Used Band Saw Machine 270Mm for sale (67,589)

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Ndjdpfoudi Uzox Ab Aec Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 8 h, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 360 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,940 mm, overall weight: 1,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, motor brake, PEGAS-GONDA 360x500 A-CNC-R | CNC AUTOMATED MACHINE | 33% SAVING AUTOMATIC MITER BANDSAW – DIRECTLY FROM THE MANUFACTURER! We are selling an automatic bandsaw PEGAS-GONDA 360x500 A-CNC-R directly from our showroom. The machine is designed for economical, automatic sawing of profiles, tubes, and solid materials. Automatic material feed and programmable control enable efficient series production. Demonstration machine from our showroom. For sale due to the replacement of our exhibition machines. SPECIAL PRICE – 33.3% SAVING! - New price: 34,398 EUR - Our price: 22,950 EUR plus VAT - You save 11,448 EUR! TECHNICAL DATA - Automatic hydraulic bandsaw - Cutting range 90°: round 360 mm - Rectangle 90°: 500 × 360 mm - Cutting range 45°: round 360 mm - Rectangle 45°: 440 × 240 mm - Cutting range 60°: round 300 mm - Rectangle 60°: 290 × 280 mm - Automatic miter cuts up to 45° right - Semi-automatic miter cuts up to 60° right - Saw band: 4780 × 34 × 1.1 mm - Band speed: 20–100 m/min - Main motor: 3.0 kW - Weight: approx. 1,500 kg - MITSUBISHI FX5U PLC control Nedo Aa Drxjpfx Ab Asdc - MITSUBISHI GT2104 color touchscreen - Automatic hydraulic material feed - Hydraulic material clamping - Programmable quantities and cutting lengths 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer will bear the travel and transport costs of the technician. Service rates: - Travel costs: 1 EUR/km (round trip) - Travel time: 25 EUR/hour - Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 22,950 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Available immediately! We offer transport, commissioning, and operator training for an additional fee at our service rates. ORIGINAL ACCESSORIES A wide range of PEGAS-GONDA original accessories is available (see accessories price list). We particularly recommend matching roller conveyors for efficient material handling. We will gladly prepare a quotation for a complete sawing station. YOUR ADVANTAGES: - Automatic material feed - Miter cuts up to 60° - MITSUBISHI PLC control - Directly from the manufacturer - 11,448 EUR price advantage - 6 months warranty - Original manufacturer service - Available immediately Contact us for more information or to arrange a visit! PEGAS-GONDA – directly from the manufacturer.

Condition: good (used), Year of construction: 2018, Used large-format band saw from Bomar Type: Topline 610 450 DGH Njdpfx As Aaz Htjb Ajdc Capacity: 610 x 450 mm Double miter cut capability 6-meter infeed conveyor 6-meter measuring conveyor Year of manufacture: 2018

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 12,000 mm, total width: 7,000 mm, Equipment: CE marking, documentation/manual, Complete tube processing system from 1999, consisting of the following components: Nedsz S U Uvopfx Ab Asdc 1. Automatic tube feeding system for tubes up to 7,000 mm in length. 2. BEWO ECH-110-M - Tube circular saw for sections with a diameter of 10 - 110 mm and a length of 250 to 3,000 mm. 3. BEWO DB-90 - Tube deburring machine. 4. ROWAMAT RL-3000 - Cleaning machine for tube sections up to 3,000 mm in length. The complete system can be inspected by appointment at ELIT INOX d.o.o. in 32000 Cacak, Serbia.

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table Ndjdpor Ik Sqsfx Ab Aoc • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: used, Year of construction: 2000, functionality: fully functional, table length: 810 mm, table width: 975 mm, SECOND-HAND BAND RE-SAWING MACHINE MEBER MOD. SR900 - Table dimensions mm. 975x810 Ndsdpfjx Rt Aasx Ab Aoc - Motor Kw 11 - Year 2000 (CE)

Condition: used, Year of construction: 1995, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 25 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW Ndjdpfx Abszp Iu Sj Asc work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 4912, functionality: fully functional, cutting height (max.): 500 mm, cutting width (max.): 770 mm, overall weight: 1,200 kg, saw band length: 5,540 mm, saw band width: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting length up to feed roller: max. 225 mm Cutting length up to stop: max. 210 mm Cutting width up to column: max. 770 mm Cutting height: max. 500 mm Saw blade width: max. 80 mm Ndjdpez Ea Iajfx Ab Aec Saw blade length: min. 5,380 mm Saw blade length: max. 5,540 mm Wheel diameter: 800 mm Table width: 1,200 mm Table length: 800 mm Table: Adjustable MACHINE DETAILS Dust extraction port diameter: 120 mm Voltage: 400 V Power consumption: 31 A Fuse: 63 A Main motor power: 15 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 1,800 x 2,100 x 2,380 mm Weight: 1,200 kg EQUIPMENT Adjustable table CE marking Feed rollers, automatic, electric

Condition: used, Year of construction: 2008, Edge banding machine Manufacturer: IMA Type: Advantage 60 Year of manufacture: 2008 Technical data - Feed speed: 16 m/min - Workpiece thickness: 8 - 60 mm - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Edge thickness: 0.3 - 8 mm - Edge height: 12 - 65 mm - Edge length: 160 - 350 mm Njdpfez Tf E Ujx Ab Aodc - Joint milling unit - Air blow nozzle for removing loose particles - Workpiece preheating - Glue application unit - Cross-cutting saw unit - Multi-function milling unit for milling and rounding corners - Profiling blades - Cleaning agent spray system (Riepe) - Surface finishing blades - Brush unit - Groove milling unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Band saw blade grinding machine Njdez Uq E Aepfx Ab Aedc Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes can be selected Operating manual available Feed rate: 30 or 60 teeth per minute.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Njdpfxemrp Tlj Ab Aedc Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing logs and boards and features a continuously variable feed rate and a cutting depth control. Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Continuously variable feed rate Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm in length × 600 mm in diameter Equipment: Resawing device for cutting logs and boards Programmable cutting depth control ELGO Electric Type 87P Pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm Heavy-duty industrial design Condition and scope of delivery as per photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Additional information: The lower band saw wheel protrudes approx. 300 mm below floor level. Therefore, a corresponding floor recess is required for the installation of the machine. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site but would be available in the short term! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Nedpfx Abjzxrtqe Aedc Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: like new (used), Year of construction: 2014, operating hours: 2,808 h, functionality: fully functional, input voltage: 400 V, overall weight: 3,760 kg, intake manifold diameter: 200 mm, noise level: 75 dB, actuation type: manual, The machine is in like-new condition. It has only 2,880 operating hours. It can also be inspected while in operation. Ndjdsz R Uf Hjpfx Ab Aec

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Efficient coolant application to the saw band guides. Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Ndedpfxjd Hx Uqs Ab Aec Automatic retraction of the saw arm to its upper end position. Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Njdpfxey E Hyno Ab Ajdc Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Ndjdpfx Abegculvs Ajc Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 2024, New demonstration machine! Ndjdpfxowggako Ab Asc Particularly heavy-duty design with high dead weight for maximum smooth running • Exceptionally quiet and precise operation thanks to torsion-resistant machine housing • Large cast parallel fence with round bar guide, easy to move • Cast flywheels with rubber coating and cleaning brush • Large grey cast iron saw table, tiltable with ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Door safety switches • Self-braking motor • Two extraction ports Technical data: Table dimensions (L x W x H): 720 x 520 x 860 mm Cutting speed: 1,650 m/min Weight approx. 240 kg Max. cutting height: 350 mm Max. cutting width: 520 mm Max. saw blade length: 4,260 mm Saw blade thickness min./max.: 0.5 / 0.6 mm Precision guides top/bottom Saw table tilt: 0 - 20° Machine dimensions (L x W x H): 870 x 620 x 1970 mm Location in stock:

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, operating hours: 1 h, Horizontal bandsaw / SÄGMA S-270 G / Demonstration machine -CE marking -Cutting capacity / Round at 90 degrees / 225mm -Cutting capacity / Square at 90 degrees / 180x180mm -Cutting capacity / Flat at 90 degrees / 265x120mm -Saw blade dimensions 2450x27x0.9mm -2 cutting speeds / 37.5 & 75 / meters/minute -Infinitely adjustable cutting pressure -Coolant system Nodpoz R Dt Sefx Ab Aodc -Miter cutting device -Quick clamping device / Material clamping -Emergency stop -Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.6 meters / Weight 230kg Errors and omissions excepted.

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW Njdpfx Abey Hu H Ej Asdc -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm Ndsdpfx Absfk Ew Ee Aec +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Nsdsmrnk Eopfx Ab Ajdc Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 526-02514, functionality: fully functional, DoALL 2013-V3, 2013-V3 Vertical contour band saw Manufacture DoAll sawing Products U.S. Year of manufacture: 08/2002 S/N 526-02514 CE marked Variator drive Max. Working height 330 mm Maximum width up to the column 508 mm Capacity of the machine: b 20″ x b 13″ (508mm x 330mm) These vertical machines are one of the most versatile machines on the market! Vertical contour saws for cutting aluminum, brass, copper, mild steel, tough tool steel, stainless steel and sheet metal as well as cutting plastics and fiber materials. They are also available with a variety of attachments that allow for cutting contours, slices and more. The 2013-V2 has the same main structure, capacity and features as the 2013-V3. The only difference is the power of the motor: 2013-V3: 2.2kW/3HP, 400V, 50 Hz Standard equipment One set of high-speed guide blocks with inserts for belts from 3 to 13 mm One set of steel guide inserts for belts of 6, 10 and 13 mm Belt speed indicator Removable chip tray Belt tension indicator Chip blower (requires factory air) Handwheel for lifting the column AC drive with variable speed (speed control, soft start and dynamic braking functions) Belt door interlocks Dual range gearbox Ndedpfeu A Ikhsx Ab Ajc Gear oil One bi-metal band saw blade Operating instructions and spare parts manual

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Maximum blade length: 4735 mm · Minimum/maximum saw blade width: 15 mm / 30 mm · Optional, with special coating: minimum/maximum saw blade width: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Dust extraction port: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German engineering · Machine stand in aesthetically pleasing, modern, torsion-resistant double-chamber steel welded construction · Upper and lower doors secured via limit switches Ndedpfxj Aa Ea Do Ab Aec · Upper and lower precision band saw blade guide APA 2, size 2 · Finely planed gray cast iron table · Table top can be swiveled up to 45° · Dynamically balanced band saw wheels with vulcanized rubber tires · Fence rail on the left side of the saw blade can be used; fence profile can be folded down · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth spacing 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard via handwheel with locking ratchet · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE compliant including transport pallet including preliminary freight to 65239 Hochheim Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2017, Behringer LPS 60-T – Vertical metal band saw - Servo feed with cutting pressure control - Robust cast iron band guide - Fast band change - Operating hours of the saw drive: 32441 h Ndjdpfx Ajz H Ac Asb Aec - Year of manufacture: 2017 Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (incl. base pan) - Cutting speed: 10 - 110 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tension pressure: 85 bar - Coolant quantity: approx. 100 l - Motor power – Saw drive: 5.5 kW - Motor power – Hydraulic pump: 2.2 kW - Motor power – Coolant pump: 0.15 kW - Motor power – Chip conveyor: approx. 0.26 kW - Connection value: approx. 10.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current consumption: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 267, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 320 mm, cutting width (max.): 615 mm, roller diameter: 630 mm, pivoting range: 10 °, actuation type: manual, total height: 2,100 mm, total length: 1,100 mm, total width: 1,400 mm, overall weight: 800 kg, table height: 1,020 mm, Equipment: lighting, rotational speed infinitely variable, Vertical band saw, manufacturer Kölle Type ST 63 Year of manufacture: 1980 Overhang: 615 mm Maximum cutting height: 320 mm Table size: 780 x 770 mm Table surface can be tilted +/- 10° Cutting speed, continuously adjustable from 15 to 2300 m/min (3 gear stages) Band saw blade length: 4580 to 4740 mm Nsdpfx Aezymyhsb Aedc Band saw blade welding device: IDEAL Halogen lamp Heavy-duty construction made of gray cast iron. No vibrations, even at high speeds. Due to the large cutting speed adjustment range, the machine can be used for both wood and metal. Connection: 400 V, 16 A Weight approx. 800 kg Dimensions (W x D x H): 1400 x 1100 x 2100 mm Available from November 15, 2026.