Technical data: +Manufacturer: SCM +Type: 2250 +Planing width: approx. 500 mm +Total length of jointer tables: approx. 2,200 mm +Maximum thicknessing height: approx. 235 mm +Minimum thicknessing height: approx. 3 mm +Maximum material removal in thicknessing: approx. 8 mm +4-knife cutterhead +Cutterhead speed: approx. 4,500–5,000 rpm +Motor power: 5.5 kW +Two feed speeds: approx. 7.5 and 15 m/min +Fold-up jointer tables +Swiveling fence +Automatic workpiece feed in thicknessing +Dust extraction connection: 150 mm +Weight: approx. 890 kg +Space requirement: approx. 2,200 × 1,350 × 1,100 mm Scope of supply: +Operating manual +Parts list +Setting gauge Ibedpfx Aozz Nt Hjhyoc +Replacement knives The machine is in used condition. Inspection and a test run are possible by prior appointment. Loading and transport can be arranged upon request. Location: 39340 Haldensleben Price: €4,350 net

Condition: new, Number of motors 1 Stück 0 , mm Control , 0 cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: 7,290.00 Electronic length stop with support plate EUR Ijdpfjy T R Sqsx Ahyjbc Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: EUR 600.00 Manual length stop Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 30,343 h, travel distance X-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details. Ibjdpfx Ahjz Eai Rjyoc - Operating Hours (Main Switch On): 67,030 h 12 min- Operating Hours (Machine Fully Switched On): 45,945 h 26 min- Operating Hours (Automatic Production Mode): 30,343 h 56 min- Main Spindle Running Hours: 18,096 h 58 min- Total Tool Changes: 3,129,425- NC Control Manufacturer: Siemens- NC Control Type: 840D- Main Spindle Manufacturer: Fa. Chiron- Main Spindle Motor Manufacturer: Siemens- Main Spindle Motor Type: 1 PM 6105-2 LZ 84-9 EM 1-Z- 4th Axis Manufacturer: Fa. Peiseler- 4th Axis Type: ZAS160- 4th Axis Counter Bearing: Peiseler GP MK3- 5th Axis Manufacturer: Fa. Peiseler- 5th Axis Type: ZAS160- 5th Axis Counter Bearing: Peiseler GP MK3 - Substructure (Base Frame) Manufacturer: Hamül- Substructure (Base Frame) Type: L- Machine Structure Manufacturer: Chiron- Hydraulics Manufacturer: FMB- Hydraulics Type: 3116265- Cooling Unit (Chiller) Manufacturer: Hyfra- Cooling Unit (Chiller) Type: VWK90-D0- Central Lubrication Manufacturer: SKF- Central Lubrication Type: KAF1-M-W-S3+924- Control Cabinet Cooler Manufacturer: Rittal- Control Cabinet Cooler Type: SK3304142- Extraction System Manufacturer: Umwelttechnik 99- Extraction System Type: LCF-3000- Fire Extinguishing System Manufacturer: Total Walther- Fire Extinguishing System Type: (UE-03)K8- Coolant System 2 Manufacturer: Bürener Maschinenfabrik- Coolant System 2 Type: 001300000170- Chip Conveyor Manufacturer: Knoll- Chip Conveyor Type: 750K-1150/- X-Axis Motor Manufacturer: Siemens- Tool Magazine Chain Motor Manufacturer: Siemens- Tool Magazine Chain Motor Type: 1 FT 6034-4 AK 71-3 EA 1- Tool Magazine Linear Motor Manufacturer: Siemens- Tool Magazine Linear Motor Type: 1 FK 7063-5 AF 71-1 EH 2- Chip Conveyor Screw Motor Manufacturer: Bauer- Chip Conveyor Screw Motor Type: BS04-71V/D06LA4

Condition: like new (used), Year of construction: 2010, operating hours: 200 h, functionality: fully functional, Finger-jointing line, like new, only operated for 60 days. Ibsdpfxeyl Nuao Ahyjc

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,400 mm, total width: 1,440 mm, total height: 3,000 mm, overall weight: 6,500 kg, warranty duration: 12 months, blade width: 75 mm, power: 90 kW (122.37 HP), rotor length: 1,080 mm, MIZAR DSH Series - Double Shaft Shredder for Metal, E-Waste & Plastics High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, low-speed, high-torque shredding performance for the toughest materials. Designed for reliability, built for industrial scale. CORE ADVANTAGES • Drive System: Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low RPM ensures efficient size reduction with minimized wear. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally trusted brands for long-term reliability. • Blade Technology: Custom-engineered, high-alloy wear-resistant steel blades [Örn: HARDOX or equivalent]. Optimized cutting geometry for aggressive intake and consistent output size. • Structural Strength: Reinforced steel frame construction for vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION FIELDS • Scrap Metal: Aluminum profiles, radiators, light scrap, sheet metal. • E-Waste: PCBs, motherboards, hard drives, mixed WEEE materials. • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Waste: HDPE pipes, industrial drums, PET, big bags. • Wood & Alternative Fuels: Pallets, MDF waste, pre-shredding for RDF and SRF production lines. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material) • DSH S1: Compact footprint. Ideal for medium-capacity operations. • DSH M1: High-performance all-round solution for diverse material streams. Iodpfx Aheyypp Isyjbc • DSH L1: Heavy-duty industrial powerhouse for large-scale recycling plants. Why Mizar DSH? • High torque without high energy consumption • Modular design for seamless integration into complete recycling lines • Easy maintenance access and quick blade-change system • Built for 24/7 industrial environments Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Iodpfxjwhdnhe Ahyobc Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Year of construction: 2002, condition: excellent (used), functionality: fully functional, machine/vehicle number: 109 262, For sale is a corner connection press complete with automatic adhesive injection unit from Schüco, Art. No.: EVM 280106, including an extensive range of accessories for various profile series, manual, and CE certification. The machine has seen very little use due to lack of space and is therefore in like-new condition. Iodpfjyc Sinsx Ahyjbc

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T65 CNR4 Year of manufacture: 2002 Nominal force: 500 kN Mass: 5,000 kg Strokes per minute: 73 Maximum insertions per minute: 36 Operating air pressure min./max.: 4–5.5 BAR Braking time: 0.154 s Safety distance: 246 mm Energy: 3440 KJ Adjustable stroke min./max.: 10–120 mm Ram adjustment: 100 mm High shut height adjustment: 320 mm Maximum extraction stroke: 40 mm Worktable surface: 820x580x68 mm Ram plate dimensions: 470x340 mm Distance between table and ram: 280 mm Shank diameter: 45 mm Slide from center: 280 mm Maximum die dimensions: 470x340 mm Upper die weight: 136 kg Voltage: 400 V Hydraulic overload protection Supplied with instruction manual and CE conformity Ibsdsx Ura Sopfx Ahyjc Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Countershaft bearings; • Clutch plates; • Clutch pins and flanges; • Clutch seals; • Hydraulic overload seal; • Hydraulic overload hose; • Equalizer cylinder seals; • Air gauges; • Front and side safety guards with safety keys; • Worktable reground on CNC machine; • Foot pedal; • Electrical panel with remote support.

Condition: reconditioned (used), Working width 3600 mm Working height 2600 mm Number of cylinders 5 St. loading dimensions L x W x H 4400 x 1150 x 2970 mm weight 3000 kg Schafberger + Sproedhuber Bavaria Frame Press ----- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Iedpfjw T Un Usx Ahyjbc Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoiding cylinder collisions. Lower abutment adjustable in several positions for the most favorable insertion height. 3 vertical press cylinders, double-acting, stroke adjusted to working height 2 horizontal press cylinders, double-acting Abutment and pressure plate depth 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing supports for sloped windows (Technical specifications according to the manufacturer – no guarantee! Images may differ from the original. Prices are net, plus VAT (domestic))

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Isdpfx Ahsu Img Soysbc Ratchet and socket sets 1/4", 3/8", and 1/2", including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4", 3/8", and 1/2". Drawer 3 Open-end/ratchet wrench set (approx. 8–22 mm), double box-end wrench set, and torque wrench. Drawer 4 Precision, slotted, Phillips, and Torx screwdrivers in various sizes, including soft-grip versions. Drawer 5 T-handle hex/Allen key set with ball end and T-handle Torx set (T10–T40). Drawer 6 Pliers and hand tool set: circlip pliers (internal/external), combination and needle-nose pliers, side cutters, pipe wrench, claw hammer, and center punch set.

Condition: new, The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Large planing shaft diameter for a very nice planing result Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform technical data: Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Cutter block diameter 95 mm Planing width 400 mm Length planing table 1660 mm Admission height 230 mm Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 410 x 600 mm Ijdpevrvz Njfx Ahyobc Max. chip removal (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 334 kg Optional accessories: Moving device Service check for spiral cutter block

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Iodpfx Ahoyw Rzaoyjbc Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Ibodpfxjywfbuj Ahyec Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: good (used), Year of construction: 2000, FANUC LR Mate 200i Automation Robot + R-J2+ Controller + Handheld The FANUC LR Mate 200i is a compact, six-axis robot ideal for a wide range of manufacturing and system processes. The tabletop design of the LR Mate 200 enables its use in various commercial and industrial applications while saving space. The LR Mate 200i offers maximum flexibility in a compact design. The hollow-joint construction of the LR Mate 200i encloses all cable routing to prevent snagging, and absolute serial encoders eliminate the need for calibration upon power-up. Upright or inverted mounting positions are possible without any robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i features an end-effector connection integrated into the wrist, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard package for protection against dust and liquid ingress according to IP54. It also has an integrated, internally mounted solenoid valve package. In addition, the 200i can achieve axis speeds of up to 480 degrees per second. Applications: Assembly, material transport, material removal, part transfer. Robot specifications Axes: 6 Payload: 3.00 kg H-reach: 700.00 mm Repeatability: ± 0.0400 mm Robot mass: 39.00 kg Structure: Articulated Year of manufacture: 2000 Isdpfx Ahewbqvfsyebc Robot movement speed J1 180 ° / s (3.14 rad / s) J2 180 ° / s (3.14 rad / s) J3 225 ° / s (3.93 rad / s) J4 400 ° / s (6.98 rad / s) J5 330 ° / s (5.76 rad / s) J6 480 ° / s (8.38 rad / s) Robot movement range J1 ± 160 ° J2 + 150 ° - 35 ° J3 + 165 ° - 150 ° J4 ± 190 ° J5 ± 120 ° J6 ± 360 ° Item condition: used You can find more items – new and used – in our shop! International shipping costs on request!