Used Daewoo Doosan Puma V550 for sale (404)

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Operating hours: 1 Engine: DOOSAN DP158LC Power standby: 513 kW Speed: 1,500 rpm Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Isdpfx Apeua Tl Aoceig Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Equipment: Battery charger 5 Amper, battery disconnect switch

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 627 mm, Tested Forklift Battery for Your Truck - 48V 5PZS 625AH - DIN A + 1-year warranty + Includes aquamatic water filling system + Includes end connector & REMA 320 plug (other plugs can be installed upon request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 827 mm Width 627 mm Height 625 mm Weight: approx. 860 kg Suitable for the following models and more: Linde E15 S- 355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16 - 386-02 - side battery change Linde E16 C - 1275-00 Linde E16 C - 335-00 Linde E16 L - 335-00 Linde E16 P - 1275-00 Linde E16 P - 386-00 Linde E16 P - 386-02 - side battery change Linde E18 - 335-00 Linde E18 - 386-00 Linde E18 - 386-02 - side battery change Linde E18 C - 335-00 Linde E20 L - 386-00 Linde EG 16-1275-02 - side battery change Linde EG16 H -1275-02 - side battery change Linde EG16 P -1275-02 - side battery change Linde EG16 PH -1275-02 - side battery change Linde EG20 PH -1275-02 - side battery change Linde T30 R - 143-00 Still R20-15 Still R20-16 Still R20-18 Still RX20-15 Jungheinrich EFG Series Jungheinrich EFG 18 Jungheinrich EFG 216 Jungheinrich EFG 216 k Jungheinrich EFG 218 Jungheinrich EFG 218 k Jungheinrich EFG 316 Jungheinrich EFG 316 k Jungheinrich EFG 318 Jungheinrich EFG 318 k Jungheinrich EFG DF 16 Jungheinrich EFG DF V16 Toyota 7FBE15 Toyota 7FBEF15 Toyota 8FBEK16T Toyota 8FBEK18T Toyota /BT CB 1600 Crown SC1018 Crown SC3240 -1.8 Crown 5340 - 1 Caterpillar EP 16CPNT Caterpillar EP 16CPN Caterpillar EP 16C Caterpillar EP18CPNT Cesab Blitz 416 Daewoo B16X-5 Clark GEX 18/20S Clark GTX18 Clark GTX20S Doca7H Hyster J1.8XNT Komatsu FB18M Mitsubishi FB16 Nichiyu FBT15P Nichiyu FBT15P-75 Nissan G1N1 TX16 OM-Pimespo-Fiat XE 18 Iijdpoy Rnmmjfx Apcjg Yale ERP 16VT Standard battery sizes available, please inquire. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Iisdoy Rnqfspfx Apceg Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: new, Selling price: € 1.000, US$ 1.053 Bucket volume: 7.1 m^3 Buckets for Liebherr 974 and Terex RH40 Orange bucket is for Doosan DX500 Iisdpfx Ajpa Rqcspceg We become your solution partner for your mining sites. Contact for detailed information, price is representative.

Condition: used, Year of construction: 2023, ---- Iiedpfxozkzx To Apcog * Engine: Doosan D34 Stage V * Generator: Stamford S1L2-Y1 * Continuous power: 60 kVA * Weight: 1,850 kg

Condition: as good as new (ex-display), Year of construction: 2021, total length: 1,700 mm, total height: 2,000 mm, Automate palletizing with the HYDRA 20 cobot palletizer: 👉 20 kg payload 👉 Up to 2.2 m palletizing height 👉 12-month warranty Inspection: Demonstrations are available by appointment at the FJM showroom, 2486 Pottendorf, Baden district near Vienna. Condition: Demonstration machine (minor cosmetic wear) → Collaborative robot DOOSAN ROBOTICS Cobot H2017 Ijdpfxey Iz Tns Apcjig → Robot base and controls → Pallet frame for 2 Euro pallets, including sensors → FJM suction gripper with aluminum plate and 6 suction cups → Vacuum generation with ejector via external compressed air → FJM palletizing software, including PC, mounting console & touchscreen A detailed description and price conditions for the cobot palletizer with a 20 kg payload can be found in the attached PDF! #palletizing #palletizingrobot #usedrobot #palletizingsystemforcardboardboxes #endtoendautomation HYDRA cobot palletizer by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH

Condition: good (used), functionality: fully functional, mileage: 28,093 km, gearing type: automatic, fuel type: diesel, fuel consumption per hour: 15 l/h, fuel tank capacity: 330 l, color: orange, overall weight: 18,865 kg, empty load weight: 18,865 kg, operation weight: 18,865 kg, maximum load weight: 6,000 kg, lifting power: 10 kg/m, lifting height: 4,000 mm, tire size: 23.5R25, tire condition: 90 %, drive condition: 100 %, chain condition: 80 %, axle configuration: 2 axles, number of seats: 1, first registration: 01/2026, emission class: euro4, brakes: other, suspension: air, Year of construction: 2019, operating hours: 8,000 h, Equipment: air conditioning, cabin, Doosan DL300 Wheel Loader - Excellent Condition! Year: 2019 Mileage: 28,093 km Hours: 8,000 h Condition: 100% Functional - Ready to work! Key Features: Powerful 202 kW engine (approx. 275 HP) Automatic transmission 3 m³ bucket Comfortable air-conditioned cabin Orange color Tires at 90% condition Iiedpoziagasfx Apceg Battery/electrical system at 90% Maintenance up to date Very well-preserved machine with excellent maintenance. Perfect operation, no issues whatsoever. Ideal for construction, quarries, earthmoving works, or rental.

Condition: good (used), functionality: fully functional, mileage: 3,910 km, gearing type: automatic, fuel type: diesel, fuel consumption per hour: 15 l/h, fuel tank capacity: 330 l, color: orange, overall weight: 18,865 kg, empty load weight: 18,865 kg, maximum load weight: 6,000 kg, lifting height: 4,000 mm, tire size: 23.5R25, tire condition: 90 %, drive condition: 100 %, chain condition: 90 %, axle configuration: 2 axles, number of seats: 1, first registration: 01/2018, emission class: euro4, mast type: other, brakes: other, suspension: hydraulics, Year of construction: 2019, operating hours: 9,706 h, machine/vehicle number: DWGCWLDGHJ1020247, Equipment: additional headlights, air conditioning, cabin, hydraulics, standard shovel, 🚜 Doosan DL300 Wheel Loader - Excellent Condition! 🔧 Year: 2018 📍 Mileage: 3,910 km ⏱ Hours: 9,706 h 🎯 Condition: 100% Functional - Ready to work! Key Features: Iiodpfszh Ixnox Apcsg Powerful 202 kW (approx. 275 HP) engine Automatic transmission 3 m³ bucket Comfortable air-conditioned cabin Orange color Tires at 90% wear Battery/electrical system at 90% Regular maintenance up to date Very well-maintained machine with excellent care. Perfect running condition, no issues. Ideal for construction sites, quarries, earthmoving, or rental.

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Iijdpfxjzf Hyrs Apcog Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, Equipment: CE marking, documentation/manual, emergency stop, ZDV Series - Circular Type Dryers For drying after deburring and polishing Ijdpfx Apel Sm N Teceig Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,658 mm, total width: 432 mm, Tested forklift battery for your forklift - 80V 4PZS 620Ah - Special tray 2 + 1-year warranty + Includes aquamatic filling system + Includes end discharge resistor & REMA 320 connector (other connector types can be fitted on request) Iedpfxsy Rnq So Apcoig + Capacity: minimum 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length 1,658 mm Width 432 mm Height 784 mm Weight: approx. 1,550 kg Suitable for the following models and more: Jungheinrich EKX 513 Toyota FBM20 Toyota FBMF16 Toyota FBMF25 Toyota/BT VCE 135 Bradshaw T20 Caterpillar EP20K Caterpillar EP20N Caterpillar EP25K Caterpillar EP25K PAC Caterpillar EP30CN Charlatte T135 Charlatte T135 EVO Combilift SL Daewoo B22/25 X-5 Daewoo B22/25 XL-7 Daewoo B25 X Daewoo B30 Daewoo B30 X-5 Daewoo B32 Daewoo B35 X Dimos EFY3004 Dimos EFY3504R Doosan B22X Doosan B22X-5 Doosan B25X-7 Doosan B30NS Doosan B30X Doosan B35NS Hubtex MD 30 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 60 Mitsubishi FB25 Mitsubishi FB25AN Mitsubishi FB25K PAC Nissan 1Q2L25Q Utiley UT3OPFE Other standard battery sizes available on request. Transport can be arranged.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Ijdsrx Rxtjpfx Apcjig Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: good (used), functionality: fully functional, Vacuum cutter ALPINA SWOOPER SWV 550 S, 550-liter capacity. If you are interested, please let me know. Ijdpfxezmvwpo Apcsig

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Iijdpfx Ajx Rqkuopcog Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: used, Year of construction: 2023, – Engine: Doosan D18 Stage V – Generator: Stamford Sol 2-P – Continuous power: 30 kVA Iisdjzkzxmspfx Apceg – Weight: 1,290 kg

Condition: used, Year of construction: 2021, operating hours: 5,000 h, functionality: fully functional, A scrap shear from Bronneberg is for sale. Iisdpfx Apszhwnxscsg - 7 m feed table - 125 kW soft starter The machine can be inspected at any time.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,778 mm, total width: 2,977 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, product length (max.): 3,635 mm, number of axes: 3, This 3-axis SMEC MCV 5500 was manufactured in 2022. It features an X-axis travel of 1050 mm, Y-axis travel of 550 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of 1200 x 540 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the SMEC MCV 5500 vertical machining centre we have for sale. Contact us for further details. - CNC Control: Siemens SINUMERIK 828D incl. OPERATE and ShopMill- T-Slot Size: 4 x 18H8 mm- T-Slot Distance: 125 mm- Distance Spindle Center to Column: 580 mm- Distance Table to Spindle Nose: 130-650 mm- Ball Screw X-Axis: Ø 40 x 12 mm- Ball Screw Y-Axis: Ø 40 x 12 mm- Ball Screw Z-Axis: Ø 40 x 10 mm- Feed Motor X-Axis: 3 kW- Feed Motor Y-Axis: 3 kW- Feed Motor Z-Axis: 3 kW- Rapid Traverse X/Y/Z: 36/36/30 m/min- Feed Rate X/Y/Z: 1-15,000 mm/min- Spindle Motor: 22 kW (30 min) / 18.5 kW (Cont.)- Max. Spindle Torque: 141 Nm- Spindle Taper: BBT 40- Tool Storage Capacity: 30 positions- Max. Tool Weight: 8 kg- Max. Tool Length: 300 mm- Max. Tool Diameter: Ø 80 mm (Ø 125 mm with adjacent empty pockets)- Tool Change Time: 1.6 s- Chip-to-Chip Time: 5 s- Coolant System Tank Capacity: 365 L- Coolant Flow Rate: 29.1 L/min- Internal Coolant Pressure (IKZ): 20 bar- Hydraulic System Capacity: 3.9 L- Hydraulic System Max. Pressure: 9 bar- Max. Power Requirement: 32 kVA- Voltage: 400 V- Compressed Air Connection: 6 bar- Machine Dimensions (W x D x H): 3635 mm (incl. chip conveyor) x 2977 mm x 2778 mm- Additional Equipment:* Hinge belt side chip conveyor with rollers* Oil skimmer with endless belt* Coolant unit with coolant gun and bed flushing* Spindle oil cooling system* Air gun* DXF Reader* Electronic handwheel* 3-color status signal light* Work area lighting Isdpfsz A Ubpjx Apcoig Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. • Optional: • 5 pcs. External turning tool holders SQ20, BMT 55 (500-0696) • 2 pcs. Facing tool holders R/L (500-0701) • 1 pc. Double external turning tool holder HS/GS (500-0868) • 2 pcs. Double external turning tool holders HS (500-0705) • 1 pc. Parting tool holder (500-0709) • 7 pcs. Boring bar holders; BMT 55 ID 32 (500-0698) • 2 pcs. Triple internal turning tool holder GS (500-0707) • 2 pcs. Cover IK (500-0711) • 1 pc. Reducing sleeve set Boring (n/a) • 2 pcs. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. Adapter set PRECI-FLEX ER25 (BMT 55P) (500-0523) • 2 angled externally cooled external heat sinks Eppinger • 2 straight externally cooled external heat sinks Eppinger Additional Information As new, showroom model Iisdsyrtbqepfx Apcsg Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 710 mm, turning diameter: 710 mm, spindle motor power: 11,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, spindle nose: JIS A2-8, overall weight: 14,000 kg, tool length: 300 mm, tool weight: 10 g, travel distance W-axis: 1,550 mm, Equipment: documentation/manual, Turn mill center OKUMA Multus B400 TECHNICAL CHARACTERISTICS: Iisdpfx Apsyqx Rzscjg CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: 1 × One-Touch IGF software option 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Year: 2010 Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket Iiodpoyyy H Rjfx Apceg - hydraulic Volvo quick coupler - auxiliary hydraulic circuit up to the fork carrier - air conditioning - central lubrication - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Also available with low-cost delivery!

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 48 V, total height: 752 mm, total length: 890 mm, total width: 606 mm, Tested forklift battery for your truck – 48V 5PZS 500Ah – special battery tray + 1 year warranty + incl. aquamatic system + incl. end discharge cable & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 890 mm Width 606 mm Height 752 mm Weight: approx. 930 kg Suitable for the following models and others: Still RX 20-15 Still RX 20-20 Ijdpey Rnmyjfx Apceig Still RX 20-20 P Toyota 5FBE15 Bendi B40/48E-180D Caterpillar EP16N Doosan B20X-5 Hyundai 18BT-9 JAC CPD25 Manitou ME 318 Mitsubishi FB16KT Nichiyu FBT80 Common battery sizes available, feel free to inquire. Transport possible.

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 880 mm, total length: 2,460 mm, total width: 735 mm, Tested forklift battery for your forklift - 80V 6PZS 930Ah - special tray + 1 year warranty + Including aquamatic system + Including end discharge device & REMA 320 connector (other connectors available on request) + Capacity: minimum 90–100% (C5 capacity protocol will be supplied upon delivery) + Year of delivery: 2024 Dimensions: Length: 2,460 mm Width: 735 mm Height: 880 mm Iisdoy Rnpuspfx Apcsg Weight: approx. 2,300 kg Suitable for the following models and others: Still MX-X Crown TSP 7000 Bulmor EQN 40-50 Caterpillar EP50N Daewoo B40 X Dimos BMS 30/89 Doosan B45X-5 Doosan B50X-5 Hubtex MQ 45 Hubtex MQ 70 Hubtex MSU 40 Hyundai 50B-9 Hyundai B40-9 Steinbock-Boss WA 15 Kalmar EC 4-500 Kalmar ECD 50-6 Kalmar ECD 55-6 Kalmar ECE 50-6 Kalmar ECF 70-6 Kalmar ECG 55-6 Common battery sizes available; please enquire. Transport possible.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 80 V, total height: 635 mm, total length: 1,030 mm, total width: 840 mm, Tested forklift battery for your lift truck – 80V 5PZS 625AH – special tray + 1 year warranty + incl. Aquamatik + incl. end connector & REMA 320 plug (other connectors available on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,030 mm Width: 840 mm Height: 635 mm Weight: approx. 1,540 kg Suitable for the following and other models: Toyota 8FBMT35 Carer Z25HD Carer Z25KN Caterpillar EP30K Caterpillar ЕР30КРАС Daewoo B22/35 X-5 Daewoo B30 Daewoo B35 X Doosan B32X Doosan B35X-5 Hyster E2.50XM Iijdpjy Rnqxofx Apcjg Common battery sizes available, feel free to inquire. Transport possible.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 80 V, total height: 625 mm, total length: 1,023 mm, total width: 849 mm, Tested forklift battery for your forklift - 80V 5PZS 625Ah - DIN A + 1 year warranty + Includes Aquamatik watering system + Includes terminal discharge leads & REMA 320 connector (other connectors can be installed on request) Iijdpfjy Rnq Eex Apcog + Capacity: min. 90–100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,023 mm Width: 849 mm Height: 625 mm Weight: approx. 1,470 kg Suitable for the following models and more: Linde E25-336-00/Flat Linde E25/-L/-RL-387-00 Linde E25 S-1276-00 Linde E25 S-336-00 Linde E30-336-00/Flat Linde E30-387-00 Linde E30 L - 1252-01 Linde E30 L - 387-00 /side battery change Linde E30 RL - 387-00Sti Linde E30 S - 1276-00 Linde E30 S - 336-00 Linde E35 - 387-00 Linde E35 L - 1252-01 Linde E35 RL - 387-00 Daewoo B25X Still R60-25 Still RX60-30 Still RX60-35 Still RX60-40 Toyota 7FBMF20/25 Toyota 8FBMT25 Toyota 8FBMT35 Carer Z25HD Carer Z25KN Caterpillar EP30K Caterpillar ЕР30KРAC Daewoo B22/35 X-5 Daewoo B30 Daewoo B35 X Doosan B32X Doosan B35X-5 Hyster E2.50XM Other common battery sizes available on request. Shipping available.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,027 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - Special tray 2 + 1 year warranty Iisdpfx Apey Rnrpscjg + incl. aquamatic system + incl. end conductor & REMA 320 plug (other plug types can be fitted on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,027 mm Width 708 mm Height 784 mm Weight: approx. 1,270 kg Suitable for the following models and others: Toyota 8FBMKT25 Atlet BALANCE Atlet EH 25 Baumann EX 25-40 Caterpillar EP25K PAC Charlatte T135 Charlatte T165 Charlatte T20 Doosan B30NS Hyster E2.0-3.2XM TCM FHB20-E1 TCM FHB25 Common battery sizes available—please enquire. Transport possible.