Used Gea Preduster for sale (2,122)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Djdjz Et E Eopfx Al Aoku Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, gear diameter: 250 mm, spindle speed (max.): 71 rpm, spindle speed (min.): 35 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,800 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: rotational speed infinitely variable, Economical production of straight-toothed bevel gears – both in single units and in series: The SW KF 250 is based on the proven cast iron bed of the Chemnitzer Modul ZFTK 250 and is completely rebuilt by Serwema Retrofit Solutions, with Siemens Sinumerik ONE, digital Sinamics S120 drives, and an electronic worm gear between the workpiece and weighing drive. The machine mills using the convoid process, a universal and highly economical process for straight-toothed bevel gears, as well as producing herringbone gears and spur couplings. Application areas: agricultural machinery, gearbox construction, drive technology, railways and mining – anywhere where straight-toothed bevel gears up to 250 mm are required and new machines are hardly offered. Delivery time is five to six months from order, with acceptance testing in Chemnitz together with you. Dkedpfxez E H Dbj Al Aju The SerWeMa gear cutting software guides the operator through workpiece and tool data using masks, without the need for programming. Integrated technology cycles: plunging, rolling, plunging and rolling, and plunging with double rollers. Engagement angles from 14 to 28° can be freely selected, and the number of teeth can range from 6 to 100. The stiff, ribbed cast iron bed provides the static and dynamic rigidity for bevel gears up to module 7 with a tooth width of 40 mm; the hydraulic and coolant unit is integrated into the bed, with components from Rexroth, Parker and Hydac, and pulse lubrication from Bielomatik. All worm gears are newly manufactured in bronze. Technical data: max. bevel gear diameter 250 mm, max. module 7, number of teeth 6–100, max. tooth width 40 mm, engagement angle 14–28°, distance between workpiece spindle and bevel tip 40–280 mm, workpiece spindle mount 80 mm metric, cutter head diameter 355 mm with 22 cutters per side, cutter head speed 35–71 rpm, connection value 30 kVA. Installation dimensions approx. 2.5 × 2.1 × 1.9 m, weight approx. 6 t. Scope of supply: complete electrical equipment with Siemens Sinumerik ONE and Sinamics S120, climate-controlled control cabinet manufactured in-house, dialog software, all worm gears in bronze, magnetic chip conveyor, circulation and pulse lubrication, hydraulic unit, coolant system, new paint RAL 5015/7035, geometric acceptance test according to SerWeMa protocol based on DIN standards, documentation (operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagram), CE marking. Optional: installation, commissioning and operator training at your site.

Condition: used, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Djdpfx Aszlivpel Asku Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: good (used), Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Handover in its current condition as inspected -Gearbox base: Damage, see photos -Manufacturer: Nord, Type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D -Speed: 40 rpm i= 34.09 -Power: 0.75 kW / 1375 rpm -Engine: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Design: B3 -Shaft: Ø 25 x 60 mm -Brake: 10 Nm -Protection class: IP 55 Dedpoilq Hiofx Al Asku -Dimensions: 480/185/H305 mm -Weight: 28 kg

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Engine power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable Dodpfx Aoc Nlynjl Aoku -Shaft diameter: Ø 14 mm -Design: B5 -Number: 1 motors available -Price: per piece -Dimensions: 410/187/H200 mm -Weight: 20 kg

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: C28046-0000, Sheet Metal Tab Placement and Bonding Machine Djdpfxoyw Ht Es Al Aeku In the sheet metal tab placement machine, metal tabs are automatically positioned onto the XPS/EPS core (sandwich panels) based on a laying pattern. The metal tabs are fixed in place using adhesive dots and flush-mounted. For functional details, see the product video. Current XPS/EPS panel sizes suitable for metal tab placement: min. 1,500 x 1,500 mm max. 8,000 x 2,500 mm

Condition: new, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, loading space length: 73,000 mm, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (Tel. No. ...). S-Way AD190S40/P 4x2 box body with tail lift. Djdpjyfvyisfx Al Aeku EURO VI E emission standard, speed limiter set to 90 km/h, cab rear wall without window, plastic bumper, cab fittings in black, AD MY LOW ROOF CAB, standard cab roof insulation, flat white roof, electronic immobilizer and second vehicle key, rear wall storage compartment with two sections, dashboard design: plastic with black inlays, 10-inch instrument cluster, digital tachograph 4.1, air suspension on rear axle, generator 2160W (24V x 90A), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, moderate climate execution, standard specification, air compressor 1-cylinder 352cc, chassis frame in grey, standard complete tractor-trailer brake, steel air tanks (number depends on suspension and trailer version), front axle stabilizer, exhaust pipe to the left, batteries 180 Ah (Heavy) / 170 Ah (Eurocargo, recommended for tail lift and/or PTO use), standard chassis component positioning, standard ride height, rear frame overhang: 2208mm, fuel tank 290L aluminum, AdBlue tank 50L, ECO NORMAL MODE, standard gearbox mode, 4G Connectivity Box incl. TCO service contract, RADIO with Bluetooth, DAB+, 7-inch display, tire pressure monitoring system (TPMS) with internal sensors, 4 DIN slots storage above, gearbox software ECO-Roll (coasting function), standard engine configuration Cursor 9, adaptive cruise control (ACC), lane departure warning system (LDWS), driver drowsiness attention warning, hill start assist (Hill Holder) for improved start-up on inclines, electronic stability program (ESP), reverse monitoring system with camera, blind spot monitoring system (BSIS) on the right, intelligent speed assistant (ISA), NO HIGH WAY ASSIST, moving off information system (MOIS), advanced emergency braking system (AEBS), pneumatic parking brake, wiring for breathalyzer immobilizer (ALC), CAMBIO 12TX 1850 TD, tires: 315/70R22.5, mechanical roof hatch, first aid kit, fog lights with cornering/turning function, air suspension for driver cab, exterior mirrors electrically adjustable and heated, LED headlights at the front, black decorative foil on doors, transparent sun visor mounted externally above cab, leather steering wheel, sun blind for driver's side window, pneumatic horn behind bumper, fully automatic air conditioning, HI-Comfort driver's seat: multi-adjustable, air-suspended, integrated headrest and height-adjustable seatbelt, lumbar support, 3-step heating/cooling, luxury co-driver seat: 4-way adjustable, air-suspended, integrated headrest and seatbelt, heated, lumbar support, reinforced parabolic spring on front axle, electrical pre-installation for tail lift according to VEHH standard, front axle weight variant: 8,000 kg / rear axle: 11,500 kg (technically possible: 13,000 kg), heavy-duty anti-roll bar rear axle D 60mm, two wheel chocks, cab-mounted battery master switch, battery charging socket, terminal clamps, rear axle ratio: i = 3.08, 24V trailer socket, 15-pin, ...

Condition: good (used), Counting scale, scale, digital scale, market scale, shop scale, price calculating scale -Manufacturer: EXA, Market scale, Retail scale Dodpfow S T D Esx Al Asku -Type: E 10 -Weighing range: max. 10 kg -Display: Price / kg / Tare, double-sided display -Dimensions: 320/310/H120 mm -Weight: 3 kg

Condition: used, functionality: fully functional, machine/vehicle number: FN 55xxxx, Year of construction: 2017, operating hours: 5,789 h, load capacity: 4,500 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,640 mm, power: 55 kW (74.78 HP), fork length: 1,150 mm, empty load weight: 6,358 kg, total length: 3,070 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Chassis number: FN 55xxxx Load centre of gravity: 500 Dkjdpfx Alsvwhguo Aeu ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Gearbox: Hydrostatic manual switch Condition: Reconditioned without guarantee Technical condition: very good Front tyres type: Superelastic Front tyres size: SE 300-15 Rear tyres type: Superelastic Rear tyres size: SE 28x9-15 Description: technically and visually refurbished, UVV approved and serviced, without warranty/liability for material defects Side shift, attached (4100 kg load capacity at 500 mm LSP) 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, Solo pilot, interior mirror, additional air filter, quick couplings for 4th function, Load capacity 4100 kg with side shift, device has been refurbished by the manufacturer

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Djdjqzmnuspfx Al Aoku Further technical data on request or see photos

Condition: new, Year of construction: 2016, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !! Dksdpfsgwlrdex Al Aou

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Dkjdpewzypnofx Al Asu Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized gear hobbing heads for external and internal gear cutting are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm Dedjzv Ulqopfx Al Aeku table diameter 400 mm boring diameter 125 mm spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation

Condition: used, functionality: unexamined, Ferwood Code: RU0009426 - Manufacturer Code: - Condition: Used - Functionality: Not tested - If interested we offer a revision service, contact us. Djdpfx Alev Hzvuo Aeku

Condition: used, functionality: unexamined, Ferwood code: RU0010348 - Manufacturer code: JS-EV040 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service; please contact us. 10KG - 46X39X27 Dsdpfxoycfhqj Al Ajku

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003587 - Manufacturer Code: 242234 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer refurbishing service, please contact us. 2KG - 20X20X20 Dksdpfx Asyrpavol Aou

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Dsdpfxjvvudke Al Ajku Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W PRAWEMA 2006 SYNCHROFINE 205 HS Dedpfovm Efasx Al Aoku

Condition: used, Year of construction: 1983, max. wheel diameter 80 / 124 mm gear width 150 mm max. module 2 min. module 0,3 turning speeds 210 - 1680 U/min min. number of teeth 6 Djdpfx Aez Dk Afsl Aoku total power requirement 2,2 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 1,5 x 1,8 m Top condition.

Condition: used, Star gear P.I.V 2.7kw Manufacturer: P.I.V Dodsudyu Eepfx Al Aeku Type: LN4 K Power: 2.7kw Revolution: 50/min

Condition: used, Sheet lifter - Sheet clamp - Universal lifter Carrying clamp, beam clamp, lifting tackle for horizontal sheet transport Dkedsxciwzjpfx Al Aou Lifting gear for horizontal sheet transport DOLEZYCH type Dolast K15 Year of manufacture: 1997 Load capacity per clamp: 3 t Maximum load capacity: 6 t (for the twin lifting tackle) Clamping range: 0–51 mm Sheet thickness: 4–50 mm Wire rope length: 1.5 metres - Two-leg wire rope sling with eye - 2 lifting clamps included Own weight approx. 45 kg The lifting gear is suitable for lifting single steel plates or bundled sheet packs. Price quoted per lifting gear, 2 units available.

Condition: excellent (used), mileage: 534,500 km, power: 301 kW (409.25 HP), first registration: 11/2001, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 200 l, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 7,100 kg, permissible axle load (axle 3): 13,000 kg, loading space length: 5,300 mm, loading space width: 2,500 mm, loading space height: 1,400 mm, Year of construction: 2001, Equipment: ABS, air conditioning, differential lock, power mirror, retarder, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Leaf spring suspension - Driver comfort seats - Differential lock - Speed limiter - Hub reduction - Radio/CD player - Sun visor - Power take-off (PTO) - Power take-off (PTO) Dodjy D Acpjpfx Al Aoku - ZF intarder - ZF16 manual gearbox - Towing hitch = Remarks = GOOD CONDITION HEAVY DUTY M.A.N. FE410A (F2000) 8x4 FULL STEEL TIPPER WITH HUB REDUCTION AXLES, ZF16 MANUAL GEARBOX, ZF-INTARDER & AIR CONDITIONING!! 410HP, EURO 3, 6-CYLINDER ENGINE!! 16-SPEED MANUAL GEARBOX!! ZF-INTARDER!! FULL STEEL SUSPENSION!! AXLE HUB REDUCTION!! P.T.O.!! HYDRAULIC KIT!! AIR CONDITIONING!! ETC.!! 3-WAY FULL STEEL TIPPER BODY!! DIMENSIONS; LENGTH x WIDTH x HEIGHT approx.: 5.30 m x 2.45 m x 1.40 m (approx. 18 m3)!! TRUCK IS IN GOOD WORKING CONDITION, READY FOR HEAVY TIPPER JOBS!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 6x6 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPPING, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,967 cc Transmission Transmission: ZF16 manual gearbox + ZF-intarder, 16 gears, manual Axle Configuration Tire size: 315/80R22.5 Suspension: Leaf springs Front axle 1: Max. axle load: 7,100 kg; Steered; Tire tread left: 40%; Tire tread right: 40%; Brakes: Disc brakes Front axle 2: Max. axle load: 7,100 kg; Steered; Tire tread left: 60%; Tire tread right: 60%; Brakes: Disc brakes Rear axle 1: Twin wheels; Differential lock; Max. axle load: 13,000 kg; Tire tread, left inside: 60%; left outside: 60%; right inside: 60%; right outside: 60%; Axle reduction: planetary axles; Brakes: Drum brakes Rear axle 2: Twin wheels; Differential lock; Max. axle load: 13,000 kg; Tire tread, left inside: 20%; left outside: 20%; right inside: 20%; right outside: 20%; Axle reduction: planetary axles; Brakes: Drum brakes Weights Unladen weight: 13,050 kg Payload: 22,950 kg Gross vehicle weight: 36,000 kg Functionality Body manufacturer: SCHWARZMULLER 3-way tipper Loading floor height: 140 cm Tipper: Rear Condition Technical condition: very good Visual condition: very good Further information Contact the Sales Department for more information.

Condition: excellent (used), mileage: 600,500 km, power: 309 kW (420.12 HP), first registration: 04/1994, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 700 l, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1994, Equipment: ABS, differential lock, parking heater, retarder, = Additional Options and Equipment = - 2 berths - Aluminum fuel tank - Heated mirrors - Central lubrication system - Driver comfort seat - Differential lock - Differential lock (listed twice, possibly front and rear) - Speed limiter - Intarder - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater (stand heating) - ZF intarder - ZF16 manual gearbox = Comments = GOOD CONDITION M.A.N. 19.422FLT XT (F2000) 4x2 TRACTOR UNIT WITH ZF16 MANUAL GEARBOX, ZF INTARDER & SUN VISOR!! 420HP, EURO 2, (6-CYLINDER ENGINE)!! ZF16-SPEED MANUAL GEARBOX!! ZF INTARDER!! SUN VISOR!! 700 LITER DIESEL TANK!! ETC.!! TRUCK IS IN GOOD OPERATING CONDITION AND READY FOR WORK!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPPING, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! Dedpfoynmgrjx Al Ajku YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 11,967 cc Transmission Transmission: ZF16 manual gearbox + ZF intarder, 16 gears, manual Axle configuration Tire size: 315/80R22.5 Brakes: Drum brakes Front axle: Max axle load: 7,500 kg; Steering axle; Tire tread left: 40%; Tire tread right: 40%; Suspension: leaf spring Rear axle: Twin tires; Differential lock; Max axle load: 11,500 kg; Tire tread left inner: 20%; Tire tread left outer: 20%; Tire tread right inner: 20%; Tire tread right outer: 20%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,500 kg Payload: 11,500 kg Gross vehicle weight: 19,000 kg Functional Cargo area capacity: 700 l Loading height: 118 cm Condition Technical condition: very good Visual condition: very good Further information Please contact Sales Department or Erik Engel for more information.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, overall weight: 12,000 kg, ECHNICAL DESCRIPTION: Max. Module 5/6 Dksdsz Drbpopfx Al Aou Max Diam. Ext. Nominal 300mm Maximum axial hob slide travel(Z) 360mm Maximum hob head swivel angle ± 35 deg Max. Hob Length 180mm Max. Hob Diam 150mm Max. Hob Shift 200mm Max. Hob speed 1000rpm Max. table rotation 500rpm EQUIPMENT: - Sinumerik One - Dialog Program - Table with Direct Drive – Chip conveyor – Lubrication and hydraulic unit – Full coverage of the workspace – Documentation

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Dkjdporualpjfx Al Asu Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg