Used Apv Rannie Apv Rannie Homogeniser Blue Top 1000 Litres/Hour ( 220Bar) for sale (31,220)

Condition: not inspected (used), Year of construction: 2008, functionality: limited functionality, Model/Type: Erdwich M480/3-1000 Serial No.: 1896 Year of construction: 2008 Running Hours: unknown Gedpfx Asylhbfok Uskb Warranty: Partially functional; no warranty or guarantee Availability: approx. 4-8 weeks after receipt of down payment Details: + Cutting unit, hopper, frame, and control unit + 3-shaft shredder + 2x 22 kW drive motors + Chip conveyor

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Gksdoz Abkyspfx Ak Uob

Condition: used, Year of construction: 1999, functionality: fully functional, Item: AV2262-Vertical-3,000L Vertical stainless steel process tanks – APV 5 units. External dimensions: Dia Ø 1250 mm, Total height 3700 mm Agitator from top Gkedpfx Akjwm Ntgs Uob Capacity 3,000 L / each Double jacket Manhole at the top. 3 legs AISI 304.

Condition: good (used), Year of construction: 1972, Turntable diameter: 1000 mm Torque at the spindle: 900 Gksdjz Akadspfx Ak Usb Total power requirement: 17 kW Machine weight (approx.): 6.1 t

Condition: used, Year of construction: 1997, Equipment: all wheel drive, Very nice wheel loader – ideal for storage areas, etc. Gkjdpfx Akoy U Szij Uob Bucket with teeth, approx. 2.3 cubic meters Weight approx. 12.5 tons With central lubrication system – interior and exterior in top condition! Bucket pivot point approx. 3.80 meters 6-cylinder engine 3-speed powershift transmission Tires approx. 70% good We can offer you transport to your location. Sale only to commercial businesses or for export. Sale as is, in the condition the machine is in. No guarantee or warranty. The mileage or operating hours stated are read from the odometer or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be considered as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of a purchase agreement. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately if necessary. We will also gladly accept your vehicle as a trade-in. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a trouble-free transfer abroad.

Condition: used, Year of construction: 1997, Press force: 1000 t Stroke: 315 mm Strokes per minute: 21 - 42 /min Frame width: 1260 mm Side frame opening: 830 mm Shut height (max. stroke, top position, adjustment upwards): 1295 mm Gkedpfx Akezypx Tj Ueb Table area: 1250 x 800 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Table height above floor: 670 mm

Condition: ready for operation (used), Year of construction: 2023, operating hours: 8,900 h, functionality: fully functional, Heller HF5500 including Fastems FPT 1000 Heller HF5000 5-axis machining center Gksdpjw I Tupsfx Ak Ueb Control: Siemens Sinumerik SL Spindle: HSK100 Tool magazine: 100 tools Fastems FPT1000 18 pallet stations Planning software (unmanned shift)

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 6,150 mm, construction height: 2,830 mm, operating hours: 677 h, fuel type: electric, mast type: triplex, Manufacturer + model: STILL EK-X 48 Mast: 3F6300 ID: 25043.7302 Category: Demo Mast: 3F Lowered height: 2830 mm Lifting height: 6150 mm Capacity: 1000 kg Gedpfozv Rwvox Ak Uskb Platform height: 6300 mm Picking height: 7900 mm Cabin width: 1200 mm Year: 2018 Hours: 677 hours Capacity: 48 V / 620 Ah Options: Very unique!! - Electrically adjustable dashboard - Through-loading platform for use with EURO pallets - Original STILL safety gates (with safety features!!) - 2 x Blue spot lights!!

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm Gsdpfx Akozvqi So Ujkb - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: like new (used), Year of construction: 2018, operating hours: 428 h, functionality: fully functional, Manufacturer: N&N Nadratowski Model: MIX-450EF Year: 2018 Condition: Used Serial Number: 1603 Godpfx Aozzyifjk Uekb Stock Number: 3431 Mixer: paddle mixer, intermeshing Capacity: 450 litres Mixing speed: 5 - 40 RPM Infeed height: 1400 mm Outfeed height: 700 mm Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 1000 x 1600 mm Weight: 650 kg With Mitsubishi PLC, touch screen and programming control Frequency controlled speed, front and reverse. Outlet into 200L tote bins. Only 428 working hours, machine is as new condition!

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) EQUIPMENT Gkjdpszxgf Uofx Ak Uob Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5758 Cat.: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2441 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! - 2 x Blue spot Gedpfx Aezv Ru Ujk Uekb - PSA - Floodlights - Induction / Wire guidance

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN Gedpfx Ajgrzh Eek Uokb ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, operating hours: 26,000 h, power: 34 kW (46.23 HP), pressing force: 400 t, stroke length: 365 mm, operating speed: 9 mm/s, reverse speed: 90 mm/s, clearance between the columns: 4,600 mm, total length: 6,130 mm, total width: 2,995 mm, total height: 3,680 mm, overall weight: 36,700 kg, Press brake BYSTRONIC - Xpert 400 MACH-ID 9798 Make: BYSTRONIC Type: Xpert 400 Control: MMC-Bend Year: 2010 HA4 backgauge X, R, Z1 and Z2 WILA NewStandard Top Tool clamping Power on Hours 26.000 H PILZ Laser safe  2 x Arm on front 1000 mm Max. bending length: 5100mm Distance between column: 4600mm Max. pressing force: 400T Dis. Beam - Table: 650mm Gedpezxq Erofx Ak Uekb Beam stroke: 365mm Table Width: 280mm Troth beam: 410mm Approch speed: 120mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1, Y2, X, R, Z1, Z2 Control: MMC BYBEND 7.7.0.0 Crowning: Yes Hydraulic toolclamping: Wila New Standard Power: 34kW Length: 6130mm Width: 2295mm Height: 3680mm Weight: 36700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Gkjdpfx Aozxzagjk Usb Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: good (used), Year of construction: 2008, operating hours: 333 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 3,000 rpm, table width: 850 mm, table load: 5,000 kg, table length: 2,200 mm, mount diameter: 400 mm, table height: 810 mm, spindle motor power: 38,000 W, Anayak Performer 2000 in top condition Demonstration machine with only 333 operating hours Complete maintenance and repairs performed by the professionals at GSN Maschinen-Anlagen-Service GmbH (formerly WMS Kaiser) Control system: Heidenhain ITNC530 Handwheel: 410 Travel distances X/Y/Z: 2000/1000/1100 mm Sliding table clamping area 2200x850 mm Working height: 810 mm Table load capacity: 5,000 kg T-slots 5x T22, spacing 150 mm Rotary table: Spirsin 81260F, fully integrated into the control system Diameter 400 mm Can be used horizontally or vertically Godpezzw N Aofx Ak Ujkb Includes manual tailstock Turret: Automatically pivoting universal turret Revolutions max. 3000 rpm Tool holder SK50 Additional equipment / options: Infrared measuring probe Heidenhain Compressed air for external cooling

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! Gjdpfx Akjpu A D Aj Uskb The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 1 x Yamato Dataweigh 14-head weigher with RCU-920 Remote Control Unit touch-screen control panel, top cone and collating funnel. Fitted with smooth weighing pans this weigher is ideal for free-flowing dried goods only. Model – ADW-E-1014S (Dataweigh Epsilon Series). Serial number - WG251076. Date of manufacture - 2022. Gedpfx Akszydaxs Uskb Weighing range - 20g to 3000g. Maximum pack volume - 10 litres. Speed - up to 100 drops / minute. Electrical requirements - 200-240 V / 50-60 hz / 1 phase. Overall dimensions - 1600mm long x 1600mm wide x 1530mm high. Supplied with User Manual, Drawings (including electrical) and Parts Manual.

Condition: used, Year of construction: 2021, machine/vehicle number: 20118-0004, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 250 mm, number of axes: 3, number of slots in tool magazine: 6, total height: 2,100 mm, total length: 3,900 mm, total width: 2,150 mm, overall weight: 2,900 kg, For sale: a very well-maintained and complete Comeva Nicron Vacuum Bars 13/32 CNC machining center, manufactured in 2021. This machine is ideal for flexible interior designers, furniture makers, or door specialists. Thanks to the generous working area of 3,200 x 1,300 mm and the adjustable beam table with vacuum cups, you can work quickly and precisely with solid wood, sheet materials, or frame/door elements. Highlights of this machine: - Beam table: Ergonomic and quick to adjust for various workpiece sizes. Gkedpfxez Af Suj Ak Uob - Powerful main spindle suitable for heavy milling work, grooving, and a drilling unit. - Automatic tool changer: 6-position tool magazine for fast cycle times. - Reliable vacuum system: Includes a high-quality Becker vacuum pump. Compact setup: Freestanding control cabinet on wheels with clear controls. Equipped with Pegasus software. The machine is located at a customer's site and can be viewed in operation; location: Staphorst, the Netherlands.

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Godpfx Asvzmtzok Uokb Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) Gsdpfezvcqzex Ak Uekb - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2022, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,900 mm, operating hours: 1,033 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V 10 / Mast: 2W5350 ID: 26083.5198 Category: Demo Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2022 Hours: 1033 hours Capacity: 24V / 930Ah Options: FULL options!! - DUAL steering!!!! Gkjdpfx Akezv Rrtj Uob - Special SAFETY gates!! - Adjustable forks! - 2 x Blue spot lights

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, total length: 2,868 mm, total height: 2,102 mm, total width: 1,960 mm, overall weight: 2,200 kg, Hello, we are selling several 3D printers from an insolvency estate. All are professional-grade devices from the automotive development and design sector. Gkodpfjz Ahq Tjx Ak Ueb This listing features the Stratasys Objet 1000 / J4100 from 2013. The printer underwent a mechanical overhaul by Stratasys in 2025 and was updated to the latest standards electronically and in terms of software. This upgrade cost approximately EUR 135,000. Accessories such as a replacement print bed with a mobile lifting frame and various spare parts are included. Consumables can be purchased additionally at a favorable price. This is a stereolithography printer, meaning liquid resin is cured using UV/laser technology, creating the component layer by layer with extremely high detail, precision, and excellent surface quality. Thus, it is an absolute professional-grade device that can, for example, print multi-colored automotive lights with a clear glass appearance. A new device in this print volume size currently costs well over EUR 350,000 (net). Technical data: Build volume/build size max: 1,000 × 800 × 500 mm Layer thickness up to 27 microns High speed: up to 3 base resins, 27 µm resolution Super high speed: 1 base resin, 55 µm resolution PolyJet UV technology 110–240 V Dimensions: 2,870 x 1,960 x 2,105 mm Weight: 2,200 kg The price is ex works; we can arrange loading. We also offer worldwide shipping and the necessary customs documents, for an additional fee. The device can be inspected at our warehouse. Price includes VAT; invoice with VAT shown separately. !! Sale only to business customers, without warranty, no guarantee, no exchange, sold as is. Further description from the manufacturer: Create large or small production tools and full-size prototypes. Maximize your productivity and achieve a quick ROI with the Stratasys J4100™ 3D printer. Its multi-material capability, high throughput, and extra-large build platform enable faster, smarter, and more precise workflows. Thanks to PolyJet Technology™, this powerful system enables engineers, manufacturers, and designers to 3D print any design – no matter how complex or detailed. The size of the parts is irrelevant: the J4100 prints both large and small prototypes with equal precision. Print large parts with a length of over a meter in a single print job. This eliminates the need to split large CAD files and later assemble the parts. Print many parts in a single print job and benefit from competitive unit costs. The reliable and user-friendly J4100 enables you to produce parts that are ready for use with minimal or no post-processing. The support material can be quickly removed with a water jet, and for most applications, the smooth, multi-material parts do not require polishing or painting.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Gksdjxykafopfx Ak Usb Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: new, Year of construction: 2023, functionality: fully functional, power: 9.75 kW (13.26 HP), usable tank capacity: 1,000 l, Unused PHARMIX model HV 1000 stainless steel product contact parts conical mixer designed for heavy products with a bulk density of up to 3 kg/m³. The mixer has a working capacity of 1000 litres. The mixing screw, with a diameter of 310 mm, is driven through a NORD gearbox by a 9 kW electric motor and supported by a bottom pintle bearing (hard metal). The stainless steel arm is driven through a NORD gearbox by a 0.75 kW electric motor. The gearbox is prepared for liquid injection, with a 10-litre pressure vessel designed for a maximum working pressure of 5.5 bar. Includes a stainless steel outlet knife gate valve L65 DN300, spare screw agitator, and control panel with frequency converter. It is also possible to supply a supporting construction at additional cost (drawing shown in the photo). New 2023. Godpfexldtvjx Ak Uekb