Used Eder + Mueller Fitting Centre for sale (6,803)

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 35 The Minipack Replay 35 EVO is a manual hood shrink wrap machine designed for small production volumes where space is limited. Manual tabletop shrink wrapping machine Power supply: 230 V, single-phase (optionally 120 V) Installed power: 2.0 kW (230 V) / 2.25 kW (120 V) Maximum current: 8.6 A (230 V) / 19 A (120 V) Fsdpfx Aljx Tr Igjqjgb Sealing bar usable dimensions: 380 × 250 mm Maximum product dimensions: 350 × 240 × 140 mm Maximum film roll dimensions: Ø 200 × 350 mm Machine dimensions (closed): 935 × 620 × 540 mm Machine dimensions (open): 935 × 620 × 540 mm Machine weight (net/gross): 49 / 63 kg

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: DA 1580 A 1680 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34 Fgjdpfx Aley H Dzfoqeb

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 31i-B, _____ Description: Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mm Turning length : 678 mm In General: Year of manufacture:2015 Control system:Fanuc i 31-B Turning diameter:175 mm Max. turning length:678 mm Spindle: Technology:Motorised spindle Speed:4,500 rpm Power:11 kW Bar capacity:65 mm C-axis:0.001° Clamping cylinder:Hollow clamping cylinder Chuck:Collet chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Power:7.5 kW Bar capacity:51 mm Fgjdpfey Hnt Esx Alqsb C-axis:0.001° Clamping cylinder:Semi-hollow clamping cylinder Chuck:Collet chuck Tool carrier I (X/Y/Z/B): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:330 mm Y-axis:80 mm (+/- 40 mm) Z-axis:1,040 mm B-axis:182° (+/- 91°) Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:127 mm Y-axis:65 mm (+/- 32.5 mm) Z-axis:678 mm Equipment: Chip removal:Chip conveyor Coolant supply:2x high-pressure coolant pumps Bar feeder:IEMCA Master 80 HF - 4 meter Finished part removal:Part gripper + conveyor belt Set-up operation:Electronic handwheel

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpm Movement X/Y/Z : 600/630/510 mm Tool holder : HSK 63 In General: Year of manufacture:2020 Control system:Siemens 840 Dsl Travel range X/Y/Z:600/630/510 Spindle centre distance:600 mm Rapid traverse X/Y/Z:120 m/min Spindles (2 pieces): Technology:Motorised spindles Speed:17,500 rpm Power:35 Nm Torque:80 Nm Tool holder:HSK 63 Swivel mount: Technology:A-axis or U-axis with counter bearing Drive:Direct drive (torque motors) Clamping bridge: Technology:Clamping bridges, each with 2 NC rotary tables Drive:Direct drive (torque motors) Table diameter:Ø 340 mm Max. table load:2 x 90 kg Max. fixture dimensions:2x Ø 600 x 400 mm Tool magazin: Technology:Chain magazine Tool changer:Pick-up Number of stations:2 x 72 Max. tool diameter:80 mm Max. tool length:425 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Drive systems:Direct on all axes (linear motors) Hydraulic clamping:2x 3-circuit Chip removal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Separate cooling unit Fgedpfx Alsy Hntxsqsb Support control:Pneumatic Tool breakage detection:Inductive Automation preparation:Profinet interface, automatic doors, automatic rinsing cycle

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Fgsdpev I T Ewjfx Alqeb Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. Fedpfx Ajyaywhslqogb QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm, Tailstock, 10” Chuck, Swarf Conveyor, Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm Fjdjw Rrzaopfx Alqegb General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Ex works - £54,950.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Fedex D Uf Tepfx Alqogb Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Fgsdpsyvqdfofx Alqsb Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control CNC SCM CNC Machining Center ACCORD 40 FX for windows and doors Fsdoy Hl Iyjpfx Alqogb ----- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Fedpfx Aewuclxelqegb Total number of drilling spindles: 11

Condition: used, machine/vehicle number: 008255, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Fedpfx Alex A Td Eeqjgb Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1250 mm Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 750 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 850 mm RAPID FEEDS X-Y-Z: 15 m/min SPINDLE: 4000 rpm; 26 kW; ISO 50 - DIN PALLET: N.2 TABLE SIZE: 650 x 1400 mm MAX ADMITTED LOAD: 1500 Kg HIGH PRESSURE COOLANT: 30 Bar TOOL MAGAZINE: CHAIN-TYPE ; 41 POS MAX TOOL DIAMETER: 120 (200) mm MAX TOOL LENGHT: 400 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: FANUC 16i-M WEIGHT: 16750 Kg Fgodpeyvlxksfx Alqjb OVERALL DIMENSIONS: 7135 x 5300 x 3426 mm ACCESSORIES: SWARF CONVEYOR ; GEAR BOX

Condition: used, machine/vehicle number: 008088, X axis working area: 3700 mm Y axis working area: 2100 mm Fjdpfxjx A Hbqe Alqogb Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 14

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpm Movement X/Y/Z : 600/650/500 mm Tool holder : HSK 63 In General: Year of manufacture:2020 Control system:Siemens 840 Dsl Travel range X/Y/Z:600/630/500 Rapid traverse X/Y/Z:120 m/min Spindle: Fgedey Ha A Eepfx Alqeb Technologie:Motorspindeln Drehzahl:17.500 U/min Leistung:35 Nm Drehmoment:80 Nm Werkzeugaufnahme:HSK-63 Swivel mount: Technology:A-axis or U-axis with counter bearing Drive:Direct drive (torque motors) Clamping bridge: Technology:Clamping bridge with 1x NC rotary table each Drive:Direct drive (torque motors) Table diameter:Ø 340 mm Max. table load:150 kg Max. fixture dimensions:Ø 675 x 450 mm Tool magazin: Technology:Chain magazine Tool changer:Pick-up Number of stations:105 Max. tool diameter:80 (160) mm Max. tool length:450 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Drive systems:Direct on all axes (linear motors) Hydraulic clamping:2x 3-circuit Chip removal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Separate cooling unit Support control:Pneumatic Tool breakage detection:Inductive Automation preparation:Profinet interface, automatic doors, automatic rinsing cycle :

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm Fedpfsq Nqkxsx Alqjgb MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg Fedpjwl R Ddsfx Alqsgb OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm Fedpfxoh Hfrnj Alqegb SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Fgedpfxsyqxxro Alqob Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Fodpfjxc Hi Usx Alqjgb Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2023 Control : Siemens 840Dsl Speed : 24000 rpm Movement X/Y/Z : 2600/1700/950 mm Tool holder : HSK-A63 Spindle: Technology:Swivelhead with Motospindle Speed:24.000 rpm Power (max.):15 kW Torque (max.):14,3 Nm Taper:HSK-A63 A-Axis:+/- 120° C-Axis:270° In general: Toolmagazine:18 stations Clampingsurface:2.350 x 1.700 mm Rapid travers in X/Y/Z:80/80/60 m/min Equipment/Accessory: Workpiecemeasurement:Touch probe, m&h RWP 20.50 Toolmeasurement:Laser, Hexagon Toolbreakagecontrol:Probe, m&h TS 35.20 Setup operations:Electronic Handwheel 3D-Extruder:CEAD S25 Granulatedryer-/conveyor:Vismec Fedsy E Ebqspfx Alqegb Further Accessory:Spindlechiller

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Carriage – travel Longitudinal travel (Z-axis): 1160 mm Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Tailstock Tailstock movement by hand Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment CNC control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum Fodpfxex Ahx De Alqjgb

Condition: used, maximum load weight: 2,872 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 11/2023, Year of construction: 2023, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional vehicle transport. ALGEMA FITZEL Euro-Trans 35-22/48X, fully equipped: lift axle, pendulum axle, electric winch, 100 km/h road approval, one previous owner, used twice, no signs of use, as new condition. Gross weight: 3,500 kg Unladen weight: 628 kg X-Line pendulum axles with 100 km/h approval 1 lift axle 1 electric winch with cable remote control, optionally upgradable to radio remote control Tires: 195/50 R13C 104N M+S on alloy wheels Loading dimensions: 4,850 x 2,222 mm, loading height 660 mm Overall dimensions: 6,520 x 2,222 mm, approach angle approx. 7.5° Standard equipment: Fgjdpfx Aey Ifwwelqeb • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable by shifting the center of gravity, with lowering and tilt damper • 2 extendable and infinitely laterally adjustable ALU loading ramps, with central locking, operable and lockable from both sides • 2 rubber buffers per loading ramp for secure locking when retracted • 1 adjustable ALU wheel chock bracket • Over 50 lashing points attachable on both sides for mandatory load securing • 1 certified load securing system according to TÜV certificate no. LS1206430Z1 • 2 x 13-pin cable connections, 1 m length, 12 Volt • 8 large rear lights including 2 reversing lights and 2 rear fog lamps • 2 rear marker lights, 4 amber side marker lights and 2 white front position lights for your safety • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support roller at the front allows easy single-axle maneuvering with rubber spring axle • Reflective side stripes (F-band) for your safety • 2 rear support rollers • 2 driving surfaces, 550 mm wide and ribbed for safe non-slip loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers for 100 km/h approval Special equipment: • Aluminum floor plate • Lift axle with automatic lowering when platform is unlocked • Hydraulic tilting mechanism • Electric winch with cable remote control, optionally with wireless remote control • Synthetic rope for winch • Remote control for electric winch • Power/battery supply for electric winch • Toolbox left and right • Side marker lighting • Anti-sway coupling • Theft protection lock - List price: €27,280 net plus €190 for COC documents - Although every effort is made to ensure accuracy, errors in the listing cannot be excluded. Subject to errors and prior sale!

Condition: used, maximum load weight: 2,860 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 12/2022, total width: 2,320 mm, Year of construction: 2022, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional car transport. Fitzel Algema Eder Euro-Trans 35-22/53X tarpaulin trailer, pendulum axle, 100 km/h approval, single owner, used twice, no signs of wear, as new condition. Gross weight 3,500 kg, Tare weight approx. 640 kg (including special equipment), payload 2,860 kg X-Line pendulum axles for 100 km/h approval Lift axle preparation Tyres: 195/50 R13C 104N M+S on alloy rims Loading dimensions: 5,300 x 2,180 mm, loading height 660 mm Overall dimensions: 6,620 x 2,220 mm, approach angle approx. 7.5° Standard equipment: • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable due to center-of-gravity shift with descent and tilt damper • 2 extractable and infinitely laterally adjustable ALU loading ramps, centrally lockable, operable from both sides, lockable • 2 rubber buffers per loading ramp for safe locking when retracted • Lashing straps, attachable on both sides at over 50 lashing points, for legally required load securing • 1 certified load securing according to TÜV certificate no. LS1206430Z1 • 1x 13-pin plug connection cable, 1 metre long, 12 volts • 8 large rear lights incl. 2 reverse lights and 2 rear fog lights • 2 rear outline marker lights, 4 orange side marker lights and 2 white front position lights - for your safety • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support wheel at the front allows for easy single-axle maneuvering with rubber-sprung axle • Reflective side stripes for your safety - F-band • 2 rear rolling supports • 2 driving tracks (550 mm wide, roughened) for safe, slip-free loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers required for 100 km/h approval Included special equipment: • Aluminum floor plate • High tarpaulin 5.30 x 2.30 x 2.00 m (internal loading dimensions LxWxH) - Complete aluminum frame with 2 support wheels, rollable as a unit - Front chamfered 600 x 600 mm - Incl. truck-grade tarpaulin, color black - Roll-up by hand on all 4 sides - Auxiliary loading mirror fitted front left - Winch clamp holder at the front right of the tarpaulin frame (tarpaulin height customizable) • Tarpaulin color: RAL black • High rear tailgate for tarpaulin • Right-hand side flap Fjdpfxey Ify Eo Alqsgb • Sliding curtain left and right Empty weight incl. special equipment only approx. 640 kg = 2,860 kg payload! - New list price according to equipment: €31,050 net plus €190 COC paper/document - Despite our best efforts, errors within the advertisement cannot be excluded. Subject to errors and prior sale!

Condition: good (used), Year of construction: 2010, machine/vehicle number: AA2/001307, functionality: fully functional, operating hours: 25,000 h, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 6,500 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 180 mm, controller manufacturer: NUM, total height: 2,750 mm, total length: 8,000 mm, total width: 4,000 mm, table length: 6,500 mm, table width: 1,350 mm, controller model: 1040, feed length X-axis: 6,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 45,000 m/min, feed rate Z-axis: 30,000 m/min, spindle motor power: 11 W, nominal power (apparent): 15 kVA, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 45,000 m/min, spindle speed (min.): 24,000 rpm, table height: 950 mm, Working travel of axes X-Y-Z: 6500 x 1350 x 250 mm Working area: 6500 x 1250 mm C-Axis = 640, B-Axis = 270 PRISMA milling unit with 5 interpolating axes X, Y, Z, C, B Electric spindle 11 kW, 600–20,000 rpm Tool holder HSK63 Working table with TVN pads and vacuum cups Cross laser projector on working table TVN vacuum cup Pneumatic clamps Tool magazine for 24 tools Drilling unit Vacuum pump 5.5 kW, 250 m³/h Fgodpjw Au N Sefx Alqsb CNC control NUM Operating system: Windows XP Xilog Plus Maestro Weight approx. 5,450 kg