Used Ferromatik K 110 1100-493/Arburg 270 M 500-90 for sale (95,494)

Condition: excellent (used), For sale is an ABUS wall-mounted jib crane equipped with an HADEF electric chain hoist, Type 63/78EF. This set is designed for lifting and moving loads in workshops, warehouses, production halls, and assembly stations. The robust steel construction from ABUS ensures high strength and stability during operation. The crane is equipped with an HADEF electric chain hoist controlled by a pendant control. The design is suitable for mounting on a wall or steel column. Technical data: Crane manufacturer: ABUS Kransysteme GmbH Hoist manufacturer: HADEF Hoist type: 63/78EF Crane lifting capacity: 500 kg Hoist lifting capacity: 250 kg Total jib length: 204 cm Hoist year of manufacture: 1987 Crane year of manufacture: 2002 Power supply: 220/380 V Frequency: 50 Hz Motor power: 0.3 kW Lifting speed: 5.0 m/min Protection class: IP44 Chain: 5 × 15 mm (DIN 5684-8) Ndsdpfx Aoziqnhsf Seb Pendant control CE marking Condition: Used. Functional. Shows normal signs of use in the form of scratches, paint chips, and dirt, as visible in the photos. Visual condition consistent with age and use.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Ndjdpfx Afezub Hrj Sjb Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS Ndsdpfx Aez A Dxkjf Sjb • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Ndedpfezy I Nkox Af Sjb Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Nsdpfx Afezy I Sxj Sjdb Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2009, Arburg 370 S 600-290 (2009) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Nsdpezrvy Ujfx Af Sodb Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Nodszy I Rnspfx Af Sjdb Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2006, operating hours: 5,000 h, functionality: unexamined, machine/vehicle number: 61007689, overall weight: 5,400 kg, input frequency: 50 Hz, input voltage: 400 V, This KRAUSS MAFFEI KM-100-380CX injection molding machine, manufactured in 2006 with approximately 4,700 operating hours (as of 03/2025), will be auctioned off in our online auction "Liquidation of a well-known toy manufacturer – injection molding machines, warehouse equipment, logistics accessories – STEP 3". Njdpfsz Erz Ssx Af Sodb You can find this and many other items from the fields of injection molding & plastics technology, warehouse & conveyor technology, and workshop equipment on our RESTLOS auction platform. Machine details: including all peripherals installed on the machine Year of manufacture: 2006 International size: 380 CX/100 Own weight: 5,400 kg Reported operating hours as of March 10, 2025: 4,704. The machine has already been disconnected from the power supply and can no longer be switched on; all fluids are still in the machine, as stated. as pictured basically without any other items basically, functionality is untested.

Condition: used, machine/vehicle number: 001490U, For Sale Used single-girder overhead crane ± 8.900mm x 500 kg Nodew I Rrxjpfx Af Ssdb

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version Nodpfoztxt Hsx Af Sedb - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: used, Year of construction: 1991, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 3,400 kg, height adjustment type: electric, OTT Omega 1100 (year of manufacture 1991) Dimensions and weight: Footprint / installation dimensions (L x W x H): approx. 2700 x 2100 x 2200 mm Ndedpfxjz Dpxlj Af Seb Weight: approx. 3400 kg Extraction: 3 extraction ports

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Ndedezp R Izepfx Af Sjb

Year of construction: 2015, condition: ready for operation (used), number of axes: 4, This 4-axis Arburg Multilift Select 15kg quer was manufactured in 2015. It features an impressive X-axis travel of 700 mm, Y-axis travel of 1200 mm, and Z-axis travel of 2000 mm. If you are looking to get high-quality work piece handling capabilities, consider the Arburg Multilift Select 15kg quer machine we have for sale. Contact us for further details. Ndjdpfx Afey T Ir Uj Sob • X travel: 700 mm • Y travel: 1200 mm • Z travel: 2000 mm • C-axis: 0/90 degrees

Condition: good (used), Year of construction: 2008, Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Njdpfx Afoz A A Hao Sjdb Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Shot volume: 49 cm3 Shot weight: 45 g Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language Type: Horizontal Drive: Hydraulic Machine hours: 53000

Condition: good (used), Year of construction: 2013, operating hours: 71,000 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503728 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2013 operation hours: 71000 h technical data clamping unit clamping force: 1000 kN Ndsdpfxjz Eaume Af Seb distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm opening stroke: 350 mm ejector stroke: 175 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 760 kg technical data injection unit screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 150 mm screw torque: 380 N plasticising rate: 20 g/s PS injection rate into the open: 113 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. Handling Anti vibration mounts mould heating 6x technical data robot-system handling type: Linear manufacture: ARBURG controller: Multilift 6 kg year of construction: 2013

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Nsdpjt D R R Sofx Af Sjdb Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2005, operating hours: 63,000 h, functionality: fully functional, clamping force: 400 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 400-60 The machine is fully functional and ready for immediate use Technical data Year of construction: 2005 Operating hours: 63,000 h Cylinder: Ø 25 Clamping force: 400 kN Core pull: 1*Hydraulic Internal pressure transducer On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Ndodpfsu Hqh Rox Af Seb Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2005, clamping force: 400 kN, This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details. Ndodpfszh Ey Aex Af Ssb - Model: ALLROUNDER 270 C 400 - 100- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor Rated Current: 59 A- Heating Rated Current: 31 A- Total Rated Current: 90 A- Total Connected Load: 54 kW- Control System: Selogica Control Panel- Additional Equipment: Integrated part discharge conveyor belt- Space Requirement / Footprint: 3.2 qm- Total Power Requirement: 15 kW- Lubricating Oil Type: Hyspin SP32 (Hazard class A2)- Oil Capacity: 160 l- Standards Compliance: CE Marked- Equipment: Integrated conveyor belt, control panel terminal- Optional: A cooling system and a second machine are available for an additional charge.- Until now, both machines have been running on the same cooling system.

Condition: ready for operation (used), Year of construction: 2018, overall weight: 140 kg, This KUKA KR 90 R3700 prime K robot arm was manufactured in 2018. Ideal for automation tasks, it offers flexibility and precision for various industrial applications. Consider the opportunity to buy this KUKA KR 90 R3700 prime K robot arm. Contact us for more information. Additional equipment • E S13 055 CTR PNT EPS AIR • E S36 038 CTR PNT EPS AIR Machine Benefits Technical Machine Benefits • Supply voltage: 3x400v • Frequency: 50/60hz • Charge full-load current: 22a • Mains fuse: 25a • Robot 1: 98,57 hours / robot 2: 136,17 hours Extra Information Ndsdsyaiigjpfx Af Seb Second similar robot available.

Condition: excellent (used), Year of construction: 2006, ARBURG 370 S — 600-290 | Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Ndsdpozrwz Tofx Af Sjb Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, Year of construction: 2007, Wide-belt sanding machine Manufacturer: Kündig Type: Premium-2 1100-RE Year of manufacture: 2007 Technical data: Working width: 1100 mm Working height (max.): 200 mm Sanding roller Sanding shoe for finish sanding Belt cleaning Vacuum 400 V, 50 Hz, 24 VDC Ndjdpfjzuza Sox Af Sob 57.5 amps 28.4 kW Includes loading Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. Ndodpfx Afjwbknbe Sob ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 860 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, feed length X-axis: 630 mm, feed length Y-axis: 730 mm, feed length Z-axis: 860 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, nominal power (apparent): 70 kVA, torque: 1,400 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 640 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 290 kg, total height: 3,650 mm, total length: 5,650 mm, total width: 3,560 mm, table width: 400 mm, table length: 400 mm, table load: 290 kg, rotational speed (max.): 80 rpm, overall weight: 25,000 kg, distance between spindles: 720 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, For sale is a high-performance, two-spindle CNC machining center, MAG SPECHT 500 DUO LIMO PW, manufactured in 2017, with a pallet changer, two working spindles, and 5-axis machining capabilities. The machine has been used infrequently recently and is currently not in active production. It remains connected to the power grid, so an inspection while powered on is possible by appointment. Manufacturer: MAG / FFG Model: MAG SPECHT 500 DUO LIMO PW Year of manufacture: 2017 Condition: very good (original images dated September 15, 2026) Operating hours: 17,690 h Category ID: 1458 Type ID: 4166 Machine type: Universal machining center Technical data: Year of manufacture: 2017 Machine number: X.0112.6258 Control system: Siemens 840D SL Number of spindles: 2 Machining: 5-axis Design: LIMO PW Pallet changer Tool holder: HSK-A63 Travel in X: 630 mm Travel in Y: 730 mm Travel in Z: 860 mm Axis speed X/Y/Z: up to 120 m/min Spindle distance: 720 mm B-/A-axis: up to 80 rpm B-axis division: 360° x 0.001° Pallet size: 400 x 400 mm Table/pallet load: 2 x 290 kg Max. weight moment at 90°: 1,400 Nm Max. workpiece and fixture height with pallet changer: 640 mm Max. clearance circle workpiece/fixture: 2 x 700 mm Tool magazine: 112 tool positions for HSK-A63 Tool diameter with full load: 75 mm Tool diameter with empty spaces: 230 mm Max. tool length: 550 mm Max. tool weight: 12 kg Total weight of tools in the magazine: max. 420 kg Accuracy / Measuring system: Nodpfez Ar E Iox Af Sedb Linear measuring system X/Y/Z: 0.0001 mm Positional accuracy: 0.005 mm Positional repeatability: 0.004 mm Machine dimensions: Width: approx. 3,560 mm Length: approx. 5,650 mm Height: approx. 3,650 mm Machine weight: approx. 22,000–25,000 kg Electrical rated power according to nameplate: 70 kVA Operating voltage: 400 V / 50 Hz If you have any questions or need more information, please send us a message or call us. Inspection while powered on is possible by appointment in 36199 Rotenburg an der Fulda. Technical documentation is available. Sale from the current location. Dismantling, loading, and transport can be arranged. Subject to prior sale, errors, and changes in technical specifications.

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Ndsdpfx Aez D Utbof Ssb Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), functionality: fully functional, punching force: 110 t, Geka punching machine model Puma 110/E-500, punching power 110tm, hole capacity diameter 40 x20, neckline 500mm, in good condition and very equipped. Ndedpjvdkprefx Af Ssb