Used Hbm Hbm 40 for sale (21,434)

Condition: new, bore capacity in steel (diameter) 16 mm throat 170 mm bore stroke 50 mm 16 mm spindle taper MK2 spindle turning speed range 50 - 2250 U/min 320 mm 145 mm table surface area 500 x 140 mm connected load frequency 230 V total power requirement 0,5 kW weight of the machine ca. 90 Kg dimensions of the machine ca. 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch Nedpfoupxmrsx Afaecr - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!

Condition: new, 0 830 x 530 x 530 mm Ncjdpfxoupw Sgj Afaer operating pressure 2,2 - 5,5 bar Air consumption 250 l/min. weight of the machine ca. 50 Kg 0,95 x 0,65 x ,7 cm

Condition: new, table length 855 mm table width 500 mm stroke height 900 mm 340 mm Njdpfxsupw Uho Afajcr weight max. in kg 500 kg weight of the machine ca. 0,085 t 950 x 550 x 450 mm The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 125 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. Njdpfx Afoupxctoaocr spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.

Condition: new, sheet width 1020 mm plate thickness 2,5 mm Njdpfx Aeupxf Uofaecr distance between columns 1050 mm daylight opening mm 135 ° total power requirement Handbetrieben kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,4 x 0,6 x 1,3 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad Ncsdpfx Ajvn U Adjfaer angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: new, turning diameter over bed 280 mm turning diameter over slide rest 158 mm turning length 600 mm turning speeds 45 - 2000 U/min centre height 140 mm spindle bore 26 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,25 - 2,5 mm thread - inch 6 - 96 TPI connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,16 t dimensions of the machine ca. 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck - 4-jaw chuck Nsdpfxsvu Hane Afajcr - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel - Splash guard - Machine light

Condition: new, capacity 90 degrees: round 130 mm capacity 90 degrees: square 127 x 127 mm dimensions of saw-band 1140 x 13 x 0,65 mm band speed max. 144 m/min total power requirement 1,1 kW weight of the machine ca. 15 kg dimensions 500 x 300 x 400 m Portable and removable metal band saw Special features Powerful with 1100 watts. Including 2 saw bands, work table and integrated LED lighting. With adjustable, variable handle. Light and handy. Nodsupw N Espfx Afajcr For universal work in the workshop, on the construction site or for private use.

Condition: new, sheet width 1270 mm Ncjdpfsupxcgex Afajr plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW Ncedpfoupxcyex Afasr weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, grinding range 2 - 13 mm Ncsdpfx Aoupxdqefasr sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, 0 199,5 x 67,5 x 64 mm operating pressure 2,5 - 8,0 bar air consumption at 6 bar 350 l/min weight of the machine ca. 0,23 t dimensions 2,10 x 1,30 x 0,88 m Duo blast cabinet Nedpfsupxfzsx Afaecr 10 PET sheets to protect the windows 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns 6 ceramic nozzle inserts (6 mm diameter)

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 m/sec total power requirement 3 kW weight of the machine ca. 70 t dimensions of the machine ca. 1,2 x 0,5 x 0,75 m Belt sander with Ncsdpfsupxg Ejx Afaor - Contact disc: 600 x 75 mm

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 220 mm turning length 600 mm turning diameter in the gap 320 mm turning speeds 60 - 1650 U/min centre height 160 mm spindle bore 38 mm tailstock quill taper MT 3 MK connected load frequency 400 V total power requirement 1,1 kW weight of the machine ca. 340 Kg dimensions of the machine ca. 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Nsdpfxsupxlne Afaecr Forage protection Set of change gears Machine tools

Condition: new, table length 820 mm table width 520 mm stroke height 730 mm weight max. in kg 300 kg Nsdpfx Afoupxlueaecr 260 mm weight of the machine ca. 0,065 t dimensions of the machine ca. 1,0 x 0,6 x 0,82 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: new, range L-W-H 790 x 460 x 960 mm weight 70 kg 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4" premium ratchet. 1/4" knee joint 45 mm. 1/4" extension 100mm. 1/4" socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. 3/8" knee joint 55 mm. Ncjdpfou Imnpox Afaor 3/8" extension 150mm. 3/8" socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" knee joint 75 mm. 1/2" extension 125mm. 1/2" Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2" Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm. - DRAWER 3 1/4" arbor drill TT8, TT9, TT110, TT20, TT25, TT27, TT30, TT40. 1/4" plug-in bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" plug-in bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" recording bits S0, S1, S2, S3, S4. 1/4" locating drill V6, V8, V10. 1/4" locating drill H6. 1/4" receiving bits FD4, FD5.5, FD6, FD7. 1/4" recording bits PH1, PH2, PH3. 1/4" pickup bits PZ0, PZ1, PZ2, PZ3. 1/4" recording bits H2, H4, H5. 8mm locating bits PZ1, PZ2, PZ3, PZ4. 8mm locating bits PH1, PH2, PH3, PH4. 8mm locating bits T20, T27, T30, T35, T40, T45. 8mm locating bits SL 4, SL5.5, SL6, SL6.5. 8mm allen bits Allen 7, 8, 10. 1/2" recording bits M18 Spline (POWER) 1/2" plug-in bits H14, H17, H19, H22, H24. 1/2" locating bits M16 Spline. 1/2" arbor M16 Spline 100 mm long. 1/2" locating drill T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" locating drill R9 - 100 mm long. 1/2" Pick-up Bits R10 - 140mm long. 1/2" drill T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" drill H10, H11, H13 - 140 mm long. 1/2" drill M10, M12, M14 - 140 mm long. 1/2" locating drill H5 - 160 mm long. 1/2" pickup bits H7 - 230mm long. 1/2" locating drill R7, R8 - 230 mm long. 1/2" locating drill H7 - 230mm long. 1/2" locating drill T30 - 300 mm long. 1/2" adapter to 10 mm square. - DRAWER 4 screwdriver flat. 2.5x50, 3x75, 5x100, 6x100. screwdriver cross. PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact Screwdriver Plat. 5x75, 6x100, 8x150, 6x38 Stubby. Cross Impact Screwdriver. 5x75, 6x100, 8x150, 6x38 Stubby. - Drawer 5 T-handle Allen with ball head. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. T-handle Allen. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Curved pliers 150 mm. Side cutters 150 mm. Inner curved sealing pliers 170 mm. External curved sealing pliers 170 mm. External sealing pliers 180 mm. Sealing pliers 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm, Claw hammer with fiberglass handle. - DRAWER 7 Socket wrench 6mm. Socket wrench 7mm. Socket wrench 8mm. Socket wrench 10mm. Socket wrench 11mm. Socket wrench 12mm. Socket wrench 13mm. Socket wrench 14mm. Socket wrench 15mm.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Ncodpfxovn U Efe Afaor Forage protection Set of wheels. Appropriate tools. Base cabinet is optional!!

Condition: new, width of the strips 100 mm band length 1220 mm band speed 1140 m/min. 0,62 x 0,4 x 0,35 cm total power requirement 1,5 kW weight of the machine ca. 0,04 t dimensions 0,97 x 0,67 x 0,37 m This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Njdpoupxm Esfx Afajcr Connection voltage 230 volts.

Condition: new, bore capacity in steel (diameter) 25 mm throat 175 mm bore stroke 50 mm 16 mm spindle taper MK 3 spindle turning speed range 50 - 3000 U/min 380 mm 175 mm table surface area 700 x 180 mm connected load frequency 230 V max. distance between table and spindle-nose max. 320 mm total power requirement 0,75 kW weight of the machine ca. 150 Kg dimensions of the machine ca. 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Nodpeupxtfsfx Afascr spindle protection. incl. tool box with various tools

Condition: new, bore capacity in steel (diameter) 30 mm throat 200 mm bore stroke 70 mm 16 mm spindle taper MK3 spindle turning speed range 50 - 3000 U/min 565 mm 220 mm table surface area 840 x 210 mm connected load frequency 400 V max. distance between table and spindle-nose max. 470 mm total power requirement 1,1 kW weight of the machine ca. 230 Kg dimensions of the machine ca. 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Ncsdpfx Asupxt Eefajr Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand otional ( 199 Euro) incl. tool box with various tools

Condition: new, engine 78,5 2-takt power fuel Benzin tank capacity 1,6 Liter output 2,8 HP weight - pallet system 40 kg dimensions 660 x 400 x 400 m vibrating plate Hyundai engine Njdpfx Afoupxx Ueajcr Capacity 8200 N. Plate size 490 x 320 mm Forward speed 25 m/min Compaction depth 12 - 16 cm

Condition: used, -KOM 3099- CNC lathe VDI 40 tool holder set A set of VDI 40 tool holders consisting of 10 pieces is offered here. Contents: - 1x VDI 40 holder + internal turning tool from 50 mm diameter - 1x VDI 40 holder + internal turning tool from 23 mm diameter - 1x VDI 40 holder + internal turning tool from 16 mm diameter - 1x VDI 40 holder + drill 38 mm diameter - 1x VDI 40 holder + back turning tool from 47 mm diameter - 1x VDI 40 holder + axial parting-off tool - 3x VDI 40 holder - 1x VDI 40 plug Ncsdpfxswuq A Es Afaer Weight: 30kg

Condition: excellent (used), Year of construction: 2001, For sale are operational and very well-maintained dual-fuel oil/gas burners of the brand Weishaupt RGL40/1-B (2550 kW), including gas valve Dungs DN 65, year of manufacture 2001, with control cabinet. Ncsdpfx Aswgk Rasfajr

Condition: new, table length 1600 mm table width 800 mm stroke height 900 mm 310 mm weight max. in kg 500 kg Nodpeupxgfsfx Afajcr weight of the machine ca. 0,16 t 1,7 x 0,82 x 0,33 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Nodpfx Asu Imigofajcr