Used Allgaier Allgaier Recycling Separation Screen for sale (11,048)

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW An Inclined Shear is a heavy-duty machine used in metal recycling facilities to cut various types of scrap materials efficiently. • Mixed and heavy-duty scrap can be processed (HMS 1 & 2, cars, pipes, etc. ) • No scrap length limit • No operator needed • Cut length adjustment options • Electric and Diesel options • Stationary and semi-mobile options • Hydraulic blade tightening system • The guillotine is made of casting • A remote diagnostic system is implemented • Automatic lubrication • Good output density • Heavy-duty structure • Chrome-plated & tampered shafts and sensitively honed cylinders • Special anti-wear plates • Reliable filtration system for the hydraulic oil • Reliable cooling system depending on the working climate • Top-brand hydraulic and electronic components The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Model: IS 1350 Cutting Force: 1.350 ton Hold Down Force: 250 ton Side Compression Force: 2x200 ton Cutting Width: 1.040 mm Number of Cuts: 2-3 cuts/min. Lhodpfx Aegv Abpopmsk Capacity up to 50 ton/h Weight: 128 ton Electrical Motor Power: 3x132 kW Chamber Dimensions: (W x L) 2,45 m x 8,5 m. General Dimensions: (W x L) 4,6 m x 11 m.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. Ljdpfx Aogv I Ihepmjhk 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec Lhsdpfegv I N Ujx Apmjk 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Year of construction: 2024, condition: new, - Cutting Force : 1100 Tons - Capacity : up tp 50 tons per hour Lodsdfcpaopfx Apmehk - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 264 kW - Machine Weight : 85.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, - Cutting Force : 700 Tons - Capacity : up tp 20 tons per hour - Side Compression Force : 2 x 85 Tons Lhsdpfjgv Aacjx Apmek - Clemp Compression Force : 100 Tons - Electric Motor : 160 kW - Machine Weight : 55.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Ledped Iya Nofx Apmehk Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm Lhodpfxjdfc Iks Apmok 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, - Cutting Force : 900 Tons - Capacity : up tp 25 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 220 kW - Machine Weight : 78.000 kg - PLC Controlled - Remote Control Avaliable Ledpjgv Aa Ijfx Apmjhk - Output Length Adjustable

Year of construction: 2024, condition: new, IMPORTANT: MACHINE WILL BE BRAND NEW Ledpfx Ajgv Ix Ijpmjhk All electric-electronic components used are Schneider and Siemens Brands. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. The cylinder rods, especially “hard chrome plated” for resistance against any damage, are induction hardened to maintain maximum strength. The “Off-The-Shelf” equipment used in the electric and hydraulic systems are from reputable worldwide brands and comply with the CE European standards. The body of the machine is constructed from “DIN St52” material. After welding they are stress-relieved and sandblasted before painting. SEE THE TECHNICAL DESCRIPTION BELOW Electric Motors: 11 kW Machine Weight: appx 2.700 kg Cutting Speed: 5 cuts/min Blade Length: 620 mm Max. Working Pressure: 250 bars Cutting Force: 150 tons Machine Dimensions (Width x Length x Height): 750 mm x 2.500 mm x 1.300 mm

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 180 kW Lhedpogwcc Aofx Apmek 2. Machine Weight: 20.000 kg 3. Shredding Capacity: 10 t/h (Steel) 15 t/h (Copper) 4. Blade Quantity: 90, Blade Thickness: 100 mm. 5. Loading Chamber Dimensions: 1.600 mm x 2.400 mm 6. Shredding Chamber Dimensions: 1.000 mm x 1.600 mm 7. Replacement and maintenance of the blades can be easily done from the top of the chamber. 8. Cutting blades are made of material No: 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (Twisting and breaking resistant ) 10. All chamber walls will be covered with anti-wearing armor steel material HARDOX 500. 11. All static blades and distance rings will be made of HARDOX 450. 12. Speed: 4 – 6 rpm 13. The movement power of shafts will be provided by four planet reductors which are driven by four power-controlled bi-directional hydro motors. Hydraulic equipment will be PARKER brand or BOSCH-REXROTH. 14. There will be hydraulic oil and reducer oil cooling units separated from each other. 15. Each shaft will be able to move independently from each other. 16. The loading of the shredder can be done by crane 17. The machine will stop itself with an acoustic warning with the help of security sensors which are going to protect the machine against any harm. 18. There will be an automatic grease oiling system to keep bearings oiled automatically. 19. All electrical parts will be SCHNEIDER and SIEMENS brand. 20. The machine will be fully automatic with PLC control. There will be a touch screen on the control panel which will provide easy access to machine settings and process monitoring. 21. The machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) operation hours. 22. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.

Condition: new, Year of construction: 2025, Capacity: 1000 - 1500 kg/hour Lhedpod Im Adsfx Apmjk Electric Motor Power: 15 kW Machine Weight: 1800 kg

Year of construction: 2026, condition: new, functionality: fully functional, ERFOR GR7 Granulator – Efficient Plastic Recycling Solution We offer the ERFOR GR7 granulator – a robust and efficient machine designed for producing high-quality regranulate from plastic materials. An ideal solution for companies looking to process production waste and reduce raw material costs. Key Information: Throughput: up to 700 kg/h Materials: LDPE, HDPE, PP (films, production waste, printed materials) Stable, continuous operation High and consistent granulate quality Lodpfxey Eyrdj Apmshk Simple and reliable operation Equipment: High-performance plasticizing unit Automatic filtration system Granulation system Compact, industrial design Why GR7: Fast return on investment Reduced material losses Reliable and long service life Configurable to customer needs Condition: New / built to order Manufacturer: ERFOR / Koltex PRS Contact us – we will configure the machine for your material and required capacity.

Condition: used, Year of construction: 2019, operating hours: 40,000 h, functionality: fully functional, CTP SCREEN PTR 8900N _ GLV 512 WORKFLOW XMF 6.11 Complete Lsdpfxoy Enwns Apmjhk

Condition: used, Year of construction: 2023, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: C.009088, total width: 5,536 mm, total length: 5,536 mm, total height: 3,500 mm, Equipment: rotational speed infinitely variable, For any further information regarding this listing please contact Lhsdpfxey Dtyro Apmok

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Water separator - GOLD RIVER 300/1250 Technical data of the installation: Installed power - 13kW Power supply - 400V; 50Hz Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Recyclable materials: Aluminum cables of all kinds Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Lhjdjv I Skrspfx Apmsk Copper wires filled with silicone or gels 15-micron winding coils, contaminated with plastic and sticky paper Winding coils filled with silicone coating IMPORTANT!! We provide real performance!

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Lsdjua Tbwopfx Apmehk Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, Year of construction: 2025, overall weight: 150,000 kg, We offer Lines for shredding and separating non-ferrous metals and copper cables. The line can be freely modified according to the customer's needs. The attached visualization is illustrative. Machines included in the line: Drum Belt Magnetic Separator Multi-shaft shredder 2 x 18.5 kW MCW-110 1. Loading conveyor (controlled automatically by shredder, according to load) Technical data: - L – 4000mm -Working width – 720mm - Height – 2100mm - Geared motor – 1.5kW - PVC conveyor belt equipped with straight cleats. - Steel structure, placed on self-adjusting wheels 2. Unloading conveyor (receives the shredded material for further process) Technical data: -L. – 3600mm - Working width - 400mm - H – 2000mm - Geared motor – 1.1kW - PVC conveyor belt equipped with a sealing wave and straight cleats - Structure made of acid-resistant steel, placed on self-casting wheels 3. Magnetic separator – (automatically separates unwanted steel elements from the belt of the unloading conveyor) Technical date: - L – 1400mm - Working width – 380mm - Height – 300mm - Geared motor – 0.55kW - Structure made of acid-resistant steel - PVC conveyor belt equipped with straight cleats - Magnetic plate made of permanent magnets 4. Magnetic plate with quick-cleaning overlay – (separates very small steel elements) Technical date: - W – 490mm - L – 330mm -H- 80mm - Housing made of acid-resistant steel Vibrating feeder PWR-1000 Eddy Current Separator WPS-1000 Discharge conveyor no. 2 of the WPS-1000 separator . Horizontal shredder RKZ-1200 Dust extraction DUST EATER OPW-400 GoldRiver SWZ-700 Water Separator Automatic plastic receiver Lhjdpfjv I Shdox Apmsk Automatic metal vibration receiver.

Year of construction: 2022, condition: new, The MDS-1 Electric Motor Recycling Machine designed to accurate copper extraction from stator insert of electric motor with different types of diameter. Description: The machine use steel claws to extract copper from the stator shell during backward movement. Stator fixed on special rollers mounted on lifted platform, a holder located in front of the machine keeps the stator from moving. Steel claws release copper when the operator pulls leaver backward. Lhodpfx Aohix N Ajpmok The machine fitted on solid frame, equipped with two sizes of hydraulically operated claws, holder and lifting platform with rollers. Technical information: • Engine power – 11 kW • Maximum engine diameter – 690 mm • Minimum engine diameter – 150 mm • Two types of clamping jaws • Foot switch • Weight – 1250 kg • Dimensions – 2950 × 1150 × 1250 mm • Control panel with an electrical security system

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Lhsdpfxoh D H Rce Apmjk Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Vibrating Screen Technical Specifications Model: CVS-2060 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Why Choose CONSTMACH Vibrating Screens? Lhedpfxexpyinj Apmjk CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: new, Year of construction: 2026, functionality: fully functional, color: other, CONSTMACH dewatering screens and hydrocyclone systems are specially designed for producers seeking high efficiency and quality in fine material washing processes. These systems deliver superior performance in washing materials up to 7 mm in size. Their most significant advantage is their ability to retain even the finest particles, down to 90 microns, within the material. This ensures high-quality standards, particularly in applications where preserving micronized material is critical, such as in construction sand production. Lhjdpfxjxpxxue Apmok Material loss encountered in classic washing systems with helical or bucket designs is minimized thanks to CONSTMACH technology. Additionally, the system offers easy maintenance, durable polyurethane screen surfaces, and the advantage of easy storage of the dry final product. These features both reduce operating costs and ensure production continuity. Dehydration Screen and Hydrocyclone Technical Specifications MODEL: CDS-1225 Dehydration Screen Dimensions (mm): 1,200 x 2,500 Hydrocyclone Diameter: 20" Slurry Pump Motor Power (kW): 37 Vibrator Motor Power (kW): 2 x 4.5 Production Capacity (tons/hour): 60 - 80 MODEL: CDS-1635 Dehydration Screen Dimensions (mm): 1,600 x 3,500 Hydrocyclone Diameter: 26” Slurry Pump Motor Power (kW): 55 Vibrator Motor Power (kW): 2 x 7.5 Production Capacity (tons/hour): 100 - 150 MODEL: CDS-2040 Dewatering Screen Dimensions (mm): 2,000 x 4,000 Hydrocyclone Diameter: 2 x 26” Slurry Pump Motor Power (kW): 75 Vibrator Motor Power (kW): 2 x 11 Production Capacity (tons/hour): 150 - 200 Why Choose Constmach Dewatering Screens? Choosing CONSTMACH dewatering screens and hydrocyclones means not only high performance but also reliability. Superior engineering design, energy efficiency, and low maintenance requirements ensure your facility runs smoothly for years to come. CONSTMACH develops customized solutions for its customers' production needs, offering both quality and durability. Therefore, if you are aiming for an efficient washing and dewatering process, the CONSTMACH brand is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, functionality: fully functional, color: other, CONSTMACH dewatering screens and hydrocyclone systems are specially designed for producers seeking high efficiency and quality in fine material washing processes. These systems deliver superior performance in washing materials up to 7 mm in size. Their most significant advantage is their ability to retain even the finest particles, down to 90 microns, within the material. This ensures high-quality standards, particularly in applications where preserving micronized material is critical, such as in construction sand production. Material loss encountered in classic washing systems with helical or bucket designs is minimized thanks to CONSTMACH technology. Additionally, the system offers easy maintenance, durable polyurethane screen surfaces, and the advantage of easy storage of the dry final product. These features both reduce operating costs and ensure production continuity. Dehydration Screen and Hydrocyclone Technical Specifications MODEL: CDS-1225 Dehydration Screen Dimensions (mm): 1,200 x 2,500 Hydrocyclone Diameter: 20" Slurry Pump Motor Power (kW): 37 Vibrator Motor Power (kW): 2 x 4.5 Production Capacity (tons/hour): 60 - 80 MODEL: CDS-1635 Dehydration Screen Dimensions (mm): 1,600 x 3,500 Hydrocyclone Diameter: 26” Slurry Pump Motor Power (kW): 55 Vibrator Motor Power (kW): 2 x 7.5 Production Capacity (tons/hour): 100 - 150 MODEL: CDS-2040 Dewatering Screen Dimensions (mm): 2,000 x 4,000 Hydrocyclone Diameter: 2 x 26” Slurry Pump Motor Power (kW): 75 Vibrator Motor Power (kW): 2 x 11 Production Capacity (tons/hour): 150 - 200 Why Choose Constmach Dewatering Screens? Lodpfx Apoxqan Tjmjhk Choosing CONSTMACH dewatering screens and hydrocyclones means not only high performance but also reliability. Superior engineering design, energy efficiency, and low maintenance requirements ensure your facility runs smoothly for years to come. CONSTMACH develops customized solutions for its customers' production needs, offering both quality and durability. Therefore, if you are aiming for an efficient washing and dewatering process, the CONSTMACH brand is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Information: The prices listed in the advertisement are shared based on current information. However, due to changes in market conditions and supply processes, our prices may vary from time to time. Therefore, we recommend requesting a quote from us for accurate pricing information.

Condition: excellent (used), Year of construction: 2011, Screen PT-R 4300E Lhodpfex T Tftox Apmek Year of manufacture: 2011 SCL automatic plate loading Plates imaged: 114,000 Fuji 1-Bit Tiffbox Good condition.

Year of construction: 2025, condition: new, Overband magnet Length: 2500 mm Height: około 400 mm Width: 1000 mm Belt width: 750 mm Magnet width: 500 mm Lhsdpjh U R Tgjfx Apmek Magnet length: 1044 mm Power: 1,5 kW(hydraulic or electric) Magnet field: 400 Gauss(may catch 100 mm pieces from maximum distance 300 mm Overband new, 12 months warrenty,

Condition: new, Year of construction: 2025, Set of cones(concave + mantle) Maxtrak 1000 Medium Coarse - very good quality. 22%Mn, with SPECTROMETER CERTIFICATE, highest quality on market! Ledpoigvfvsfx Apmehk Parts number: 603/9052-22 MC + 603/9106