Used Muffle Furnaces Up To 650°C for sale (70,756)

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) Hodpfozg Tzxsx Agtofl We would be happy to answer any further questions you may have by telephone.

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Hfodpfx Asvtp Rmsgtel Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 250 Super AutoCut double mitre bandsaw Speed: 18-110 - Mitre left 60° + right 45° - Sliding quick clamping vice - Solid vice + machine casting - Ball bearing rotary table Hfjdpfx Aer Ik Sqjgtol - Hydraulic brake cylinder - Solid, large material support - Automatic cooling system - Worm gear running in oil bath - Closed saw frame - Adjustable ball roller bearings - Tool compartment - door in the base - Cut monitoring by ammeter - Cutting pressure feed regulator - Support roller (infeed side) - Machine base (supplied disassembled) GBS 250 Super AutoCut 3-stage system: I. Automatic lowering of the saw frame via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut II. high-speed lowering of the saw frame to the workpiece, then switch to normal saw feed. (e.g. for scribing) III. Hydraulic cylinder works as brake cylinder: a) Manual operation (e.g. for notching) or b) Lowering in idle state Saw blade dimensions: 2765x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: SM240101, type of input current: three-phase, total width: 3,500 mm, total length: 14,000 mm, input voltage: 380 V, power of the servo motor: 15,500 W, overall weight: 7,000 kg, cutting length (max.): 1,650 mm, For sale: practically new, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME. 2024 model in excellent condition, ideal for high-demand packaging. Type: Automatic Folder Gluer, Bottom Locking Type Year: 2024 Effective Width: 1650 mm Power: 15.5 kW Hedpfxezil Nyo Agtefl Condition: Excellent, like new. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), paper slitting and rewinding machine YYS-I, year 2023, fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019 and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME,manufactured in 2021 are also available for sale.

Condition: new, Siemens 1FT7064-1AK71-1MG1 synchronous motor SN:YFH626116501001, unused in opened original packaging, 100% functional, scope of delivery as per photos. Hsdex Du Afspfx Agtefl

Condition: ready for operation (used), Siemens 1PH5131-4CG40 - main spindle motor SN:E9L81781311005 with 2CW8166-8 blower, Z= K02: vibration level / stage S with single bearing, K20: bearing design / reinforced bearings (FT series), K10: terminal box / terminal box or power connector NDE right, used, normal signs of use, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Hfjdpox Dvt Ejfx Agtol

Condition: ready for operation (used), Siemens 6SC6508-0AA02 / 462 508.9000.02 transistor control unit, used, in good condition, 100% functional, scope of delivery as shown in photos. Hfedpfx Asx Dxfqogtol

Condition: ready for operation (used), Direct-drive main spindle motor for AXA VSC-3-2600-S-SK50 + Deublin 1116-416-208 rotary feedthrough, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Hfodpfx Agek Ru Dgstjl

Condition: ready for operation (used), Indramat 2AD160C-B350A2-BS03-B2V2 Motor - 236 NM / 1500/6000UPM - 37 / 53KW,used, minor signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hfjdet Adpfspfx Agtel

Condition: ready for operation (used), Siemens 6FX1114-6AC00 Coupling module E, condition as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hodpfx Agji Ed Nqjtjfl

Condition: ready for operation (used), Siemens 1PH6137-4CF49 - Z main spindle motor SN:E1W92229001001, Z= see nameplate, used, shows normal signs of use, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and transport! Hfsdpfx Agox Dvvgstsl

Condition: new, Siemens 1PH8137-1FD13-0CH1 main drive motor, serial number as per photo. ATTENTION: Please enquire separately for costs of packaging and shipping! Unused in original packaging, 100% functional, scope of delivery as shown in the photos. Hfedpfjx Dv H Ejx Agtjl

Condition: ready for operation (used), Beckhoff CP6503 built-in panel PC 19", SN:718200-001, used, normal signs of wear, 100% functional, delivery scope as per photos. Hedpfex Eqv Tsx Agtefl

Condition: ready for operation (used), Motorola M68VECPU CPU - board Serial number: G662, used, in good condition, 100% functional, scope of delivery as per photos. Hjdpfxex Et Nio Agtefl

Condition: ready for operation (used), Siemens 1FT6044-4AF71-3SH1 - Z Synchronous servo motor, serial no. YFT433065002001, Z = see nameplate. Used, with normal signs of wear, 100% functional. Scope of supply as shown in the photos. Hjdpjldlq Tofx Agtefl

Condition: ready for operation (used), Siemens 6ES5247-4UA41 Simatic positioning module for stepper motors, condition: used, normal signs of wear, 100% functional. Hfedpfxei Edn Ns Agtel

Condition: ready for operation (used), Fanuc A06B-0235-B605 # S000 AC Servo Motor SN:C056X0650 with A860-2010-T341 Pulse Decoder SN, used, minor signs of wear, 100% functional, scope of delivery as per photos Hedjr Afn Rjpfx Agtsfl

Condition: ready for operation (used), Indramat 2AD180D-B350A1-BS03-D2N1 Asynchronous main drive motor SN: 512 / terminal board defective, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hfsdpsudghlofx Agtjl

Condition: ready for operation (used), Siemens 6ES5247-4UA41 Simatic positioning module for stepper motors, condition: used, normal signs of wear, 100% functional. Hfsdpfx Aei Edn Tegtsl

Condition: ready for operation (used), Fanuc A06B-0146-B077 AC servo motor, serial number: C985A6505 / 3.0 kW 100 Hz, 1500 rpm, used, in good condition, 100% functional, scope of delivery as per photos. Hfsdex Ncafopfx Agtol

Condition: ready for operation (used), Siemens 1FT5062-0AF01-1 - Z AC VSA motor SN:ECO81676501001 , Z= K31: 2nd plate is loose in the terminal box, the plastic sheathing of a connection socket is damaged, see photo,used, normal signs of wear, 100% functional, scope of delivery as per photos Hjdpovabiuefx Agtefl

Condition: ready for operation (used), AMK DH13-120-4-I0F main spindle motor SN: C707AD, professionally fully overhauled and tested, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and shipping! Hsdpfx Aey Nn Hqjgtjfl

Condition: new, Siemens 1PH8137-1FD13-0CH1 main drive motor, serial number as per photo. ATTENTION: Please enquire for packaging and shipping costs separately! Unused in original packaging, 100% functional, scope of delivery as shown in the photos. Hfodpfx Agjx Dv Hxstjl

Condition: used, Year of construction: 2001, Laminating machine – Sheet-to-sheet laminator STOCK – 14R678-1650/P ref 3016 Year: 2001 Max. sheet size: 1650 x 1650 mm Automatic liner feeder Hfsdpfx Agezhmnhetjl Automatic bottom feeder for open flute, E, B, EB Side lay Press band Flip-flop function Stacker PRICE – must be sold quickly!

Condition: excellent (used), functionality: fully functional, Motor power 2.2 kW Manual feed of the aggregates Blade diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Hodpfjy N Ribjx Agtjfl Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Cutting process started by foot pedal Safety switch Width 900 mm, height 1500 mm