Used Coil Joining Arc Welding Machine for sale (67,013)

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Nodpfx Aovvkfdemyold

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Nodpfx Amsvvkfweysld Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Nsdpfxjxyiile Amysld

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current (min.): 25 A, welding current (max.): 450 A, Second-hand Röwac PU450 Double Pulse MIG Nsdpfx Amszkfr Rjyjld Refurbished, tested, serviced and ready for immediate use 3 Months Warranty Specifications: 25-450 AMP 400 Volt Pulse / Double Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Gas pre flow / Gas post flow Start current / End current Fixed programs / Program memory Elektrode option Including: 4 Meter Welding torch, earth cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. Nledeyy S Uaepfx Amyjd The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Nlodpferdf Acjx Amyed Tool water cooling

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: GN2.372.44.32, Schlatter roll seam welding machine, type no. GN2.372.44.32 Nsdsy U Uz Sepfx Amyold Very well-maintained machine in good working order, with product cooling and extraction system. Complete documentation is available. See the photo of the type plate for all details. For more information, please contact Theo Ligtenberg.

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Nedpfx Aov R Nk Uomyeld Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 345 mm, total width: 219 mm, total length: 568 mm, input voltage: 400 V, ground cable length: 1,000 mm, overall weight: 23 kg, type of cooling: air, electrical fuse: 16 A, welding power (max.): 12 kVA, open-circuit voltage: 50 V, welding current at 60% duty cycle: 220 A, welding current at 100% duty cycle: 180 A, space requirement height: 500 mm, space requirement width: 400 mm, space requirement length: 700 mm, input current: 16 A, continuous power (apparent): 8 kVA, Manufacturer Miller Model STi 270 Main Category Welding Equipment Machine Name / Vehicle Type Industrial Welding Machine Condition Used Functionality Fully Functional Nodpjy Uxwqsfx Amyjld Inspection Under Power Yes Description Miller STi 270 industrial welding machine for sale. The unit is fully functional and suitable for professional welding applications. Supports both MMA and TIG welding processes. Compact and durable construction designed for workshop and industrial use. Technical Specifications Input Power 400 V, 16 A, 3-phase, 50/60 Hz MMA Adjustment Range 5–270 A, 20–30.8 V TIG Adjustment Range 5–270 A, 10–20.8 V Duty Cycle at 40% 270 A Duty Cycle at 100% 180 A Open Circuit Voltage 50 VDC (12 VDC)* Welding Processes MMA, TIG Dimensions (H x W x D) 345 × 219 × 568 mm Weight 23.2 kg Features VDR Lift-Arc Hot-Start Arc-Force

Condition: ready for operation (used), Merkle W 420 AC/DC TIG Insquare welding machine / welding system Nljdpfxsu Hg Aqo Amyod Technical data can be found in image no. 2 You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid is available. Sale subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: ready for operation (used), Migatronic MTE 440 WIG AC/DC welding machine for steel and aluminum. Water cooling system: Migatronic CTU 3000. The maximum welding current is 440 A. Inspected by EWM Service. You are welcome to visit us for an inspection. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Nlodpfx Ameh Ib Idoyed Subject to prior sale. If you have any questions, please do not hesitate to contact us by phone. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change. Shipping is exclusively to business customers; for private consumers, only collection is possible.

Condition: ready for operation (used), Global HS-8307 Hot air welding machine Automatic strip cutter Nljdpfxsvaxfae Amyod You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Nlodpfx Amozd Rmgjysd Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SWM001, type of input current: DC, nominal power at 50% duty cycle: 37 kVA, input voltage: 380 V, type of cooling: water, overall weight: 230 kg, warranty duration: 24 months, welding power (max.): 75 kVA, total width: 500 mm, total height: 1,620 mm, total length: 950 mm, Spot welder / welding machine with water cooling – 75KVA – adjustable power, resistance, etc., + spare tips Nlodpsyl Sy Esfx Amyod

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1,500 kW (2,039.43 HP), total height: 1,055 mm, overall weight: 235 kg, Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, weld cleaning, and energy storage welding — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types and multiple types of weld clean. You can give our managers a call for additional details! Nlodpfxorztrmj Amysd Wattsan 5in1 G2 Pro characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1,500 kW (2,039.43 HP), Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, and weld cleaning — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types. Njdpjrztdrofx Amyjld You can give our managers a call for additional details! Wattsan 4in1 G2 characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, functionality: fully functional, Year of construction: 2026, power: 1,500 kW (2,039.43 HP), overall weight: 235 kg, Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, and weld cleaning — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 1 mirror and 1 seam type. Nljdpfxeiichhs Amysd You can give our managers a call for additional details! Wattsan Welding machine characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, – Capacity: 8 kVA – Timer Nsdpfjvbr Dlox Amyeld – 380 V

Condition: like new (used), Water-cooled chiller with refrigeration compressor Type eChilly 5-5 Manufacturer: HYFRA (DALEX) Nodjzg Tqtepfx Amyold Cooling capacity at 20 °C water temperature: 5.5 kW Dimensions L/W/H in mm: 770 / 765 / 515 Weight: 90 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Water-cooled, pneumatically operated spot welding tongs Nimak L123 Very good used condition, fully functional. Nedpfx Aoxmuyvsmysld Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Nsdpfxjxmuyps Amysld

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, Laser welding machine with 200 watts of laser power - lamp-pumped - spot welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - weld spot from 0.1 to 3 mm - for virtually all metals (steel, stainless steel, silver, gold, titanium, etc.) - incl. optical microscope (10x) - additionally CCD microscope with crosshair - current, pulse width, repetition rate, and frequency adjustable on the control panel - incl. protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - external cooling - power connection 230 volts / 32 amps Please also note our favorable leasing/rent-to-own offers. Machine dimensions approx.: Width: 60 cm Nljdpfx Aoflrniemyjd Height: 120 cm Depth: 110 cm Weight: approx. 150 kg

Condition: excellent (used), Water-cooled chiller with refrigeration compressor Manufacturer: HYFRA (DALEX) Cooling capacity: 6.9 kW at a water temperature of 20°C Compressor power: 3.4 kW Dimensions (L/W/H) in mm: 715 / 715 / 1375 Weight: 190 kg Nljdpfxezg Nhbo Amysd

Condition: used, Year of construction: 2015, Offer 26163 Technical data (approximate): - Maximum workpiece diameter: 80 mm - Overhang: 70 mm - Welding torch stand adjustable in X, Y, and Z - Stand travel via handwheel: 500 mm - Stand overhang: 70 mm - Distance between centers: 600 mm - Tailstock with pneumatic pressure spindle - 3-jaw chuck: 100 mm - Hand-held remote control - Connection cable - Pneumatic connection - Table frame: W 2000 x H 850 x D 700 mm Nodpfx Amszg A Rijyjld - Footprint (approximate): W 1150 x H 650 x D 500 mm - Weight (approximate): 200 kg

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage 400V Rated power 60 kVA at 50% duty cycle Short-circuit current 22 kA Welding current 17.6 kA Fuse rating 125A Outreach 420mm Electrode force 470 daN Cylinder with pre-stroke Total stroke 80mm Double stroke 60mm Electrode cone MK2 Welding control TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV standards - all pneumatic and water hoses replaced - electrode holder new Nodpfxeh N Sd Us Amyeld - original documentation / operating manual available - machine inspection with confirmation 07/2026 - weight approx. 330 kg Demonstration and inspection by appointment. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 highway. And we also always have a suitable cooling unit in stock – of course, for an additional charge ;-)