Used Screw Stage for sale (7,760)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Bedpezu Aibjfx Amrsdh Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 2016, operating hours: 22,314 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 513 m³/h, pressure (max.): 8.6 bar, type of cooling: air, Oil-free screw compressor, Atlas Copco ZT55VSD Bdedpfx Aozwdt Tomroh Inverter integrated 55 kW 8.6 bar 8.55 m³/min Year of manufacture: 2016 Operating hours: 22,314 h

Condition: used, Two-stage compressor Bitzer -Type: S6F-30.2 -Volume: 101.1 m3/h -Cooling capacity for R404A: 35.7 kW at -30°C/40°C, 25.3 kW at -40°C/40°C -Items in magazine: 2 Bodpfx Amozxy Uiersdh -Reference number: S 256 -Condition: Used in very good condition, ready to work

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge Bsdpfx Amszxxiferjdh *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: new, Screw compressor AGRE Model Sonetteo 7.5+ 10 Compact screw compressor unit including refrigerant dryer and compressed air tank, 270 liters. Belt-driven. Space-saving. Economical. Easy operation thanks to the Infologic² Basic control system. Efficient compression stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control system: Infologic² Basic control unit Refrigerant dryer: Installed, refrigerant R513A Tank: 270 liters, horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 liters/min Bsdpfshun Tzex Amredh Including time-controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: excellent (used), Year of construction: 2002, PROD. KAESER TYPE CSD102T / 100304.0 S/N 1049 YEAR 2002 POWER (kW) 55 OUTPUT (m3/min) 10.1 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes Bedpfozwnykox Amrjdh HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: like new (used), Year of construction: 2026, functionality: fully functional, overall weight: 1,080 kg, total length: 2,200 mm, total width: 1,300 mm, total height: 2,100 mm, power: 22 kW (29.91 HP), Frequency-controlled screw compressor, 22 kW, 4-in-1 With compressed air treatment for laser applications Attached refrigeration dryer Integrated 4-stage fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 2.3 m³/min at 1.6 MPa Bdedpfezw A Tfex Amreh Integrated pressure vessel, approx. 550 l

Condition: excellent (used), Year of construction: 2013, overall weight: 403 kg, volume flow: 2.2 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, input voltage: 400 V, ATLAS COPCO GA 15 screw compressor Bjdpfx Amjzxzvnsredh Atlas Copco screw element 15 kW motor Capacity: 2.20 m3/min Pressure: 10 bar Year of manufacture: 2018 Operating hours: 10412 hours Compressor in fully working condition.

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Bdjdpfx Ajvmivcjmrjh Without guarantee - without warranty -

Condition: new, Year of construction: 2019, functionality: fully functional, Air filter cartridge 6.3540.0 Original Kaeser spare part Suitable for Kaeser compressors: AS 47, M57, M36, M45, M64, M52, M76, M80, M81 Bdsdpfx Amsvkfyrjroh From stock We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2014, functionality: fully functional, Oil separator cartridge 6.2013.0 Original Kaeser spare part Suitable for Kaeser compressors: Bjdpfxsvkfzcs Amredh CS 75, 76, 90, 91, 120, 121 From stock We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Bdsdpsvk R A Sefx Amrjh Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2017, feed pressure / bar Bodexy S H Topfx Amredh liter capacity / l Air consumption / m³/h

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price Bdodpsc Rukwsfx Amroh 1x venting port new control board optional - equipment against additional price: screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar Bdedpohabk Djfx Amrjh -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Bdsdpfeiyya Asx Amrsh Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm Bedpfx Amsqy E Evsrjdh - Drive: Siemens motor, 95 kW - Volumetric K-Tron metering system - Degassing zone - Optionally with die head - Control system Optionally with strand granulator, water bath, etc. Inspection possible by arrangement.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, power: 15 kW (20.39 HP), operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 16 bar, noise level: 62 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar specifically designed for the high demands of laser cutting, providing clean compressed air (also available with 22 kW) complete 4-in-1 unit frequency-controlled servo motor 500-liter pressure tank refrigerant dryer fine filter new machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. highly efficient, permanent magnet servo motor frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit Bsdpfeyll Enox Amrodh air-cooled durable and low-maintenance optional: also available with an additional adsorption dryer Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria. technical data (approx.): length: 1.75 m, height: 1.75 m, width: 0.72 m weight: approx. 420 kg pressure: 16 bar flow rate: approx. 1.7 m³/min at 10 bar (1.2 m³/min at 16 bar) noise level: 62 ± 2 dB(A)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Bjdpfx Amjzy Spzsrsdh

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Bdjdpjyhd Dbsfx Amrsh Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: used, Assorted lot of progressing cavity pumps from various manufacturers (Netzsch, Bornemann, Seepex, etc.), mostly in working condition – but some are not. These pumps were removed from service during ongoing operations. Bdsdpfxeilu Uqo Amrsh To be sold only as a lot.

Condition: used, Machine: Discharge Screw, Screw Conveyor, TSF 315 Solid Body Screw, second-hand Manufacturer: Askania Mass: 495 kg Year of construction: 1996 Bedpfxsrl Sv So Amredh Length: 5,20 m Ø auger: 350 mm Weight: 435 kg Speed: motor 1400 rpm / gearbox 53 rpm Engine power consumption: 2.2 kW Gear oil: 1.8 l Material: Housing > galvanized steel, auger > mild steel / cover > stainless steel

Condition: used, Machine: screw conveyor, screw conveyor, hollow screw conveyor Length: 8.10 m Ø screw: 500 mm Bdedpfxorn T Uro Amroh Manufacturer: IEM Fördertechnik Type: Solid body screw conveyor, supported on both sides, without motor

Condition: used, Solid body auger: Steel with bearings on both sides Diameter: 330 mm Housing: galvanized steel and painted sheet metal (hopper) Manufacturer: ROEDER Type: TS 315 Year of construction: 1992 Bdedsrt T Alspfx Amrjh Gearbox: SK 22-100 L/4 , 59 1/min max. 302 Nm Length: 3,40 m

Condition: good (used), Year of construction: 2015, operating hours: 1,562 h, load capacity: 3,000 kg, lifting height: 6,300 mm, fuel type: electric, mast type: triplex, construction height: 2,550 mm, empty load weight: 5,135 kg, mileage: 1,562 km, Electric triple forklift Bdsdpfxozvralo Amroh Brand: Heli Year of manufacture: 2015 Only 1,562 operating hours Capacity: 3,000 kg Lifting height: 6,300 mm Mast height (fully raised): 2,550 mm Equipped with FREELIFT, sideshift, and fork spreader Battery from 2015, including charger and automatic filling system Watch the video on YouTube.