Used Danobat Rs-4000 S5 for sale (10,007)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to customer specifications. Chassis, Low-bed Semi-trailer Steel welded construction, drawbar plate with interchangeable 2 kingpin and 2 kingpin positions 24 tons, 2-speed landing gear, one-sided operation Foldable rear support 2 chock blocks with holder Aluminum side guard 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening sections to 3,000 mm Storage compartment for timber planks on gooseneck, transverse at the front Timber planks 70 mm for widening to 3,000 mm Telescoping Central tube frame in cleanly welded, interlocking telescoping frame sections. Extendable by a maximum of 6,000 mm and lockable approximately every 1,000 mm Locking with mechanical pin lock With sliding platform Tie-down eyes, low-bed 2 pairs of ring-type tie-down eyes, each 5 tons, at the front on the gooseneck; 11 pairs of tie-down loops embedded at the top and side in the outer frame, each 10 tons; 2 on the gooseneck, 9 distributed in the low-bed area; first tie-down eye 250 mm from the front and last at most 250 mm from the rear, spacing of tie-down eyes not greater than 1,100 mm 8 pairs of socket pockets embedded in the outer frame, inner dimensions 70 x 40 mm, (can be converted to 5-ton ring-type tie-down eyes, not included in the scope of supply) 3 pairs of folding tie-down eyes additionally embedded in the low-bed area, each 10 tons; 1 at the front of the low-bed, 1 in front of the 1st axle, and 1 behind the 3rd axle Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last 2 axles steerable, with automatic reverse locking via reversing light and manual locking function via a button on the vehicle Air suspension with lift and lower valve Wheels and Tires 235 / 75 R 17.5, manufacturer Fulda Steel rims in twin configuration, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab; truck must be appropriately prepared; no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED revolving beacon with holder, switched via parking lights (beacon removable) Hodpsi Ri Hnsfx Amyor 2 pairs of warning panels, double LED-lit and extendable to 3,000 mm 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / chequered plate surface Storage box embedded in the ramp to the gooseneck Then with 70 mm soft wood floor, steel/chequered plate surface in the wheel arch area Rear slope with 70 mm soft wood floor Side Walls 25 mm aluminum hollow profile, 400 mm high, at the front and side on the gooseneck, pluggable Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally movable Covered with wood Hydraulically operated via tractor PTO with flow control Hydraulic connection with SVK coupling NW 10/3, without connect

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Hjdpfx Amoza Egnjyor Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Hjdpfsw Eu Akjx Amyjr

Condition: good (used), Riello RS50 gas burner Hodpfx Aspiqh Ijmyor Power: 581kw Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: good (used), ZwickRoell Temperature Chamber for AllroundLine Model: TEE160/LN2 40S The TEE160/LN2 40S is a specialized temperature chamber designed primarily for material testing in combination with ZwickRoell testing machines (specifically the AllroundLine). Flexible Application ZwickRoell’s innovative temperature chamber ensures a flexible testing system tailored to customer needs—without compromise. This guarantees reliable test results well into the future. The safety door function ensures operator protection in compliance with European safety regulations. The chamber door serves as a safety door with an interlocking mechanism. Precise Temperature Control The temperature chamber creates extremely uniform and precise conditions for specimens throughout the entire chamber volume. This ensures accurate and repeatable test results. Hsdozcpwpspfx Amyer Key Specifications Temperature range: -40°C to +160°C. Cooling system: Liquid nitrogen (LN2) for rapid cooling rates. Temperature Chamber for AllroundLine Application: Specifically designed for integration into materials testing machines to perform mechanical tests (e.g., tensile or compression tests) under controlled environmental conditions. All panels in the door area (interior and exterior) are made of stainless steel. Dismountable heavy-duty base frame Dimensions: W x D x H = 1400 x 600 x 800 mm Chamber: W x D x H = 440 x 530 x 650 mm Test opening: 110 mm Power supply: 400/230 V, 16 A, 3N~, 50/60 Hz Cooling via LN2 (liquid nitrogen) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 1905, Type of unit: Eisemann G4000P generator, 230 V1, 14.8 A, 3.4 kVA, Pmax 3.7 kVA, 3000 rpm, 50 Hz, insulation class F/70 dB(A). Engine: Honda GX 240 (240 cc), weight: 62 kg. For sale to commercial customers only. IN CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE. INCLUDING EQUIPMENT + ACCESSORIES. Hsdpoiadmrofx Amysr

Condition: used, mileage: 124,606 km, power: 260 kW (353.50 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 14,320 kg, maximum load weight: 11,680 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, next inspection (TÜV): 01/2026, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 4, total height: 99,900 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), onboard computer, power assisted steering, seat heater, soot filter, traction control, * German vehicle Hedpfjwc Agfjx Amyer * 1st owner * Condition, see photos * Original only 124,606 kilometers * TÜV until 01/2026 * Documentation and inspection book available * Faun Roptopress 521L * 22 m³ volume * Zöller 2301 tipping system * Split automatic lifter 02301 Delta * Container sizes 80-1300 liters * Econic cab with 4 seats * Spacious cab with low entry - ideal for frequent stops * Folding door on the passenger side * Air conditioning * Rearview camera * Cruise control * Stop brake * Engine brake * 3rd axle steering axle * Liftable trailing axle * Comfort driver's seat with air suspension * Heated seats * Electric windows * Electric mirrors * Windshield with band filter * On-board computer * Automatic transmission * Rotating beacons * Work lights * ABS and ASR * Differential lock * Central lubrication * Wheelbase: 3,900 + 1,400 mm * GVW: 26,000 kg * Unladen weight: 14,320 kg * Payload: 11,680 kg If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV (German Vehicle Inspection Association), without a new SP (Special Vehicle Inspection Association), and without a new UVV (German Accident Insurance Regulations). You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer is not misled about their condition and suitability. Inspections and testing are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Condition: used, mileage: 184,846 km, power: 240 kW (326.31 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 15,720 kg, maximum load weight: 10,280 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, air conditioning, cabin, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * 2 x available * Faun Variopress 522 waste collection container Hodpfjvhprajx Amyer * Volume: 22 m³ * Zöller dumping system 2301 * Split automatic lifter Euro Delta Premium * Container sizes 80-1300 liters * Econic cab with 3 seats * Spacious cab with low entrances - ideal for frequent stopovers * Folding door on the passenger side * Right-hand drive - so that the driver does not have to get out in traffic during stops * Air conditioning * Reversing camera * Cruise control * STOPPING BRAKE * Engine brake * Turn assist system * Comfort driver's seat, air suspension * Seat heating * Electric windows * Electric mirrors * Electric sunblind * Windshield with band filter * On-board computer * Automatic transmission * Full air suspension * 3rd axle steering axle * Rotating beacons * Working lights * Snow chains * Hand washing system * Daytime running lights * ABS and ASR * Differential lock * Central lubrication * Wheelbase: 3,900 + 1,400 mm * Max. gross vehicle weight: 26,000 kg * Unladen weight: 15,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 203,424 km, power: 240 kW (326.31 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 15,300 kg, maximum load weight: 10,700 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, air conditioning, cabin, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * 2 x available * Faun Variopress 522 waste collection container * Volume: 22 m³ * Zöller dumping system 2301 * Split automatic lifter Euro Delta Premium * Container sizes 80-1300 liters * Econic cab with 3 seats * Spacious cab with low entrances - ideal for frequent stopovers * Folding door on the passenger side * Right-hand drive - so that the driver does not have to get out in traffic during stops * Air conditioning * Reversing camera * Cruise control * STOPPING BRAKE * Engine brake * Turn assist system * Comfort driver's seat, air suspension * Seat heating * Electric windows * Electric mirrors * Electric sunblind * Windshield with band filter * On-board computer * Automatic transmission Hodpfx Amey Rgdqoyjr * Full air suspension * 3rd axle steering axle * Rotating beacons * Working lights * Snow chains * Hand washing system * Daytime running lights * ABS and ASR * Differential lock * Central lubrication * Wheelbase: 3,900 + 1,400 mm * Max. gross vehicle weight: 26,000 kg * Unladen weight: 15,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Hsdpfoyf E N Tjx Amyjr Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Condition: used, Two-side evaporator Goedhart -Type: DRS 52504 -Cooling capacity: 22.7 kW -Fin spinning: 4 mm Hjdpjxpughjfx Amyor -Fans: 2 x 500 mm -Dimensions: 2260 x 1600 x 530 mm -Stainless steel housing and block -Volume: 28 L -Quantity in stock: 5 -Reference number: CH 571 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Year of construction: 2007, machine/vehicle number: Roboter 3251892 / Steuerung 591079, overall weight: 1,480 kg, load capacity: 130 kg, arm reach: 2,650 mm, This is a used industrial robot, Reis Robotics RV130, equipped with an RS5 controller, year of manufacture 2007. The system is designed for heavy-duty industrial applications and is typically used in palletizing, handling of large components, as well as welding and assembly processes. The robot offers a payload capacity of 130 kg and a reach of approximately 2650 mm across 6 axes. Its robust construction is engineered for continuous industrial operation and it is sold complete with controller and peripherals. Hedpfxsy Nnxme Amyor

Condition: used, Year of construction: 2007, overall weight: 1,480 kg, load capacity: 130 kg, arm reach: 2,650 mm, This is a used Reis Robotics RV130 industrial robot with RS5 controller, manufactured in 2007. The system is engineered for heavy-duty industrial and automation applications, and is typically deployed in areas such as palletizing, heavy component handling, as well as welding and assembly processes. The robot has a payload capacity of 130 kg and a reach of approximately 2,650 mm, with 6 axes of motion. The integrated hydraulic compensation system enhances dynamic movements and reduces mechanical stress during operation. Hsdpey Nnwijfx Amysr

Condition: excellent (used), functionality: fully functional, Surface planer HA 4 Planing width 450 mm Total table length 2500 mm Feed table 1500 mm Machine height 820 mm Max. chip thickness 15 mm Knife shaft rotation 4800 rpm Motor power 4 hp Weight 660 kg Hjdpfx Ameinkfnoyjr 3-knife shaft Transport available for an extra charge! Due to the age of the used machine, the warranty is excluded when selling to commercial customers.

Condition: used, Year of construction: 2002, MANUFACTURER: RENNER MODEL: RS55 SERIAL NO.: 5333 Hjdpfx Amjyiy Ncjysr YEAR: 2002 POWER (kW): 55 OUTPUT (m3/min): 7.96 PRESSURE (bar): 7.5

Condition: good (used), Working wheel dimensions (od x id x width) Ø610x80xØ304.8 mm Brand CNC FANUC Model CNC 21 Oi TB Maximum length between points 1060 mm Max. travel Z axis 750 mm Max. length to be ground 600 mm Point height 225 mm Ø min/max to be ground 10 - 300 mm Max. weight of the piece 125 Kg Max. travel X axis 325 mm Grinding wheel speed 45 m/s Main motor power 11 Kw Working head speed 30 to 1000 rpm Working head cone MORSE 5 Working head motor power 12 Nm Tailstock cone MORSE 4 Tailstock quill travel 70 mm Tailstock hydraulic movement 150 mm Total power 22 Kw Length 2300 mm Hjdpfxjtrgugo Amyjr Height 1900 mm Width 2634 mm Weight 7750 Kg Accessories Cooling equipment with paper filter; MARPOSS meter, positioner and balancer;

Condition: used, Year of construction: 2007, operating hours: 10,000 h, machine/vehicle number: ET212, Used Labeling Machine PE LABELERS Universal Master up to 7500 bph The Machine delivers advanced technology for labeling glass bottles, meeting production demands of up to 7500 bottles per hour. Furthermore, P.E. Labellers manufactured this machine in 2007, ensuring precise operations with its robust design and integrated features. Technical specifications and performance of the Used PE Labellers Labeling Machine The labeller includes eight rotating plates and five labeling stations. Specifically, three stations apply adhesive labels, while two use cold glue. The machine rotates clockwise, which streamlines bottle flow management. Additionally, its manual adjustment system for both the head and labels enables quick adaptations to different formats, thereby enhancing flexibility. Hodpfx Asvgu Udsmyor Production capacity and configuration The labeller handles glass bottles with a maximum diameter of 120 cm and a standard 0.75-liter format. Consequently, it operates at a top speed of 7500 bottles per hour, making it ideal for medium-scale production lines. Moreover, the system applies labels to the front, back, and neck of each bottle, ensuring a high-quality, professional finish. Labeling method and management in the Used PE Labellers Labeling Machine This machine applies labels using adhesive and cold glue methods. Therefore, this dual approach ensures compatibility with a wide range of label designs and materials. Meanwhile, operators manually adjust the system to maintain precise control during each production batch. Current state and operational specifications The machine remains in storage; however, it is ready for immediate deployment. It has recorded 10,000 working hours, yet it still offers substantial operational capacity. Furthermore, its robust build, weighing 2250 kg, ensures stability and durability even under high-speed conditions. Electrical data and power requirements The labeller PE LABELERS Universal Master up to 7500 bph runs on 400 V, with an installed power of 5 kW and a frequency of 50 Hz. As a result, its electrical configuration meets industrial standards, ensuring efficient energy usage for extended operations. Additionally, its energy efficiency supports long-term cost savings. Applications and technical advantages The Used Labeling Machine PE LABELERS Universal Master up to 7500 bph ensures efficient and accurate label placement. Similarly, its versatile labeling stations handle bottles of various shapes and sizes without compromising output quality. Consequently, this versatility makes it a reliable option for many bottling operations. Technicians and industry experts rely on this machine for its performance and customizable configurations. Above all, it represents an excellent choice for demanding bottling applications.

Condition: used, functionality: fully functional, Maximum workpiece length: 500 mm Minimum workpiece length approx.: 5 mm Maximum workpiece length for plunge grinding: 50 mm Max. grinding diameter without steady rests: 100 mm Max. diameter: 240 mm Workpiece Swivel: 90° Grinding spindle slide Min./max. swivel: 30° Min./max. transverse movement including 300 mm quick adjustment: 100 mm Wheel diameter after rotation Hsdpfxswhp D Uj Amyer 1st degree: 320 - 400 mm 2nd degree: 260 - 320 mm Max. workpiece weight between centers: 60 kg Max. workpiece weight in chuck: 20 kg Max. workpiece weight in faceplate: 20 kg 8 workpiece spindle speeds: 45 - 500 rpm Min./max. Tilt: 12° Min./max. longitudinal travel: 2 - 500 mm Infinitely variable table travel: 0.5 - 5 m/min Handwheel adjustment: 2 and 20/rev

Condition: used, For inquiries regarding the attachment, Mr. Herden (by phone) will be happy to assist you. Westtech Woodcracker CS545 compact grapple saw / incl. endlessly rotating tiltator / NEW unit / in stock & immediately available Cutting diameter (mm): 540 Grapple opening (mm): 1,270 Own weight (base – full equipment) (kg): 610 – 780 Recommended oil flow main circuit (l/min): 50 – 100 Recommended oil flow auxiliary circuit (l/min): 35 – 50 Recommended operating pressure (bar): 200 - 250 Carrier vehicle operating weight (t): 8 – 15 Features: - incl. endlessly rotating tiltator - incl. automatic lubrication system for tiltator We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...), available immediately. Our warehouse has a wide selection of various products from Westtech, ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. We are happy to provide you with a financing offer upon request. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. Hsdpfxoyi R Atj Amysr We provide you with the complete range of Westtech Woodcracker products! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application in forestry Please contact Marius Herden for more information.

Condition: used, Year of construction: 2004, Format: 320 ?? 550 mm Equipment: Sheet feeder: Two drum feeders with gripper system Belt conveyor channel for product conveying Surface with rice paper structure to protect the product Front stop made of aluminum Side guides with sorting screws for sheet positioning Screw ejector for precise bow positioning Sheet control system: Hsdpfx Amjyxqxbsysr Double sheet inspection using mechanical thickness measurement Misaligned bow detection using photocell Photocell-controlled activation of the second feeder and glue injection timing Glue unit: Hot melt or cold glue application (configurable) Glue injector with digital keyboard setting Delivery: Double roller press station for optimal adhesion Inclined conveyor belt for shingled product stacking at the exit Control system: SPS control unit Touchscreen control panel Safety system with light barriers Technical data: Min. Format 100 ?? 150 mm Max. Format 320 ?? 550 mm Max. sheet thickness 5 mm Maximum mechanical speed 6,000 cycles/hour

Condition: excellent (used), ZVE152724 Swivel Motor Spindle 24000 HSK-T40 Milling spindle for HT45PM Supplier: Siemens Weiss Technical data: Speed: 24,000 rpm Torque: 21.5 Nm (S1) Power: 11 kW (S1) Interface: HSK-T40 Clamping torque: 300 Nm Lubrication: Grease; lifetime lubricated Drawing no.: 180020 Hjdpfx Amexxamfsyjr

Condition: used, Year of construction: 1990, Decoiler Coil weight: 2,5 ton Hodpfx Amouqdhkjyjr Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min Standard configuration DREHER - Model WAV-MD-25, YOM 2000Electronic universal roller feedSheet width max. 510 mm Sheet thickness max. 6.5 mm Number of feed rollers 2 Diameter of feed rollers 125 mm Feed speed 137 m / min Feed length 0 - 9999.99 mm Feed accuracy +/- 0.05 Drive power 5.5 kW

Condition: good (used), functionality: fully functional, overall weight: 105 kg, total height: 1,400 mm, total length: 1,850 mm, total width: 1,150 mm, miscellaneous Hydraulische Baumschere mit Säge für Manitou Producing company Dorfmeister Type Holz Fällgreifer SS 550 Height (mm) 1,400 Length (mm) 1,850 Weight (kg) 105 Hedpfx Ajyhhvzemyjr Width (mm) 1,150

Condition: ready for operation (used), Year of construction: 2008, total height: 2,275 mm, total width: 4,040 mm, overall weight: 13,400 kg, product length (max.): 7,033 mm, number of axes: 2, Centerless grinding machine manufactured in 2008. This DANOBAT 327 MDA features a maximum wheel width for plunge grinding of 500 mm and a peripheral wheel speed of 50 m/s. It has a grinding wheel motor power of 55 kW and a regulating wheel speed that is infinitely variable from 10 to 225 min⁻¹. If you are looking to get high-quality grinding capabilities, consider the DANOBAT 327 MDA machine we have for sale. Contact us for further details. • Gross mass: 14,500 kg (including packaging) • Opening between wheels: 3 to 200 mm (with new wheels) • Maximum wheel width for plunge grinding: 500 mm • Wheel axis height from floor: 1150 mm • Grinding wheel dimensions (OD x width x ID): 650 x 500 x 304.8 mm • Minimum grinding wheel OD: 510 mm Hjdpfx Aeyvfvhomyjr • Peripheral wheel speed: constant 50 m/s • Regulating wheel dimensions (OD x width x ID): 350 x 500 x 203.2 mm • Minimum regulating wheel OD: 275 mm • Regulating wheel speed: stepless 10 to 225 rpm • Regulating wheel head inclination (part feed): -5° to +5° • Regulating wheel carriage swivel (taper correction): -2° to +5° • Maximum wheel profile depth: 12 mm • Maximum profile inclination (via tracer template): 30° • Dresser feed rate (grinding wheel): 100 to 300 mm/min • Regulating wheel dressing speed: 225 rpm • Dresser height adjustment: mm • Grinding wheel motor power: 55 kW • Regulating wheel motor torque: 8 Nm • Dresser motors (each): 0.55 kW • Grinding head lubrication pump motor: 0.37 kW • Grinding head lubrication system: 100 l capacity, 6 l/min flow, 2 MPa (20 bar) safety valve, oil FD-5 (ISO 3498) • General lubrication system: 6 l capacity, oil G-68 (ISO 3498)

Condition: used, Westtech Woodcracker CS510 Crane Grapple Saw for Cardanic Mounting Available immediately Specifications: - Cutting diameter: 540 mm - Gripper opening width: 1,270 mm - Own weight (with full equipment): 360–400 kg - Recommended oil flow rate: 50–110 l/min - Recommended operating pressure: 200–280 bar - Saw chain lubrication: Oil Hodpsyfu Eqefx Amyor We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We provide the complete range of Westtech Woodcracker products for you! Rental possible = More information = Condition: New Please contact Tobias Ebert for further details.