Used Zeta Potential Analyzer for sale (438)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Iasdpfx Aszlx E Tea Ejw Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Ijdpozb I Spjfx Aa Eoaw Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: used, mileage: 50,761 km, power: 120 kW (163.15 HP), first registration: 08/2023, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,370 mm, total width: 1,928 mm, total height: 1,916 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 93015A ----The vehicle is located at our site: Am Grün 1, 35066 Frankenberg (Eder) Mercedes-Benz Vito Panel Van 116 CDI extra-long Discover the Mercedes-Benz Vito Panel Van 116 CDI extra-long, a used vehicle in excellent condition, ideal for both commercial and private use. With its elegant ARCTIC WHITE exterior and modern design, this van is sure to turn heads. * Design and equipment line Base: Enjoy a high-quality interior that combines functionality and comfort. * Audio-navigation system Audio 40: Equipped with DAB+, Bluetooth, and a USB port, it provides first-class entertainment and navigation. * Rearview camera: Facilitates parking and maneuvering in tight spaces. * Regulated air conditioning (Tempmatik): Ensures a pleasant climate inside the vehicle, regardless of the weather. * Parktronic system (PTS): Assists with parking and prevents potential damage. * Hill-start assist: Ensures safe starting on inclines. * Automatic headlight activation: Increases safety in changing light conditions. Isdpfx Aaox A Nmpj Eeaw * Driver assistance system: Attention Assist: Detects fatigue and warns the driver. * Driver assistance system: Breakdown management: Provides support in the event of a breakdown. * Driver assistance system: Crosswind assist: Ensures stability in crosswinds. This Mercedes-Benz Vito is not only a reliable partner for everyday use but also a vehicle that impresses with its extensive features. Take the opportunity to purchase this vehicle and benefit from the many advantages it offers! Equipment lines and packages * Z9C Equipment package: Easy Cargo * MX0 BlueEFFICIENCY package * Z2K Design and equipment line Base * EZ5 Park package Exterior * E57 Tow hitch: Wiring for trailer socket * Drive type: Rear-wheel drive * ZM0 Version: Panel van * Aspherical exterior mirrors, both sides * F68 Electrically adjustable and heated exterior mirrors, both sides * Mounting rails for roof carrier * Third brake light * Windshield with antenna * Generator 200 A * GE1 Transmission 6-speed - TSG (Eco Gear) * Rear door without glazing (opening angle 270 degrees) * ZM0 Body/structure: Standard panel van * Body/structure: Extra-long station wagon * KB5 Fuel tank: enlarged * Rear fog light * RG1 Tires 205/65 R16C 103/101 T * JF1 Windshield wipers with rain sensor * Sliding door load/passenger compartment right * RS3 Steel rims 6.5x16 * Daytime running lights * K56 Fuel tank lid red * XG6 Permissible total weight 2.80 t Interior * V3L All-weather floor mats * Outside temperature display * Electric windows 2-way * Cup holders in the front * Wooden floor in the cargo area * HH9 Regulated air conditioning (Tempmatik) * Cargo area light LED * Cargo area partition with window * CL2 Steering wheel and gear/selector lever knob in leather * Rail system for load securing * Seat cover / upholstery: Fabric * S23 Seats in the driver's cab: Passenger seat as a two-seater * H16 Seats in the driver's cab: Driver's seat heated * SB1 Seats in the driver's cab: Driver's seat comfort * Window pillar trim * Interior trim in the cargo/passenger compartment: Hard fiber, half-height * Interior trim in the cargo/passenger compartment: Plywood Multimedia * EA4 Audio-navigation system Audio 40 (DAB+, Bluetooth, USB) * E1D DAB tuner (digital radio reception) * JH3 Communication

Condition: used, mileage: 50,761 km, power: 120 kW (163.15 HP), first registration: 08/2023, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,370 mm, total width: 1,928 mm, total height: 1,916 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 93015A ----The vehicle is located at our site: Am Grün 1, 35066 Frankenberg (Eder) Mercedes-Benz Vito Panel Van 116 CDI extra long Discover the Mercedes-Benz Vito Panel Van 116 CDI extra long, a used vehicle in excellent condition, ideal for both commercial and private use. With its elegant ARCTIC WHITE exterior and modern design, this van is a real eye-catcher. * Design and equipment line Base: Enjoy a high-quality interior that combines functionality and comfort. * Audio-navigation system Audio 40: Equipped with DAB+, Bluetooth, and a USB connection, it provides first-class entertainment and navigation. * Rear-view camera: Makes parking and maneuvering in tight spaces easier. * Air conditioning system (Tempmatik): Provides a comfortable climate in the interior, regardless of the weather. * Parking assistance system (PTS): Assists you with parking and prevents potential damage. * Hill-start assist: Ensures safe starting on inclines. * Automatic headlight activation: Increases safety in changing light conditions. * Driver assistance system: Attention Assist: Detects fatigue and warns the driver. * Driver assistance system: Breakdown management: Provides support in the event of a breakdown. * Driver assistance system: Crosswind assist: Ensures stability in crosswinds. This Mercedes-Benz Vito is not only a reliable partner in everyday life, but also a vehicle that impresses with its extensive features. Take the opportunity to purchase this vehicle and benefit from the numerous advantages it offers! Equipment lines and packages * Z9C Equipment package: Easy Cargo * MX0 BlueEFFICIENCY package * Z2K Design and equipment line Base * EZ5 Parking package Exterior * E57 Trailer coupling: Electrical system for trailer socket * Drive type: Rear-wheel drive * ZM0 Version: Panel van * Aspherical exterior mirrors, both * F68 Electrically adjustable and heated exterior mirrors, both * Mounting rails for roof rack * Third brake light * Windshield with antenna * Generator 200 A * GE1 6-speed transmission - TSG (Eco Gear) * Rear door without glazing (opening angle 270 degrees) * ZM0 Body/structure: Standard panel van * Body/structure: Extra-long station wagon * KB5 Fuel tank: enlarged * Rear fog light * RG1 Tires 205/65 R16C 103/101 T * JF1 Windshield wipers with rain sensor * Sliding door load/passenger compartment right * RS3 Steel rims 6.5x16 * Daytime running lights * K56 Fuel tank cap red * XG6 Permissible total weight 2.80 t Interior Iodozll Inspfx Aa Ejaw * V3L All-weather floor mats * Outside temperature display * Power windows, 2-way * Cup holder front * Wooden floor in the cargo area * HH9 Air conditioning system (Tempmatik) * Cargo area light LED * Cargo area partition with window * CL2 Steering wheel and gearshift knob in leather * Load securing rail system * Seat cover / upholstery: Fabric * S23 Seats in the driver's cab: Co-driver seat as a double seat * H16 Seats in the driver's cab: Driver's seat heated * SB1 Seats in the driver's cab: Driver's seat comfort * Window pillar trim * Trim in the cargo/passenger compartment: Semi-high hardboard * Trim in the cargo/passenger compartment: Plywood Multimedia * EA4 Audio-navigation system Audio 40 (DAB+, Bluetooth, USB) * E1D DAB tuner (digital radio reception) * JH3 Communication

Condition: used, This listing is for a Fisher Scientific Model 45 Colorimeter. The unit is in full working condition and is ready for immediate release. The Fisher Scientific Model 45 Colorimeter is a digital instrument that provides precise color measurements in a variety of laboratory applications. Here’s a detailed overview of its features and specifications: Key Features: Digital Colorimeter: The Model 45 is engineered to deliver accurate and consistent color measurements, suitable for various laboratory analyses. 240V Transformer: The instrument is equipped with a built-in transformer that operates on 240V, ensuring compatibility with power supplies in many regions. Ijdpoxxz Nzjfx Aa Esaw Wide Filter Range: The colorimeter features filters that cover the wavelength spectrum from 400 to 700 nm. This range is essential for analyzing visible light and enables the instrument to accurately assess color in different sample types. Versatile Measurement Capabilities: It is designed to measure the color of: Transparent Liquids: Suitable for solutions and liquid samples. Opaque Solids: Can analyze solid materials where color determination is needed. Powders and Pastes: Capable of measuring the color of powders and viscous materials, making it adaptable for a wide variety of applications. Used Condition: This model is available for purchase in used condition, which may present an opportunity for budget-conscious labs looking for reliable color measurement tools. Applications: The Fisher Scientific Model 45 Colorimeter is particularly useful in various fields, including: Quality Control: Used in production settings to ensure color consistency and quality in products such as food, pharmaceuticals, and paints. Laboratory Research: Employed in research laboratories for quantitative analysis of color in different samples, contributing to studies in chemistry, biology, and environmental science. Formulation Development: Assists in the formulation of products where color accuracy is crucial, such as cosmetic and personal care products.

Condition: used, Spectro Isdpfx Aszizdtea Esaw Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Complete analysis using the stationary spark spectrometer SpectroMaxX: With the aid of the spark spectrometer, the alloy content and trace elements of macroscopic solid samples can be determined with high accuracy down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration levels depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption through argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power 4 kW Display system: Dedicated microcontroller for each CCD Serial interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic checking and identification of alloy/grade Result manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: 80%, non-condensing Atmosphere: free of corrosive fumes and high dust levels Spectrometer: 90-253 V 50/60Hz Data max. 400 VA during sparking Fuse: 16 A slow-blow Version: Tabletop Depth: 750 mm Width: 625 mm Height: 450 mm Weight: 77 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility Iedsupyw Espfx Aa Eoaw The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) Iedpfx Asziyz Roa Ejaw The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Condition: excellent (used), Brabender Model: 920000 Brabender AQUATRAC® Station – Moisture Analyzer – Laboratory with Precisa Analytical Balance 0.1 mg – 120 g Iodpfxozix Ngo Aa Ejaw For sale is an AQUATRAC® Station by Brabender Messtechnik – a professional laboratory device for precise determination of water content in powders, granulates, and other solid materials. The device is ideally suited for quality assurance, research, and production, and is used worldwide in industrial and laboratory settings. Features: • Precise thermogravimetric moisture measurement • Integrated touchscreen • Internal data storage • USB and Ethernet interfaces • Robust industrial/laboratory construction Technical data: Model: 920000 Year of manufacture: 2019 Mains voltage: 85–265 V AC Frequency: 47–63 Hz Power consumption: approx. 0.6 kW Connections: 3× USB, Ethernet Dimensions: approx. 60 × 45 × 35 cm (W×D×H) Weight: approx. 30–35 kg Precisa Analytical Balance 0.1 mg – 120 g Description: For sale is a high-precision analytical balance from Precisa (Switzerland), 321 LS Series / Type 120A. The balance is ideally suited for laboratories, pharmacies, research, industry, or education. Thanks to the enclosed glass draft shield, very precise and stable measurement results are possible – even for the smallest weights. Technical data: Max weighing range: 120 g Readability: 0.0001 g (0.1 mg) Minimum weight: 0.01 g Digital display Tare function RS232 interface Power supply: 12 V DC / 6 W Condition: used Scope of delivery: (See photo) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), NITON XL3t 980 GOLDD+ – a portable X-ray analyzer featuring a next-generation SDD detector with GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional Si-PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, and P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without using helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral libraries of alloys enables the identification of stainless steels, tool steels, chrome-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, zinc alloys, zirconium alloys, and aluminum alloys. The analyzer provides very fast measurements. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys, such as: casting alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), Iaodpjzlcciofx Aa Ejw zinc alloys with aluminum (Al). The analyzer enables the analysis of: all alloys based on iron (0.00x% – 100%) and non-ferrous metals (0.00x% – 100%) as well as rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x% -100%). The NITON XL3t 980 GOLDD+ analyzer operates on BASIC PARAMETERS, meaning it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that allows you to assign a name, symbol, number, etc. to a known sample, and subsequent samples will be identified by this name B23Zpkshvo a program for quantitative chemical analysis (SuperChem Teach Mode) – based on your own standards, you can create your own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch screen. The screen is color and tiltable, which makes it easier to read the results while working in the field, integrated scanner, backlit alphanumeric identification codes for samples. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two, interchangeable batteries. One battery allows for continuous operation for 8-10 hours without the need for charging. It has two libraries: 900 and 800.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, volume flow: 3.2 m³/h, filter area: 21 m², noise level: 67 dB, total height: 2,000 mm, total length: 2,360 mm, total width: 900 mm, overall weight: 770 kg, compressed air connection: 6 bar, extraction nozzle diameter: 200 mm, The SPÄNEX dust extractor type SMU 32 / 45 BA with container and discharge is a compact disposal station for Iaedjt Ug Sgspfx Aa Esw disposal station for commercial use for installation in the work area. Consisting of: Dust extractor with vacuum-proof housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, high-performance radial fan arranged on the clean gas side with centrifugal fan with three-phase motor of energy efficiency class IE3 and integrated exhaust air sound attenuation and air outlet grille, charging container with 0.55 kW discharge device, a circuit with CEE appliance plug (phase inverter). The circuit is designed for automatic operation. The automatic start-up control for max. 6 machines and automatic cleaning of the filter with runtime addition are included. For the coils or potential-free contacts of the machine can be used for automatic start-up. can be used. Optionally possible: Conversion to chip collection container € 1,270.00 net alternatively: Installation of a branded rotary valve € 1,690.00 net

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data Ijdpfx Aeyzc D Uea Eoaw - Construction: Stainless steel frame for hygienic industrial use - HMI: Integrated touchscreen for operation, calibration, and product changeover - Electrical Data - Power supply: AC 230 V, single phase - Current: 11.0 A - Frequency: 50 / 60 Hz - Inspection Function - Detection of foreign bodies: - Metal - Glass - Stones - High-density plastics - Additional capabilities: - Product integrity verification - Detection of missing components - Density-based inspection

Condition: new, Year of construction: 2025, functionality: fully functional, New unit MASS International Rotary distributor SR Touchscreen control Motor 400V, 50Hz Iasdpszkr D Hsfx Aa Eew 360° working range Infinitely adjustable height and tilt Control via freely adjustable times or via potential-free contacts Adjustable discharge height 1100 – 1400 mm Adjustable feed height 600 – 900 mm Hopper width 500 mm, tapering to 200 mm Overall width 500 mm

Condition: refurbished (used), Year of construction: 2020, operating hours: 455 h, functionality: fully functional, machine/vehicle number: 1222275, warranty duration: 6 months, total height: 2,085 mm, total width: 1,225 mm, total length: 6,109 mm, type of input current: three-phase, overall weight: 1,570 kg, film width: 700 mm, compressed air connection: 6 bar, input voltage: 400 V, working height: 870 mm, year of last overhaul: 2026, input current: 14 A, Equipment: documentation/manual, safety light barrier, The ULMA FM 300 automatic flow pack machine was specifically designed to package fresh products in multilayer films under a modified atmosphere (MAP). This machine produces hermetically sealed “pillow-pack” flow packs in a pillow format. ULMA FM 30 The ULMA FM 300 automatic flow pack machine was specifically designed to package fresh products in multilayer films under a modified atmosphere (MAP). This machine produces hermetically sealed “pillow-pack” flow packs in a pillow format. Technical specifications Model: FM 300 Condition: Overhauled 2026 (fully functional) Year of manufacture: 2020 Performance: Up to 80 packs/minute (depending on film and product characteristics) with MAP. Packaging type: Flow pack Machine equipment Infeed conveyor length: Free infeed section 2135 mm Equipment features ✅ Wash-down infeed conveyor in hygienic design ✅ Motorized film roll holder (max. film width 700 mm) ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Signal for printer/labeler ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700 mm) ✅ Cross-sealing bar made of stainless steel with double tooth for mono films ✅ Squeeze sponge for controlling the pack volume ✅ No product/no bag function ✅ Synchronization signals for upstream and downstream equipment ✅ Gas analysis device Dan Sensor MAP Check 3 O2 & CO2 gas analyzer Iasdpfx Aozkry Uja Esw Documentation & Operation Language (documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 6,109 × 1,225 × 2,085 mm Shipping weight: 1570 kg (including transport packaging)

Condition: used, Industrial Dust Extraction System, Dust Collection Unit, CORAL POLIVAL 2 ADPE, Used Machine Manufacturer CORAL S.p.A. (Italy) Model POLIVAL 2 ADPE Technical Specifications Serial Number: 00000201 Rated Power: 4.0 kW Motor Speed: 2800 RPM (high-speed, high-suction fan) Operating Voltage: 400 V, Three-phase Construction: Weather-resistant, modular galvanized steel housing Extraction Surface: 3700 × 1100 mm Version: ADPE – designed for the safe extraction of potentially explosive fine dust Overall Dimensions Width: 3160 mm Depth: 1100 mm Height: 2010 mm Iodpezh H Ubofx Aa Eoaw Filter Unit Dimensions Width: 2930 mm Depth: 1100 mm Height: 950 mm

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 Iodpfxjzhub Ao Aa Ejaw - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: like new (used), Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned and milled parts. Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Iodpfox E Dncjx Aa Esaw Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Further options available… Machine is available immediately!

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine extraction systems for air volumes of up to 10,000 m³/h. can be used. Manufactured in accordance with the new EU standard EN 16770 they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of Ijdpfou T Hriox Aa Eoaw potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 180 mm, Volume flow: 2,610 m³/h, Nominal volume flow: 1,832 m³/h, max. negative pressure: 2,450 Pa, Filter area: 13.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 2 pieces, Motor: 3.0 kW, Dimensions (LxWxH): 2,085 x 900 x 2,130 mm, Weight: 414 kg, Sound pressure level: 76 dB(A), Dust class: M incl.: an attached control cabinet

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Iodpev Nhg Sefx Aa Eoaw Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW Ijdpovnri Iofx Aa Esaw 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 960702A20v3001, overall weight: 200 kg, total length: 1,115 mm, total width: 555 mm, total height: 450 mm, volume flow: 280 m³/h, power: 7.5 kW (10.20 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: AC, type of cooling: water, rotational speed (max.): 1,500 rpm, warranty duration: 12 months, protection type (IP code): IP55, Leybold Sogevac SV 300 B ATEX Cat. 2 INT Special1 GB – NEW, unused, immediately available We are offering a new Leybold Sogevac SV 300 B rotary vane vacuum pump with ATEX Category 2 (internal) and water cooling. The pump is no longer in its original packaging but has never been put into operation and is in technically and visually flawless, as-new condition. Ideal for demanding applications in the chemical, pharmaceutical, and food industries, as well as for all areas with potentially explosive atmospheres. Technical Data • Model: SV 300 B WATER ATEX Cat. 2 INT Special1 GB • Design: Single-stage, oil-sealed rotary vane vacuum pump • Pumping speed: approx. 240 m³/h (50 Hz) / 290 m³/h (60 Hz) • Ultimate pressure: down to 0.08 mbar • Cooling: Water cooling (min. 600 L/h, max. 30 °C) • Certification: ATEX II (i) 2G b IIB 180 °C (50 Hz) / T3 (60 Hz) – for indoor use • Operating temperature: Ambient 10–50 °C • Connection: 3-phase, IEC motor • Condition: As new, unused, not in original packaging Special Features • ATEX-compliant design for hazardous (explosive) atmospheres • Robust, long-lasting construction – ideal for continuous operation • Low noise and vibration • Integrated oil mist separator with automatic oil return • Maintenance-friendly due to easy access to all components Iedpjzkaw Ujfx Aa Ejaw Fields of Application • Chemical process engineering • Pharmaceutical production • Food processing • Packaging and drying processes • Laboratory and research applications • General industry with ATEX requirements Further Details: Price: On request Delivery: Possible / Collection by arrangement Scope of delivery: Pump, original documentation, accessories as per manufacturer

Condition: good (used), PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: KL1408 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs Iajdpfxjhr Su Dj Aa Eew

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal Iedpfohr Suyox Aa Eoaw -Type: EL1018 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

Condition: used, PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal, bus terminal -Manufacturer: Beckhoff, 4-channel digital output terminal -Type: KL2424 Iedpfx Aom Rk T Esa Eoaw -Number: 4 available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Condition: used, PLC control -Type: Simatic S7-300 -Digital output: SM 322, Iajdpfx Aaob Nkugo Eew -Potential green, 32DA, DC24V, 0.5A, -1 X 40 PIN., -Total current: 4A/group -Number: 13x available -Price: per piece -Weight: 0.4 kg