Used Darley Run Press for sale (18,298)

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 1729, functionality: fully functional, empty load weight: 10,000 kg, workpiece width (max.): 5,500 mm, workpiece height (max.): 980 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item on time, no later than June 22, 2026! TECHNICAL DETAILS Workpiece width max.: 5,500 mm Workpiece height max.: 980 mm Number of working stations: 8 Number of cylinders per press level: 10 Number of clamping devices per press level: 10 MACHINE DETAILS Power of main motor: 1.5 kW Press drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,200 x 2,450 mm Unladen weight: 10,000 kg Transport packages: 1 Cedpfxsy Tviuj Ahnsrc EQUIPMENT CE marking Separate press stages Motorized rotation 2 working stations per side

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 2,200 mm, workpiece width (max.): 800 mm, workpiece height (max.): 40 mm, stroke length: 150 mm, machine/vehicle number: 52850199, TECHNICAL DETAILS Maximum plate size: 2,200 x 800 mm Maximum plate thickness: 40 mm Maximum stroke: 150 mm Crsdpfey Tn R Rjx Ahnsc Working pressure: 6 kg/cm² Total working pressure: 160 tons MACHINE DETAILS Total power: 17.3 kW Heating power: 13 kW Voltage: 380 V Current: 35 A Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,800 x 2,100 mm Weight: 5,900 kg EQUIPMENT Heating 8 cylinders, each with a diameter of 100 mm Heating boiler included

Condition: refurbished (used), functionality: fully functional, The 2024 general overhaul includes, among other things, the die roller, the hydraulic nut, the bearings, the main shaft, the oil pump with filter, and synthetic oil. Only the steel housing is older, but it is in excellent condition. The images of the production line in the hall are from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h MACHINE DETAILS Motor year of manufacture: 2024 Cooler with sieve year of manufacture: 2015 Conveyor belt year of manufacture: 2015 Feed screw year of manufacture: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die roller Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies of 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump Crjdpfx Aezaricehnoc 20 liters of 800/460 synthetic oil 1 new pressure piece (main shaft) Documentation of the overhauled and renewed parts

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Csdpfx Aeyvgiaehnsrc Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: new, Equipment: CE marking, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France Crodpjy U Hmgjfx Ahnsc 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: good (used), Year of construction: 1990, Roll compactor, Bergmann – used: Price ex works: only €950 (net) Credszbygrepfx Ahnec Manufacturer: Bergmann Type: PS 8100E Year of manufacture: 1990 Serial number: 05 3658 2845/90 Pressing pressure: to Weight: 750 kg 400V, 5.5 kW Condition: good Available: from Q4/2026 Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, shredding and compaction of the waste, reducing its volume up to ninefold. Continuous filling: The machine allows for continuous filling by all users. The feed shaft can also remain open during the working process, which facilitates and accelerates waste compaction.

Condition: good (used), Year of construction: 1999, Baling presses, HSM, 30-ton pressing force – used: Price ex works: only €2,950 (net) Manufacturer: HSM Type: 225.1 VL Year of manufacture: 1999 Machine number: 6124.834. N Serial number: 200014505 Pressing force: 30 tons 400V, 5.5kW Credpfx Ahjzbygfonjc Condition: good Available: from Q4/2026 Location: Hamburg

Condition: used, Older knee-lever press. Cjdpfxszbx Two Ahnjrc

Condition: used, book press Crsdozbx Tkepfx Ahnjc

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Cjdpezbxyqsfx Ahnjrc Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, For sale is a partially refurbished Presona baling press, with 50 t pressing force, 22 kW drive power, built in 2005 Credpfxozbxxao Ahnoc Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, For sale is a complete Bollegraaf baling system consisting of conveyor technology, baling press and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Credezbxw Aepfx Ahnjc Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Crodpfezbxwisx Ahnoc Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Codezbxvljpfx Ahnorc Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), functionality: fully functional, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, Dough dividing and molding machine +++ Top-of-the-line roll press +++ Fortuna Automat, size 3+ Head cleaning system with electric rear movement Dough dividing head with stainless steel blade, NEW Robust technology Dough divider with 3 molding plates Connection: 400V, 16A-CEE plug Credpfx Ahow H H N Senoc Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Options: Platform or trolley Molding plates Service package Maintenance contract Delivery service Spare parts box Training and commissioning

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, total width: 600 mm, total length: 700 mm, total height: 1,520 mm, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 1 kW (1.36 HP), type of input current: three-phase, DGUV certified until: 07/2028, overall weight: 375 kg, NEW NEW Bread Roll Press NEW NEW Semi-automatic dough divider and rounding machine, TOP model: 4-14 NEW proven technology … the original! Knives with a simple cleaning position! with 3 rounding plates Dough ring coated with easy-click system Dividing range: 130 to 250 grams/piece Dividing: 14 pieces Csdpfx Aheu Eaudjnjrc Machine is mobile DGUV V3 tested, only available from us Connection: 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW machine & SAB tested with warranty + spare parts service Option: Leasing & rental service Rounding plates Maintenance contract Service package Instruction & commissioning Loan machine service Many more bread roll presses in stock!

Condition: reconditioned (used), functionality: fully functional, total height: 1,520 mm, year of last overhaul: 2026, DGUV certified until: 07/2027, warranty duration: 6 months, total width: 600 mm, total length: 700 mm, input voltage: 400 V, Gostol semi-automatic roll divider, model 4-14 proven technology ... already successfully used in many applications! Stainless steel knives with 3 dividing plates Codpfxeyagtie Ahnerc robust design divides into 14 pieces DGUV V3 certified – only available from us Connection: 400V, 16A CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) New machine & SAB certified with warranty + spare parts service We also have other top-quality dough dividers in stock!

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2022, Fortuna Automat A 4 E roll former Dough divider and rounding machine Credpfjywadqsx Ahnjc Roll former Fortuna Automat, size 4 E with rounding stop Head cleaning with electric motor with stainless steel knives Dough input 1200 to 3600 g with rounding disc Connection 400V, 16A-CEE plug Used machine

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Cedpszbv H Iofx Ahnjrc Equipment and technical data: Press length: max. 2500 mm Press height: max. 1350 mm Working depth: max. 600 mm Pressing time: adjustable The vertical and horizontal press beams are moved electromechanically and interlock with each other; pressure is built up via frequency-controlled geared motors. Pressing pressure can be adjusted separately vertically and horizontally. Availability: short notice Location: 63934 Röllbach

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Gap in bed: 150 mm Controll: 2- hand controller Credezbvvvspfx Ahnjc Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Machine weight: 3700 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 100 t, stroke length: 300 mm, operating speed: 10 mm/s, Equipment: CE marking, safety light barrier, Bending capacity: 100 Ton Bending length: 3100 mm Backgauge: 550 mm Stroke length: 300 mm Bending speed: 10 mm/sec Supplied with: - 2 support arms - Integrated safetyscreen Crodpfezbvulex Ahnec - 6 axis controlled Y1, Y2, X, R, Z1, Z2 - Cabinet with many tools - User manuals Country of origin: Netherlands Motor power: 11 kW Machine (L×W×H): 400 x 230 x 290 cm Machine weight: 6350 kg

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Crodpjzbvm Ijfx Ahnoc Prior sale is reserved.

Condition: used, Very little used Antares model AKER 630/50-OO chamber type filter press. - Manufacturer: Antares - Model: AKER 630/50-OO - Type of filter press: Chamber type - Dimensions of filter plates: 630 x 630 mm - Number and material of plates: (49) polypropylene chamber plates and (2) end plates - Number of chambers: 50 - Closing of filter press: Electrohydraulic - Hydraulik Vrchlabí model SHA-45, electric motor 1.5 kW - Removal of filter plates: Manual - Filtrate discharge: Open delivery Cjdpfx Aozbua Hohnerc - Includes: control panel (switchboard is not included) Specifications: Plate Size: 630 x 630 # of Plates: 49 Delivery: Open Eyes: 1 Plate Type: Recessed Closure: Hydraulic

Condition: used, Eccentric Press, C-Frame Press, Helmerding EH 35 B, Used Machine Manufacturer: Helmerding Crjdey D Uhdopfx Ahnsc Type: EH 35 B Year of Manufacture: 1985 Weight: 2500 kg Technical Specifications: Press Capacity: 35 tons Stroke Length: 70 mm Table Dimensions: 600 x 450 mm Operating Modes: Continuous / Single stroke (Inching) Safety: Two-hand safety start control Dimensions: Overall Dimensions: 1020 x 1600 x 2400 mm Additional Information: Note: The base plate (bed plate) is not included with the machine.

Condition: excellent (used), C-Frame Press, Electric Press, Servo Press, Electric Press Tox Ecoline CMB008.407.A.001, Tox Ecoline CMB008.407.A.001, Used Machine Manufacturer: Tox Model: CMB008.407.A.001 (Ecoline) Year: 2011 Weight: 900 kg Overall Dimensions: 1250 x 1400 x 2610 mm Pressure: 5500 kg Stroke: 300 mm Cedpfx Ajuccicehnerc Max Speed: 200 mm/s We are offering a high-quality servo press that is the ideal solution for all precision and high-performance industrial tasks. This press provides exceptional advantages in both productivity and quality, making it the perfect choice if you are looking for a reliable, energy-efficient, and cost-effective solution. High Precision: The servo press ensures precise control, allowing for repeatable and accurate operation, with tolerances down to micrometers. Energy Efficiency: It consumes significantly less energy compared to traditional hydraulic presses, enabling more cost-effective long-term operation. Quiet Operation: Operates with low noise levels, creating a more pleasant working environment. Flexible Application: Versatile use across various industries, from automotive to fine mechanics. Programmable motion profiles allow for quick and easy reconfiguration for different tasks. Maintenance-Friendly: Minimal maintenance requirements, a reliable, long-lasting machine that leads to less downtime.