Used Purete 40-45Sh for sale (21,992)

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm Fodpozcqy Sjfx Ak Uopl thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm Fjdpfxoxab Tco Ak Ujpl total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch Fpodpfjxabntsx Ak Uel - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: new, sheet width 4100 mm plate thickness 13,0 mm ST pre-bending 10,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 11,0 kW weight of the machine ca. 16.000 kg. dimensions of the machine ca. 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes Fodpoxabuyofx Ak Ujpl - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm Fjdpfxjxabhms Ak Uspl total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: excellent (used), Year of construction: 2009, pressure 40.0 t chamfer lenght 1250 mm distance between columns 890 mm work stroke 100 mm dayligth 300 mm column arm 200 mm table width 140 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 90.0 mm/sec tank 63.0 l total power requirement 3.0 kW weight of the machine ca. 2000 kg range L-W-H 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!) Features: - conventional hydraulic press brake - swiveling control unit (front left) - electric backgauge (X-axis) * incl. digital display for gauge position * movement via electric push-buttons (creep and rapid traverse speeds) - manual adjustment of bending depth (Y1 + Y2 axes) * handwheel with analog position indicator Fpodpfx Aezyvbhek Ujl - 2x manually adjustable gauge fingers (R + Z axes) - 1x upper tool - 1x reversible universal die block - pressure gauge / pressure indicator - 1x mobile control unit

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation) Fedpfxsxabumj Ak Uepl

Condition: new, bore capacity in steel (diameter) 40,0 mm throat 320 mm bore stroke 160 mm morse taper 4 MK table: 505 x 425 mm swivelling +/- 50 Grad T-slots 14,0 mm turning speeds 90 - 1455 U/min quill feed 0,1/0,2/0,3 mm/U column diameter 120 mm total power requirement 1,0 / 1,5 kW weight of the machine ca. 380 kg. range L-W-H 500 x 930 x 1870 mm characteristics - Vario drive for precise setting of the speed - Quill infeed either by hand or by mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed can be read quickly and easily using the digital display - Solid, swiveling gray cast iron table with T-slots and coolant channel - The coolant system and lighting are included in the scope of delivery - Adjustable drilling depth stop, drilling depth can be read off using a scale - Right-left rotation device for thread cutting scope of delivery - Drill chuck arbor MK 4 / B 16 - coolant device - Digital speed display - Keyless chuck 1 - 16 mm / B 16 - Reducing sleeve MK 4/3, MK 4/2, MK 3/1 Fsdpfjxaazrjx Ak Uopl - LED machine light - Automatic tool ejector - Height-adjustable protective cover

Condition: good (used), Year of construction: 1997, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK Fodpfx Aozl E T Rok Uepl table: 415 x 350 mm turning speeds 160 - 2.250 U/min column diameter 115 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1920 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Pole-changing motor - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF)

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display Fpjdpoxab Rhefx Ak Uol * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Condition: new, bore capacity in steel (diameter) 40.0 mm threading 30 M workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min column diameter 220 mm column diameter 220 mm table surface area 1210 x 510 mm quill stroke 200 mm feed range - spindle 0.08 - 0.50 mm/U total power requirement 2.2 kW weight of the machine ca. 2800 kg dimensions of the machine ca. 2450 x 1200 x 2720 mm characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control Fpsdpfx Asxaadyek Uol scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,806 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 78 %, battery voltage: 80 V, DGUV certified until: 09/2027, fork length: 2,400 mm, total height: 3,150 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,806 Still 4.0-ton electric forklift with a full cabin and heater, battery at 78%, good tires (rear tires new), telescopic mast with clear view, side shifter, 4th valve, pre-installation for road traffic regulations, fork length 2,400 mm, charger Additional attachments such as fork positioners, rotators, etc., as well as other fork lengths are available upon request. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. We would be happy to arrange an inspection, demonstration, and test drive by telephone appointment. Sales are exclusively to commercial customers; subject to prior sale and errors and omissions. Fedpfxszivgcs Ak Uepl We can deliver your new forklift cost-effectively using our own ramp low-loader (transport costs upon request). You can find more information about us and our other offers on our newly designed website!

Condition: used, axle configuration: 3 axles, first registration: 03/2017, color: other, Year of construction: 2017, Empty weight: 5.710 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Fpodpfxsz Abnle Ak Usl Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, Year of construction: 2023, machine/vehicle number: 15718, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: Fpodpfxoz Aa Hae Ak Ujl - Year of construction: 2023 - Serial number: 15718 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2022, machine/vehicle number: 13180, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2022 - Serial number: 13180 - Bending force: 40 t - Working length: 1300 mm Fsdpfjz Aa E Njx Ak Uepl - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2021, machine/vehicle number: 13900, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: Fpsdpfxoz Aa Eie Ak Usl - Year of construction: 2021 - Serial number: 13900 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2021, machine/vehicle number: 12986, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 12986 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Fedjz Aa Ecopfx Ak Uepl Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, mileage: 8,405 km, power: 243 kW (330.39 HP), first registration: 06/1995, fuel type: diesel, tire size: 295/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, color: yellow, gearing type: mechanical, number of gears: 16, emission class: euro1, suspension: steel, total width: 2,500 mm, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 1,200 mm, Year of construction: 1995, Equipment: crane, Daf CF 85.330 Original Dutch truck, one owner! Only 8,400 km! 6x2 / 10 tires Full spring suspension. 16-speed manual gearbox. Crane: Ferrari 940. A5 4 x hydraulic outriggers. 5 x hydraulic extension. Radio remote control. 2.65 m - 13,700 kg. 4.47 m - 8,300 kg. 6.37 m - 5,700 kg. 8.34 m - 4,100 kg. 10.45 m - 3,050 kg. 12.65 m - 2,300 kg. 14.65 m - 1,800 kg. = Further information = Fjdpoxiwzbofx Ak Uspl Technical information Number of cylinders: 6 Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 295/80R22.5; Steered; Tire tread depth left: 75%; Tire tread depth right: 75% Rear axle 1: Double tires; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Tire size: 295/80R22.5; Double tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Weights Unladen weight: 17,460 kg Payload: 8,540 kg GVW: 26,000 kg Functional Crane: Ferrari Identification Model number: CF 85.330 ATI / 40 t/m CRANE / K = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) / Wouter Greutink (NL-DE-GB-ES-IT) / Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, For sale is a cold-water stripping tank from Platit. The tank has a water connection and a drain connection. Fodpfx Akszz Tb Ie Ujpl

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 4 mm, SOMO SHEARING MACHINE Fpodpfx Akjzz Siwo Uol 4050 X 4 MODEL: SC 40/4 MOTORIZED GAUGE GULLET: 500 HYDRAULIC PRE-CLAMPING DEVICES INSPECTED USED MACHINE, IN WORKING CONDITION INTERNAL CODE: SVR 439

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2020, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Renders Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 History Number of owners: 5 Condition General condition: good Fpjdpfozz Sg Njx Ak Usl Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2021, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2021, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Fpodpfszz Sg Ajx Ak Usl Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 4 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Fpedpfxszz Rpcj Ak Ujl - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, filter Fpodozz Rhrepfx Ak Uel Plates maximum: 100 Plate formats: 400x400 Platefilter features: Electric-Hydraulic press dimension ca. 300x60x110 cm Distance between first plate and spindle approx ca. 160cm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, - 5-axis spindle DRIVE 5C Profi, 12 kW - Work area: 4000 x 1300 mm (X, Y) - Tool changer: 30-position - Drilling units: 12x vertical, 2+4 horizontal Fpedszz N Uqopfx Ak Usl - Projection laser SL LASER Pro Director 6 - Slotted table/magnetic table