Used Blending And Carbonisation Plant for sale (8,878)

Condition: good (used), Year of construction: 2015, total width: 1,700 mm, total length: 4,700 mm, total height: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this Novatec PLURITANK 550 ultrasonic cleaning system in good condition, manufactured in 2015. 1) Overall dimensions of the system: 4700 x 1700 x 1500 (h) mm 2) Total installed electrical power: 53 kW Itjdezy R Rkspfx Ahben 3) Supply voltage: 400V - 3 phases + N + PE - 0 Hz 4) Dimensions of the tanks: • Tank 1: “Ultrasonic cleaning tank in hot aqueous detergent solution”  1450 x 1150 x 1500 (h) mm (capacity 620 L) • Tank 2: “Hot hydrokinetic rinsing tank for immersion in tap water with passivating agent”  1200 x 1150 x 1500 (h) mm (capacity 580 L) • Tank 3: “Hot air recirculation drying oven”  1200 x 1150 x 1500 (h) mm (capacity 580 L). If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Isdpfx Ajzvddcjhbjtn

Condition: used, functionality: fully functional, Double-deck sieve, 1,300 x 4,000 mm OD: 60x60 mm; UD: 15x15 mm Equipped with discharge chute, electric drive, and control cabinet Itodpfsz Az I Sox Ahbon Mobile unit on a single-axle trailer With discharge conveyor and discharge hopper

Condition: reconditioned (used), overall weight: 40,000 kg, We are offering this refurbished ASTEC SIX PACK mobile asphalt mixing plant. If you have any questions or require further information, please do not hesitate to send us a message or call us. Itsdpfx Ahozz Ru Sobon

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor, badge_tracstrap Equipment: - Perforated sheet metal floor - Shovel rack - TracStrap securing system Net price: €6,743.70 / Gross price: €8,025.00 Article number: DPT235371700.22 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 370 x 170 x 20 cm • External dimensions (LxWxH): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 781 kg • Payload: 2,719 kg • Chassis: Low loader (wheels next to the superstructure) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor, internally on the sides • Screen-printed wooden floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel individual ramps, steel galvanized, adjustable, L=1.62m • Stable ACME locking system: closes silently, loading ramps are held in place by safety locking fasteners, rubber buffer dampens noise • Very low chassis for low approach angle • Excavator bucket rack • 10x lashing points on the side wall (1000dAN/kg), TÜV certified • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form a basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Free choice of lashing points when lashing in the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side wall • Reversing automatic system • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED position lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any desired features! _____ - Financing or leasing possible Isdpozy A Arofx Ahbetn - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated steel floor, badge_tracstrap Features: - Perforated steel floor - Shovel rack - TracStrap securing system Isdpfx Ahjzy A A Sebetn Net price: €6,802.52 / Gross price: €8,095.00 Article number: DPT235321700.23 Technical specifications: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 320 x 170 x 20 cm • External dimensions (L x W x H): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 781 kg • Payload: 2,719 kg • Chassis: Low-loader (wheels next to the superstructure) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel mudguards with non-slip perforated profile • Reinforced perforated steel floor, internally on the sides • Screen-printed plywood floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel rack • 10x lashing points on the side wall (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing down in the perforated steel floor • TracStrap Kit (Heavy-Duty), TÜV certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form the basis for positive load securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side wall • Reverse drive automatic • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, durable and reliable. • LED position lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop - for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor, badge_tracstrap Equipment: - TracStrap securing system - Perforated sheet metal floor - Shovel rack Net price: €6,449.58 / Gross price: €7,675.00 Article number: DPT235321700.22 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 320 x 170 x 20 cm • External dimensions (L x W x H): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 736 kg • Payload: 2,764 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle Isdpfjzy Dq Rjx Ahbetn • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wood floor in the middle, 18 mm thick, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel ramps, steel galvanized, adjustable, L = 1.62 m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator bucket rack • 10 x lashing eyes on the side panel (1000 dAN/kg), TÜV certified • Free choice of lashing points when lashing down on the perforated steel floor • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form the basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse automatic braking system • ALKO overrunning device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, durable and reliable. • LED rear marker lights • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis guarantee _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary transport license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Itsdpfxozxqd Is Ahbon Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 38,800 kg, Year of construction: 2023, operating hours: 1,707 h, Conveyor belts: hydraulically foldable Engine type / engine power: C4.4 Tier 4 Final / 102 kW Transport weight: approx. 38,800 kg Engine manufacturer: Caterpillar Transport dimensions: 18,500 x 3,200 x 3,400 mm (L x W x H) Volume of feed hopper: 10 m³ Grizzly screen: hydraulically foldable with remote control Screen area, lower deck: 5,490 x 1,524 mm Screen area, upper and middle decks: 6,100 x 1,524 mm Screening plant type: classifying screen with three screen decks Throughput: up to 600 t/h (application-dependent) Itedjzxq N Ropfx Ahbon

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Iodpfx Ajzxwypehbstn Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, used dividing system used dividing system consisting of: infeed system Manufacturer: Systraplan Year of manufacture: 1989 Technical data - Siemens S5 control system - Portal infeed system with suction crossbeam - 1 stacking station - 2 stacking stations for collecting protective sheets - Buffer roller conveyor before the infeed system - 1 additional buffer station Dividing saw Manufacturer: Anthon Type: LNB-LNB150 63/33 22 Year of manufacture: 1994 Technical data - Siemens S5 control system - Package height: max. 150 mm Itsdpfxezuzigo Ahbon - Saw carriage with scoring saw and main saw Paternoster with 2 levels Type: MRB-HUBKORB-EHK-3 Technical data - For collecting identical packs of strips for optimal utilization of the cross-cut saw Destacking Liftomat Manufacturer: Holzma Type: HAU A 25/8, HAU B 25/8, HAU A 25/12, HAU B 25/12 Year of manufacture: 2004 Technical data - 4 storage spaces with roller conveyor lifting station (Liftomat) - Pit required - Buffer roller conveyor after destacking Waste disposal system consisting of a cut-off machine and a shredder Cut-off machine Manufacturer: Holzma Type: Cut-off machine Year of manufacture: 1996 Shredder Manufacturer: Masur Type: LZ 800 Year of manufacture: 2003 Technical data - Cut-off machine for longitudinal sections - Conveyor belts and consolidation of longitudinal and cross-cut sections - Horizontal shredder Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser Ijdpfez E A Rwox Ahbotn The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Itodpfez Ehgwox Ahbjn Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 SALE PRICE - 4400 EUR + VAT RENTAL PRICE - 160 EUR + VAT

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2000, Empty weight: 4.760 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm Itedpjzi Dnhsfx Ahbsn We have the possibility to stack trailers!

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,000 h, machine/vehicle number: 66642, Coarse material screening plant Iodeznl Hijpfx Ahbotn 6 m³ feed hopper with steel plate belt feeder CAT C4.4 (3054) with 75 kW Double-deck screen box: 3,660 x 1,370 mm Feed capacity: up to 300 t/h Transport weight: approx. 23,000 kg including various spare screen decks

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Pet food Charcoal Wood pellets Other dry bulk materials .... Itsdpfezrvldsx Ahbsn Bag dimensions: Width: 150 to 300 mm Length: 300 to 600 mm Side gusset: 35 to 85 mm The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Please feel free to contact us for additional information or to arrange a viewing.

Condition: used, functionality: unexamined, Year of construction: 1963, Used double-shaft hammer crusher KRUPP DHB 1604, feed opening approx. 1600 x 1480 mm, capacity up to 400-500 t/h, final grain size 0-30 mm, max. feed size 1000 x 800 x 500 mm. Particularly suitable for the cement industry, for processing moist materials such as limestone, clay, marl. Weight approx. 60 t. Iodpfx Ahjxcxrzobetn

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate Iodpeyt Emnsfx Ahbotn The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Isdpjyyzv Tsfx Ahbotn

Year of construction: 2026, condition: new, functionality: fully functional, power: 80 kW (108.77 HP), load capacity: 400 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity Ijdsyy Ricopfx Ahbotn • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: Power Line 300 T2, For sale: a high-quality, continuous/throughput industrial washing system manufactured by the German company LPW Reinigungssysteme GmbH, model Power Line 300 T2. The machine was built in 2018 and is complemented by an original MAHLE Filtersysteme extension/expansion from 2019. Iodpfxoz Atino Ahbstn

Condition: ready for operation (used), Year of construction: 2023, WP Miniroll compact roll line with high capacity and maximum flexibility. The Werner & Pfleiderer MiniRoll Roll Line is a highly compact and efficient solution for the production of premium-quality small bakery products. Thanks to the integrated Multimatic dividing technology and built-in drum round moulder, this line delivers consistent product quality, excellent hygiene and impressive output – all within a minimal footprint. year of build 2023 only 51 working hours! suited for the production of: • Long-rolled rolls • Round rolls  5-row configuration with 600 mm working width Integrated Multimatic Pro G 2 dividing head, up to 150 gram Dividing range from 55 g to 150 g, measuring piston 55 mm Hourly capacity pieces/hour 3000 Built-in dividing and rolling head Iedox Thvmjpfx Ahbetn Motorized weight adjustment for consistent product results Manual pressure adjustment for precise shaping control Adjustable moulding belt and length-forming unit with pressure plate Resting time of 6 minutes Suitable for trays 600×400, 600×800 and 580×980 mm Integrated storage for up to 3 rolling drums Automatic cleaning positioning Router for remote access

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Itodpsyuu Scofx Ahbon Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 74 h, machine/vehicle number: PC16 / P1551, Screw compactor and two 16 Cu Mtre closed skip units all manufactured to the highest specification by De Rooij in the Netherlands. All the equipment has been used inside a security shredding unit since new. It was decommissioned in 2023 and has only seen 74 hours of use since new. This equipment has been used by a bank for shredding currency and confidential wastes, and always situated inside a secure building. All in excellent condition and perfect working order. Isdjv Ilphepfx Ahbetn

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: Isdpfx Ajxlif Rohbstn - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!