Used Markierheld Mh-20 St Industrie 4.0 Xl for sale (60,953)

Condition: ready for operation (used), Bosch SE-B2.020.060-04.000 Brushless servo motor with brake and Heidenhain ERN 221.2123-500 encoder, ID No. 270 675 02, serial number as per photo, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 14 mm, used. Nedpji D Hdkofx Alnjcu

Condition: ready for operation (used), Bosch SE-B2.020.060-14.000 Brushless servo motor, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Nedpfx Aloi D Hdrenscu

Condition: ready for operation (used), Bosch SD-B4.140.020-04.000, brushless, permanent magnet servo motor, serial number: 946000756, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nedpfxoi D E T Ns Alnocu

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A • Frequency: 50 Hz • Rated speed: 1500 rpm Nsdpfx Asy D Hrzjlnscu • Power factor: 0.8 • Excitation voltage: 98 V • Excitation current: 454 A • Excitation with rotating diodes (brushless) • Water cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system!

Condition: excellent (used), Year of construction: 2017, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2017 CIMC 20FT ISO tank container 25,040L L4BN T12 Steam heating Bottom discharge Design temperature: -40/+130°C 2.5Y TEST/CSC valid until 03-2027 Ncjdpfjzdywujx Alnsu = Additional information = General Information Year of manufacture: May 2017 Model year: 2017 Weights Empty weight: 3,660 kg Payload: 32,340 kg Gross weight: 36,000 kg Functional Cargo capacity: 25,000 l Body make: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: K118, Demag / Cranetool Stahlbau Gantry Crane Crane Sky Crane Runway Dimensions approx. 20.3 x 5.2/7.55m with bridge crane Width with 2 protruding posts + 150 + 80cm Payload/lifting capacity 2500 KG Technical data of the system: Crane track/steel construction consisting of HEA240 HEB220/260 HEM240 - beam Upper bridge 6.45m UK bridge 6.1m Top rails 6.06m UK rails 5.84m Hook height 5.45m Track width 4.96 m Total width outer edge 5.2m / 7.55m Inner edge of steel construction 4.96m Base plate steel construction 43x35 + 60x60cm Support spacing 9.5+10m The system is delivered complete: Steel construction with power supply 1 bridge with 2500 kg Demag DC-Com chain hoist BJ 2017 !!! Documents are available, more pictures on request. Crane is dismantled and available immediately The location of the article is 75053 Gondelsheim Very good condition, see pictures Nedpfx Aljmkfuljnscu Dispatch by forwarding agent or pick-up only by appointment

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Box profile: 80|53 x 45|25 mm Crossbeam type: 4 BST Step profile: H 28 mm, W 20 mm Nodpfxokv Urwo Alnocu Clips: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of crossbeams: 900 kg, with evenly distributed load 02x Securing pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Further information on the pallet racking crossbeam: Crossbeam type 4 BST is used to insert chipboard, steel panels, or similar materials, which then end up approximately flush with the top edge of the racking crossbeams. This prevents any height loss; furthermore, the front of the step crossbeam protects the floors or the insertion segments from damage. The crossbeams are not intended for pallet storage, but rather as picking levels; i.e., for storing boxes, small parts, or similar items.

Condition: good (used), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: Ncjdokvnm Aepfx Alnsu 01x Pallet racking beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Clip: 3 HK (hook) Clear width: 2,700 mm Max. load per beam pair: 900 kg, with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Additional information about the pallet racking beam: Beam type 4 BST is used to insert chipboard, steel panels, etc., which then end up approximately flush with the top edge of the racking beams. This avoids any height loss. Furthermore, the front of the step beam protects the floors or the insertion segments from damage. The beams are not intended for pallet storage but serve as picking levels; i.e., for storing cartons, small parts, etc.

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg Ncsdpfsxvitvox Alnju

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm Ncjdpfx Aexby Sgslneu - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: used, Used YASKAWA industrial robot MH 50. Year of manufacture: 2010. With DX100 control unit. Nsdpfsxhg S Hox Alnocu

Condition: used, mileage: 999,318 km, power: 309 kW (420.12 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 7,921 kg, maximum load weight: 10,079 kg, overall weight: 18,000 kg, tire size: 315/70 22,5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,600 mm, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 1, Year of construction: 2019, operating hours: 999,318 h, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, sliding door, spoiler, truck registration, Vehicle number for inquiries: 41041 MAN, TGX * Year of manufacture: 2019 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Power windows * Cab * Automatic climate control * Air suspension * Navigation system * Power steering * Sleeper cab * Heated seats * Auxiliary heater * Cruise control * On-board computer * Differential lock * Long-haul transport > 7.5 tons * Digital tachograph * CB radio * Bluetooth * Sound system * Distance assist * Refrigerator * Electric windows and mirrors * 2 bunks * 2 x diesel tank * AdBlue tank * Roof spoiler * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Lane change warning system Ncjdpfx Alsyy H Emsnsu * Collision warning system * Transmission type: Automatic * Suspension: Air / Air * Gross vehicle weight: 18,000 kg * Tare weight: 7,921 kg * Payload: 10,079 kg * Permissible gross vehicle weight: 18,000 kg * Tire condition 1st axle: 50% - 40% - Tire size: 315/70 R22.5 * Tire condition 2nd axle: 30% | 30% - 30% | 30% - Tire size: 315/70 R22.5 * Wheelbase: 3600 mm * Tire sizes: 315/70 R22.5 * Adjustable fifth wheel * Furniture transport * Used for lightweight goods transport Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, functionality: fully functional, machine/vehicle number: 2174, mileage: 948,545 km, power: 375 kW (509.86 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 8,290 kg, overall weight: 18,600 kg, tire size: 295/60(22.5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 10/2026, fuel: diesel, fuel tank capacity: 960 l, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6d, suspension: air, number of beds: 2, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, car registration, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, lane keeping assist, low noise, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, traction control, XXL cab with high roof and 2 beds, pneumatic lifting coupling for standard and mega trailers, EURO 6 D, Alcoa aluminum rims, stationary air conditioning, light bar, air horn, refrigerator, adaptive cruise control, lane keeping assistant, spoiler package, 2 tanks, German vehicle from first owner. NEW ENGINE at 526,000 km, in 08/2023. Ncedpfx Aloy H Dtnjneu Sale only to commercial customers and with exclusion of any warranty. We deliver to any German seaport.

Condition: used, mileage: 441,000 km, power: 235 kW (319.51 HP), first registration: 04/2015, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: other, driver cabin: other, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, electric window regulation, power assisted steering, power mirror, tail-lift, = Additional options and accessories = - Disc brakes - Immobilizer - Radio - Radio CD player - Steering axle - Toolbox = Remarks = Volvo FE320, with COC! 2015, 441000km, 6x2 with steering axle, Air conditioning, Chereau refrigerated box with rear doors, Carrier refrigeration engine, Data printer, Rear camera, Tail lift 2500 kg = More information = Cab: half sleeper Front axle: Steering Rear axle 1: Double wheels Ncodpfezbmqdjx Alneu Rear axle 2: Steering GVW: 27.000 kg Make of bodywork: Chereau Cooling engine: diesel and electric = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, saw blade diameter: 350 mm, feed rate X-axis: 20 m/min, total length: 7,690 mm, total height: 1,650 mm, overall weight: 210 kg, saw blade speed: 90 rpm, rotational speed (min.): 90 rpm, rotational speed (max.): 90 rpm, space requirement height: 1,670 mm, space requirement width: 1,600 mm, cutting length (max.): 5,000 mm, HSS blades, Ø 350 mm – thickness 2.5 mm – 2-speed motors: 2.2 / 1.4 kW – 1440 / 720 rpm – Blade rotation at 4 speeds: 15 – 30 – 45 – 90 rpm Work table, pneumatically rotating from 90° to 45° (internal angles) Vertically sliding head Automatic positioning of the moving head (manual mode possible) Moving head travel speed: 20 m/min Ncedpfx Aljzbhq Ejnou Minimum cutting capacity: 480 mm Maximum cutting capacity: 5000 mm Total power: 5 kW Pneumatic vertical and horizontal vices with anti-opening safety feature Micro-drop cutting lubrication

Condition: new, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 [mm] -Bar passage extension on request 25 [mm] - Cross carriages : 4 (pos.1-2-4-5) - Maximum feed length: 100 [mm] - Main spindle speeds : 400 - 4000 [rpm] with threading,400- 5000 [rpm] without threading - Travel time: 0.7 [s] - Cycle time: 1.4 - 60 [s] Ncodpfxsq Nzl To Alneu - Power: 11 [KW] ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT consisting of theAC motors (protection type lP 54), main motor and feed with a PLC programmable Siemens S7-1500 DOCUMENTATION: CE certification with manuals Wiring diagrams I Hard copy + 1 Copy on USB with files in .pdf format EC Directive 2006142lCE - 2014130/EC 2O14I68IUE STANDARD

Condition: used, functionality: fully functional, A set of 24 industrial axial fans from an active shipyard operation. The set mainly includes large axial fans with protective grilles (see photo), as well as two blue/black high-performance blowers. Suitable for: - Ventilation of halls/workshops - Drying of components, paint booths, renovation sites - Ventilation of construction sites, tunnels/tanks - Event technology, cooling, emergency ventilation - Shipbuilding / shipyards Preferably sold as a set (entire lot). Individual units can be sold separately by arrangement (approx. 100 EUR per unit). All devices are functional, with minor signs of wear typical for shipyard use. Originates from the shipyard operation of Strela Shiprepair GmbH (Stralsund). Ncedpjzawhwsfx Alneu Technical data: - Quantity: 24 units - Design: Axial fan with protective grille - Application: Industry / construction / shipbuilding / event technology - Storage: in wire mesh box (included) - Connection: 230 V / 400 V (mixed assortment, check on site) Collection / Transport: Self-collection in Stralsund. Wire mesh box (steel) included on request. Shipping via freight forwarder on pallets by arrangement (several pallets). Total price 2,400 EUR net, negotiable, for all 24 units + wire mesh box; individual sale approx. 100 EUR/unit. Contact: [NAME], Tel. [TELEPHONE], [EMAIL]

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Nodpfx Ajyhxl Rjlnocu Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: used, axle configuration: 2 axles, first registration: 10/2021, loading space length: 13,600 mm, loading space width: 2,440 mm, loading space height: 2,670 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, color: other, Year of construction: 2021, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Dual tires, Tare weight: 7480 kg, Gross weight: 35000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2021, Axle type: SAF, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 1500 kg, Tail lift material: Aluminum, Tail lift size: 200x254, MAKE IS KEL-BERG / TRIDEC STEERING / TAILLIFT = Additional Information = General information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 275/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Dual tires; Lift axle; Tire tread depth left inner: 9 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 7 mm; Tire tread depth right outer: 8 mm Axle 2: Dual tires; Steered; Tire tread depth left inner: 9 mm; Tire tread depth left outer: 12 mm; Tire tread depth right inner: 12 mm; Tire tread depth right outer: 13 mm Weights Tare weight: 7,480 kg Payload: 27,520 kg GVW: 35,000 kg Functional Tail lift: Rear door, 1500 kg Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial information Leasing price: 326 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • Good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Nsdpfx Aleyz Nt Nsnscu Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Nsdpfeuni D Ejx Alnocu Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 10/2007, total length: 13,900 mm, total width: 2,550 mm, suspension: air, tire condition: 40 %, wheelbase: 8,910 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes = More information = Axle configuration Make axles: BPW Tyre profile: 40% Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Njdpfxsy Sxzdo Alnjcu Weights Empty weight: 8.600 kg Carrying capacity: 23.400 kg GVW: 32.000 kg Maintenance APK (MOT): tested until 08/2026 Identification Registration number: OJ-68-ZK

Condition: new, empty load weight: 1,100 kg, maximum load weight: 1,400 kg, overall weight: 2,500 kg, loading space length: 5,100 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Sturdy and high-quality sales trailer as a high loader for snacks or goods. Our* snack bar trailers* from the *SELLERH* range are manufactured with an insulated sandwich body. The sturdy steel frame is welded and hot-dip galvanized for high stability. A lockable personal lock in steel and *not in plastic* is installed in the door. The box body is made of 25 mm polyester sandwich in white. The *car trailer* has four crank supports for jacking up the *snack van*. In other words, an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales hatch on the right* with lifting aids lockable from the inside, electrical distribution, stable *crank supports*, *sandwich body* 25mm outside in white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Ncedpfxepfcaqj Alnou As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*.

Condition: new, empty load weight: 900 kg, maximum load weight: 1,600 kg, overall weight: 2,500 kg, loading space length: 4,200 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Sturdy and high-quality sales trailer as a high loader for snacks or goods. Our* snack bar trailers* from the *SELLERH* range are manufactured with an insulated sandwich body. The sturdy steel frame is welded and hot-dip galvanized for high stability. A lockable personal lock in steel and *not in plastic* is installed in the door. The box body is made of 25 mm polyester sandwich in white. The *car trailer* has four crank supports for jacking up the *snack van*. Nodpfen Apirjx Alnjcu In other words, an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales hatch on the right* with lifting aids lockable from the inside, electrical distribution, stable *crank supports*, *sandwich body* 25mm outside in white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*.

Condition: refurbished (used), Year of construction: 2019, operating hours: 2,935 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 377 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled in accordance with FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering and electrics – every unit is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance Njdpsy Rph Ssfx Alnocu ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test onsite and receive a consultation now – we will find the right solution for you. Industrial Truck Specification: • Manufacturer: Jungheinrich • Model: Low Lift Pallet Truck EJE C20 • Drive type: Electric • Load capacity: 2,000 kg • Year of manufacture: 2019 • Operating hours: 2,935 • Lift height: 750 mm • Mast type: None • Free lift: No • Initial lift: Yes • Overall width: 725 mm • Overall height: 1,300 mm • Fork length: 1,150 mm • Unladen weight: 377 kg • Load center: 575 mm • Tyres: Polyurethane • Model variant: EJE C20 • Battery type: Gel • Voltage: 24 V • Battery weight: 196 kg • Charger: Not included

Condition: refurbished (used), Year of construction: 2019, operating hours: 2,357 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 377 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. READY FOR PROFESSIONAL USE Our forklifts are fully overhauled according to FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From frame to battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and refurbished. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspections ✔ 400+ vehicles available ✔ Worldwide transport & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on site and receive personal consultation – we will find the right solution for you. Nodpfxjy Rpg Ue Alnjcu Industrial Truck Data: • Manufacturer: Jungheinrich • Type: Low-lift pallet truck EJE C20 • Drive type: Electric • Load capacity: 2,000 kg • Year of manufacture: 2019 • Operating hours: 2,357 • Lift height: 750 mm • Mast type: None • Initial lift: Yes • Overall width: 720 mm • Overall height: 1,300 mm • Fork length: 1,150 mm • Unladen weight: 377 kg • Load centre: 575 mm • Tyres: Polyurethane • Model type: EJE C20 • Battery type: Gel • Voltage: 24 V • Battery weight: 196 kg • Charger: Not included