Used Homag Kal 211 Edition 2264 for sale (2,164)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation Ksdsyw Ndmepfx Alfjlr - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Year of manufacture: 2012 Units controlled from display Jointing unit: 2 x 2.2 kW Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Flush milling unit: 2 x 0.27 kW Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Kljdjyy S Adspfx Alfer Workpiece thickness: 8-60 mm Feed speed: 11 m/min Total power: 16 kW Length: 4150 mm

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) recently added (in a technological "revamping" operation) Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) Klodpfx Ajinigmslfsr M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Model. TFU200/L/30/12/S

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system Kjdpfjywxrajx Alfjlr 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Year of construction: 2019, condition: like new (used), functionality: fully functional, Box On Demand, Endless Corrugated Board, pay attention to your CO2 footprint, The machine listed here for processing endless corrugated board belongs to the series of static machines, i.e., operations across the machine are carried out while the carton is stationary. The machine is designed for high productivity. The maximum working width of the carton is 1,500 mm. All tool settings are made automatically. 1) Main Machine Body (Carton Cutting Automaton): Linear cross-cutting and cross-creasing unit for head-to-foot processing on the carton. 8 longitudinal creasing/cutting units from above for longitudinal creases and cuts in the carton 2) Double Carton Magazines 2 carton magazines provide for the supply and feeding of raw carton material to the processing machine. Stack height for endless corrugated board up to max. 2,000 mm possible Kledpfxoyy Iqkj Alfor 3) Control Cabinet, Control System, Electronics: Contains all components required for operation and control of the system. Control cabinet components are based on HOMAG standard.

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Klodpfoyyxc Rjx Alfjr

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Ksdpfxjyym Sae Alfelr

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Klsdpfx Alsx A Th Djfsr Corner Rounding Unit: yes Operating Units: 7 nr

Condition: used, machine/vehicle number: 008323, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Klsdpfx Alsx Hpkxofer Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008324, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 7000 mm Panel return for edgebander: Right Klodpfx Aex Hpkrslfsr

Condition: used, machine/vehicle number: 006064, Squaring: First and Second Pass Max Panel Thickness: 85 mm Max feed speed: 26 m/min Distance between dogs: 1000 mm Kljdpolw A D Tsfx Alfer

Condition: used, machine/vehicle number: 008245, Max. panel width: 1000 mm Kljdpeywad Rofx Alfsr Max. panel length: 2500 mm Length of conveyor: 9385 mm Panel return for edgebander: Left

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max feed speed: 40 m/min Kjdjyilxmopfx Alfelr Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Klodpfxjygtbms Alfsr Max. panel length: 2500 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Kljdpfxjyv Ev As Alfjr Total installed power (Kw) 35

Condition: excellent (used), functionality: fully functional, Equipment: CE marking, documentation/manual, double-sided, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm Klodpfxoxwui Ee Alfjr

Condition: used, Year of construction: 2003, machine/vehicle number: KL 77/A20/S2, functionality: fully functional, feed rate X-axis: 20 m/min, total length: 9,000 mm, Equipment: documentation/manual, We are offering this used HOMAG Optimat kL 77/A20/S2 EVENT edge bander, year of manufacture 2003. Manufacturer: HOMAG Model: Optimat kL 77/A20/S2 EVENT Year of manufacture: 2003 Condition: used Type: edge bander Edge bander for sale due to purchase of a new machine. The machine is currently still in use and fully operational. It is a very robust machine, including a return system. Very stable and always delivers a perfect finish! Equipment: - Nozzles - Format cutters, 100mm diameter - Blow-off unit - Preheating unit - PUR bonding with cartridge heating station - 7 pressure rollers - Crosscut saws, straight and mitre - Top and bottom roughing cutters - Profile cutters, radius 1/2mm - Profile/flat scrapers - Nozzles - Polishing brushes - Machine equipped with top and bottom belts (very stable design) - Height adjustable at the front (automatic) - Profile cutters automatically adjustable via the program - Crosscut saws automatic Kjdpfeyw N Apox Alfslr - All functions can be switched on/off via the front screen - Return conveyor operated from the PC ->Demo available upon request! Price to be discussed via private message. Please do not hesitate to contact me if you have any questions. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode Kljdeyv Da Hopfx Alfer - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Year of construction: 2009, condition: good (used), functionality: fully functional, machine/vehicle number: 0-286-21-0481, BARGSTEDT automatic panel storage system Base area: 26 x 10.5 m Overall height: 3.75 m (to top edge of crane) Stacking height: max. 2.5 m Kjdpfsyv Axnjx Alfjlr The storage system can be used for flexible feeding of a panel saw, a nesting machine, or as a convenient panel warehouse with automatic retrieval. Storage positions are freely programmable. Important: The control software was updated in 2019 to TLF woodStore, version 7.12.6.0.

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Complete Production Ksdpfx Aox D Dq Selfslr

Year of construction: 2015, condition: ready for operation (used), This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. Kodpsx D Ra Hefx Alfslr Application Types CNC Wood Machining

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 3 Kjdpfox D Nvgjx Alfolr This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2006, This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine. Additional equipment • Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW • PUR Nordson Melting Station / Tool Set / Suction Tube Machine Benefits Technical Machine Benefits • Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg • Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm • Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm • Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Kjdox U Uzropfx Alfelr • Minimum workpiece gap: 500 mm

Condition: ready for operation (used), Year of construction: 2009, Edgebander manufactured in 2009. This HOMAG PROFI KAR310/11/A20/S2 features a work piece return system BARBARIC. Consider the opportunity to buy this HOMAG PROFI KAR310/11/A20/S2 edgebander. Contact us for further details. • Condition: Used Additional equipment Klodpfjyhqi Dox Alfor • BARBARIC workpiece return system

Year of construction: 2019, condition: ready for operation (used), spindle speed (max.): 8,000 rpm, This HOMAG Optimat LPP306 was manufactured in 2019. A used planing and profiling machine featuring six working spindles, it handles workpiece widths up to 250 mm and heights up to 160 mm. Equipped with PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Contact us for more information about this machine. • Workpiece width after processing: 10–250 mm • Workpiece height after processing: 10–160 mm • Control: PowerControl with powerTouch LPP300 • Feed table length: 2,500 mm • Feed speed: 6–24 m/minSpindles: • First lower spindle: • Motor power: 7.5 kW (Siemens IE3) • Speed: 6,000 rpm • Spindle diameter: 40 mm • Spindle length: 281 mm Kjdoygvnpjpfx Alfslr • First right spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First left spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First upper spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm • Second upper spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Second lower spindle: • Motor power: 7.5 kW, speed infinitely variable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm