Used Rps Flexy Fas 064 for sale (1,050)

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. Hsdjt N Ty Tepfx Amyor ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: used, Year of construction: 2008, Suitable for cleaning cooling oil for grinding hard metal. container content: approx. 500 l Filter performance: approx. 180 l/min Filter fineness: >0.003mm Hsdpfsuxnmujx Amysr Connected load: approx. 4 kW (400 V/ 50Hz) Dimensions: W x D x H approx. 1600 x 1000 x 1000 mm weight: approx. 1000 kg mass: about 1000 kg colour: light gray

Condition: used, Year of construction: 2015, Front cutter Kolbus FA 650 Year: 2015 Description: - TFT Touch screen - Opening by suction belts - Cutting unit - Knife pre-setting device - Throughfeed Max. mechanical speed: 4.000 cycles/h Maximum size (uncutted): 480 x 375 x 50 mm Minimum size (uncutted): 125 x 105 x 3 mm Maximum size (cutted): 480 x 350 x 50 mm Minimum size (cutted): 125 x 100 x 3 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Hjdpfx Amsyzm T Tjyer

Year of construction: 2003, condition: good (used), machine/vehicle number: FA/07/RE/1612/3, For sale: Complete industrial extraction system consisting of 6 Colt Coltair roof fans, including the corresponding control cabinet/central control unit. This system was used for ventilation and extraction in a warehouse measuring approximately 90 x 25 x 12 meters and has been decommissioned in working condition. The entire set has been professionally dismantled and is preferably sold as a whole. The fans are suitable for, among other things: - Welding fume extraction - Fume extraction - Ventilation of workshops and warehouses Hodpfx Amoy Hw Avjyer - General industrial air exchange Technical data per fan Brand: Colt International Ltd Product: Coltair Fan Unit Type: FA/07/RE/1612/3 Power supply: 400V Motor: 3-phase Output: 0.60 / 0.40 kW Speed: 900 / 650 rpm Capacity: 3.62 / 2.85 m³/s Converted per fan: approx. 13,032 / 10,260 m³/h Total capacity for the complete set Approx. 78,192 m³/h on high setting Approx. 61,560 m³/h on low setting What is included: - 6 roof fans - Complete control cabinet / control unit - Used, well-maintained industrial set - Professionally dismantled in working order Inspection possible by appointment. Loading on site by arrangement. Relevant keywords roof fan, extraction fan, industrial ventilation, welding fume extraction, warehouse ventilation, extraction system, 400V fan, Colt Coltair, roof extraction, industrial extraction set

Year of construction: 2009, condition: new, Belt dimensions: 2000x100 mm Belt speed: 30 m/s Angle adjustable from 30 to 90° Power: 3 kW, 4000 V, 50 Hz Hodpfox Davsx Amyer Weight: 200 kg Rollers for grinding reamers: 3/4"; 1/2"; 1"; 1 1/4"

Condition: reconditioned (used), Hammelmann HDP, 064 with 2000 bar and 14 l in excellent condition. Hsdoy Anwpjpfx Amyjr

Condition: excellent (used), mileage: 468,185 km, power: 338 kW (459.55 HP), first registration: 09/2012, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, number of beds: 1, total length: 7,550 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2012, Equipment: differential lock, Crane Tap Length: 16,9 m Inspection date: 2026-03-29 Number of hydraulic extensions: 6 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Meter capacity: 60 m Capacity kilo: 11500 kg Structure Dish height: 125 cm = More information = General information Cab: Skycab, one and a half Registration number: 66-BBF-2 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Drivetrain Make of engine: DAF Axle configuration Tyre size: 385/65 R 22.5 Brakes: disc brakes Front axle: Max. axle load: 9000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Suspension: leaf suspension Rear axle 1: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90%; Suspension: air suspension Rear axle 2: Double wheels; Lift axle; Max. axle load: 7500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Suspension: air suspension Weights Empty weight: 20.015 kg Carrying capacity: 7.985 kg GVW: 28.000 kg Max. towing weight: 50.000 kg Functional Crane: HMF 6020 K-6, year of manufacture 2012, behind the cab Interior Number of seats: 2 Maintenance APK (MOT): tested until 01/2027 Condition Technical condition: very good Visual appearance: very good Number of keys: 2 (2 hand transmitters) = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Hodpfjyyvkfsx Amyor Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: excellent (used), mileage: 468,185 km, power: 338 kW (459.55 HP), first registration: 09/2012, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 7,550 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 3,900 mm, loading space width: 2,540 mm, Year of construction: 2012, Equipment: crane, differential lock, Crane Tap Length: 16,9 m Inspection date: 2026-03-29 Number of hydraulic extensions: 6 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Meter capacity: 60 m Capacity kilo: 11500 kg Structure Construction year: 2012 = More information = General information Cab: Skycab, one and a half Registration number: 66-BBF-2 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Hedpfx Amsyyu Nteyjr Drivetrain Make of engine: DAF Axle configuration Tyre size: 385/65 R 22.5 Brakes: disc brakes Front axle: Max. axle load: 9000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Suspension: leaf suspension Rear axle 1: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90%; Suspension: air suspension Rear axle 2: Double wheels; Lift axle; Max. axle load: 7500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Suspension: air suspension Weights Empty weight: 20.015 kg Carrying capacity: 7.985 kg GVW: 28.000 kg Max. towing weight: 50.000 kg Functional Crane: HMF 6020 K-6, year of manufacture 2012, behind the cab Layout Number of beds: 1 Maintenance APK (MOT): tested until 01/2027 Condition Technical condition: very good Visual appearance: very good Number of keys: 2 (2 hand transmitters) = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, The Eppendorf FA-45-30-11 is a durable fixed-angle rotor engineered for efficient high-speed centrifugation. Designed to accommodate multiple tube formats, it ensures consistent sample separation and reliable performance in demanding laboratory environments. Compatible with select Eppendorf centrifuge models. Hodjyx S Hmepfx Amyor

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Hsdpfxox U Dfgj Amyor Sliding table Crosscut saw Aigner table extension with Holz-Her ETZ feed unit, 8 speeds 380 Volt Shipping possible at extra cost!

Condition: used, Condition: Like new Manufacturer: Pfeiffer Type: TMH 064 Model No.: PM P02 366 Note: Must be operated with a suitable pre-pump and control system. Hsdpfxoc Irrks Amysr Delivery time: upon request

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Hedpfxsdzqpts Amysr Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: good (used), Gravity Flexi Roller Conveyors in Stock 3 Conveyors available Dimensions Conveyor 1, 3240mm closed x 560mm wide double plastic rollers, height 680mm fully adjustable Conveyor 2, 750mm closed - 2160mm fully open x 500mm wide steel rollers, height 8000mm fully adjustable Conveyor 3, 1350mm closed - 4500mm fully open x 500mm wide plastic rollers, height 770mm fully adjustable Hodpfoyr Nuasx Amysr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Centering table CPRC-600, length 1.2 m - Length: 3 m - Two feed speeds (working and return) - Two centering arms - Pneumatic pressure 2. Multi-blade saw type RP-500-G, max. cutting height 160 mm Hodoynkgiepfx Amyjr - Saw shaft drive motor 55 kW, feed motor 2.2 kW (stepless speed adjustment - inverter) - Chip collection conveyor belt - Strong lateral pressure rollers for offcut removal - Automatic feed regulation - Automatic bearing lubrication - Maximum number of circular saw blades on shaft: 15 pcs (Ø 450 x 70) - Maximum thickness of cut material (cant): 160 mm - Minimum thickness of cut material: 50 mm - Minimum length of cut material: 1.2 m - Lower drive shafts: 6 pcs - Upper extraction: automatic pneumatic chip extraction, extraction socket Ø 250 mm - Lower chip extraction + belt + extraction diffuser Ø 200 mm, portable control panel - Machine length: 2100 (2600) mm - Machine width: 2080 mm - Machine height: 1800 mm - Machine weight: 2200 kg - Machine’s productivity: 6-10 m³/h - Machine does NOT include saw blades - Power consumption approx. 62 kW 3. Outfeed conveyor DPTOZ-100 for ripped boards - Length: 4 m - 2 cross chains 4. Cross chain conveyor for sorting and picking boards - Width: 1 m - Length: 2.5 m Very little used. Like new. TOP condition.

Condition: used, Year of construction: 2003, General technical data: Machine type: Flexographic printing press Web width: 330 mm Number of colors: 6 Equipment & Configuration: • Turning bar • 2 die-cut stations • 2-shaft rewinder Hodpfxjyn Scfj Amyjr • 6 UV IVT lamps • Video camera system • 3 sets of cylinders • 6 anilox rollers • 3 magnetic cylinders

Condition: excellent (used), Year of construction: 2012, FRASCH Hodpfx Aeu Txcajmyor Type: FA-LH1200/LA 1800X500 Year 2012 L . 3.0 meters (1.2+1.8 meters) W. 0.50 meters H. 70 meters

Condition: ready for operation (used), Dürkopp Adler 767 - Fas Hjdsxlcw Hjpfx Amysr Dürkopp Adler 767 Fa price from 1,200 to 1,800 euros

Condition: used, machine/vehicle number: YA5B331A639B40214, axle configuration: 3 axles, first registration: 09/2006, suspension: air, tire size: 385/55, tire condition: 30 %, color: other, Year of construction: 2006, = Additional options and accessories = - Air Suspension - Disc brakes Hodeyhbzkjpfx Amyjr - Lift Axle = More information = Tyre size: 385/55 Tyre profile: 30% Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° Hedpfx Amju Ibzwjyer total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *

Condition: used, functionality: fully functional, Year of construction: 1984, Equipment: documentation/manual, type plate available, Crank-driven plate shear Manufacturer: Fasti, Type: 507 – 20 - 3 Year of manufacture: 1984 Technical data Manufacturer: FASTI Type: 507 – 20 - 3 Year of manufacture: 1984 Sheet metal width: 2040 mm Sheet metal thickness: 3.00 mm Overhang on the stand: 100 mm Hjdozpxdqepfx Amysr Number of strokes: 65 Motor power: 7.5 kW Dimensions: L 2.65 x W 1.20 (plus 0.8 m support arms) x H 1.3 m Weight: 2.1 t Equipment - Rear stop, 500 mm, manually adjustable - Adjustable clamping pressure - Angle stop - Support arms - Manual adjustment of the cutting clearance!!! - 4 x spare blades (2 x top blades / 2 x bottom blades) - Documentation All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 160 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Hjdpfswbt Rrjx Amysr Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition Hodpehmmfkefx Amysr

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Hedpettc Uasfx Amysr

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: - Maximum cutting length: 6050 mm - Minimum cutting length: 585 mm - Cutting height: 120 mm Hodpfx Amsxdxv Neyjr - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 - Cutting unit power: 4x 3 kW - Feed motor power: 1.1 kW - Material feed via chains - Feed speed adjustable with gear motor

Condition: used, machine/vehicle number: 76271002, sheet width:2040 mm plate thickness:1,2 mm total power requirement:2,5 kW Hodjcxxq Eepfx Amyor weight of the machine ca.:2,0 t dimensions of the machine ca.:3,0 x 1,6 x 1,7 m