Used Site Dumper for sale (6,181)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. Lsdpfxjzcqy Es Albeah The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: used, mileage: 689,579 km, power: 100 kW (135.96 HP), first registration: 03/2014, fuel type: diesel, next inspection (TÜV): 10/2027, color: black, gearing type: automatic, emission class: euro5, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * 5,200 EUR * Volvo S80 D3 2.0 Diesel Kinetic Geartronic Automatic Navigation PDC Climate Control Leather Euro 6 * Seats: 5 (2+3) * Automatic transmission * Radio/CD * Lumbar support * Leather steering wheel * Navigation system * Touchscreen * Traction control * Automatically dimming interior mirror * Speed limiter * Front, side, and additional airbags * Cruise control * Ski bag * Distance warning * Seat heating * Automatic climate control * Hands-free system * Multifunction steering wheel * On-board computer * Bluetooth * Rain sensor * Tire pressure monitoring * USB * Emergency call system * Emergency brake assist * Electric windows * Electric mirrors * Central locking * Tire pressure monitoring * Traction control * Touchscreen * Isofix * ABS * ESP * Start/Stop automatic * Alloy wheels * Fog lights * Rear parking assist (PDC) * Full leather * Wheelbase: 284 cm * Unladen weight: 1531 kg Ljdpfx As Adndtelboah * Payload: 669 kg * Weight: 00 kg * Passenger car registration * Vehicle No.: 42 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment only...) CONTACT DETAILS Telephone: WhatsApp: E-mail: Transit and customs license plates (export number) available from us. Errors, typos, and prior sale are subject to change. Technical specifications and features should be checked separately. The condition as per the contract is only the one that is inspected on site and guaranteed in writing at the time of purchase. Please arrange an appointment...

Condition: used, Year of construction: 1999, A complete extrusion line is available, equipment: 5x control cabinets, 1x frequency inverter for the main drive, 1x frequency inverter for ZSB/heating, 1x PLC control system, 1x feeder, 1x vibrating screen with Congrav, 2x pre-feeders from Brabender, 2x gravimetric feeders from Brabender, 1x volumetric feeder from Brabender, 1x Coperion ZSK 58 Mc twin-screw extruder, 1x ZS-B 58, 1x frequency inverter cabinet, 1x SL cabinet with Siemens S7-300 control system, 1x local control cabinet at the machine with integrated EPC NT operator terminal with LM3 from Brabender, 1x cooling unit, 1x complete strand pelletizing system, 1x classifying screen with extraction system, 1x pair of spare screw shafts with screw elements, material 15, unused, total weight of the system: 5.843t, with documentation. An on-site inspection is possible. Ljdpfe Aa Aldox Albsah

Year of construction: 1997, condition: used, Cutting speed copper/aluminum: 80m/min, structural steel/steel pipes: 65-85m/min, C45/comparable steels: 55-80m/min, C60/comparable steels: 55-65m/min, 34CrMo4: 40-60m/min, 42CrMo4: 40-55m/min, 10CrMo9-10: 30-50m/min, high-alloy steels: approx. 20-40m/min, connected load: 5kW, rated current: 16A, weight: 1.75t, an on-site inspection is possible. Lasdpfx Ao Adt Epjlboh

Year of construction: 1998, condition: used, Jointer table length: 2100mm, spindle speed: 6000rpm, tool diameter: 100mm, feed roller diameter: 120mm, finished dimensions: 20-180x5-120mm, spindle diameter: 30mm, feed speed: 8m/min, number of planer heads: 4, footprint: approx. 4.62m², length: 3350mm, width: 1380mm, height: 1500mm, weight: 1.57t, an on-site inspection is possible. Ledpfx Ao Adt Hmolboah

Condition: used, Punching force: 630kN, operating voltage: 380V, rated current: 25A, an on-site inspection is possible. Ljdpfx Ao Adt Htolbjah

Condition: used, Year of construction: 2024, Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible. Ljdpo Adt Iqjfx Alboah

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Lasdsxvivqopfx Albsh Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VCS³ 7034-5 Climate testing chamber Ledszpihaopfx Albeah Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Device type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7.0 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±2.0 K Climate range (temperature): +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittent) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Stainless steel interior Temperature and humidity control Ethernet interface USB interface Cable gland 50 mm Cable gland 125 mm Test object protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Year of construction: 2025, condition: new, functionality: fully functional, ACCESS NOW – IT PAYS OFF! SPECIAL PRICE + LIMITED QUANTITY iCOMBI PRO 10-1/1, 1 DOOR, LEFT-HAND HINGE NEW, IN ORIGINAL PACKAGING + 1 YEAR MANUFACTURER'S WARRANTY + 2 YEARS WARRANTY WHEN INSTALLED BY A RATIONAL SERVICE PARTNER The iCombi Pro is the latest combination oven from RATIONAL. The iCombi Pro 10-1/1 electric model with 10 GN 1/1 trays is easy to operate even for untrained personnel, as it achieves outstanding food quality without requiring constant monitoring. The super-fast intermediate and self-cleaning functions keep your appliance sparkling clean. You will receive an invoice with VAT shown. The manufacturer's recommended retail price (RRP) is €15,520 net = €18,468.80 gross. Our special price is €9,622 net / €11,450.18 gross. INQUIRY ABOUT AVAILABILITY!!! OUR DEVICE SERVICE FOR YOU: Up to 2 years manufacturer's warranty High-quality branded devices at fair prices Professional and competent advice - before and after purchase Free shipping within Germany (excluding islands/mountain stations) Provision of operating instructions, connection diagrams & spare parts Trade-in of your combination oven from model year 2011 onwards Complete range of accessories at attractive prices The iCombi Pro from Rational sets a new standard in terms of intelligence, efficiency & flexibility. Condition: New, fully functional, year of manufacture 2025 TECHNICAL DATA: W x D x H: 850 x 842 x 1014 mm Power connection: V: 400 / Hz: 50-60 / kW: 18.9 Weight: 127 kg SPECIAL FEATURES: Energy-efficient: 60% less energy consumption thanks to state-of-the-art thermal insulation Self-cleaning: The appliance cleans itself automatically using an installed program. Operation possible without an additional water softening system and without additional descaling. SHIPPING: Ledpozz I Ayefx Albeah Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table length: 5,000 mm, table width: 1,730 mm, table height: 300 mm, Equipment: documentation/manual, Special Offer Inspected and fully functional traveling column milling machine including clamping plate Lasdpfx Asz Spn Delbeh SHW UF 6 L Technical Data Travel distances • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (spindle head): 1,500 (1,200) mm Control system • CNC control: Heidenhain TNC 415 Feed rate • X, Y, and Z axes, continuously variable from: 2 – 8,000 mm/min Universal milling head in orthogonal design • Swiveling range of milling head mounting, motorized: 340 degrees • Swiveling range of milling head: 180 degrees • Tool holder: SK 50 Year of manufacture: 1992 Inspection: 2026 The machine has been put back into operation and inspected at MBM and can be demonstrated under power at D-73479 Ellwangen. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, the supply of spare parts, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – milling machine used – milling machine used – CNC milling machine used – drilling and milling machine used – milling machine metal used – metal milling machine used – used CNC milling machine – CNC milling machines – CNC milling machines – milling machine – large-part machining – large-part machining – large-part machining – CNC large-part machining – milling – shw – uf6 – uf 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: excellent (used), Year of construction: 2018, Compressor: €10,000. Lasdpfsz Spi Dex Albeh

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: Laodpfx Aljtt Da Dobjh - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Lodpfjuxqzusx Alboah Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulators, water-cooled Climate chamber 110 m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulators – i.e., a modular climate chamber that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's site. This allows for uncomplicated retrofitting (more depth or additional modules) as well as later relocation. Technical data of the climate chamber: Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Lasdpfxjzizldj Albeh Windows: 1x (460 x 550 mm) in the front chamber door, heated 1x (1260 x 1000 mm) in the left side wall, heated Temperature range: -40°C to +120°C Time deviation: ± 0.8K – 1.5K according to DIN 50011 with empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500 kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, Ljdsz Akcfjpfx Albeah as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Ljdsulzchspfx Albeah Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 2007, functionality: fully functional, Machine-Details Stock-No. 1022-E06374 Type of machine Travelling column milling machine Make CME Type MB-9000 Year of manufacture 2007 Type of control CNC Storage location Spain Country of origin Spain Delivery time Immediately Freight basis Ex site, without dismantling and loading Technical details x-travel 9000 mm y-travel 4000 mm z-travel 1000 mm W-axis (spindle longitudinal) 700 mm spindle diameter 150 mm tool taper ISO 50 DIN-69871 spindle turning speed range 2350 U/min transmission ratio 2 main drive motor 37 kW weight of the machine ca. 125 t Additional information Ledpoz S Arpofx Albeah * CNC-control SIEMENS Sinumerik 840 D * 2 rotary tables (hydrostatic) make RÜCKLE, 2500 x 2500 mm, table load 25 to, travel 2000 mm * Coolant equipment (1000 liter) with coolant through spindle 40 bar * Chip conveyor * 90-station automatic toolchanger - max. tool diameter 125 (240) mm - max. tool length 400 mm - max. tool weight 20 kg * several toolholders

Condition: used, Year of construction: 2018, Year of manufacture: 2018 Lsdpsyuga Eofx Albeah Colour: Grey Empty weight: 400 kg Dimensions (LxBxH): 160 x 130 x 130 cm - Details: - └ Description: Includes tank and dryer - Year: 2018 - Documentation available: No - CE certificate present: No - Transport dimensions: 1600mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), For sale: Professional tool grinder by HASBERG, model FSS. German-made, solid and precise construction. 📊 Technical data: Manufacturer: HASBERG Model: FSS Year of manufacture: approx. 1976 Power supply: 3-phase 220/380 V Motor power: 250 W Speed: 2750 rpm 🛠 Condition: The item is used, shows normal signs of wear, and is in good technical condition. The machine is fully functional and ready for operation. 📦 Included: Set of collets (various diameters – as shown in the photos) Additional grinding wheels Accessories as visible in the photos ✅ Advantages: Lajdpfxjz Smxbo Albjh Very robust construction (German quality) Large set of collets (high value) Precise machining and tool sharpening Ideal for workshops, tool rooms, or production ℹ️ Additional information: The set for sale is exactly as shown in the pictures. Inspection on site possible. Shipment on a pallet or personal collection possible.

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: Lasdsz Smxzepfx Albjh - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Condition: used, mileage: 108,498 km, power: 96 kW (130.52 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2027, color: brown, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,300 mm, loading space width: 1,740 mm, loading space height: 1,850 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * German vehicle, second owner, very good condition * WF0XXXTTGXHM05106 * Air conditioning * Rear view camera * Navigation system, DAB radio * 3 seats * Seat heating Lsdpe Adwh Ujfx Albsah * Differential lock * Trailer hitch, 2,750 kg towing capacity * Cruise control * Multifunction steering wheel * 6-speed manual transmission * Central locking, remote key * Electric windows * Wheelbase 3,750 mm I will gladly send a video via WhatsApp. WhatsApp: Polish contact: [Polish contact information] Sale only to commercial businesses, no guarantee, all information without guarantee, subject to prior sale. Special equipment: Airbag, passenger side, passenger airbag can be deactivated, cargo area light LED, metallic paint, tire repair kit, Visibility Package 3, exterior mirrors, electrically folding, exterior mirrors, electrically adjustable and heated, audio navigation system Ford SD (with Ford SYNC 3), digital radio reception (DAB), audio system: radio/CD player with multi-function display, audio/radio remote control on the steering wheel, mobile phone/cell phone preparation with Bluetooth/USB interface, AUX-IN connection, USB interface, voice control and Bluetooth interface, seat package 9 / 15, driver's seat (4-way adjustable) - passenger double seat incl. seat heating, fabric, seats in the cab: driver's seat heated, seats in the cab: passenger seat heated, seat cover / upholstery: fabric, seats in the cab: driver's seat height adjustable, seats in the cab: passenger double seat, seats in the cab: driver's seat with lumbar support, folding table integrated into the passenger double seat, storage compartments under the seat bench, interior trim in the cargo/passenger compartment: high, interior trim in the cargo/passenger compartment: hardboard Additional equipment: 3rd brake light, storage compartment in the headliner of the driver's cab, airbag, driver's side, anti-slip control (ASR), exterior mirrors, electrically adjustable and heated, turn signal in exterior mirror, floor covering: vinyl in cargo/passenger compartment, on-board computer, roof lining in passenger compartment, rev counter, electronic brake force distribution (EBD), electronic differential lock (EDS), generator 165 A, grab handle B-pillar, rear wing doors without glazing (opening angle 180 degrees), heating with recirculation, interior filter: pollen filter, body/structure: high-roof van standard, body variant: medium-high roof, radiator grille silver, cargo compartment partition high behind driver and passenger, steering column (steering wheel) adjustable in height/length, headlight range adjustment, truck registration, engine 2.0 L - 96 kW TDCi CAT, parking pilot system front and rear, production site: Otosan, wheelbase 3750 mm, wheel covers, low emissions according to emissions standard Euro 6, sliding door cargo/passenger compartment right, side protection strips wide (side cladding), seats in the cargo/passenger compartment: 1st row, 3-seater bench, steel rims 6.5x16, bumpers partially painted, Trend, rear step integrated, tinted glazing, second key with folding remote control.

Condition: used, mileage: 107,000 km, power: 335 kW (455.47 HP), first registration: 04/2024, fuel type: diesel, number of seats: 50, gearing type: automatic, next inspection (TÜV): 04/2027, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Setra 516 HD with 48 + 2 + 1 reclining seats, original 107,000 km - automatic transmission - Lsdpfxo Adw Uzs Albeah * Diesel - 10,667 cc - 335 kW - 455 hp - Euro 6 E - Green environmental badge - TÜV (German vehicle inspection) * 360° rear view camera - 2.3 kW inverter - USB port at each seat - adaptive cruise control * Xenon headlights - footrests - folding tables - reading lights - luggage nets - retarder - * Auxiliary heater / radio / ABS / ASR - 2 x 19-inch screens - toilet - onboard kitchen - WIFI / WLAN - * Vehicle dimensions: Length: 13,115 mm x Width: 2,550 mm x Height: 3,770 mm * German vehicle - German vehicle registration document - Sale on behalf of a customer - * Errors / typos and prior sale reserved * Please arrange an appointment for viewing and test drive * Contact: Andreas Vogel * ATTENTION - Vehicle is stored off-site - Please inquire about the exact location - ATTENTION -

Condition: excellent (used), functionality: fully functional, gearing type: automatic, fuel type: diesel, color: blue, overall weight: 11,800 kg, maximum load weight: 48,000 kg, lifting height: 1,830 mm, tire size: 385/65 R 22,5, axle configuration: 3 axles, first registration: 10/2026, suspension: air, Year of construction: 2022, operating hours: 1,978 h, machine/vehicle number: WKY3S0639JM035688, Equipment: 3rd hydraulic function, EBS, hydraulics, onboard computer, GB Mobileman D3L – Horizontal System for the Production of Flowing Screeds We are offering for sale a GB Mobileman D3L, a self-contained horizontal system designed for the production and pumping of flowing screeds. Date of commissioning: 11/2022 Current operating hours: 1,978 hours The machine is still in operation. DESCRIPTION AND OPERATION The GB Mobileman D3L is a self-contained mixing semi-trailer designed for producing flowing screeds directly on construction sites. After loading the required materials at a filling center, the machine can be transported to the site, prepared for operation, and connected to a water supply. With a documented gross combination weight of 48 tonnes, the machine can carry sufficient material to produce approximately 14.5 m³ of screed on site. Actual continuous production capacity is approximately 8.5 m³/h. The machine can be cleaned directly on site after completing the job. MATERIAL STORAGE The machine is equipped with: 20 m³ sand compartment 12 m³ binder silo 2,500-litre water tanks The binder silo can be filled through the top hatch or pneumatically through the prepared side connection. Both material compartments are equipped with pneumatic vibrators powered by a compressor with an expansion tank. The sand compartment has an automatic retractable cover operated by remote control. MIXING AND PUMPING Sand is transported to the mixer by a belt conveyor, while the binder is fed by a screw conveyor. The mixer is equipped with load-cell weighing and discharges the prepared mixture into the pump chamber, from where it is pumped through the delivery hose to the required location. Mixer capacity: 300 litres Batch volume: 250 litres Production capacity: approx. 8.5 m³/h A hose reel is mounted above the mixer and can be operated from the main control panel or by remote control. SEMI-TRAILER AND CHASSIS The superstructure is made of aluminium, resulting in a semi-trailer weight of only 11,800 kg. KEMPF three-axle chassis: Front axle – liftable Two rear axles – steering This configuration provides excellent manoeuvrability, especially on construction sites and in confined or densely built-up areas. The trailer has disc brakes, and its height can be adjusted to three different positions. POWER UNIT AND HYDRAULICS The machine has its own four-cylinder HATZ diesel power unit. The engine drives hydraulic pumps, which power the hydraulic motors operating the machine's individual mechanisms. The engine and mixing superstructure are regularly serviced according to the manufacturer's recommended service intervals. CONTROLS AND EQUIPMENT The machine is equipped with a control panel with a display and includes: Printer for delivery notes Remote control Two batteries for the remote control The remote control allows adjustment of the water quantity and operating speed, as well as starting and stopping the pumping process and engine. HISTORY AND SERVICE The machine was purchased new from the official Czech representative responsible for sales and service. The engine and mixing system have been regularly serviced and maintained according to the manufacturer's recommended intervals. INSPECTION AND TRAINING We offer: Machine inspection Demonstration during operation on our construction projects Demonstration of screed production and pumping Operator training in Czech or English Ljdpj Adz Raofx Albsah The machine is still in active operation and can be inspected and demonstrated at work by prior arrangement.

Condition: used, functionality: fully functional, This used STOW pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage requirements. The modular high-bay system is ideal for logistics operations, industrial facilities, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet rack solution provides an efficient method for storing Euro pallets and heavy unit loads. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 10,080 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm (PNB0472) - Beam colour: yellow, painted - Uprights: approx. 520 x 110 cm, pre-assembled - Upright colour: blue, painted - Levels: floor + 2 - Pallet locations: 333 incl. floor positions - Version: Used STOW SCOPE OF DELIVERY: - 037 x uprights (approx. 520 x 110 cm), pre-assembled - 144 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 288 x locking pins Price: €8,430.00 net Lodpfo Adzd Hjx Albsah €10,031.70 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany through our partner forwarding company – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quotation tailored to your individual requirements. Whether you need a new installation, modification, or extension, we offer expert advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! On-site, you can get a comprehensive impression of our pallet racking, storage racks, and additional solutions. Many systems are assembled and available for direct demonstration. Our specialist consultants are happy to answer your questions and offer tailored advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many current offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone call. Our telephone number can be found on our company page. ☎️ We are available from Monday to Friday, 08:00 to 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.