Used Used Lns Fox Ifs Absolute Ws 500, Year 2011, Oil Mist Extraction Unit, Internal No. 231315 for sale (90,743)

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Bsdoxxalnepfx Albewt Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: like new (used), Year of construction: 2016, Solid fuel boiler. Bwjdpfx Alsy S E Nzobst

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Bwsdey Shc Depfx Albot

Condition: used, Year of construction: 2010, machine/vehicle number: GA25, Used ROBINO & GALANDRINO WIREHOODER 14000 BPH - Year 2010Technical Specifications & Performance DataThe Robino & Galandrino RECORD 14000 is a high-performance wire-hooding machine engineered for consistent and precise application of wirehoods on glass bottles. Built in 2010, this second hand unit has been maintained in working condition and is well-suited to upgrade an existing used bottling line or expand industrial packaging capacity in beverage production. Its robust design and dependable mechanics enable stable, continuous operation at elevated speeds typical of modern bottling equipment.Machine Type: WirehooderManufacturer: Robino & GalandrinoModel: RECORD 14000Year of manufacture: 2010Production speed: up to 14,000 bottles/hourContainer types: Designed for Glass bottle handlingApplication: Wirehood application for sparkling beveragesElectrical supply: 400 V, 3-phaseFrequency: 50 HzNominal current (In): 4.15 AProtection (ICC): 20 AWiring diagram code: REC262Certification: CEAdvanced Automation & Control SystemsThe machine integrates an industrial electrical system referenced by wiring diagram code REC262 and operates on a 400 V 3-phase, 50 Hz supply. Designed with CE-compliant safeguards, the wirehooder supports reliable, repeatable performance with consistent wirehood placement and twist integrity. Safety interlocks and emergency-stop circuitry help protect operators during operation and changeovers. The unit’s design facilitates quick adjustments for bottle handling components, simplifying setup across compatible formats and maintaining high uptime on a modern packaging line.Production Line Integration CapabilitiesThis wirehooder integrates seamlessly downstream of corking and upstream of labeling within a glass bottling line. It is compatible with standard conveyor interfaces and can be synchronized with upstream and downstream equipment such as corkers, foil applicators, labeling machines, and secondary packaging systems. The RECORD 14000 supports continuous in-line operation or can be configured as a standalone station with appropriate infeed and outfeed conveyors. Its performance profile and interface flexibility make it an effective addition to beverage production lines focused on sparkling products packaged in glass bottles.Machine Condition & Maintenance HistoryThe unit remained in production until the end of March 2026 and is currently in working condition. It has been inspected, cleaned, and lubricated, demonstrating careful upkeep consistent with efficient line operation. The machine is available immediately, enabling rapid deployment and minimal downtime for facilities seeking to augment capacity or replace an older wire-hooding station.Operational Performance & VersatilityEngineered by Robino & Galandrino, the RECORD 14000 delivers high-speed wirehood application with stable bottle handling and consistent twist quality. Its construction supports sustaine... Bedpfjzvprlox Albjwt

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: Bwjdpfx Ajyw Ua Telbet We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: new, Oil mist filters Donaldson DMC-MMB, 7 units available / Oil mist filter Absolent A.mist10 Bedpfxey H Exfs Albswt

Condition: good (used), Year of construction: 2017, machine/vehicle number: 0381, Offer 25147 Technical Data: - Portable design suitable for CrNi steels - Air flow rate approx. 200 m³/h - Max. negative pressure 19,000 Pa Bwjdpfextatzex Albst - Filter surface area approx. 0.8 m² - Filter separation efficiency 99.9 % - Extraction connection 60 mm - Extraction hose 5 m - Water-cooled torch package with extraction function 4 m - Start-stop automatic - Dust drawer - Drive - Fan: 230 V / 1.1 kW - Required space approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Bedpfx Aljyrnciebjwt Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good Bwedpfxoy Dpfwe Albot

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm Bodpfxezlktpo Albewt -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: good (used), Year of construction: 2017, machine/vehicle number: 0371, Offer 25146 Bsdextapispfx Albjwt Technical Data: - Portable design suitable for CrNi steels - Air flow rate: approx. 200 m³/h - Max. negative pressure: 19,000 Pa - Filter surface area: approx. 0.8 m² - Filter separation efficiency: 99.9% - Extraction connection: 60 mm - Extraction hose: 6 m - EWM torch package, water-cooled with extraction function: 4 m - Automatic start-stop - Dust drawer - Drive – fan: 230 V / 1.1 kW - Space requirement: approx. W 650 x H 600 x D 250 mm - Weight: approx. 25 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Bwodpfx Aewmm H Rjlbjt Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2023, Equipment: CE marking, Nederman dust extraction system / silo dust collector with control unit and compressed air treatment Condition: very good, used for only 2 years from commissioning in 2023 to 2025, then dismantled due to factory closure. Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems. Design: compact steel construction with integrated filter module. Filter cleaning: compressed air cleaning. Mounting type: roof mounting on silo. Application: industrial dust extraction, bulk solids handling, environmental technology. Filter type: cassette dust collector Type: MEP-2-6 Year of manufacture: 2023 Fan manufacturer: Nederman Type: FMZ 620 Year of manufacture: 2023 Power: 3 kW EX-protected Control unit manufacturer: Nederman Type: DFC-08M Article number: 5512680 Year of manufacture: 2023 Pressure vessel manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Compressed air treatment: Camozzi MC202-D00 Maximum inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Maximum temperature: 50°C Bwjdpfxsyxvpfj Albst Electrical components: ABB control / connection housing Design: dust extraction system for silo applications with integrated filter unit and fan. Accessories / Scope of supply: Electrical control cabinet with control unit Compressed air treatment unit with pressure gauge Pressure vessel for pulse cleaning Fan with motor Pipe connection with weather protection grille Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany

Condition: good (used), Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation grille: louvered grille, Filter for oil mist separator -Material: aluminum Bwjdpfxji I Hc Hs Albjt -Total dimensions: 440/330/H345 mm -Weight: 13.8kg

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Bwodoylb Ixepfx Albet Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231656, HAAS DT-1 CNC machining center – manufactured in 2010 For sale is a HAAS DT-1 CNC machining center, manufactured in 2010, equipped with a 3+2-axis system, a Renishaw measuring probe, and a KUKA KR 5 sixx R850 WP. Bwedpjzwk Iwjfx Albst Technical data Manufacturer: Haas Model: DT-1 Year of manufacture: 2010 Machining: 3+2-axis Cycle time: 4,962 h Feed time: 3,079 h CNC control: Haas Chip conveyor: Integrated screw conveyor system Measuring probe: Renishaw Internal cooling (IKZ): present, currently defective Automation – KUKA KR 5 sixx R850 WP, control panel currently defective Dimensions of the robot cell Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 800 mm Dimensions including infeed and outfeed Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 2,400 mm The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: new, Year of construction: 2025, AL-KO Colour Jet 1 Paint Mist Extraction System Paint mist extraction system, ready for operation, with a 1 m² filter area including a pre-filter and a fine filter. Connection diameter: 300 mm, motor: 1.5 kW (suitable for installation in Zone 22 according to ATEX), switch: 1-stage, plus a 5 m cable with plug and throttle valve. Compact, space-saving steel sheet construction. Bwsdpfsbumr Ssx Albst Chassis with wheels. Indirect extraction near the floor. Completely pre-assembled. With connection cable and phase reversal device. Adjustable side panels. Optimized spray mist extraction through a patented front panel hood. Long filter life. High-performance fans with low noise levels. Filter wall with special mats. Exhaust nozzle with integrated throttle valve. Motor power: 1.5 kW Speed: 1400 rpm Nominal volume flow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (W = 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Bsdpfxewydgzs Albowt

Condition: used, Hydraulic pump, double internal gear pump, BOSCH REXROTH, type P2GH3/011 + GH3/013RE47 + 47U2-A502 ES hydraulic pump for TRUMPF TC 500 R, Trumpf original spare parts kit, no. 1737140, Bsdpfskpwu Hox Albjwt double pump, internal gear type, with hydraulic hoses suitable for machine: TRUMPF TC 500 R TRUMPF spare parts no.: 1737140 ES hydraulic pump Year of manufacture: NEW / unused, in unopened original packaging The kit consists of the following Trumpf spare parts: - 0348394 Double internal gear pump, BOSCH REXROTH P2GH3/011+GH3/013RE47+47U2-A502 - 0034257 Hydraulic hose 10.0 x 700 - 0105599 Hydraulic hose 12.0 x 730 Technical data for hydraulic pump: Manufacturer: BOSCH REXROTH Type: P2GH3/011+GH3/013RE47+47U2-A502 Material no.: R900969031 Maximum operating pressure: 350 bar Maximum displacement volume: 16 cm³ Size: 2 Package size L x W x H: 540 x 400 x 300 mm Package weight: 22 kg NEW / unused, in unopened original packaging, opened only for inventory purposes from stock, delivered by Trumpf in 2019 and not required.

Condition: used, Year of construction: 2010, machine/vehicle number: PR28, Used SACMI OIMA 350T injection molding machine - Year 2010Technical Specifications & Performance DataThis injection molding machine for PET preforms is a high-output cell engineered for beverage production and industrial packaging applications. Manufactured by OiMA, it combines robust clamping performance with precise injection control and a complete set of auxiliaries for reliable second hand operation within a used bottling line context.Manufacturer: OiMA S.p.A.Model: 6500.350Application: PET preform production for beverage packagingClamping force: 350 tonInjection volume: 4500 cm³ per 100 MPaInstalled power: 436.58 kWPower supply: 400 V, 50 HzMachine mass: 20,000 kgPress year: 2014Mold: SACMI PPM 072 H, 72 cavities, 34 g preforms, neck type Alaska Blue PRE 342Year: 2010Mold temperature: 8–12 °CMold mass: 9,720 kgAuxiliaries included: Sytrama REV 156 PET take-out robot; Plastic System dehumidifier; Plastic System hopper H6000H; Plastic System mold-area dehumidifier DSH 2004 MIC DISP; conveyor; palletizing systemMaterial processed: PETAdvanced Automation & Control SystemsThe cell integrates a Sytrama REV 156 PET robot for automatic take-out and part handling, supporting stable cycle times and consistent product quality. The machine is equipped with an electric charging unit and hydraulic accumulators for fast, repeatable injection phases. Operator-friendly controls and interlocked safety guards help streamline setup and routine operation.Automated take-out and transfer via Sytrama robotAccumulator-assisted injection for stable, fast cyclesIntegrated dehumidification and material handling for resin conditioningElectrical specifications: 400 V, 50 HzEngineered for quick, repeatable mold changes and efficient maintenance accessProduction Line Integration CapabilitiesThis injection cell can operate as a standalone preform production unit or be integrated upstream of stretch blow molding in a PET production line. The included dehumidifiers, hopper loader, conveyor, and palletizing system simplify in-plant logistics and align with broader bottling equipment and packaging machinery workflows.Standalone or inline operation with PET packaging linesDehumidification and hopper loading optimize PET resin preparationConveyor and palletizing system support downstream handling and warehousingIdeal for beverage production environments targeting consistent preform supplyMachine Condition & Maintenance HistoryThis second hand injection molding machine is presented in operational condition and ready for immediate use after standard site preparation and commissioning. The core press is year 2014, with the SACMI mold and auxiliaries from 2010, providing a balanced mix of robust mechanics and proven proce... Bwjdpfx Alszktdbjbjt

Condition: like new (used), Year of construction: 2008, machine/vehicle number: IntNr231640, LTA AC 3001 _E120 Infinitely variable fan speed control (0-10V in the 230V version) · Low energy consumption thanks to filter elements with minimal pressure loss and energy-efficient fans · Filtration stages for the separation of coolant mist · Mechanical solid particle filter · Suitable for use with oil/emulsion mist · High-voltage generator with two pre-programmed voltage levels · Direct mounting on the machine is possible · Separation efficiency of up to 99% - Dimensions (L x W x H): 1130x625x610 mm - Weight: 135 kg Bwodpfx Aljzx Rt Njbot Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA-certified welding fume extraction unit Bwedpfx Ajhw Ev Sjlbjt - Articulated extraction arm 3000 mm - Airflow rate approx. 1000 m³/h - Max. static pressure 2700 Pa - Filter area approx. m² - Filter control indicator for filter replacement - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 9725, SPECIFICATION Table size 1070 x 230mm Longitudinal traverse 660mm Cross traverse 250mm Vertical traverse 380mm Quill travel 125mm Quill feeds 0.038 – 0.152mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50 – 3500rpm Approx. weight 950Kg Machine in Metric execution Bwedpfxsy Uuuxj Albst MACHINE EQUIPPED WITH Newall Topaz 2 axis DRO system Low voltage halogen worklight Guarding Coolant system

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Bedswv T R Ujpfx Albjwt Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Bjdpow Ag Ndofx Albowt Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.