Used Smyth F 150 L for sale (80,427)

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670x1,250x1,200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW Gjdpfx Akjiky H Seyobu - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max. power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hour counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, tachometer, generator and spark plugs - Emergency stop button ELECTRICAL CONTROL: - Wind/unwind hydraulic hose reel; - Bypass on/off; - Speed control +/-; - Emergency stop button; - Switch to wireless remote control; INSTALLED ALARM: - Low water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose - Hose: 80 m ½“ high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration rate: 50 Mesh INCLUDED IN DELIVERY: - Multifunctional wireless remote control IMET; - Engine on/off; - Bypass on/off; - Speed control +/-; - Wind/unwind hydraulic hose reel; - Emergency stop button; - Battery charger for wireless remote control; - 400 or 800 l water tank (with steel frame) made of polyethylene; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½“ high-pressure hose; - 50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to the water hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint and quick coupling; - High-pressure lance kit with flat spray nozzle 15° / rotating nozzle; - Lance kit for high flow; - Rotating nozzle kit; - Double nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning unit; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Condition: excellent (used), mileage: 508,877 km, power: 110 kW (149.56 HP), first registration: 09/1991, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, Year of construction: 1991, Tail lift: Yes WVML044053G070621 = More information = Empty weight: 5.260 kg Carrying capacity: 5.140 kg GVW: 10.400 kg Technical condition: very good Visual appearance: very good Registration number: 1WBE674 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Gedpfx Aoymrvpokyjbu If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025/002, Finger jointing machines and lines are a masterpiece of woodworking industry >wood entry lengths 900 to 6100 mm< >wood rests and tools drive< >Best tooth milling quality and optimized cutting speed< >Long service life of the milling tools / dovetail cutters< -MINDA - MACH I (patented) -High performance finger jointing line -for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min -vertical and horizontal joints possible max. 200 x 300 mm -extremely flexible; short set-up times; reliable operation Gjdpfx Akocbyp Njyebu The only package system in the world that can also process a single board or single beam. -finger jointing machine, for vertical and horizontal milling, zinc profiles, made in Germany, along with new developments in the clamping stations and the transfer channel on the router table, has the Joema MACH I include a groundbreaking benefits, fast pace. Together with 1200 mm milling channel at 40 mm Thickness technical power meter = approx 150 meters /min, very reliable material transport - No vulnerable conveyor rollers, flaps and cross conveyors - high availability - for all sections including square suitable - by fully automatic, continuous channel matching is possible in extreme cases single mill - thus the system is extremely flexible, vertically horizontally and zinc profiles possible performance with KVH 160 x 280 mm are 38 meters / min, with KVH 100 x 300 mm, 64 meters / min, at BSH 45 x 250 mm are 110 meters / min, >>cutting-edge technology simply kept

Year of construction: 2020, condition: used, This listing is for the Labogene ScanLaf Mars 1500 Class II biological safety cabinet The unit is in full working condition and ready for immediate us The Labogene ScanLaf Mars 1500 is a Class II biological safety cabinet designed to provide operator, product and environmental protection. It features HEPA filtration, vertical laminar airflow, motorised front window and adjustable lighting. The working width is 1500 mm and the cabinet is manufactured and tested to EN 12469 requirements. External dimensions are approximately 1604 x 797 x 2033 mm and weight is approximately 275 kg, excluding the stand. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Gsdpfxjz D Dl Te Akyebu By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: as good as new (ex-display), Year of construction: 2026, PTC JTR-C Cold Water Trailer – similar to, but not a Dynajet, Oertzen, Falch, ROM, Rioned, Karo, etc. - Single-axle trailer with a hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, taillights and reflectors, tow hitch for 50 mm coupling, 13" tires and ABS. The following cold water models are available: JTR-C 60/200 | 60 l/min at 200 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/150 | 75 l/min at 150 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/210 | 75 l/min at 210 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 84/190 | 84 l/min at 190 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 102/150 | 102 l/min at 150 bar | Engine: Kohler KDW 2204 37.5 kW Engine type: TIER III (Kohler) or Stage V (Yanmar) Gbodpofdkbgofx Akyju - Dimensions: 3,370 x 1,640 x 1,540 - Unladen weight: approx. 600 kg - High-pressure pump: HPP - HD hose reel: fixed and manual or hydraulic with a maximum of 100 m of 1/2" and 60 m of 3/4" hose (included) - Water supply hose reel: manual with 50 m of 3/4" hose - Water tank: 600 l - Options such as remote control, warning light, work light and accessories available upon request.

Condition: used, Year of construction: 1984, Used Horizontal borer TITAN AFL 150 CNC CNC Heidenhain Godpfx Akob Hv Twjyobu - X column - 9000 mm; - Y vertical - 2000 mm; - W spindle - 900 mm - Z column cross - 600 mm - spindle speed 900 rpm - spindle dia. 150 mm - Machine weight aprox. 50 tons Floor plates 2 pcs. 2000x6000 Rotary table Skoda E20

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Gsdpfezw Ragjx Akyjbu Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: used, Year of construction: 1998, Manufacturer: 3C France Year : 1998 Type : Process skid with 1 reactor / vacuum mixer and 1 melting tank Previous application: pharmaceutical (coating solution)   A – Reactor / Main vessel Total volume: 1142 litres Pressure: – 1 / 2.4 bars Temperature : 144 °C Jacketed volume: 98 litres Pressure: 2.5 bars Temperature : 142 °C Mixel agitation: 2 deflocculators Ø260 mm Motor : 11 KW (1500 rpm) Sample intake Washing ball Level probe Inspection hatch, porthole, light   B – Melter Total volume: 152 litres Pressure: – 1 / 2.1 bars Temperature : 114 °C Jacketed volume: 24 litres Pressure: 2.5 bars Temperature : 148 °C Agitation: 1 tank bottom deflocculator Ø125 mm Motor: 2.2 KW (3000 rpm) Washing ball Level probe Sample intake Inspection hatch, porthole, light Gbodpfxjx R Di Rj Akysu   Additional accessories : – Dosing pumps – Circulation pump – Flow meters – Controllers – Electrical cabinet with PLC and speed drives   Access footbridge Batch of spare parts available (gaskets, seals, etc.) Full documentation in digital format  

Condition: new, Year of construction: 2026, functionality: fully functional, Edge grinding machine KSO 150 F PRO – NEW Scope of delivery: Grinding belt K 100, 5 x rubber rollers ø25, ø30, ø40, ø45, ø50 mm, 6 x grinding sleeves K80 ø25, ø30, ø35, ø40, ø45, ø50 mm, On-board tool, Miter stop Grinding unit can be swiveled manually using a hand crank, Machine stand made of welded steel, Oscillating grinding belt with separate gear motor, Oscillation can be switched on or off, Grinding platen with graphite coating, Height-adjustable grinding table, Additional table with dust extraction openings, Grinding sleeve attachment with attached work table, Adjustable stops 2 pcs. dust extraction nozzles ø100 mm, Size of work table: 950 x 450 mm, height adjustment 110 mm, 400 V, motor power 2.2 kW, oscillation motor 0.11 kW, Grinding belt length 2640 mm, width 150 mm, Belt running speed 14 m/s, Grinding area length 800 mm, width 150 mm, Oscillation stroke 15 mm, Swivel angle of grinding unit 0-45° Machine size 1750 x 1050 x 1200 mm, Weight 310 kg NEW PRICE, MSRP 11,050 € Gedpfxoyxqtfj Akysbu Available for immediate delivery Transport possible for an extra charge!

Condition: used, Year of construction: 1986, functionality: fully functional, pressing force: 150 t, total length: 1,690 mm, total width: 1,440 mm, total height: 2,800 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 150 t Oil volume: 480 l Aftertravel: 30 mm Safety distance: 180 mm MACHINE DETAILS Total power requirement: 18.5 kW Dimensions & Weight Gsdpfx Akjzk A Ucjyobu Dimensions: 1440 x 1690 x 2800 mm Machine weight: approx. 4200 kg

Condition: used, Year of construction: 1991, power: 74 kW (100.61 HP), fuel type: diesel, number of cylinders: 6, rotational speed (min.): 2,150 rpm, incl. hydraulic pump and tank Gbsdpfjtphvbjx Akyou

Condition: used, loading : 75 to 80 % 2,77 kW tiltable drum with 2 arms pneumatic: 6 bar outside dimensions (l x w x h) : ± 2.110 x 1.100 x 1.650 mm Gedez Ahfwjpfx Akyobu

Condition: used, color: other, Year of construction: 1996, Serial number: 27 10.723.235 Gsdpeucvpvsfx Akyebu We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Equipment: - Multiplex walls - 6 lashing eyes - Welded frame Gjdozu N Evjpfx Akyobu Net price: €4,235.29 / Gross price: €5,040.00 Article number: SPL115301515.21 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-1 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 300 x 150 x 150 cm • Exterior dimensions (L x W x H): 435 x 198 x 208 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,500 kg • Tare weight: 550 kg • Payload: 950 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and multiplex walls • Reinforced, sturdily screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members are continuous • Frame is very torsionally rigid due to its stable construction • 6 lashing eyes recessed inside on the side edge (1000 DaN/kg) TÜV certified! • Battery-powered interior light for flexible positioning • 2-leaf rear door with stainless steel rotating latch, lockable • Continuous interior height: approx. 148 cm • Continuous interior width: approx. 142 cm • 2 maneuvering handles at the front • Maintenance-free rubber spring axles from KNOTT • Reverse automatic • KNOTT overrun device and parking brake • Very stable, screwed V-drawbar • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, Year of construction: 2025, Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. - Specifications: stainless steel (SS304) version; filling range: 10-1500g; accuracy: +/- 0.3-1%; suitable for: metal cans, glass bottles, plastic jar, paper bags, etc.; container dimensions: diameter 40-130, height 80-220mm with different can feeding screws; max. speed of the machine in neutral: 60 fillings/min; power: 220V, 2.0kW; machine dimensions: L1850xW1366xH2100mm; 260kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gedpfx Akjv Nk N Nsyjbu

Condition: good (used), Pressure vessel, pressure tank, pressure vessel, -Pressure tank: Stainless steel compressed air tank -Contents: approx. 1.5 liters -Item No.: 4541 ABD10 190 -Number: 19 containers available -Price: per piece Gbodpfszucb Dox Akyou -Dimensions: 385/150/H105 mm -Weight: 4.2 kg/pc.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - 6 lashing points - Welded frame - Multiplex walls Net price: €4,869.75 / Gross price: €5,795.00 Article number: SPL220301518.22 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 300 x 150 x 180 cm • External dimensions (L x W x H): 435 x 198 x 238 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,000 kg • Unladen weight: 688 kg • Payload: 1,312 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and walls made of multiplex • Reinforced, robust, screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal beams are continuous • Frame is very torsion-resistant due to its stable construction • 6 lashing eyes recessed inside on the side edge (1000 DaN/kg), TÜV certified! • Battery-powered interior light for free positioning • Tailgate with gas springs and anti-slip surface • Continuous interior height: approx. 178 cm • Continuous interior width: approx. 142 cm • 2 maneuvering handles at the front • Maintenance-free rubber spring axles from KNOTT • Reverse assist • KNOTT inertia coupling and parking brake • Very stable, screwed V-drawbar • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Gbodpfezu N A Ijx Akyeu Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, Type: S 150 l Gbjdpfxoh Dp Sbj Akyeu Complete stainless steel Hopper capacity 150 liter Single working shaft with paddles Rotation of shaft in both directions Automatic stopping when cover is open Electric power: 2.2 kW Voltage: 380 V / 50 Hz Installation dimensions of machine in cm: Width: 100 Lenght: 60 Height: 100 Delivery time: after advanced payment, one working day

Condition: used, Year of construction: 1982, Toyota fd15 Bj 1982 Hours Gedpfx Aksyvt Dboyobu

Condition: new, Bottom blocks / crane hooks / hooks – 53 pieces: Bottom block – 40 tons for DH / DR / DMR (price and photos on request) Bottom block – 32 tons for DH 2000 / P2000 (price and photos on request) 1. Bottom block – 20 / 25 tons – (1 piece). 2. Bottom block – 12.5 tons – (1 piece). 3. Bottom block – 12.5 tons (without hook safety latch) – (1 piece). 4. Bottom block – 10 tons – (2 pieces). 5. Bottom block – 6.3 tons – (1 piece). 6. Bottom block – 12 / 10 tons / 6.3 tons / 3.2 tons / 2.5 tons – (3 pieces). 7. Bottom block – 5 tons / 3.2 tons – (2 pieces). 8. Bottom block – 4 tons (2 pieces, unused with storage marks). 9. Bottom block – 3.2 tons (2 pieces, used). 10. Bottom block – 2.5 tons, without hook (2 pieces). 11. Hook for chain hoists – 2 / 2.5 tons (1 piece). Abus bottom block / hooks: 1. Abus bottom block – 30 tons (used). 2. Abus bottom block – 12.5 tons (new, without hook safety latch). Konecranes bottom block – 5 tons (used). Hook – 150 tons (2 pieces, new). Hook – 40 tons (1 piece, new). Gbsdpfxjyvvbce Akysu Hook size no. – 2.5 (1 piece). Hook – 15 pieces. Hook – 12 pieces. Hook – 15 pieces.

Condition: new, Year of construction: 2026, The CORMAK 150-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Gbsdpfx Ajzwlm Uskyeu Key Advantages of the 150 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 150-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating

Condition: ready for operation (used), Siemens 6SL3210-5HE15-0UF0 S210 Servo Drive Version: 03 SN: T-P76031605, mint condition, never in operation, 100% functional, scope of delivery as shown in photos. The agreed sales discounts do not apply to this item. Please inquire separately for the price! Gjdpsxahbtefx Akyebu

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Gsdpfxsychbao Akyobu Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, GMN TSE 60cg x 315 / 36000 spindle Serial number: R342532 + GEORGII KOBOLD KOD 425 / XF / W / S17 / S150 / X ID: 1004820005-1 motor Serial number: 660229, unused, 100% functional, scope of delivery as per photos! With storage marks! Gbedpfjx Dt U Tex Akysu

Condition: new, GMN TSE 60cg x 315 / 36000 spindle Serial No.: R322240 + GEORGII KOBOLD KOD 425 / XF / W / S17 / S150X ID: 1004820005-1 motor Serial No.: 585838 1.50 22400-33600/min 400-600 Hz, unused, 100% functional, delivery as per photos! With storage marks! Godpfx Aksx Duadoysbu