Used Pneumatic Gripper Feed for sale (17,833)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Cold Feed Rubber Vacuum Extruder 150mm 20d manufactured by years: 2020 condition in new Equipment type E150-01-00 Screw diameter 150 mm Screw Speed 1-50 r/min Max output Around 1000kg/h Temperature control system The heating section number/power 6kw×7 Application Rubber extrusion mixing and plasticization, and extrude certain size of products in accordance with the machine head External dimensions 4200×1600×1500 (L×W×H)mm Extrusion system The feeding way Side rolls transmission power through the screw, active feeding. Feeding structure Feed roller gear and the screw gear, and with automatic lubricating device. Screw material 38GrMoAcA Screw hardness HRC65-68 hardness of steel sleeve HRC65-70 Nitriding depth 0.4—0.7mm Screw structure With exhaust slot, with good performance of Pressure control With the pressure sensor, pressure protectionvalue 0-35MPA adjustable, also with a temperature sensor L/D 20:1 Cooling section 1 section (side rolls) Vacuum pump power 2.2 KW Kljdpfx Aey Ez Erobfou Temperature control Automatic control heating, cooling by electromagnetic valve Circulating pump brand Weile Cooling water pressure 0.15-2 kg/cm2 Temperature control accuracy ±1℃ Screw and the gear box Involute connection Drive of the motor and the reducer Belt drive Hardened reducer model Reducer (involute) ZLYJ420-28-I speed regulation Frequency conversion 2. Rubber sheet head(Pneumatic) 1 Equipment type E200-PDJT-03-00 2 Equipment use With the use of extruder, extrusion foaming plate for expansion Dimensions 1170×510×330 (L×W×H) mm Head Material 40Cr Heating mode By mold temperature unit, the water cycle control Heat treatment Quenching and tempering, carburizing Surface treatment electroplate runner structure Straight type

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Kjdpfx Asv E Sazebfelu Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: excellent (used), Manufacturer: Graco Type: B05A - 232434 Max. temperature: 50 °C Kljdpfstq Sa Nex Abfou Max. air: 0.7 Mpa, 7 bar, 100 PSi Max. liquid: 16 MPa, 160 bar, 2300 PSi Weight: 20kg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Two-handed operation Kedpfxsvbfbwj Abfolu Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: used, Friulmac Dual Feed Shears and Hydraulic Loader for Scor-nikar? Klodpszb I Idsfx Abfou

Condition: used, Year of construction: 2015, Manufacturer : SPXFLOW Lightnin Model : Mi5P10 Year : 2015   Type: Pneumatic mixer / stirrer Diameter of the agitator: 320 mm Length of the stirring shaft: 915 mm Shaft diameter: 25 mm Required pressure: 6 bar Speed variation: mechanical Manual lifting system / counterweight Lifting stroke: 1680 mm Maximum width of a container: 950 mm Floor>-to-agitator height (lower position): 65 mm Floor-to->top height of the agitator (top position): 1740 mm Kjdpfxszak Iko Abfjlu Dimensions: 111 x 130 x 327 cm   Technical documentation available Video showing the machine in operation in our workshops

Condition: used, - Piston diameter: 50 mm, - Stroke: 100 mm. Ksdpslkciaefx Abfslu

Condition: used, Pneumatic cylinder FESTO DNU-40-125-PPV-A 14137. Klodpfx Aslkchrebfeu

Condition: used, Pneumatic cylinder SAD-30/100. Kledpfxelkcg He Abfou

Condition: new, Made in Italy Machine according to DIN 8606 Center height: 260 mm turning diameter over bed: 520 mm turning diameter over slide: 300 mm center width: 1.500 mm bed width: 400 mm spindle bore: 82 mm spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (option 11 - 2000 rpm) motor power: 5,5 kW (option: 7,5 kW) feed Z-axis: (93) 0,028 - 6,43 mm/rev feed X-axis: (93) 0,012 - 2,73 mm/rev Thread, metric: (54) 0.5 - 224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, modular: (54) 0.5 - 112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P. Cross slide LxW: 650 x 230 mm cross slide stroke: 340 mm top slide LxW: 350 x 150 mm top slide stroke: 150 mm Tailstock spindle diameter: 85 mm Kljdpfx Absdvm Eusfsu tailstock quill stroke: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement pneumatically supported - Acceptance certificate according to DIN 8605, lathe with increased accuracy - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X- and Z-axis - Electrical equipment from high quality brand components e.g. Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed center punches - All safety devices according to CE standards: Rotary chuck guard with plexiglass disc, micro limit switch secured. Rotating chuck guard with Plexiglas disc. Rear splash guard along the entire length. Lead screw and pull screw protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant device - fixed steady rest - travelling steady rest - operating tool, acceptance protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version

Condition: refurbished (used), Year of construction: 2026, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Klodpegmf Rnsfx Abfeu Grinding wheel width: 500 Grinding wheel diameter: 610 CNC: 5 axis (new)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Kljdpjy Urtfjfx Abfsu Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2024, condition: new, The UMG-401.17 equipment set is designed for feeding logs with a diameter of 120–600 mm and a length of 2500–3200 mm to woodworking equipment for further processing. This unit includes a Bruks BR1450 log milling machine and a Valan kone VK100 debarker (adapted to birch wood), a Vecoplan VAZ2000 bark shredder. Safe platforms and stairs around the entire equipment unit ensure convenient access during machine maintenance. The Valan kone debarker is protected from environmental influences by a metal frame house. The line throughput before the debarker is 12 pcs/min, after the debarker feeding to the cutting line is 28 pcs/min. Klsdpjv Uh N Dsfx Abfou

Condition: used, Feed unit WGOMA VS 34 – used – including stand ----- Technical data ----- Rollers: 3 pieces, Number of speeds: 4 Ksdpfxjw Nv N So Abfjlu

Year of construction: 2021, condition: like new (used), Stick handling Biocone -> Stick I/O feed machine Klodpfexmk S Iox Abfeu Manufacturer Biocone Year of purchase 2022 Separate conveyors for in and out (outfeed bagging features) Main layout attached in operation for less than one year

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls Kodpfju Ic Ewox Abfslu model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws i.D. Ksdpfxju Nfr No Abfslu *

Year of construction: 2005, condition: used, Technical details: lifting capacity in kg: 230 kg Kjdpfx Absyzhnlsfslu

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Both pumps = 7.5 kW Weight 164 kg Kljdpfxou N E Hts Abfju *

Condition: used, Technical details: plate width: 400 mm max. stroke: 600 mm control: extern weight of the machine ca.: 0,4 t dimensions L x W x H: 2.7 x 0,8 x 0,62 m Hydraulic sheet feeder, belt feeder Ksdpfeu Iczfox Abfolu External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described. *

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg dimensions of machine: L: 580 x B:280 x H:80 mm Kedpfou Nftgex Abfolu pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. *

Condition: used, Year of construction: 1986, Technical details: Klodju Icgujpfx Abfeu sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: Klodou Nkv Tepfx Abfju Roll lenght: 1200 mm roll diameter: 95 mm total power requirement: 1,5 kW weight of the machine ca.: 2,0 t dimensions L x W x H: 4,3x1,5x0,45 m 2 roller conveyor available - construction type: stable angle iron construction - rolls are driven via motor (380V; 2,15A mit 1400 U/min) - rolls are adjustable - conveyor belt size: 4100x1200mm *

Condition: ready for operation (used), L & Z Lathe WEILER Praktikant 800 R -Turning diameter over bed: 300mm -Turning diameter over cross slide: 150mm -Turning length: 800mm -Spindle bore: approx. 42mm -Speed range: 40 - 2000 rpm -Automatic longitudinal/facing feeds Kedpfx Aezbiyhsbfjlu -Threading / Metric / Inch, etc. -Tailstock: MK 3 -Three-jaw chuck -Chip guard & work light -Chip tray -Change gears -Tool cabinet & operating tools -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1999, Pneumatic press make SCHMIDT Type:ZHS-2/22 year 1999 with two-hand operation. Kledpfeiduvcox Abfsu UVV until 2023.