Used Apv Carbonisation Plant for sale (3,156)

Condition: used, Year of construction: 2010, “Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves Additional title: Cleaning system for cleaning pressurised tank cellars Volume circulation tank: 400 l Length: 2,5 m Width: 3,0 m Height: 2,9 m Operation / Control: Simatic S7 Material: contact surfaces from stainless steel Position: on stainless steel frame with feet Features: Circulation tank; 2 centrifugal pumps; shell-and-tube heat exchanger; 4-channel chemical dosing system; control cabinet with touch panel; flow measurement; conductivity measurement; temperature measurement; various pipes and valves Guodoztwu Aspfx Angjh

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Guedpfx Aezvddcengeh

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher Gjdpfx Ajzvfk Dengouh • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Gsdpfszxqd Isx Angeuh Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. If you have any questions or require further information, please feel free to send us a message or give us a call. Gujdpfeywua Tox Angjh The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Godpfoyyzv Tox Angeuh

Year of construction: 2026, condition: new, functionality: fully functional, power: 80 kW (108.77 HP), load capacity: 400 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. Gusdpfx Aoyy Ricengjh • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. Guodpozq Axzofx Angoh • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: Power Line 300 T2, For sale: a high-quality, continuous/throughput industrial washing system manufactured by the German company LPW Reinigungssysteme GmbH, model Power Line 300 T2. The machine was built in 2018 and is complemented by an original MAHLE Filtersysteme extension/expansion from 2019. Gsdpfez Atinox Angsuh

Condition: excellent (used), Year of construction: 2008, operating hours: 84,000 h, functionality: fully functional, power: 526 kW (715.16 HP), type of cooling: air, input frequency: 50 Hz, Jenbacher J312GS hours: 84,000 hours overhaul at 60,000 hours. Year: 2008 Rated power: 526KW Frequency: 50HZ Very well looked after unit was installed in a hospital and serviced and maintained regularly. Gusdpfx Anozwpnpsgoh

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Gusdpfonxk Ixsx Angsh

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Guedpoucfwpefx Angeh

Condition: ready for operation (used), Year of construction: 2012, A complete carton sealing and conveyor line (packing line) is available. 1) Carton sealing machine Soco T-10, year of manufacture: 2012, sealing capacity: 30 cartons/min, working height range: 620mm-720mm, adhesive tape overlap: 70mm, max. adhesive tape roll diameter: 385mm, min. carton dimensions X/Y: 90mm/80mm, max. carton dimensions X/Y: 515mm/520mm, machine weight: approx. 200kg. 2) Bottom flap folder Soco F-100-5, year of manufacture: 2012, carton width range: 190mm-240mm, max. carton length: 620mm, machine dimensions X/Y: approx. 460mm/895mm. 3) Conveyor technology consisting of roller conveyors and plastic rollers, roller diameter: 48mm, roller conveyor length: 2500mm, roller conveyor width: 300mm, center distance: 60mm. 4) Weighing system Rhewa 82 basic, max. weighing capacity: 150kg. 5) Lift table Ecoline U-shape, platform dimensions X/Y: 1450mm/1140mm, max. load capacity: 1000kg, max. lifting height: 760mm. 6) Vacuum tube lifter J. Schmalz Jumbo Sprint 45-Zent, year of manufacture: 2003, load capacity: 45kg, max. lifting speed: 60m/min, max. lift: 1800mm, suction cup diameter: 110mm, lifting column inner diameter: 140mm, length: 2550mm, gripper height: 112mm, suction cups: 4, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Gjdsx I Rqvepfx Angjuh

Condition: used, Year of construction: 1991, Allis Chalmer 60 109 M-II Primary Gyratory Crusher 2 complete units, intake size: 1,500 mm (60 inches), cone diameter: 2,725 mm (109 inches), output size: 175 to 250 mm (7 to 10 inches), throughput: approx. 4,700 to 6,400 t/h, without electric motor (required drive power: 750 kW), including one hydraulic hammer each, total weight: approx. 570 t per unit Godsvg A Raepfx Angjuh

Condition: new, Year of construction: 2025, machine/vehicle number: 857226635, Gasparin Jaw Crusher GI107C VESUVIO Mobile jaw crusher on a tracked chassis The mobile crusher GI107 VESUVIO stands for versatility and can be configured in two different ways. Equipped with a grizzly vibrating feeder (GI107C), it is suitable for more traditional applications. With a vibrating feeder and a pre-screen, the machine (GI107CV) is suitable for demanding applications with high fines content and high material moisture. With its standard equipment, including the patented HCS system (Hydraulic Crushing System), VESUVIO is the best answer to the requirements of professionals and rental companies. Godpshd I Rwjfx Angjuh Production capacity: approx. 300 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Crushing gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3000 mm Dust extraction Tank pump Magnetic separator Warranty: 1 year, up to a maximum of operating hours from the start of operation of the system Technical data: Jaw crusher: 1020 x 700 mm Crushing gap: 45 to 180 mm Feed hopper: 5 m³ - 2000 x 3960 mm Grizzly feeder: 970 x 3600 mm Main conveyor belt: 800 x 9600 mm 4-cylinder diesel engine with constant speed: 82 hp / 60 kW, emission stage V Control panel Tracked chassis: 400 x 3310 mm Weight: kg Transport length: 12900 mm Transport width: 2530 mm Transport height: 3200 mm Further information Application: Construction, General condition: very good, Technical condition: very good, Optical condition: very good, Delivery terms: EXW.

Condition: new, Year of construction: 2025, machine/vehicle number: 401064052, mobile concrete plant Frumecar EBA 1000 - Year: NEW - 4 aggregate hoppers of 25 m³ - Capacity: 50 m³/h - mixer size: 1.0 m³ / 1500 liters - K2 portable computer system - screw conveyor for cement - cement silo 55 tons - international assembly included - 2-year guarantee This offer is subject to change, and may contain input errors and mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. more machines and mixing plants on our website Gsdpfx Anshd I S Aogsuh Further information: Intended use: construction, usable material: concrete.

Condition: new, Year of construction: 2025, machine/vehicle number: 872406335, Frumecar EMA 500 concrete batching plant Year: NEW Production: 30 m3 per hour * Capacity of the aggregate hopper – 25 m3 (4 x 6.25 m3) Godpfx Anehd I Utegeuh * The bunker has 8 discharge gates with pneumatic opening system (2 per compartment) * Mixer – planetary mixer, 0.5 m3 of vibrated concrete per cycle * Skip for the elevation of the aggregates * Water pump is included * Compressor is included * Large control cabin is included (2.0 m x 2.0 m) with air conditioning * 1 cement silo, 60 tons * Erection of the plant and training of your employees are included * 1-year guarantee from startup of the plant More machines and mixing plants can be found on our website. Further information: Intended use: Construction, Usable material: Concrete, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 381201764, Gasparin GI118CV OLIMPO Mobile jaw crusher on a tracked chassis The sheer power that the OLIMPO delivers thanks to its 1100x800 crusher is the ideal prerequisite for a specialized machine for professionals in quarries and recycling plants. This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing maximum profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest level of robustness against stresses. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The OLIMPO crusher certainly delivers convincing and unparalleled performance both in natural stone applications, in recycling, and in rental operations. Production capacity: approx. 360 tons/hour Godpfx Aehd I U Ejngsuh Patented HCS system Proportional valve with "Load Sensing" for optimizing the system and reducing fuel consumption by approx. 30%. Optional pre-screening Hydraulically adjustable crushing gap, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction system Tank pump Magnetic separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the system Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Two-deck vibrating screen 1020 x 2000 mm Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed, 82 hp/60 kW, emission stage V Control panel Tracked chassis 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction General condition: very good Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2025, machine/vehicle number: 997307957, Gasparin Jaw Crusher GI118C OLIMPO mobile jaw crusher on crawler tracks The sheer performance that the OLIMPO delivers, thanks to the 1100x800 crusher, makes it the ideal machine for professionals in quarries and recycling operations. This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing the highest profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest robustness against stress. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The OLIMPO crusher certainly offers convincing and unparalleled performance in applications involving natural stone, recycling, and rentals. Production output: approx. 330 tons/hour Patented HCS system Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption by approx. 30%. Optional pre-screen Crushing gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction Tank pump Magnetic separator Warranty: 1 year or up to max. operating hours from the start of operation of the plant Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Guedpehd Nabefx Angoh Feed hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Grizzly feeder 970 x 3600 mm Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed 82 hp/60 kW, emission stage V Control panel Crawler tracks 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 180965471, Additional options and accessories Notes: Mobile impact crusher on crawler tracks The K1 impact crusher with crawler tracks, the newest addition to the product range, features an impact mill with a capacity of 250 t/h. It can be equipped with post-screening with recirculation in a closed circuit to perfectly calibrate the end product. It is valued for the excellent quality of the crushed product and also performs optimally in terms of operational efficiency. Production capacity: approx. 250 tons/hour Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Gap setting hydraulically adjustable, even during the crushing process. Quick locking system with wedges and tilting cylinders. Dust extraction system. Tank pump. Magnetic separator. Warranty: 1 year up to a maximum number of operating hours from the start of operation of the plant. Technical data: Impact crusher, type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20 mm only possible with the 3rd grinding track). Feed hopper, 4 m³ - 1800 x 3700 mm Grizzly feeder, 900 x 3400 mm Main conveyor belt, 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Gedpfxjhd Naie Angouh Control panel Crawler tracks, 400 x 2900 mm Weight: kg Transport length: 12560 mm Transport width: 2550 mm Transport height: 3200 mm Further information: Intended use: Construction, Overall condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 499957954, Mobile impact crusher Gasparin GI1010CVR K1R on tracked chassis K1R machine with crawler undercarriage, the latest addition to the product range, featuring an impact mill with a capacity of 250 t/h. Can be equipped with a downstream screening system with return to the closed circuit to perfectly calibrate the final product. It is valued for the excellent quality of the crushed product and also performs optimally in terms of operational efficiency. Production capacity: approx. 250 tons/hour Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Clearance adjustable hydraulically, even during the crushing process. Fast locking system with wedges and pivoting cylinders. Dust extraction system. Gjdpehd Namsfx Angjuh Tank pump. Magnetic separator. Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the plant. Technical data: Impact crusher, type M x 700 mm Crushing clearance from 30 (20) to 100 mm (clearance adjustment to 20 mm only possible with the 3rd grinding path). Feed hopper, 4 m³ - 1800 x 3700 mm Single-deck vibrating screen, 950 x 1500 mm Main conveyor belt, 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Control panel Tracked chassis, 400 x 3310 mm Weight: kg Transport length: 15400 mm Transport width: 2550 mm Transport height: 3300 mm Return system: single-deck screening machine 1200 x 2500 mm. Swiveling discharge conveyor belt under the screening machine for return to the circuit. Two-deck vibrating screen with conveyor belt for fine material. Further information: Intended use: construction industry, general condition: very good, technical condition: very good, optical condition: very good, transport dimensions (L x W x H): 15.4 x 2.55 x 3.3.

Condition: new, Year of construction: 2025, machine/vehicle number: 299477763, Mobile impact crusher on a tracked chassis The K1R impact crusher with crawler tracks is the latest addition to the product range, featuring an impact mill with a capacity of 250 t/h. It can be equipped with a downstream screening system with recirculation in a closed circuit to perfectly calibrate the final product. It is valued for the excellent quality of the crushed product and also delivers top performance in terms of operational efficiency. Production capacity: approx. 250 tons/hour Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approx. 30%. Gap setting hydraulically adjustable, even during the crushing process Fast locking system with wedges and pivoting cylinders Dust extraction Tank pump Guedpfxjhd Naqe Angsh Magnetic separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the plant. Technical data: Impact crusher, type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20 mm only possible with the 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm Single-deck vibrating screen 950 x 1500 mm Main conveyor belt 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Control panel Tracked chassis 400 x 3310 mm Weight: kg Transport length 15400 mm Transport width: 2550 mm Transport height 3300 mm Closed-circuit system: Single-deck screening machine 1200 x 2500 mm, pivoting discharge conveyor under the screening machine for recirculation into the circuit. Further information Application: Construction, Unladen weight: kg, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 648125409, FRUMECAR MODULMIX 3000 CONCRETE BATCHING PLANT Year: New Capacity: 120 m³/h - 4-5 aggregate hoppers / in-line arrangement - Hopper capacity: 60-120 m³ - Production capacity: 120 m³/h - Mixer type: twin-shaft mixer - Mixer size: 3.0 m³ / 4000 liters - K2 fully automatic computer system Gjdpfx Ajhd Na Rjngsuh - Electric control system: Siemens S7 - Cement screw diameter: 273 mm - Cement silo: 1-4 - International assembly included - 2-year guarantee from startup - Winter housing possible This offer is subject to change, and may contain input errors or mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. More machines and mixing plants can be found on our website. Further information: Intended use: Construction industry Usable material: Concrete General condition: very good Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Equipment: lighting, Complete system with chemical pretreatment (7 zones) for GSB certification (QUALICOAT) (suitable for multi-metal processing) All dimensions and further modifications can be considered during design and planning. The offer includes the following components: Pretreatment booth incl. reverse osmosis system Walk-in coating booth Powder gun Powder curing oven Dryer Manual conveying system Lift/lower station Electrical control Details: 1. Walk-in cleaning booth, pretreatment for steel and aluminum The cleaning booth is designed for automatic cleaning, using medium pressure spraying. The booth contains 7 different spray tanks. The maximum part dimensions are L = 6000 mm, W = 2000 mm, H = 2300 mm. 1 Booth dimensions Length 6,500 mm Width 3,000 mm Height 3,600 mm 2 Dimensions of complete pretreatment system Length 6,600 mm Width 4,640 mm Height 4,300 mm 1. Process Degreasing/Neutral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2. Process Acidic mineral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 3. Process Rinse 1 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 1 minute 4. Process Rinse 2 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds. 5. Process Rinse 3 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds 6. Process Nano-ceramic coating This process uses ambient temperature, time = 0.75-1.5 minutes, draining time = 60 seconds 7. Process Overhead spray ring for post-rinsing after process 6 Rinsing with ambient temperature in this process, time = 1 minute, draining time = 60 seconds 8. Process Passivation, no-rinse for aluminum Rinsing with ambient temperature in this chamber, time = 2-3 minutes, draining time = 1-2 minutes 1.1 Reverse Osmosis System Gjdoffv Tpepfx Angjuh Reverse osmosis system 250 liters/hour 1.2 Oil skimmer Tank No. 1 is equipped with an oil skimmer “UniSkim-21-100”. Design: The spray system is in 2 parts and is movable, and is moved up to 500 mm via a pneumatic sliding system. The return feed to the tanks is also movable via a pneumatic sliding system with 7 positions, designed to serve the 7 tanks. 2. Walk-in coating booth 1 Booth dimension Length 7,400 mm Width 4,000 mm Height 3,236 mm 2 Booth dimension incl. extraction system Length 8,552 mm Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for the entry/exit of workpieces, and an additional side door for the coating operator. 3. Wagner powder coating system, manual system “Sprint 2 B” 4. Powder curing oven 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 2,200 mm 3 Internal dimension Height 3,416 mm 5. Dryer 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 1,200 mm 3 Internal dimension Height 3,416 mm 6. Manual conveying system The conveying system consists of: The conveying system is designed for a crossbar weight of 700 kg, the trolley carries a maximum of 2,000 kg on 3 rails.

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Guedpoq I Nw Isfx Angsh