Tanker truck
- Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 17 - Preis je nach Größe

Condition

New

Location

Bovenden

Tanker truck - Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 17 - Preis je nach Größe

- Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 17 - Preis je nach Größe

Basic data

Machine type:: Tanker truck

Model:: - Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 17 - Preis je nach Größe

Condition:: new

Price & Location

Seller location:: Alte Bundesstraße 48, 37120 Bovenden, Germany

Call

Technical details

Motor and gearbox

Gearing type:

other

Further details

Driver cabin:

other

Details about the offer

Listing ID:: A8271326

Reference number:: 2907

Update:: 07.09.2026

Description

Vehicle location: en route / in transit
Design: self-priming water pump, self-lubricating with separate motor, dirty water pump, motor KD350 C5, air-cooled, max. flow rate 1800 liters/min (108 m³/h), pump head 17 m, protection class IP 23, self-priming, impeller made of graphite cast iron, spiral made of graphite, mechanical seal silicon carbide, centrifugal pump for supplying and draining, conveying highly contaminated media up to 20 mm particle size, standard equipment: sieve, screw connections, clamps, operating and maintenance manual, weight 90 kg

Technical data:
Max. flow rate: 1800 l/min (108 m³/h)
Max. suction height in m: 8
Suction diameter (mm): 100
Discharge diameter (mm): 100
Particle size (mm): 20
Self-priming: yes
Weight approx. kg: 90
Dimensions L x W x H in mm: 715 x 570 x 590
Rcsdpfxoi Rqr To Apdeh
Motor type: 1-cylinder, 4-stroke S.V.
Motor: KOHLER KD350 C5
Autonomy (h): 4.3
Fuel: Diesel
Tank capacity (liters): 4.3
Starting system: Recoil starter
Price varies depending on size! Suitable for water tank, see -6112-, -6113-. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2002

2,506 listings online

Call

Send inquiry

Telephone & Fax

+49 551 8... show

Fax:

Add to watchlist

Share Report listing

These listings may also fit your interest.

Listing

E-welding device, stick electrode welding machine, electric welding power source ESAB LTG 250

Hessisch Lichtenau

18,422 km

E-welding device, stick electrode welding machine, electric welding power source
ESABLTG 250

€380

Fixed price plus VAT

Call

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Rcjdsd N E Rvopfx Apdsh Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

See details

Listing

Living container, office container, WC container Container Containeranlage Bürocontainer WC+Dusche

Teutschenthal

18,289 km

Living container, office container, WC container
Container ContaineranlageBürocontainer WC+Dusche

Call

Condition: good (used), Equipment: bathroom, shower, Used container system, dry, watertight, in good condition. The system has already been disassembled and is ready for collection. Manufacturer: BICOBA Year of manufacture: 2009 - Consisting of 10 x 20ft containers with toilet and shower - Container area = approx. 150m² - Layout see sketch Dimensions per container: Length: 6.00m Width: 2.45m External height: 2.90m Internal height: 2.50m Equipment: - Plastic windows with insulated glazing and tilt/turn function - Blinds - PVC flooring (must be machine cleaned) - Water heater was connected to the building - Wall panelling - Ceiling panelling - Container lockers - Awnings on the front and side - Weather protection sheets for the roof Rsdpoz Rmtbsfx Apdoch - 3 showers - 3 sinks - 2 toilets with cabin system - 2 urinals - Documents available Insulation: Wall: 100mm Floor: 100mm Roof: 100mm - Signs of wear on the flooring Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, including the following information: name, email address, and telephone number.

See details

Listing

Oberleichtersbach

18,481 km

Screening plant
McCloskeyR-105

Call

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,000 h, machine/vehicle number: 66642, Coarse material screening plant 6 m³ feed hopper with steel plate belt feeder CAT C4.4 (3054) with 75 kW Double-deck screen box: 3,660 x 1,370 mm Rsdpfsznl Hisx Apdjch Feed capacity: up to 300 t/h Transport weight: approx. 23,000 kg including various spare screen decks

See details

Listing

WIG and Electro DC welding machine, WIG welding machine, E-welding machine also for stick electrodes DALEX GL/W 201

Hessisch Lichtenau

18,422 km

WIG and Electro DC welding machine, WIG welding machine, E-welding machine also for stick electrodes
DALEXGL/W 201

€750

Fixed price plus VAT

Call

Condition: used, Wig welding machine, DALEX, type GL/W 201 WIG welding machine Machine no.: 201, year of manufacture approx. 1995 Power: 200 amps, 35% duty cycle 160 amps, 60% duty cycle 120 amps, 100% duty cycle Adjustment range: stepless Type of current: DC - direct current Mains connection: 400 volts, 50 Hz, 5.9 kVA, 32 amp plug - 2-cycle and 4-cycle welding system - WIG hose set, 8 meters Redpfxoi E Izvo Apdsch - HF ignition - Shielding gas pressure regulator - Electrode welding for coated electrodes - Fan cooling - Connection socket for foot switch (without foot switch) Space required L x W x H: 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise, the machine is in very good condition.

See details

Listing

Mowing machine Bergmann Mähraupe M 201 mit Zubehör

Hagelstadt

18,412 km

Mowing machine
BergmannMähraupe M 201 mit Zubehör

€69,500

Fixed price plus VAT

Call

Condition: used, Year of construction: 2023, rear tire size: 0%, We are offering for sale one used Bergmann M 201 crawler from year 2023 with approximately 155 operating hours. Rcodpfx Apeyq Aw Ssdoh Equipment: radio-controlled crawler, payload 500 kg, unladen weight 1200 kg, lifting capacity 6000 N, height 1287 mm, length 2087 mm, width 1350 mm, rubber tracks 2800 mm wide, angled tread for slope stability, self-cleaning feature, water-cooled 3-cylinder Hatz diesel engine, output 42 kW at 2800 rpm, radiator fan with reversible drive for self-cleaning, hydrostatic travel drive, 0-8.5 km/h. 12V system, LED headlights, hydraulic multi-coupler, one high-performance hydraulic circuit up to 85 L/min, two auxiliary hydraulic circuits up to 10 L/min each, including Müthing mulcher with a working width of 1.40 m, including Seppi mulcher for processing brush and wood up to a diameter of 15 cm. Further details available on request. Location: 93095 Hagelstadt.

See details

Listing

Kompressor / Compressor Gardner Denver KTA100-1C

Emskirchen

18,467 km

Kompressor / Compressor
Gardner DenverKTA100-1C

Call

Listing

Mobile crushing and screening plant Vidts machinery

Pajottegem

18,738 km

Mobile crushing and screening plant
Vidts machinery

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, For sale: Rcodpfxjzcm I Ss Apdsh Semi-mobile crushing and screening plant consisting of: - Hopper - Star screen 0/60 - Binder Bivitec screen 4000/1600 - Percussion crusher 1000/500 - Magnet - Generator set 500 kVA This machine was designed and manufactured by us here in Belgium and is of very professional quality. It is completely self-sufficient and can even power other components. It is capable of separating soil into fractions of 0/20 and crushing debris into the desired size in a single operation. The complete plant has been thoroughly inspected and put in order for sale. Ready for immediate use. Price on request and negotiable. For further questions, please do not hesitate to contact us.

See details

Listing

Enschede

18,485 km

Profit cutting machine
AYEL-TECHM36

Call

Listing

Lathe-conventional-electronic BERNARDO SMART 410-1000 PRO

Ahaus

18,488 km

Lathe-conventional-electronic
BERNARDOSMART 410-1000 PRO

Call

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1220 kg range L-W-H 2070 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points Rcodpjxaavvjfx Apdjh - Chip back wall - Operating tools - Operating instructions

See details

Listing

Eilenburg

18,239 km

Flatbed truck
STEYR12 M18/4x4 Pritsche

€19,840

Fixed price VAT not applicable

Call

Condition: used, mileage: 158,032 km, power: 130 kW (176.75 HP), first registration: 04/1987, fuel type: diesel, overall weight: 11,500 kg, axle configuration: 2 axles, color: brown, gearing type: mechanical, Equipment: all wheel drive, Errors and prior sale excepted! Internal number: 0633.2MY2407 ---- EQUIPMENT Frame for tarpaulin Flatbed All-wheel drive ... and more ---- The vehicle has not been refurbished! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Rcodpfxoh Udyds Apdjh Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

See details

Advertise here