Used Chauvin Vibro Sieve for sale (408)

Condition: used, Year of construction: 2017, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, Colour: Grey - Details: - └ Description: Excluding magnet - Year: 2017 - Documentation available: No - CE certificate present: No - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 - Sieve perforation [mm]: 15 Crsdex Dik Rspfx Albsg - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, driver cabin: other, gearing type: other, Vehicle location: en route / in transit Design: self-priming water pump, self-lubricating with separate motor, dirty water pump, motor KD350 C5, air-cooled, max. flow rate 1800 liters/min (108 m³/h), pump head 17 m, protection class IP 23, self-priming, impeller made of graphite cast iron, spiral made of graphite, mechanical seal silicon carbide, centrifugal pump for supplying and draining, conveying highly contaminated media up to 20 mm particle size, standard equipment: sieve, screw connections, clamps, operating and maintenance manual, weight 90 kg Technical data: Crsdpfx Aoi Rqr Tjlbog Max. flow rate: 1800 l/min (108 m³/h) Max. suction height in m: 8 Suction diameter (mm): 100 Discharge diameter (mm): 100 Particle size (mm): 20 Self-priming: yes Weight approx. kg: 90 Dimensions L x W x H in mm: 715 x 570 x 590 Motor type: 1-cylinder, 4-stroke S.V. Motor: KOHLER KD350 C5 Autonomy (h): 4.3 Fuel: Diesel Tank capacity (liters): 4.3 Starting system: Recoil starter Price varies depending on size! Suitable for water tank, see -6112-, -6113-. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, color: other, Field of application: Mining We produce, mobile, primary, primary - secondary or tertiary, impact - crushers. On a trailer, with a hopper, belts, grizzly or wooble feeder, to separate clay and earth from the rock. It can also be a combination of crushers + screen, sieve, with two, three or four deck_ DRY PROCEDURE or WET PROCEDURE. The final products are tampons: 0-30 mm, 0-60 mm or 0-100 mm or asphalt-construction fractions; 0/4, 4/8, 8/11, 11/16, 8, / 16, 16/22, 16/32 mm. The plant is used for work in soft and medium hard rock. Technology has advanced, today they can crush impact crushers even in difficult working conditions. On a tertiary impact crusher in difficult working conditions, the impact hammers can be pre-shredded up to 40,000 m3 of gravel or eruptive stone. The power supply of the plant is via a cable, from a transformer station or via a generator. The size of the plant will depend on the project inquiry . ----- ----- ----- Mining crushing plants are offered, on a trailer; jaw crushers, cone crushers, vertical crushers, all types of separations, DRY PROCEDURE and WET PROCEDURE, with washing. ----- ----- ----- Cjdpfx Aljx D Dcbobsrg The warranty on the plants is 2 years. We provide service, all spare parts. ----- We offer all technical support on the issue of how correct and economically justified work out some quarry !! Many years of professional experience in surface exploitation in quarries, open pit, of mineral resources.

Condition: used, Year of construction: 2010, total length: 1,750 mm, total height: 1,660 mm, total width: 1,500 mm, Colour: White Empty weight: 1.200 kg - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 0509 - Main motor power [kW]: 18.5 - Rotor width [mm]: 630 - Number of shafts [pcs.]: 1 - Opening width [mm]: 810 - Opening length [mm]: 630 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 28 - Transport dimensions: 1750mm x 1500mm x 1660mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cedpexixitefx Albjrg Yorick Diebels

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Crodpfx Aszxqhyolbog Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 1990, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 11584/90 - Main motor power [kW]: 11 - Hydraulic unit power [kW]: 1.1 - Number of shafts [pcs.]: 1 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 25 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Crjdswmbcyepfx Albsg Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, total length: 6,450 mm, total height: 2,200 mm, total width: 2,200 mm, Komplett mit Förderband und Magnet Cjdpfx Aoww T U Njlbsrg - Year: 1991 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 45 - Rotation speed [rpm]: 982 - Hydraulic unit power [kW]: 7.5 - Oil tank capacity [L]: 110 - Rotor width [mm]: 1000 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 2300 - Opening width [mm]: 2500 - Opening length [mm]: 3200 - Sieve perforation [mm]: 200 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 6450mm x 2200mm x 2200mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 3,100 mm, total height: 1,550 mm, total width: 1,850 mm, Colour: Grey Empty weight: 5.000 kg - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 Codpfx Alewf U Aqeborg - Rotation speed [rpm]: 1470 - Hydraulic unit power [kW]: 3.4 - Oil tank capacity [L]: 75 - Rotor width [mm]: 1150 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 2580 - Opening length [mm]: 2180 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 63 +/- - Transport dimensions: 3100mm x 1850mm x 1550mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Units available in stock! Power 18.5kW Power supply 380V 50Hz Shredding area size 600x595mm Revolutions 98RPM Length 2085mm Width 1248mm Height 1495mm Weight 1550kg VVS-600 is the smallest member of our VVS family of shredders. Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable particles which is easier to store, transport and sell. Our VVS-600 provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: - Assists the rotor by pushing the material to provide maximum working area efficiency. - Is controlled by an algorithm to ensure safety and efficiency - Gimbal-mounted hydraulics provide a high lifetime - Enclosed hydraulics to reduce noise, vibrations and increase safety Drivetrain: - The drivetrain is protected against hits from foreign objects by using a twin-disengagement system which is easily resettable and serviceable. - Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor: Codpfxefpa Awj Albjrg - The centrepiece of the rotor is milled from a single block of high-grade steel. - In case of severe damage to the rotor or its shafts due to a foreign object, the latter can be replaced without the need to replace the whole unit – costs saved for the user! - Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. - 4-sided rotatable blades – a single blade will last you 4 times as long. - Counter blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output: - Output volume and particle size is controlled by an interchangeable sieve screen which is adapted based on the material used. - The shredded material can be transported out of the machine by using different types of transporters, including air, belt and screw conveyors. Affordable pricing, proven reliability, easy maintenance, warranty, quick service and parts delivery – these are just a couple of reasons to choose our VVS series of shredders.

Condition: new, Year of construction: 2024, he shredder is designed for shredding straw or hay pressed in rolls. In certain cases, after obtaining the manufacturer’s permit or testing, it is possible to shred square or rectangular pressed bundles. Required fraction of the shredded product at the output is possible after selecting a sieve of a certain throughput from the range offered by the manufacturer. In case product fractions of a smaller size are needed, insert a finer sieve, and vice versa. Csdpfx Aotnfuzslbjrg Technical Data of Shredder Capacity: 500 – 1200 kg/h Shredding fraction: 10 – 35 mm Humidity of raw material:

Condition: new, Year of construction: 2025, A high volume shredder for long pieces of material. Boards and cuts are fed into the machine via a horizontal vibratory conveyor and multiple feeding rotors. The high speed shredder makes quick work of extra long pieces when shredding them against replaceable blades, blade holders, sieves and counterblades. Allows to shred pieces up to 170mm height, 510mm width. Material is extracted with an included main auger to the side/rear of the machine. Includes electrical cabinet with full load monitoring. Material is suitable to sell as chips, or further processed with a hammer mill. Specifications: Throughput: Up to 13m3/h, ~2225kg/h* Main motor: 37/45kW Speed: ~500RPM Blades: 38 units. Blade size: 40x40 for softwood, 35x35 for hardwoods. Length: 2100mm Width: 1550mm Height: 1350mm Weight: 3500kg Screen: D20 / 35x35 Warranty: 2 years / 1 000 workhours Cjdpetnfrlofx Albjrg

Condition: new, Year of construction: 2025, Wood chips are a common by-product generated by woodworking companies during the manufacturing process. Due to low options for realization wood chips are usually discarded by selling it to heating plants for a low price. Our MM-2000 hammer mill allows companies to turn wood chips into briquettable sawdust by shredding and crushing it through metal screens also known as sieves. Quick-release hatches allow quick and easy access for maintenance while keeping workers safe. Blades of the machine are not fixed and spin freely due to the centrifugal principle. This means that blades take less damage on impact and have an extended lifetime. Fixed blades can be ordered if required for specific produce. The mill can be ordered to fit various produce and applications ranging from reducing biomass waste to spice production, chemical and mineral. The perforated sieves and blades are easily interchangeable to adjust for different types of materials and purposes. Crjdpfxjfh R I Ae Albjg Free test-mill of material is available on demand. Capacity depends on material Dimensions 1765x960x1060mm. Weight 996 kg. Power 30/37/45kW, 50Hz, 380V.

Condition: used, maximum load weight: 29,280 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 13,260 mm, loading space width: 2,480 mm, loading space height: 2,945 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, SCHWARZMÜLLER 3-axle SANH Mega-Curtainsider with a 2-piece tail lift First registration 10/2024 Permissible total weight, technically: 39,000 kg Unladen weight: 9,720 kg Internal length: 13,600 mm Internal width: 2,480 mm Internal height, front: 2,895 mm, rear: 2,945 mm, adjustable Fifth wheel height: 960 to 1,050 mm Chassis with frame reinforcements for increased point load of 20 tons over 5 m. Hole-type outer frame 22 pairs of recessed lashing eyes, 4 tons 10 pairs of recessed lashing eyes, 5 tons Sieve-printed plywood floor 27 mm + top layer of birch 12 mm, laid transversely, floor load capacity 7,200 kg, forklift axle load, rear bolted steel tear-resistant wear plate 5/7 mm Reinforced aluminum front wall, 2,550 mm high, inner front wall protection made of 9 mm sieve-printed plywood Curtain rail at the front corner posts with tensioning ratchet, curtain can also be opened and tensioned from the front Rear portal can be widened by 490 mm on each side 3 pairs of reinforced center posts, 5 rows of slat pockets 4 rows of aluminum slats, 100 mm EDSCHA sliding cover with steel scissors, can be moved forward AND backward Manually hydraulic lift roof on both sides, can be raised by 400 mm Sliding curtain, Code XL INFLATABLE AIRBAG SYSTEM in the trailer roof SAF axles, disc brakes, IntradiscPlus integral Axle spacing: 1,310 + 1,410 mm 1st axle: lift axle 3rd axle: trailing steering Tires: 6 x 435/50 R 19.5 Goodyear WABCO trailer EBS with anti-roll protection RSS Spring brake parking brake on 2 axles Air suspension with lifting and lowering device, extra-long lifting bellows with a total lift of 250 mm Crjdpfxszxkuao Albeg Axle load display via CAN bus Tire pressure monitoring Lighting: full LED 2 stainless steel toolboxes on the left, 1,000 x 500 x 500 mm 2-piece tail lift, Dhollandia type DH-AR41 Load capacity: 16,000 kg Reinforced for 3-wheel vehicles Reinforced steel platform, divided approximately 5,000 mm (approximately 3,100 mm + 1,900 mm) in a closed, reinforced design (AR/AR2 5 tons point load) Steel platform galvanized with "polyurethane floor coating" (V4 non-slip and abrasion-resistant continuous floor with Mandurax and sealant) Lifting mechanism hot-dip galvanized Hydr. 10-ton support in the area of the trailer end, manual external control Automatic mechanical tilt CE design Additional mechanical platform locking Plug-in stop for the ramp at the rear left and right, including housing in the outer frame RENTING is the new BUYING, with us also available immediately in FULL-SERVICE RENTAL -----

Condition: new, Year of construction: 2027, TALC POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Powdering unit : L450 W450 H1500mm Filtration unit : L750 W750 H1825mm Both units are connected to each other with Ø80mm air hose and clamp system CABLE PASSAGE Size : 100 mm diameter Height from ground : Manually adjustable, from 1.000 mm to 1100mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application • Cable passage height from the ground adjustable, according to your extrusion line • Coating and filtration unit can be combined or separately Cedpfx Alovxfg Isbsrg

Condition: new, Year of construction: 2027, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE Cedpfxsvv Rfko Alborg The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2027, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye Credpfx Ajvv H Hdslbjg CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle Cjdpfx Alovzx Auobsrg when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: good (used), functionality: fully functional, empty load weight: 7,900 kg, maximum load weight: 30,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2007, loading space length: 10,000 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, loading space volume: 60 m³, suspension: air, tire size: 385.65 r 22.5, color: silver, Year of construction: 2007, Equipment: ABS, Smr 60m3 aluminum tecnokar tank tipper, rear with sealed overhead door, front vibro motor, 3 disc axles with 1st liftable and steerable, hydraulic couplings, uncover cover with manual handling cloth, stainless steel box, air suspension, year 2007, overhauled until 30.11.2024-CONCESSIONARY INTERDRRIVE SRL-PARMA Crjdpfetpm Tmex Albog

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Cjdpshbdg Uofx Alborg • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 7011036, Format (cm): 92 Equipment / Additional information: Side table, air table, safety barriers, 1xreserve knife Cedpfjzw Axhsx Alberg VIBRO TABLE POLAR RB2 (Ref. No.: 39004.26) M. No.: 5881212 // Age: 1988

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  - Brewhouse (Brewiks 500, 2018) - Capacity: 5 HL - Heating: Electric, 36 kW - Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) - 6 CCTs × 12 HL useful capacity - Pressure rating: 3 bar - CIP Stations (Svoboda CIP 100) - 2 mobile CIP units - Tank capacity: 100 L (alkaline + acid) - Canning Line (Wild Goose GOSLING, 2021) - Semi-automatic - Formats: 0.33 L / 0.44 L / 0.50 L - Cooling (Quantor Chilly MAX 50L) - Glycol chiller for CCTs - General Key Information - Power supply (various units): 230–400V, 50 Hz - Applications: Brewing, fermentation, can filling Crjdpsyb R Iaofx Albjg Scope of Delivery  - Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) - Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity - Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used - Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L - Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L - Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer - Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing - Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank - Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min - Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) - Water tank | ROTH | — | — | 2× 750 L - Malt mill | Sommer | Maltman 220 | — | Precision mill - Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis

Condition: used, Year of construction: 2000, Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Codpfx Asvm D Umelbsrg Technical Details  - Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) - Formats: - crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise - crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise - crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise - crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise - Horizontal and vertical spray nozzles - Spraying with hot caustic and fresh water - Caustic heater with temperature regulation is integrated in the machine - Machine is heated by steam - Dimensions: - Length: 4800mm - Width: 900mm - Height: 1400mm - Weight: 1800kg - Sieves for removal of dirt - Incl. documentation - Incl. spare parts list - Incl. Electrical diagram

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm Crsdpszwwpbofx Albeg - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), functionality: fully functional, hopper 150x100 cm hydraulic pressure drawer year of manufacture 1996 Cedpfjzx St Rjx Albsrg control from operator panel sieve 1.5 cm CE marking

Condition: excellent (used), Separator screen, slotted screen basket, slotted screen baskets, replacement basket, replacement baskets, separator basket, separator slotted screen, separator filter grid, separator grid, separator screen for slurry separator, round screen, slotted screen Cjdpfxewx E Taj Albsrg -Slotted sieve: Separator sieve -Inner diameter: 129 mm -Dimensions: Ø 136 x 800 mm -Weight: 3.8 kg