Used Markierheld Mh-20 St Industrie 4.0 Xl for sale (61,781)

Condition: good (used), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Clip: 3 HK (hook) Clear width: 2,700 mm Max. load per beam pair: 900 kg, with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Nsdpfxokvnm Aj Ahkswk Additional information about the pallet racking beam: Beam type 4 BST is used to insert chipboard, steel panels, etc., which then end up approximately flush with the top edge of the racking beams. This avoids any height loss. Furthermore, the front of the step beam protects the floors or the insertion segments from damage. The beams are not intended for pallet storage but serve as picking levels; i.e., for storing cartons, small parts, etc.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 Njdpfxjy D Hrzj Ahkewk • Excitation voltage: 98 V • Excitation current: 454 A • Excitation with rotating diodes (brushless) • Water cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system!

Condition: excellent (used), Year of construction: 2017, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2017 CIMC 20FT ISO tank container 25,040L Nwsdpfx Aezdywuohkek L4BN T12 Steam heating Bottom discharge Design temperature: -40/+130°C 2.5Y TEST/CSC valid until 03-2027 = Additional information = General Information Year of manufacture: May 2017 Model year: 2017 Weights Empty weight: 3,660 kg Payload: 32,340 kg Gross weight: 36,000 kg Functional Cargo capacity: 25,000 l Body make: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: K118, Demag / Cranetool Stahlbau Gantry Crane Crane Sky Crane Runway Dimensions approx. 20.3 x 5.2/7.55m with bridge crane Nwedemkfulspfx Ahkek Width with 2 protruding posts + 150 + 80cm Payload/lifting capacity 2500 KG Technical data of the system: Crane track/steel construction consisting of HEA240 HEB220/260 HEM240 - beam Upper bridge 6.45m UK bridge 6.1m Top rails 6.06m UK rails 5.84m Hook height 5.45m Track width 4.96 m Total width outer edge 5.2m / 7.55m Inner edge of steel construction 4.96m Base plate steel construction 43x35 + 60x60cm Support spacing 9.5+10m The system is delivered complete: Steel construction with power supply 1 bridge with 2500 kg Demag DC-Com chain hoist BJ 2017 !!! Documents are available, more pictures on request. Crane is dismantled and available immediately The location of the article is 75053 Gondelsheim Very good condition, see pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Nwedpeyhxl Rsfx Ahkek Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm Nedoxvitvopfx Ahkjwk coil weight max 100kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,297 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! In January 2025, a new spindle was installed by the manufacturer! The machine has been regularly maintained! Previous use: The machine was primarily used for precision machining. Roughing operations were only carried out to a limited extent. TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) Vertical: 10,000 rpm Spindle speed S1 (continuous operation) Universal swivel head 2-axis: 18,000 rpm Vertical milling head: TVS 10,000 Swivel milling head: TU 18,000 Tool holder: HSK 63 A Tool changer: 40 tool positions MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (-15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 99,222 h Program run time: 61,297 h EQUIPMENT High-rigidity gantry design Precise linear guides and ball screws Generous working area with 2.8 m X-axis travel High feed rates for efficient machining Njdpfx Aezb D Aqjhkjwk Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Swiveling milling head with 4th/5th axis Maintenance and service documentation

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller Nodpfjxby Sgox Ahkjwk - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: used, Used YASKAWA industrial robot MH 50. Year of manufacture: 2010. With DX100 control unit. Nodpfx Ahoxhg S Hekewk

Condition: used, functionality: fully functional, machine/vehicle number: 2174, mileage: 948,545 km, power: 375 kW (509.86 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 8,290 kg, overall weight: 18,600 kg, tire size: 295/60(22.5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 10/2026, fuel: diesel, fuel tank capacity: 960 l, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6d, suspension: air, number of beds: 2, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, car registration, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, lane keeping assist, low noise, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, traction control, XXL cab with high roof and 2 beds, pneumatic lifting coupling for standard and mega trailers, EURO 6 D, Alcoa aluminum rims, stationary air conditioning, light bar, air horn, refrigerator, adaptive cruise control, lane keeping assistant, spoiler package, 2 tanks, German vehicle from first owner. Nodey H Dtnepfx Ahkjwk NEW ENGINE at 526,000 km, in 08/2023. Sale only to commercial customers and with exclusion of any warranty. We deliver to any German seaport.

Condition: new, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 [mm] -Bar passage extension on request 25 [mm] - Cross carriages : 4 (pos.1-2-4-5) Nsdeq Nzl Tepfx Ahkowk - Maximum feed length: 100 [mm] - Main spindle speeds : 400 - 4000 [rpm] with threading,400- 5000 [rpm] without threading - Travel time: 0.7 [s] - Cycle time: 1.4 - 60 [s] - Power: 11 [KW] ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT consisting of theAC motors (protection type lP 54), main motor and feed with a PLC programmable Siemens S7-1500 DOCUMENTATION: CE certification with manuals Wiring diagrams I Hard copy + 1 Copy on USB with files in .pdf format EC Directive 2006142lCE - 2014130/EC 2O14I68IUE STANDARD

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer Nwedpfouni D Eox Ahkek 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, functionality: fully functional, A set of 24 industrial axial fans from an active shipyard operation. The set mainly includes large axial fans with protective grilles (see photo), as well as two blue/black high-performance blowers. Suitable for: - Ventilation of halls/workshops - Drying of components, paint booths, renovation sites - Ventilation of construction sites, tunnels/tanks - Event technology, cooling, emergency ventilation - Shipbuilding / shipyards Preferably sold as a set (entire lot). Individual units can be sold separately by arrangement (approx. 100 EUR per unit). All devices are functional, with minor signs of wear typical for shipyard use. Originates from the shipyard operation of Strela Shiprepair GmbH (Stralsund). Njdpfx Aezawhwohkjwk Technical data: - Quantity: 24 units - Design: Axial fan with protective grille - Application: Industry / construction / shipbuilding / event technology - Storage: in wire mesh box (included) - Connection: 230 V / 400 V (mixed assortment, check on site) Collection / Transport: Self-collection in Stralsund. Wire mesh box (steel) included on request. Shipping via freight forwarder on pallets by arrangement (several pallets). Total price 2,400 EUR net, negotiable, for all 24 units + wire mesh box; individual sale approx. 100 EUR/unit. Contact: [NAME], Tel. [TELEPHONE], [EMAIL]

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, Nedpfx Asy Ex T Tjhkowk 533mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: new, empty load weight: 1,100 kg, maximum load weight: 1,400 kg, overall weight: 2,500 kg, loading space length: 5,100 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Sturdy and high-quality sales trailer as a high loader for snacks or goods. Our* snack bar trailers* from the *SELLERH* range are manufactured with an insulated sandwich body. The sturdy steel frame is welded and hot-dip galvanized for high stability. A lockable personal lock in steel and *not in plastic* is installed in the door. The box body is made of 25 mm polyester sandwich in white. The *car trailer* has four crank supports for jacking up the *snack van*. In other words, an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: Nwodpfxjpfcaqe Ahkek *entry door with personal lock lockable*, *step on drawbar*, *sales hatch on the right* with lifting aids lockable from the inside, electrical distribution, stable *crank supports*, *sandwich body* 25mm outside in white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*.

Condition: new, empty load weight: 900 kg, maximum load weight: 1,600 kg, overall weight: 2,500 kg, loading space length: 4,200 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Sturdy and high-quality sales trailer as a high loader for snacks or goods. Our* snack bar trailers* from the *SELLERH* range are manufactured with an insulated sandwich body. The sturdy steel frame is welded and hot-dip galvanized for high stability. A lockable personal lock in steel and *not in plastic* is installed in the door. The box body is made of 25 mm polyester sandwich in white. The *car trailer* has four crank supports for jacking up the *snack van*. In other words, an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales hatch on the right* with lifting aids lockable from the inside, electrical distribution, stable *crank supports*, *sandwich body* 25mm outside in white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*. Nsdpjn Apirsfx Ahkowk

Condition: refurbished (used), Year of construction: 2019, operating hours: 2,357 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 377 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. READY FOR PROFESSIONAL USE Our forklifts are fully overhauled according to FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From frame to battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and refurbished. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspections ✔ 400+ vehicles available ✔ Worldwide transport & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on site and receive personal consultation – we will find the right solution for you. Industrial Truck Data: • Manufacturer: Jungheinrich • Type: Low-lift pallet truck EJE C20 • Drive type: Electric • Load capacity: 2,000 kg • Year of manufacture: 2019 • Operating hours: 2,357 • Lift height: 750 mm • Mast type: None • Initial lift: Yes • Overall width: 720 mm • Overall height: 1,300 mm • Fork length: 1,150 mm • Unladen weight: 377 kg • Load centre: 575 mm • Tyres: Polyurethane • Model type: EJE C20 Nwodpfxey Rpg Uo Ahksk • Battery type: Gel • Voltage: 24 V • Battery weight: 196 kg • Charger: Not included

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Nwjdpfjy Rnr Aox Ahkjk Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 627 mm, Tested Forklift Battery for Your Truck - 48V 5PZS 625AH - DIN A + 1-year warranty + Includes aquamatic water filling system + Includes end connector & REMA 320 plug (other plugs can be installed upon request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 827 mm Width 627 mm Height 625 mm Weight: approx. 860 kg Suitable for the following models and more: Linde E15 S- 355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16 - 386-02 - side battery change Linde E16 C - 1275-00 Linde E16 C - 335-00 Linde E16 L - 335-00 Linde E16 P - 1275-00 Linde E16 P - 386-00 Linde E16 P - 386-02 - side battery change Linde E18 - 335-00 Linde E18 - 386-00 Linde E18 - 386-02 - side battery change Linde E18 C - 335-00 Linde E20 L - 386-00 Linde EG 16-1275-02 - side battery change Linde EG16 H -1275-02 - side battery change Linde EG16 P -1275-02 - side battery change Linde EG16 PH -1275-02 - side battery change Linde EG20 PH -1275-02 - side battery change Linde T30 R - 143-00 Still R20-15 Still R20-16 Still R20-18 Still RX20-15 Jungheinrich EFG Series Jungheinrich EFG 18 Jungheinrich EFG 216 Jungheinrich EFG 216 k Jungheinrich EFG 218 Jungheinrich EFG 218 k Jungheinrich EFG 316 Jungheinrich EFG 316 k Jungheinrich EFG 318 Jungheinrich EFG 318 k Jungheinrich EFG DF 16 Jungheinrich EFG DF V16 Toyota 7FBE15 Toyota 7FBEF15 Toyota 8FBEK16T Toyota 8FBEK18T Toyota /BT CB 1600 Crown SC1018 Crown SC3240 -1.8 Njdpfx Ahjy Rnmmekswk Crown 5340 - 1 Caterpillar EP 16CPNT Caterpillar EP 16CPN Caterpillar EP 16C Caterpillar EP18CPNT Cesab Blitz 416 Daewoo B16X-5 Clark GEX 18/20S Clark GTX18 Clark GTX20S Doca7H Hyster J1.8XNT Komatsu FB18M Mitsubishi FB16 Nichiyu FBT15P Nichiyu FBT15P-75 Nissan G1N1 TX16 OM-Pimespo-Fiat XE 18 Yale ERP 16VT Standard battery sizes available, please inquire. Transport available.

Condition: refurbished (used), Year of construction: 2014, operating hours: 18,011 h, load capacity: 2,000 kg, lifting height: 3,800 mm, fuel type: gas, mast type: duplex, construction height: 2,500 mm, fork length: 1,200 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers, fully maintained, tested, and reconditioned by us according to FEM-4.004 (UVV) standards. • Over 350 units in stock • Custom modifications of any kind possible upon customer request • International transport with suitable vehicles and customs processing upon request • See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise • Full functionality as per FEM-4.004 • Inspected & tested (C5 test) batteries in electric equipment (minimum 70% capacity) Nwsdpfey Rm Hlex Ahkek

Condition: used, Year of construction: 2014, operating hours: 14,877 h, load capacity: 2,000 kg, lifting height: 3,800 mm, load center: 500 mm, fuel type: gas, mast type: duplex, construction height: 2,380 mm, fork length: 1,200 mm, empty load weight: 3,750 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REMADE FOR ACTION Nwsdpfsy Rm Aaox Ahkek WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Pre-owned industrial trucks from select premium manufacturers – fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (UVV) standards. - Over 350 vehicles in stock - Custom modifications of any kind available upon customer request - International transport with suitable vehicles and customs clearance available upon request - See for yourself and visit us at our facility Friedmann Forklifts – Our Quality Promise - Fully operational according to FEM-4.004 - Serviced & tested batteries (C5-test) on electric units (minimum 70% capacity) - Serviceable tires as per FEM-4.004 (minimum 70% tread depth) - Mast, carriage, attachments, and hydraulic system/hoses inspected - Steering axle safety inspected - Forks and lift chains inspected - As-new driver seat and safety belt - New paint in OEM colors and original decals Industrial Truck Data - Manufacturer: Jungheinrich - Model: Counterbalance Forklift TFG 320s - Drive type: LPG (liquefied petroleum gas) - Load capacity: 2,000 kg - Year of manufacture: 2014 - Operating hours: 14,877 - Lift height: 3,800 mm - Mast type: Duplex - Overall height: 2,380 mm - Fork length: 1,200 mm - Unladen weight: 3,750 kg - Load center: 500 mm - Tires: Solid rubber

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Nwsdpfx Asy Exqlehkek Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,800 mm, table width: 2,000 mm, feed length W-axis: 700 mm, workpiece weight (max.): 12,000 kg, milling spindle length: 700 mm, FPT CASTEL RED HEIDENHEIN TNC 430. Built in 2007. X=3100mm Y=2000mm Z=1000mm Table 2000 x 1800 mm, 12 Ton Cooling through spindle. X Column travel 3,100 mm Y Headstock vertical travel 2,000 mm Z spindle stroke 700 mm Nwodewdiu Eopfx Ahkok W Column in spindle direction 1,000 mm Spindle diameter 130 mm Spindle diameter ISO 50 Spindle speed 3000 rpm Spindle motor 37 kW Rotary table size 1,800 x 2,000 mm Table load 12 tons C-axes 360,000°

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, Important information: Auction extended by 14 days. Controller has been subsequently identified as HEIDENHAIN iTNC 530. Previous specification: TNC 426. A new spindle was installed in January 2025! The machine has been regularly maintained! TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) vertical: 10,000 rpm Spindle speed S1 (continuous operation) universal swivel head 2-axis: 18,000 rpm MACHINE DETAILS Nsdey Dgyfopfx Ahkswk CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (–15%, +10%) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design Precision linear guides and ball screws Generous workspace with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, die, and machine building Documentation and acceptance certificate according to ISO standards Tool changer Cooling system Chip conveyor Swiveling milling head with 4th/5th axis

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Nwjdpfehyuglsx Ahkok Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop