Used Fendt 936 Vario (Belgian / Deutz Engine !! / 360 Hp /... for sale (26,232)

Condition: new, BENZ HSK TILTING AGGREGATE DRILLING HEAD MILLING CUTTER Hjdpfozq Dgajx Acnjt

Condition: new, power: 213 kW (289.60 HP), first registration: 07/2025, fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 300 l, color: red, gearing type: automatic, emission class: euro5, suspension: steel, total length: 7,990 mm, total width: 2,500 mm, total height: 3,640 mm, Year of construction: 2025, Equipment: AdBlue, air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Sun visor = Notes = Fuel tank: 300 liters AdBlue tank: 27 liters Air conditioning Equipped with a fire fighting engine: Crew cab for 5+1 seats 2+2+1 locker layout Tanks: water 5,000 liters + foam 500 liters Pump: JOHSTADT TO 3001 located at the rear. Fire Fighting Centrifugal Pump EN 1028 with normal (10/15 bar) and high-pressure pump (40 bar) on a single shaft made of stainless steel, mechanical seal, bearing without oil, central drainage. Water and foam monitor flow: 2400 l/min at 10 bar 1 inch 50 m high-pressure hose reel with 50 m rubber hose with 150 l/min nozzle – jet/spray nozzle Red light bar type PA system installed on top of the cabin, with a 100w speaker, microphone, and three-tone siren with speaker. Hsdpfx Acszrtqqsnet = Further Information = General Information Cab: double Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Transmission Gearbox: PowerMatic 08.13 OD, automatic Axle Configuration Tire size: 14.00R20 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steered Weights Unladen weight: 10,430 kg Payload: 7,070 kg GVW: 17,500 kg = Company Information = WE PROVIDE, YOU ACCELERATE. Without boundaries. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported by comprehensive after-sales services, such as supplying parts and providing (local) training.

Condition: used, Year of construction: 2007, operating hours: 70,859 h, machine/vehicle number: 15145361464, Travel ranges (X/Y/Z): 3,600/920/820 mm, with B-axis and integrated NC table, maximum spindle speed: 18,000 rpm, tool interface HSK-A63, 30-position tool changer, pendulum machining, control system SIEMENS Sinumerik 840 D Powerline, chip conveyor, emulsion separator, infrared measuring probe. The customer must ensure that drilling emulsion/lubricants are professionally extracted and disposed of. Hedpfszqy Umex Acnjt

Year of construction: 2014, condition: good (used), Approx. 10-20 scissor lift platforms, Kleu – used: Price per unit, ex works: €150.00 (net)! Manufacturer: Kleu Podest Type: Vario Standard Year of manufacture: unknown Dimensions: approx. 2m x 1m Load capacity: 750 kg/m2 Variable height adjustment Height: approx. 1m Hedpfx Aezq Abpecnjt Operation: Rotate the platform. Press the locking levers on the underside together. Adjust the scissors to the desired height. Release the locking levers. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: used, mileage: 202,000 km, power: 265 kW (360.30 HP), first registration: 10/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: yellow, gearing type: mechanical, loading space length: 4,900 mm, loading space width: 2,350 mm, loading space height: 900 mm, Year of construction: 2015, Equipment: ABS, crane, Iveco TRAKKER 360 / 6x4 Tipper 4,90 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 202 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEERING ? ENGINE BRAKE ? TACHOGRAPH ? AIRCONDITION TIPPER: 490 x 235 x 90 cm (L x W x H) CAPACITY: 11 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 380/138 cm TIRE SIZE: 13R22,5 SPRING SUSPENSION ON BOTH AXLE CRANE: HMF 1444 - Z 2 + REMOTE CONTROL Hodjzpc U Tepfx Acnet TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, 1 unit of cooling system INDUSTRIAL FRIGO GRWV 165/Z-BRG 450/HP industrial system combination consisting of a water-cooled chiller and an external dry cooler, self-dismantling Hsdpfx Aezqcg Ejcnot Color: as shown in the pictures, according to the images and inspection Condition: used

Condition: good (used), Year of construction: 2014, operating hours: 5,770 h, fuel type: diesel, Genie S-65 telescopic boom lift, 4x4, DEUTZ diesel engine, 5770 hours, 21.8m working height, 2014. Hsdpfozqhnbsx Acnjt A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2005, Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible. Hjdpfx Acswal Imonot

Year of construction: 2021, condition: ready for operation (used), A Vollmer CNC 5-axis tool grinding machine for the complete machining of solid carbide rotary tools is available. Tool holder: HSK50, tool positions: 8, max. workpiece length: 340mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 330mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control: Vollmer. Including automatic HP160 workpiece magazine. Documentation available. An on-site inspection is possible. Hodozg Ir Sopfx Acnet

Year of construction: 2016, condition: ready for operation (used), A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment. Hodpjzfp Hujfx Acnst

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Max. press width: 1250 mm Total pressing force: 80 t Hsdpjzkl Tbsfx Acnet Specific pressing force: 2.5 kg/cm² Press opening width: 400 mm Heating plate material: standard aluminum Operation: button control Swivel button: Yes Number of pressure pistons: 4 Safety edge strip: Yes Condition of heating plate: good Weight: 3800 kg Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Hjdpfxeufy S Hs Acnst Model Type 8 HP VC 1200-325 Volume 9980l Weight 2200kg

Condition: as good as new (ex-display), total pressing surface 2550 x 1350 mm total pressing force 900 KN (=80 MP) specific pressure force 2,6 daN/cm² (kp/cm²) 4 cylinder 80 mm diameter 400 mm stroke operating pressure 355 bar Hodpfo T R Nhsx Acnjt anodized heating platens, tooth rack guidance

Condition: new, Year of construction: 2026, CORMAK HK25 VARIO is a compact milling and drilling machine designed for versatile applications. Ideal for both hobby users and professionals, this machine combines compact dimensions with exceptional functionality. Equipped with an MT3 spindle taper, it provides excellent stability and machining precision. The digital spindle speed display allows precise control of the machining process, ensuring excellent results. Machine features Digital spindle speed display Drill chuck with arbor Digital drilling depth display Smooth spindle speed adjustment Precision-mounted spindle bearings Technical specifications Parameter Value Drilling capacity 20 mm End milling capacity 16 mm Face milling capacity 63 mm Spindle taper MT3 Spindle stroke 50 mm Number of spindle speeds Variable Spindle speed range 50–2250 rpm Working table surface 700 × 180 mm Maximum longitudinal table travel 480 mm Maximum cross table travel 175 mm Maximum vertical head travel 280 mm Number of T-slots 3 T-slot dimensions T12 / 12 mm Motor power 0.75 kW / 1 HP, 230 V Dimensions 980 × 600 × 1010 mm Weight 110 / 125 kg Optional equipment Rotary vices Tilting vices Precision vices Rotary tables Dividing heads Tapping heads Milling heads End mills (HSS, HSSE, HSS-PM, carbide) Cylindrical shank drills Taper shank drills Milling inserts Hand and machine taps Clamping element sets Tool holders (for collets, Weldon) Drive arbors Hsdpfxotz Sxls Acnjt Drill chucks

Condition: used, mileage: 127,733 km, power: 115 kW (156.36 HP), first registration: 01/2007, fuel type: diesel, empty load weight: 3,900 kg, maximum load weight: 3,590 kg, overall weight: 7,490 kg, tire size: 205/75R17.5, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: engine braking, color: white, driver cabin: other, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 6, loading space length: 3,100 mm, loading space width: 2,200 mm, loading space height: 350 mm, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel superstructure, Doka, rear window, electric mirror, electric window left, electric window right, auxiliary heating, switch 6, ABS (anti-lock braking system), power take-off, differential lock, fog lights, rotating beacon, leaf suspension, trailer coupling ball head, trailer coupling air+light, low-noise G1, lashing eyes, U-protection, aluminum side bumpers, pendulum flaps, green environmental badge Hsdpfxevhnkuj Acnst Wheelbase: 3700 mm Body: Meiller 3-sided tipper body 2.5 t front axle, rear axle H2 5.6 t crown wheel 312, ABS, differential lock rear axle, reinforced rear axle stabilizer, reinforced front axle stabilizer for extremely high loads, additional sound insulation, Auxiliary hot-air heating, air-operated engine brake, reinforced front parabolic springs level I, reinforced rear parabolic springs level II, floor insulation, right-hand hinged access door with sliding window, Meiller 5-piston pump type 254/1, MB 56-2c auxiliary drive. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0523813, Offer 22728 Technical data: - Welding current max 335 A 35% ED - max 260 A 60% ED - max 200 A 100% ED - Welding current is regulated in 36 fine stages from - 40 A - 335 A Hjdpfsrm Rpvsx Acnjt - 2 rollers wire feed - Roller wire feed infinitely variable - 2 cycle - 4 cycle regulation - Spot welding + interval welding - Air-cooled hosepack 4 running meters - Ground cable - pressure reducer - 400 V connection - Space requirement approx. W 550 x H 1000 x D 1000 mm - Weight approx. 150 kg

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4EG0 AC variable speed drive, serial number: EL081662505015 + ROD 426 360 27S12-03, used, significant signs of wear, 100% functional, scope of delivery as shown in the photos. Hedpfx Aji D Slijcnet

Condition: used, power: 170 kW (231.14 HP), Year of construction: 2017, operating hours: 7,229 h, Equipment: air conditioning, LIEBHERR R936 NLC, year 2017, 7229 operating hours, weight 33,200 kg, 170 kW, equipped with a hammer attachment, and featuring locking valves. Hsdpfx Asi Uy Afscnet

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 942.991-C-1058233, power: 450 kW (611.83 HP), fuel type: diesel, The engine has never been used. The unit adheres to Euro 4-5 emission standards. Hjdpswhkrmofx Acnjt Discounts may be applied in case of multiple unit purchases. Please contact for your other Mercedes-Benz engine for heavy vehicle and crane inquiries with varying powers and emission standards.

Condition: used, Year of construction: 2001, functionality: fully functional, Sabi PSR 360/600 bandsaw, semi-automatic Sabi bandsaw, all carbide (WIDIA) blade guides and seals and scrapers of the saw's lift/lower cylinder have been replaced. Cutting capacities: max diameter 320mm, rectangle 600 x 300mm, at 45º: 375 x 300mm. Cutting speed 15 to 105 m/min, main motor 2.2kW, total power 2.5kW, estimated weight 1900kg. Machine with rotation function, in very good condition. Hjdpfx Asxf Tvmecnot

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Hydraulic - twin-column guided miter - metal band saw Technical Data: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping - Pre-selection of the stroke height of the saw band Hsdpfx Aowqpmnecnjt - Micro-spray coolant system - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: Hsdowu Suvspfx Acnot - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 2,200 kg, This advertisement serves solely for informational purposes and does not constitute a legally binding offer. The H180 model is the ideal equipment for agriculture, the construction industry, the electrical, plumbing, repair, and similar sectors. We also guarantee equipment service even after the warranty period has expired. Wheel loaders are manufactured based on and under the supervision of European technicians. The equipment consists of a robust structure and can operate under all conditions. DIMENSIONS AND WEIGHT: Length (without attachments): 3.5 m Length (with standard bucket): 4.25 m Overall width: 1.1 m Overall height: max. 2.4 m / min. 1.7 m Empty weight (without bucket): 2200 kg Wheelbase: 1.86 m Axle distance: 1.55 m Tires: 10.0/75 – 15.3 OPERATING PARAMETERS: Hsdpfx Aoyk Edzocnot Lifting height (lower edge of the standard bucket): 2.8 m Maximum lifting height (top edge of the attachment): 3.2 m Maximum lifting height (top edge of the bucket): 3.5 m Dumping height (45°): 2.4 m Maximum lifting capacity (at the attachment): 800 kg WORKING EQUIPMENT AND HYDRAULIC SYSTEM: Bucket width: 1.05 m Bucket volume: 200 liters Bucket weight: 130 kg DRIVE AND TECHNICAL EQUIPMENT: Engine: KUBOTA – DIESEL Engine model: D1105 Engine power: 18.2 kW – 25 hp Battery voltage: 12 V Gears: 1 Drive: hydrostatic Brakes: disc brake Parking brake: drum brake ADDITIONAL EQUIPMENT: Bucket and forks Road lighting Trailer hitch Additional hydraulic circuit Joystick control 4x4 drive Quick coupler PWG pump Italy PRICE: €14,500 net €17,255 gross

Condition: excellent (used), Year of construction: 2011, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: light blue, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 3 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 3 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours Hodpfx Acex R Szujnot - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Joshua Alexander Iron Flag Global Limited

Condition: new, power: 265 kW (360.30 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, onboard computer, power assisted steering, seat heater, Vehicle location: Bovenden, first registration as house, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), constant throttle, PTO, automatic transmission, differential lock, leaf suspension, air and light connections for trailer hitch, aluminium tank, green environmental sticker. Wheelbase: 3800 mm, 9t front axle! Frame length approx. 6200 mm! Frame height approx. 1170 mm! Hedpfx Ajxrp Avecnjt VIN: ZCFF62PP60C526745 Day registration on 08.12.2025! Accessory specifications subject to change without notice. Interim sale and errors excepted!