Platform / stage / performance

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1.073.14, TECHNICAL DETAILS Infeed table length: 8,360 mm Outfeed table length: 2,750 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,400 x 2,400 mm Weight: 2,500 kg Transport packages: 3 units Voltage: 400 V Fuse: 25 A Codpfx Abjygilhjbogn Power: 11.0 kW EQUIPMENT Automatic feed system

Condition: used, Year of construction: 2002, turning diameter 820 mm turning length 2.000 mm control SIN 810 D center height over square guideway 400 mm turning diameter over slide rest 500 mm x-travel 540 mm z-travel 2.100 mm feed x/z-axis 0,01 - 50 mm/min rapid traverse X-axis 5,00 m/min rapid traverse Z-axis 10,00 m/min feeding force facing 12.500 N power feed longitudinal 20.000 N spindle turning speed range 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1 6,40 - 376 1/min. spindle turning speed - gearbox stage 2 27,40 - 1.600 1/min. power capacity at 60% / 100 % load 46,00 / 37,00 KW max. torque at 60% / 100% load 5.073 / 4.069 Nm constant cutting rate 1 - 9.999 m/min. spindle head DIN 55027 - Size 11 spindle diameter in front bearing 170 mm Cedsw Dvipjpfx Abbjgn spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 125 mm quill stroke 280 mm thread pitch 0,1 - 400 mm total power requirement 35,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 6,00 x 3,00 x H2,60 m SIEMENS Sinumerik 810D mcontrol, chip-conveyor, tail stock, dust exhauster, 2 pc. steady rest. Machine can be inspected under power.

Year of construction: 2003, operating hours: 70,263 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-21425, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Cgedpfx Aeyf Dr Hebbon Weight: 182 kg Operating hours: 70,263 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Gripper function: tilt forwards-backwards 0–90° Gripper function: rotate left-right +90 / –90° MACHINE DETAILS Battery voltage: 12 V Battery capacity: 70 Ah EQUIPMENT Cedpfjyf Dqisx Abbogn Cable drum gripper SG 600 Du-Hy/So Note: The machine is sold without charging plug, battery, and charger.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 12/2027, working width: 180 mm, conveyor belt width: 180 mm, type of input current: AC, total width: 280 mm, total length: 475 mm, total height: 280 mm, Roller for bread roll stamping Sinmag Model: Piccolo Dough portion approx.: 20 to 80 grams (depending on dough hydration) Maximum output: 2,000 pieces/hour Simple, robust technology Maximum long rolling width: 180 mm DGUV V3 tested—only with us Connection: 230V Dimensions: 280 x 475 x 280 mm (W x D x H) Brand new machine, SAB certified 24-month warranty + spare parts service Options: Delivery service Maintenance contract Service package Training & commissioning Leasing & rental service Cgodpfoqy A Swox Abbsn More top bakery machines in stock!

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 21 kg, Auction of a Plymovent KUA-2/H! MACHINE DETAILS Cjdpfx Aoyf Dnhjbbsgn Net weight: 21 kg

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, overall weight: 171 kg, total length: 1,200 mm, total width: 1,200 mm, total height: 1,300 mm, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,300 mm Weight: 171 kg Connected load: 400 V Refrigerant: 95 g / R134a Cgjdpfx Asyf Ddpobben Compressed air supply: 5-8 bar EQUIPMENT Printer: Star DP8340S

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2522021, laser hours: 100 h, laser power: 30,000 W, sheet thickness steel (max.): 60 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 15 mm, positioning accuracy: 0.1 mm, workpiece weight (max.): 1,000 kg, total length: 3,000 mm, total width: 1,500 mm, Shipping and possible presentation of the machine in Germany, Schlierbach. Technical specifications: Machine: Eagle iNspire 1530 30kW Laser source: Model YLS-30000 CW Workspace: 1500mm x 3000mm Year of production: 2021 Laser power: 30,000W The machine includes the following options: PRODUCTION SET - The production kit is prepared according to the machine series, laser power and set of consumables necessary to start production immediately. TRANSVERSE CONVEYER - The conveyor transports scrap and small parts to a container next to the laser. This enables you to recover small cut parts and to keep the bottom of the machine tidy. CONTAINER FOR SCRAP UNDER PALLET CHANGER - All scraps coming from small contour cutting can easily fall into it, helping to keep the area around the machine clean. MANUAL FASTENING OF SHEET METAL - This system allows fixing the metal sheet on the processing bench. This is a particularly useful option for the processing of thin, small, and not full metal sheets. It helps prevent shifting of the material being processed and dampens the generated vibrations, especially during high pressure cutting using N2 MYE2DROP - The camera located in the machine allows the operator to position the selected parts to be cut on the material, regardless of their shape. While the machine is cutting a given program, the operator can set parts to be cut on the sheet metal remnants on the pallet outside without interfering with the ongoing program. After exchanging the pallets, the laser will start cutting the design set by the operator, increasing system performance, and minimizing downtime. Eagle ANCCaM 36 - The system is equipped with 36 nozzles that can be stored and reused many times as needed. MYECAT - Improve edge quality on plates thicker than 8mm, this technology enhances accuracy for piercing and cutting small contours on high thicknesses in any position. MYEBOOST - Fly cutting and fast cutting of thin and medium sheets, which reduces the piercing time to an absolute minimum. MYEMIX 2.0 - Increases the quality and cutting speed of medium thickness mild steel and aluminum sheets by automatically changing between 3 gases MYESPOT - System designed for rapid edge finding which reduces sheet location process by up to 4 times. Preparation for automation Cjdswphltjpfx Abbjgn Aluminum Safety Kit - Aluminum dust mixed with dust resulting from other materials can be explosive and poses a fire threat. This option allows you to cut aluminum alternately with other materials in the safest way. Shipping and possible presentation of the machine in Germany, Schlierbach. For more information, please contact us directly at e-mail.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, total width: 1,120 mm, total length: 1,240 mm, overall weight: 450 kg, load capacity: 150 kg, inner diameter: 220 mm, TECHNICAL DETAILS Load capacity per spool: 150 kg Inner diameter: 220 mm Inner belt width: 200 mm Cgodpfxeyf Dbue Abbsn MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,240 x 1,120 x 2,200 mm Weight: 450 kg EQUIPMENT Wiring diagram

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 100,000 g, TECHNICAL DETAILS Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Max. fill weight: 100 kg Max. fill volume: 25 dm³ Cjdpfxoyf A U Hj Abbsgn MACHINE DETAILS Voltage: 230 V Max. power consumption: 100 VA Dimensions (L x W x H): 800 x 900 x 900 mm EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds.

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Cedpfewwt Trox Abbogn Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, overall weight: 130 kg, total length: 1,200 mm, total width: 780 mm, total height: 1,280 mm, Equipment: foot remote control, TECHNICAL DETAILS Grommet size: 4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 780 x 1,280 mm Net weight: 130 kg EQUIPMENT on castors with foot switch Note: The machine is sold without a riveting head. Cgsdpfx Asyf A S Eobben

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, High-lift truck with cable reel gripper SG 600 Du-Hy/So! TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Codpfx Asyf A Nqobbogn Tilting forward-backward: 0° to 90° Rotating left-right: +90° to -90° MACHINE DETAILS Battery: 12 V, 70 Ah EQUIPMENT Gripper function Note: The truck is sold without a charger.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2025, DGUV certified until: 12/2026, working width: 500 mm, conveyor belt width: 500 mm, type of input current: three-phase, total width: 840 mm, total length: 700 mm, total height: 1,380 mm, Wrapping Machine Universum Kasper Model: HWM 50 Portable croissant wrapping machine suitable for all stick-shaped products such as Kornspitz, pretzel sticks, etc. Universal dough wrapping machine for all doughs suitable for wrapping. Dough weight approx. 20 to 400 g. 500 mm belt width. Connection: 400V, 1 kW, 16A-CEE plug. Refurbished used machine with warranty. Options: Feed belt EB, service package, E-box, delivery service, maintenance contract, training & commissioning. We offer a large selection of croissant wrapping machines! Csdpfxev D Tl No Abbsgn

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total length: 1,600 mm, total width: 1,360 mm, overall weight: 430 kg, load capacity: 30 kg, pump capacity: 80 l/min, TECHNICAL DETAILS Load capacity: 30 kg Cgsdpfx Ajyf A I Hebbjn Pump capacity: 80 l/min Tank volume: 2 x 150 l MACHINE DETAILS Voltage: 400 V Power consumption: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,360 x 1,560 mm Weight: 430 kg