Used Robland Combined Machine for sale (65,340)

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical data: - Bending operation and rolling operation by hand, - max. working width 1020 mm - max. material thickness St 40 1,25 mm - bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 85 mm - max. adjustability bending beam 20 mm - shaft diameter 55 mm - upper shaft swivels out - rear shaft parallel + inclined adjustable - space requirement approx. W 1500 x H 1400 x D 750 mm - weight approx. 400 kg Dcjdpof S Tg Tsfx Agvjh

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 126375/99-274723, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31.12.2025! The offer includes: Stahl Zi52/4-Fi52 (year of manufacture: 1999; serial number: 126375/99-274723) Stahl KBK 52 (year of manufacture: 1999, serial number: 121492/99-271702) The folding rollers of the machine have been replaced. The machine is manually adjustable. Djdpfxexyfmas Agvjch

Year of construction: 1978, condition: not inspected (used), machine/vehicle number: 1177, Connected load approx. 18 kW working width 140 mm Dcjdpfx Agoiw D T Isvoh Feed below consists of: conveyor belt 8800 x 60 mm bottom conveyor belt 8800 x 40 mm for stem Top feed consists of: Conveyor belt 7140 x 40 mm top Aggregates: pos. 1 - scoring unit 2,2 kW 3000 rpm. pos. 2 - milling unit 3 kW 6000 rpm. pos. 3 - milling unit 5,5 kW 6000 rpm. pos. 5 - belt grinding unit 2,2 kW 120 x 2060 pos. 8 - belt grinding unit 2,2 kW 120 x 2060 / frame grinding belt pos. 4, 6, 7, 9 - profile and edge breaking units Suction connection pieces 5x100 mm, 1x120 mm

Condition: new, Grinding stone D x W ----- 200 x 32 mm Shaft diameter ----- 32 mm Grinding stone ----- Grit 36 Wire brush D x W ----- 200 x 20 mm Speed ----- 2850 rpm Motor ----- 900W - 230V - 1 Phase Motor ----- 900W - 400V - 3 Phase Weight ----- 26 kg Dodpsga Tw Hjfx Agvsch OPTIONS * Base cabinet Price: € 99,00 ex vat

Condition: reconditioned (used), functionality: fully functional, Connected load 380V 3 x 3kW, weight approx. 550 kg, external dimensions 2700 x 1500 x 850 mm, turntable, jointer-thickness planer width 300 mm with three-knife shaft, table dimensions 310 x 1500 mm, clearance height 230 mm, circular saw 0-45° tiltable, max. cutting height 100 mm, saw table dimensions 350 x 950 mm, travel 1200 mm, saw blade diam. max. 300 mm, router with two speeds 3100 / 6200 rpm, router with two speeds 3100 / 6200 rpm, max. Cutting height 100 mm, saw table dimensions 350 x 950 mm, travel 1200 mm, saw blade diam. max. 300 mm, router with two speeds 3100 / 6200 rpm, router arbor 30 mm, height adjustment max. 110 mm, slot drilling device speed 4500 rpm, table size 180 x 470 mm, two-jaw chuck 0-165 mm, suction nozzle 3x100 mm Djdpjtqva Dsfx Agvech

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 338002, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31/12/2025! EQUIPMENT Dodpfx Aexyf T Togvech 6 folding pockets, electrically adjustable Altar folding pocket

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm Dcsdpfx Agjci Tvhovsh saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: ex stock 54634 Bitburg

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg Dsdpfxoza Tcqj Agvjch EQUIPMENT RNA vibratory feeder (diameter: 800 mm) External reference: 34

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg Djdpfx Aoza S Iregvoch EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Table size 720mm x 420mm, table load 500kgs, spindle speed 12,000rpm, Djdjzbituspfx Agvsch spindle motor power 28Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Spindle taper BT40, 12 station ATC

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-3A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen Dcsdpjy Uuw Tjfx Agvoh This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. Dcedpfx Agsy Uquhjvoh It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. Dodpfxey Uiyvs Agvjch The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Dcjdpfx Aey Ugtasgvoh Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device Djdpfxjy Uc Nkj Agvsch It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Dcsdpfx Aeyrrx Uogvsh Enclosed guarding

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Dsdoymn Hwopfx Agvech Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Dedpfx Agjx Hp I Rsvoch Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Protrack SLX Control Drilling Attachment 4 Way Toolpost 3 Jaw Chuck 3 Point Steady

Condition: excellent (used), XYZ 1500 Turret Milling Machine Dcsdpfoy N Ak Rjx Agvoh (Ex College) 2 Axis Newhall DRO Spindle Taper R8 Spindle speeds to 500 – 3500rpm Table Size 1069 x 228mm X – 610mm Y – 305mm Knee Travel: Z – 362mm 415V Electrics Year 2014 Serial Number 103080 Stock Number 2867

Condition: used, Year of construction: 2003, Machine for producing square rolls, equipped with a soaking station and a station for coating with grains. • Soaking station • Station for coating with grains • Machine imported from Germany The machine is in good working order. We also have a wide selection of used bakery and confectionery equipment. Dcodpjy Uklajfx Agvjh Please contact us – communication is possible in English, German, and Russian.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: G01747, Turning diameter over bed : 500 mm Turning diameter over slide : 280 mm Workpiece length : 2000 mm X-axis travel range : 280 mm Z axis travel range : 1935 mm Rotation speed : 3000 rpm/min Spindle tip : A2-8 Spindle flight : 82mm X / Z accelerated feed : 4/6 m/min Tailstock sleeve diameter : 75 mm Tailstock taper : MT5 Main spindle motor : 11/15 kW Tool shank size : 25x25 mm Tailstock step : 150 mm Positioning accuracy of the X/Z axis (C, Y) : 0,018/0,021 mm Repeatability accuracy of the X/Z axis (C, Y) : 0,014 mm Dcsdsvfdiujpfx Agvjh Weight : 2800 kg

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Dcsdsy Sd Tljpfx Agvjh Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Year of construction: 2021, condition: good (used), 1 x Box Taping Machine Model: AS523S Dedpfjy T Nbdjx Agvech Year: 2021

Condition: used, Year of construction: 2021, operating hours: 247 h, functionality: fully functional, machine/vehicle number: Tecto DC2 BS, input voltage: 400 V, total width: 1,170 mm, total length: 3,750 mm, total height: 1,230 mm, temperature: 2 °C, type of input current: three-phase, cooling capacity: 3,845 kW (5,227.74 HP), ambient temperature (min.): 4 °C, control cabinet height: 1,230 mm, control cabinet length: 3,750 mm, control cabinet width: 1,170 mm, overall weight: 300 kg, Refrigerated counter on 2 levels for displaying refrigerated goods. The bottom level is for wrapped accessories. The top level is for dispalying fresh seafood / meat / cheese / deli. Excellent Italian quality. There are fridge in both levels. Model: Tecto DC2 BS. Cooling requirement: 3845W (for 24/7 use) Color code: RAL7035 / RAL9006 Lengt: 3,75 meter Djdpfx Agey T Iimjvech Depth: 1,17 meter Hight: 1 meter 23,5 cm Cooling maschine: Split R452a Need electrician, plumber and refrigeration technician to install it.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 10 h, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Section Steel Laser Cutting Machine Bevel cutting highly enhances competitiveness Smart cutting head equipped with professional Acu3D rotary axis Achieves multi-directional, multi-angle 3D cutting Dcsdpfx Agow I Iliovsh (Web beveling, R-corner cutting, V bevel, Y bevel) Versatile cutting Sheet, tube, and section steel cutting in one One-stop processing workflow, seamlessly integrated with TEKLA Easily complete drawing import - nesting & programming - process setup - material alignment - cutting