Used Ride-On Floor Scrubber Driers for sale (16,709)

Condition: used, Year of construction: 2016, operating hours: 43,000 h, functionality: fully functional, System consisting of: 1 welding robot Qirox QRC 350-E including V6 Adv. control system, programming handheld device with 15 m cable, 24 V buffer, 2 GB flash drive, external cooling unit. Software extension: Kdodozmyfwspfx Aa Eop Gas nozzle sensor, arc seam tracking, point editor, transformation, parameter interlocking, multi-layer technique, Manax Offline laser ICSE LD Welding equipment: Qineo Puls 600 (600 A) with Premium control module, wire feeder, torch hose package, welding torch MRW 510 evo, Duo drive CDD 2, torch testing gauge individual and with CDD, mechanical cleaning with wire cutter, external cleaning, pressure amplifier, wire spool equipment. Elevated track 20 kN, travel path 10 m, 2 track supports. 2 L manipulators WPS-TS 7.5 kN, rotation radius 1100 mm, load capacity 750 kg. 2 adjustable counter bearings, travel distance 3 m, manual. Connecting control, 2 start pre-selection, partition walls and 2 sliding gates including end switch protection. 1 filter unit Tecau 6000 m3 suction capacity, 1 suction hood 3x2.5 m with curtains, suction slit channel. Documentation, CE declaration. The system was dismantled in June, inspected before dismantling and regularly maintained by Cloos.

Condition: not inspected (used), Year of construction: 2005, Without battery Manufacturer: Fimap Kdjdehzrbnopfx Aa Esp

Condition: used, maximum load weight: 29,770 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2024, Equipment: ABS, H&W (Vreden) AGRAR Walkingfloor 70 cbm in full specification First registration Internal dimensions (LxWxH): 11,560 x 2,480 x 2,360 / 2,566 mm (tapered design) Fifth wheel height: 1,250 to 1,300 mm Overall height: 3,900 mm SAF axles "Off-Road" with large 430 mm disc brakes WABCO trailer EBS with RSS stability program Kodpezmqmrefx Aa Esdp Chassis made of fine-grained steel, hot-dip galvanized Forced steering on 1st and 3rd axles, TRIDEC system with rod linkage 3x central grease points located externally Tyres: 6 x 445/65 R 22.5 Cargo-Floor AGRAR floor with 15-board system, reinforced version, 10 mm RADIO remote control for floor and rear wall flap Side wall joint seams fully welded inside (grain version) 2x reinforced cross members Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Hydraulic tailgate with grain chute Hydraulic connections on the front wall and additionally on the support legs PNEUMATIC PARTITION POSITIONER Roll-up roof tarpaulin with quick tensioning system RENTING is the new BUYING, and with us IMMEDIATELY available also with full-service rental-----

Condition: used, kW: 30 Kdodpjzmdkkjfx Aa Ejp Rotor diameter: 500 mm Rotor width: 1200 mm

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Ksdpfszmdi Tjx Aa Ejdp A total of four dryers of this model are available.

Condition: used, kW: 30 Rotor diameter: 500 mm Kdjdpfx Aaszmdi Hs Eep Rotor width: 1200 mm

Condition: used, kW: 30 Rotor diameter: 500 mm Rotor width: 1200 mm Kdodpfxezmdbce Aa Ejp

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm number 2 Plate thickness 400 mm weight of the machine ca. ca. 14 t dimensions of the machine ca. 8 x 3 x 0,4 m Ksdpfx Aaov Ey Nqo Esdp 2 pieces available. Plates does have 10 t- slots in length direction each 32 mm wide.

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T Kjdpozmw Iiefx Aa Esdp 3 same plates available.

Condition: new, empty load weight: 8,367 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 87 m³, suspension: air, tire size: 385/65R22.5, | Knapen K600 moving floor | Side doors | 13 pairs of lashing rings in the side profile | Roll-up tarpaulin, standing platform | BPW axles with disc brakes | 1 axle lift | Spare wheel holder | Alloy rims (ALCOA Ultra One aluminium rims) | Toolbox | Dead weight: 8367kg | 6mm floor, 21 boards | Additional hydraulic connections mounted on the support legs including mounted hose guide | Rim size 22.5 x 11.75 | | PRICE EX WORKS Errors, input and advance sales excepted. Kdodpfxov Tnhde Aa Eop

Condition: new, empty load weight: 7,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Knapen K100 New Vehicle, 92 m³ | 13 lashing points | 10 mm floor | 900 g tarpaulin | BPW axles | Lift axle | 2 toolboxes | 2 work lights | 92 m³ | Hydraulic connections on the support legs with load compensation | Ladder on the side guard | Subject to errors, input errors, and prior sale. Kodpfx Ajy Uk S Hoa Eodp

Year of construction: 1988, condition: used, machine/vehicle number: 01910/88, Floor sanding machine, Eugen Laegler Type: Vibrafor Motor power: 1.1 kW Voltage: 220 V Vibrating sanding surface Dust bag Ksdpfx Aajcb Au Ss Esdp Location: 54634 Bitburg – can be inspected.

Condition: used, machine/vehicle number: 4/14242, Frank floor grinding machine FSR, used Motor power: 0.75 kW Voltage: 230 volts 5 amps, 50 Hz Kjdpsb Auu Rsfx Aa Eodp Machine number: 4/14242 Dust bag Location: Available in Bitburg warehouse

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Kdodpjzlaa Eofx Aa Eop Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: used, Year of construction: 1991, Second-hand machine Year of manufacture: 1991 Features and technical specifications: - fully installed dryer with trolley, high-performance radial fan, electric heating, - Air inlet and outlet flaps, safety thermostat, spray system - Lift-and-swing door for convenient opening and closing of the dryer - Internal cladding: all side walls are made of special seawater-resistant aluminium - The stainless steel shelves are permanently resistant to aggressive substances found in wood, such as tannic acid, etc. - The sealing of the joints is completely durable and also allows for steaming within the unit - Stack dimensions: 530 x 105 x 115 cm - Stacking capacity: 6.4 m³ Kdjdpfx Aajzk N Suj Eop - External dimensions: approx. 690 x 140 x 200 cm - Heating: 12 kW - Motor: 1.1 kW / 400 V - with MP 902 control unit Availability: at short notice Location: 63934 Röllbach

Year of construction: 2009, condition: used, Second-hand machine Environmentally friendly thanks to the use of R404A Energy savings thanks to a rotary refrigerant compressor (20–30% more efficient than (compared to a conventional piston) intelligent drainage system Ksdpfx Aozk Nrhoa Ejdp Max. operating pressure: 13 bar compressed air output 5,200 l/min 7,312 m²/hour Motor power 1.58 kW, 230 V Max. inlet temperature 55 °C Dimensions: 557 x 460 x 789 mm Availability: at short notice Storage location: Röllbach

Condition: used, mileage: 384,013 km, power: 375 kW (509.86 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, IVECO X-WAY AS440S51T/P ON+ 4x4 Hydrodrive HI Traction (with switchable hydrostatic front-wheel drive and increased ground clearance) Transmission Hi Tronix Hi Traction, Hydrostatic front-wheel drive with tipping hydraulics Automatic transmission Eurotronic, 12 gears Assistance Systems Electronic Braking System EBS, Brake Assist, Adaptive Cruise Control ACC, Lane Keeping Assist, Hill Start Assist, Coasting function Lights and Visibility Fog lights, LED daytime running lights Audio & Communication Radio-navigation system: with touchscreen, sound system, hands-free Bluetooth, TV Exterior Leaf-air suspension, Fifth wheel coupling, Roof spoiler, Electrically adjustable and heated exterior mirrors, Differential lock, Axle load indicator, Connection plug 2x7 pole, Speed limiter: 90 km/h, Full fairing Safety Intarder, Electronic Stability Program ESP, Traction Control System ASR, Anti-lock Braking System ABS, Outside temperature display, Tire pressure monitoring, Immobilizer, Telematics system preparation, Emergency brake assist Interior Digital tachograph, Multifunction leather steering wheel, Sun visor, Cooler box Comfort Automatic climate control, Auxiliary heater, Driver/passenger seat with air suspension, Armrest driver/passenger, Seat heating driver/passenger, Electric windows, Central locking with remote control Additional Equipment Eco-Fleet, Eco-Roll, Rocking Mode, Eco-Switch, Driving style analysis and driver fatigue detection DSE + DAS, Swiveling passenger seat, Folding side panels in cab color, LED rear lights Other Dimensions and Weights Kjdjzmcqvspfx Aa Eedp Payload: 9546 kg, permissible total weight: 18,000 kg, AdBlue tank: 135 l, Wheelbase: 3790 mm We would be happy to prepare a personalized financing/leasing offer for you! Please contact us! Sale only to commercial businesses or for export. Subject to errors and prior sale.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Kjdjy Urtfopfx Aa Esdp Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 07/2027, Hydraulic hoses 4400 mm, 2x T'Edbro couplings, screw fittings, pressure 1", return 1". 3 x 9 ton BPW OFF Road axles, 1st axle as lift axle, axles center-mounted with axle load indicator. 6-piece tires 385/65 R 22.5, steel rims 11.75 x 22.5 / ET 0, disc brakes ø 430 mm, mechanical landing gears, foldable SSV, toolbox with triple-lock system. Aluminum superstructure 3/2, standing platform with ladder access on the left, floor profile type 10, CLEENSWEEP separation tarp with hydraulic drive at the front wall, hydraulic Ecotop cover. 3 x 9 ton BPW OFF Road axles, disc brakes ø 430 mm, axles center-mounted with axle load indicator, steel rims 11.75 x 22.5 / ET 0. Kodoynp S Ropfx Aa Eedp

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Kodet Hwt Sjpfx Aa Eodp Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, input voltage: 230 V, water tank capacity: 25 l, KARCHER BR 40/25 C Ep SCRUBBER 400mm cleaning head equipped with new medium-hard cylindrical brushes for use on any surface. New natural rubber squeegees 230V power supply The device is equipped with a new, durable drain hose and a new suction hose. Kdodpfx Aezl Tu Nea Eop The suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: mains Clean/dirty water tank (l): 25/25 Brush pressure (g/cm²): 250 Brush speed (rpm): 1350 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 400mm PPL0.5 cylindrical brushes NEW suction hose NEW drain hose Squeegee blade with new rubbers 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 25-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise suction of the solution from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: used, Metal grating platforms measuring 2.07 x 0.32 meters for sale. Quick and easy to assemble, resistant to various weather conditions, and suitable for safe work at height. Ksdpfx Aaozlz Uks Eodp

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2024, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,060 mm, color: white, Year of construction: 2024, Color: white, RAL 9016 Complete with: - Aluminum chassis - Remote control - Small door in front wall - Wear plates on the floor and side walls - Smartboard - Wabco OptiTire tire pressure monitoring system For more information, contact Mark van der Steen = Further information = Axle configuration Tire size: 385/65R22.5 Axle brand: BPW ECO Air HD Brakes: Disc brakes Suspension: Air suspension Ksdozb A U Eopfx Aa Esdp Rear axle 1: LM rims; lift axle; Max. axle load: 9,000 kg; Tire tread left: 80%; tire tread right: 80% Rear axle 2: LM rims; Max. axle load: 9,000 kg; Tire tread left: 90%; tire tread right: 90% Rear axle 3: LM rims; Max. axle load: 9,000 kg; Tire tread left: 70%; tire tread right: 70% Weights Curb weight: 7,670 kg Payload: 34,330 kg Gross vehicle weight: 42,000 kg Maintenance APK (periodic technical inspection): valid until 10/2026 Identification Registration number: OV-75-NB Further information Please contact Mark van der Steen for more details.

Condition: used, empty load weight: 7,620 kg, maximum load weight: 31,380 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 10/2016, next inspection (TÜV): 01/2027, loading space length: 13,360 mm, loading space width: 2,470 mm, loading space height: 2,640 mm, loading space volume: 87 m³, total length: 13,360 mm, suspension: air, tire size: 385/65 22,5, tire condition: 40 %, color: brown, Year of construction: 2016, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69816 Schwarzmüller, moving floor trailer * Year of manufacture: 2016 * ABS, Anti-lock Braking System * Air suspension * Lift axle * Load securing certificate DIN EN 12642 Code XL * Portal doors * Air connection coupling heads (red + yellow) * Connection plug 2x7-pin * Connection plug 15-pin * Lifting and lowering device * Storage/toolbox * Platform * Sliding tarpaulin * Inspections: Main/Emission test valid until 01.2027 * Suspension: air * Gross weight: 39,000 kg * Unladen weight: 7,620 kg * Payload: 31,380 kg * Permissible gross weight: 39,000 kg * Axle manufacturer: SAF * Tire condition axle 1: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition axle 2: 60% -- 50% - Tire size: 385/65 R22.5 * Tire condition axle 3: 40% -- 30% - Tire size: 385/65 R22.5 * Tire size: 385/65 R22.5 * Internal dimensions: L=13,360 mm, W=2,470 mm, H=2,640 mm * Internal volume*: 87 m³ * Pallet spaces: 33 * Cargo Floor, 8 mm floor thickness * Only used for transporting wood and wood chips * Fifth wheel height: 1,160 mm * LED lighting * Aluminium air tanks * Stainless steel underrun protection * Upon request, we will provide a build description and more pictures Disclaimer: Subject to change, prior sale, and errors. For additional pictures and videos, please visit our website. Kjdpfxsyicipe Aa Eodp Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and uncomplicated financing * Handling of all (export) documents * Arrangement of export plates/customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV certification, registration service * Transit of commercial vehicles Ask our trained professional staff, we will be happy to advise you.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2018, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Kempf Trailer Tires: 385/65R22.5 Sliding floor: Floor in good condition. Kedpszlvm Iofx Aa Ejdp