Used Nordmeccanica Laminating Installation for sale (8,330)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Nwsderp D Nlspfx Afajf Automatic Sheet Seperator UTM-4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 70-100 m/min

Condition: good (used), Year of construction: 2000, Automatic Sheet Feeder Automatic Laminating Unit EK 130/180 Automatic BAT Sheet Seperator Automatic Stacker Nsdpfxjh H Dqhe Afaswf Max. Size : 1300 x 1800 mm Production Capacity Max : 50 m/min Technical data can vary according to job, consumables and possible other factors

Condition: as good as new (ex-display), Year of construction: 2025, CMS Agil Lam Cutting table for Laminated Glas Glas Max. workable Size: 3.810 x 3.300 mm Thickness: 8+8 mm Min. Glas Thickness: 2+2 mm Nwodpfx Aswd If Njfasf

Condition: good (used), Year of construction: 2012, Cooling/filter installation with vacuum filter Function: A vacuum pump directly connected to the filter drum's inner chamber draws the medium into the drum. During this process, contaminants are retained on the filter drum’s surface by a fine-mesh fabric. The vacuum increases due to the resistance caused by the accumulating filter cake. When a preset negative pressure is reached, the drum is automatically rinsed. An installed scraper chain removes the sludge. The system can be controlled either via a PLC controller or directly from the processing machine. Nwedpexrnvuofx Afajf

Condition: excellent (used), Brand new / Showroom machine Automatic roll-fed encapsulation laminator with auto-feed, lamination, and cutting in one process Technical Specifications: Max. Laminating Width: 11" (279 mm) Laminating Speed: 39 inches per minute (approx. 99 cm/min) Maximum Output: Up to 240 sheets per hour Film Thickness Range: 1.5 to 5 mil Feeder Capacity: Up to 200 sheets Power Requirements: 110 V Controller: Digital panel Dimensions (W × L × H): 24" × 19" × 18" (approx. 610 × 483 × 457 mm) Cooling System: Included Stand: Optional Sleep Mode: Activates after 10 minutes Key Features: Compact design fits office or school environments One-button start; stops automatically when job is complete Up to 3x faster than pouch laminators Easy top access for quick cassette changes Integrated internal rotary cutter for safety Digital panel for setting margins and sheet count Film cassette lifts out for easy replacement Ideal for schools, offices, and print shops Nodpowrpd Njfx Afaewf

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Ppsbqkzsrit H Roa I Ssu Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Nedorit H Rspfx Afaewf Fitting accuracy

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Nwodpfx Afowz Ev Teaof Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting Njdpfx Afow Hrrroajwf machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Njdpfow Tyk Isx Afaewf

Condition: as good as new (ex-display), Heating: steam Control panel: ADITEC Base width: 157 cm Base depth: 240 cm Corpus height: 264 cm Min. room height: 320 cm Nedpfx Ajphnz Nsfaswf Recommended room height: 330 cm Smoke-trolley dimensions (HxWxD), cm: 200x100x100 Connected load for HP heating: 60,5 kW Smoke generator width: 50,0 cm

Condition: new, Year of construction: 2025, machine/vehicle number: NON, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,300 mm, Product name: MHL13000 Single-Sided Vertical Squaring Machine Maximum processing length: 13,000 mm Maximum processing width: 1,300 mm Nwsdpfx Afexgb Iaoaef Maximum processing thickness: 230 mm Rated pressure of the hydraulic system: 16 MPa Main pressure cylinder (cylinder diameter x stroke): φ100 x 100; 34 units in total Side pressure cylinder (cylinder diameter x stroke): φ50 x 150; 34 units in total Side lift cylinder (cylinder diameter x stroke): φ63 x 400; 8 units in total Side pressure plate type: Single presser foot Hydraulic motor power: 5.5 kW Hydraulic system: Manual push-button control with pressure holding and automatic pressure compensation Dimensions: 13,300 x 1,300 x 2,300 mm Net weight: Approx. 15 t 1. Relief valve and electromagnetic directional valve: Zhenping Hydraulics 2. Oil pump and motor: Shanghai Volkswagen + Guangdong Juntai 3. Hydraulic cylinders and high-pressure oil lines: Zhengtian, hand-made, with stable quality and high durability 4. Cylinder seals: Taiwan Dingji (high-performance seals)

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Nwedpfx Afswhcfxjasf Format min 20x28cm Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Accu-III Jr. Automatic Sheet Separator, Jogger Catch Tray Delivery

Condition: excellent (used), Year of construction: 2014, 183 USED Complete accessories for Daxner silos. EQUIPMENT: - Flour tank above the bowl - Hopper - Bowl scale Njdpfxoxp Rcre Afajwf - Extractor - Flour catcher - Control - Raw material scale - Water mixer - Pipes - Flour sifter - Flour transport pumps NOTE: Does not include tanks or silos. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Complete Ammonia Refrigeration Installation: Type: Reciprocating Compressor Refrigeration System V1 412 E and VF 612 E Year of manufacture: 2008 Cooling capacity: 760 kW Refrigerant: Ammonia NH3 / R717 Permissible operating pressure: low-pressure side -1/12 bar, high-pressure side -1/17 bar The cooling installation comprises: - 2 GEA Grasso reciprocating refrigeration compressors, consisting of: (1x) Grasso 612E package and (1x) Grasso 412E package - EM Polar pressure vessel, type: DM1600 - Kühlturm GmbH evaporative condenser, type: KIV 2/12-28-12, 2 Njdpjxg Ruiefx Afaowf - Switchgear and control cabinets (2 units) - 3 pallets with valves, plus additional spare parts Grasso 612E package: - 1 unit Grasso/GEA piston compressor, type 612E - Leroy Somer electric motor, 200 kW / 1468 RPM - Dimensions: 3200 mm x 1900 mm x 2150 mm - Cooling capacity: 418.5 kW at -10°C / +40°C - Year of manufacture: 2008 Grasso 412E package: - 1 unit Grasso/GEA piston compressor, type 412E - Leroy Somer electric motor, 132 kW / 1468 RPM - Dimensions: 3200 mm x 1900 mm x 2150 mm - Cooling capacity: 325 kW at -10°C / +40°C - Year of manufacture: 2008 EM Polar pressure vessel: - 1 unit EM Polar pressure vessel, type DM1600 - Capacity: 9580 liters - Dimensions: 5200 mm x 1650 mm x 1900 mm - Empty weight: 2400 kg - Year of manufacture: 2008 Kühlturm GmbH evaporative condenser: - 1 unit evaporative condenser, type KIV 2/12-28-12, 2 - Dimensions (two parts): 6900 mm x 2500 mm x 2500 mm and 3200 mm x 2500 mm x 2150 mm - Cooling capacity: 1098 kW - Year of manufacture: 2008 Further information available on request.

Condition: good (used), Year of construction: 2002, Rondo Laminating and Shaping Line for Yeast Pastries - Smartline and Compactline model - used - year of manufacture: 2002 - length: 15 meters - without tools - components: satellite calibrator, dough rolling cylinder, standard calibrator, work table, cutting station, guillotine, discharge table - machine in production Nsdpfx Afsw Nx S Nsaewf - collection from warehouse / shipping option - price on request

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm Nodpfxovy Aipo Afaowf

Condition: excellent (used), functionality: fully functional, Triple storage installation with filling and discharge system 3 plastic discharge belts Belt width 600 mm Nwedpewulnvjfx Afasf Overall dimensions 8000x12000x4400 mm

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm Nwsdpfx Afextvb Ujaef 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: excellent (used), functionality: fully functional, Natural dye mixing installation Natural dye mixing installation consisting of 2 stainless steel tanks with agitator Internal dimensions: (2x) Ø 590 mm x 850 mm Tank dimensions: (2x) Ø 600 mm x 1650 mm Distributor with 7 valves GEA Tuchenhagen GmbH Dosing pumps Sera GmbH Flowmeter Endress+Hauser type: PROMAG A APV stainless steel control cabinet Nodpfjxb D Tujx Afajwf

Condition: excellent (used), Year of construction: 2011, Year: 2011 Maximum sheet size: 530 × 740 mm Laminating speed: up to 25 m/min Automatic suction feeder Pneumatic roller pressure Automatic film cutting Compatible with gloss, matt, and soft touch films Short changeover time – ideal for short runs Njdpfx Afoxtxd Soaswf

Year of construction: 2015, condition: excellent (used), Direct gravure type A process of coating film or Aluminium with a coating agent or laminating it with another substrate. Line water.solvent based coater plus inline solvent based laminator Product width: Max 1,700mm Materials: 9~50um (PET), 10-60um(CPP), 10~70m (OPP), 20~ 100um (Aluminium) Nwjdswp Saujpfx Afajf Speed: 300mpm (commercial 50-250 mpm) Volume:
 max 900mm Unwinding tension: 100-1,000N 
 Unwinding diametr: max 1,000mm (3in, 6in) Winding tension: 100-1000N Drying
temperature: Max 230°C (4m x 6 Zones)

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Nwodjpaiaiopfx Afaef Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: used, TBMA Galahad bag emptying installation, stainless steel bag emptying machine Type: 750 special All product-contact parts are made of stainless steel. Other parts are coated. Machine is in used condition and sold as is. Equipped with various feed conveyors Optional: empty bag screw compactor Optional: pallet tipper with lifting table Nedpfx Afewvli Aoaswf Capacity: 400 bags/hour See our other advertisements VMA Wekerom

Condition: excellent (used), type of input current: AC, input voltage: 230 V, Equipment: compressor, MATRIX MX 530 DP, double-sided thermal laminator, with foiling attachment. Complete with continuous feeder, touch screen controls, miss feed detector, air operated laminating pressure, auto sheet separation drop sheet delivery. It is a pneumatic model with a built-in compressor for high-quality lamination of digital print. Complete with the gilding attachment and second feed roller for double-side laminating. This machine is in good condition, just serviced and ready for work. We can arrange export packing and transportation. (quotation on request) Our price includes packing on a pallet and loading onto your transport. Payment in GBP in full before loading. Preferred payment method, bank transfer. Please do not hesitate to ask if you need further information. Specifications: Nsder Ddu Ijpfx Afajwf Max sheet size 510 x 640mm Min sheet size 200 x 300mm, Max speed 10m/min Film unwind shaft 75mm dia Temperature range 80-140 deg C Electrically heated laminating roller Electrical supply 220-240V, 50 Hz, 1 ph, 10A Machine weight 260kgs Machine size 1868L v 910W x1 285mmH

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Nwsdpfxowi T Tvs Afajf Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use