Used Residual Material for sale (17,048)

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate Gsdpfx Ajidx Uiskyebu ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts and optional external network connection. ● Optimized cleaning by comparing input/output, which extends cleaning intervals and saves operating costs. ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heater. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: new, In every economic and public sector calculation, waste transportation is a critical factor. Here, it is not so much the weight but rather the volume that matters. The continuously rising transport costs for this waste are becoming an increasing economic issue. Proper disposal of large quantities of polystyrene or packaging film is particularly important in the retail sector. The VOLUME REDUCER ensures a volume reduction of up to 80 percent at this point. Bottles of any type and size, e.g., sparkling wine bottles, can be shredded effortlessly without the need for a compression mechanism. It is also possible to unpack expired food products. Furthermore, reject items such as pharmaceuticals, data carriers, or counterfeit products can be rendered unusable. Food residues and organic waste, including bones, can be shredded, collected, and converted into electricity and heat in biogas plants using the VR60. Gedpfx Akjyr I H Ujyjbu Consider, for example, a reverse vending machine for deposit bottles. PET bottles are compressed and held under lock and key until collection due to the presence of a barcode. By using the VOLUME REDUCER, the barcodes on PET bottles could be made unrecognizable, thereby achieving significant volume reduction. The shredded bottles could then be collected in a large container, eliminating the need for daily collection at return points. The shredder's vertically moving, wear-free blades ensure a quiet and clog-free operation. ALL ADVANTAGES AT A GLANCE - Non-rotating shredder - No material entanglement thanks to non-rotating blades - Automatic feed through blade movement - Automatic reversing V-shaped blades prevent jamming or blockage - Fast component change thanks to modular system - Intelligent control via compact logic system (PLC) - One-button operation - Optional material discharge via conveyor belt - Shredder module can be integrated into existing systems - Low blade wear and maintenance costs due to highly abrasion-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL - Dimensions: 90 cm x 70 cm x 85 cm - Weight: approx. 190 kg - Power consumption: 3 kW - Connection value: 400 V three-phase alternating current

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,044 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, laser power: 6,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details. • Working format/area: 3,000 x 1,500 mm; X 0–3,000 mm / Y 0–1,500 mm / Z 0–115 mm • Machine design: Closed machine frame; gantry drive with direct linear drives; automatic longitudinal pallet changer; integrated control cabinets and storage cabinet; working-area lighting; machine status light; water/air machine and laser chiller; CE compliant; ambient temp 5–35 °C • Dynamics/accuracy: Max simultaneous axis speed 280 m/min; Ps 0.03 mm; Pa 0.05 mm; min programmable increment 0.001 mm • CNC control: Siemens SINUMERIK 840D sl with 21.5" color MultiTouch; MultiTouch HMI; USB and RJ45; integrated technology data; programmable cutting gas/pressure; production planning; multi-sheet processing; automatic shutdown; Remote Support interface; Condition Guide; Cutting Guide; Central Link; Online Update Manager • Laser source: TRUMPF TruDisk 6001 (6 kW) solid-state disk laser; fiber-optic beam delivery; one LLK output; closed beam guidance; high back-reflection resistance; stable output over service life • Cutting head: Universal cutting unit; single cutting-head strategy; adaptive lens system; protective glass with online condition monitoring; auto nozzle centering; collision protection; capacitive height control; automatic focal position; pilot laser • Standard cutting functions: AdjustLine; BrightLine fiber; ControlLine; FastLine; FlyLine; FocusLine; NitroLine; PierceLine; Performance package; Highspeed cutting package; Copper and Brass cutting packages; Micro-weld • Additional cutting package: Highspeed Eco (fusion cutting, medium-thickness stainless steel) with up to 70% cutting-gas reduction and up to 100% sheet throughput increase • Automatic nozzle changer: 21 positions; automatic change/cleaning/re-setting tied to material/process; reduces setup/handling • Drop&Cut: Integrated camera; assigns live image of residual sheet to part geometry; live cutting preview; no separate programming needed for basic use Gbedpfx Akozuzwdjyeu • Process monitoring camera: Front-area monitoring (~2.5 m); remote observation; preliminary result assessment; video stream output to external monitor • Pallet/material handling (machine-integrated): Automatic longitudinal pallet changer; loading/unloading parallel to machining; pallet access from three sides • 1 x license TruTops Boost Additional equipment • LiftMaster Compact 1530 (AL34) automatic loading/unloading system • Type 1530; max sheet 3,000 x 1,500 mm; min sheet 1,000 x 1,000 mm • Max sheet thickness 25 mm; max sheet weight 900 kg; max unloading weight 900 kg • With rake lifter: max thickness 25 mm; with rake lifter + belt system: max thickness 15 mm • Minimum part size with rake lifter: 150 x 150 mm • LiftMaster equipment/options • Storage connection; extended pallet travel out of machine • Sheet separation device; double-sheet detection; synchronous loading • Thin-sheet separation (0.8–2.0 mm); loading station for 90 mm stack height • Structural-steel loading grippers, 67 mm pitch, replaceable tines

Condition: new, functionality: fully functional, Year of construction: 2026, SENFENG SF6012 PLUS – 3kW Fiber Tube Laser Cutting Machine High productivity, efficient material handling and maximum material utilization The SENFENG SF6012 PLUS is a high-performance fiber laser tube cutting machine designed for efficient series production of small to medium-sized tubes and profiles. Equipped with a 3,000 W MAX Photonics fiber laser source, semi-automatic tube loading and the advanced T PLUS overtravel cutting concept, the machine combines high cutting performance with efficient material handling and minimal residual material. Available for viewing, demonstrations and test cutting in our showroom from October 2026. Why choose Besten Machines? ✔ Over 25 years of experience in metalworking ✔ Locations in the Netherlands and Germany ✔ Own Dutch and German service engineers ✔ Installation, commissioning and operator training ✔ Technical support and spare parts availability ✔ More than 70 SENFENG machines successfully installed Machine Configuration 3,000 W MAX Photonics fiber laser source BOCI autofocus 2.5D laser cutting head FSCUT3000DE-A CNC control system Cooling system for laser source and cutting head Power stabilizer Semi-automatic loading system up to 6.5 m Loading capacity for up to 5 tube/profile positions Unloading station with 2 m conveyor Optional 3–4 m conveyor TubesT 3D tube nesting software Fully enclosed, CE compliant Technical Specifications Model: SF6012 PLUS Laser power: 3,000 W Laser wavelength: 1060–1080 nm Tube length: 1,000–6,500 mm Round tube: Ø15–Ø120 mm Square tube: 15×15–120×120 mm Maximum tube weight: 120 kg Maximum acceleration: 1.5G Maximum rapid speed: 150 m/min Maximum chuck speed: 240 rpm Positioning accuracy X/Y: ±0.4 mm Repeatability X/Y: ±0.4 mm Power supply: 3×380 V / 50 Hz Protection class: IP54 Dimensions incl. loading system: approx. 9,100 × 2,230 × 2,300 mm Machine weight: approx. 3,400 kg Key Features Gbjdpozwquqofx Akyeu T PLUS Overtravel Cutting The movable front chuck enables overtravel cutting, minimizing residual tube length and maximizing material utilization. Semi-Automatic Loading Loading system with up to five tube/profile positions for material lengths up to 6.5 m, reducing manual handling while maintaining production flexibility. Servo-Controlled Tube Support Active supports reduce sagging and vibration during processing, improving stability and cutting accuracy. FSCUT & TubesT Software Integrated CNC control combined with 3D nesting software for efficient programming, automatic nesting and material optimization. Automatic Unloading Finished parts are discharged via conveyor for controlled and efficient material handling. Applications Suitable for processing carbon steel, stainless steel and aluminium tubes and profiles. Ideal for machine construction, steel fabrication, furniture production, automotive components, agricultural machinery and general series production. Showroom & Service The SF6012 PLUS 3kW will be available in our showroom from October 2026 for demonstrations and test cutting. Besten Machines provides installation, commissioning, training and after-sales service through our own service team in the Netherlands and Germany. Contact us for a quotation or demonstration. Send us your drawings and material specifications and we can perform a test cut for your application.

Condition: excellent (used), POLYCITRUS FRATELLI INDELICATO ZX2 Industrial Extractor – Stainless Steel POLYCITRUS FRATELLI INDELICATO ZX2 industrial extractor, designed for the continuous extraction and separation of juice and pulp in the industrial processing of citrus fruits and other compatible fruits. The equipment features a large upper feed hopper and a horizontal processing chamber, where the product undergoes a mechanical action that allows for the extraction of the usable fraction and its separation from peels, seeds, fibers, and other solid residues, depending on the product and the installed configuration. Its construction, primarily in stainless steel, and its robust design allow it to be incorporated into industrial lines for the production of juices, pulps, and fruit derivatives. MAIN FEATURES -Manufacturer: FRATELLI INDELICATO -Designation: POLYCITRUS -Model: ZX2 -Type: Industrial fruit / citrus extractor -Continuous operation -Upper feed hopper Gbjdozxwyvopfx Akyou -Horizontal extraction chamber -Mechanical extraction and separation system -Separation of liquid / pulpy fraction and solid residues -Differentiated discharges according to configuration -Driven by an electric motor -Construction primarily in stainless steel -Enclosure of the moving elements -Robust industrial structure -Access to the processing chamber for cleaning and maintenance -Suitable for integration into fruit processing lines PROCESS The fruit or raw material, previously prepared, is fed through the upper hopper and passes into the extraction chamber. Inside, the mechanical system exerts the necessary action to break, press, and/or separate the product, allowing the recovery of juice, pulp, or a combination of both, depending on the product being processed and the internal elements installed. During the process, undesired fractions, such as peels, seeds, and fibrous material, are separated and evacuated independently of the usable product. The resulting product can then be sent to: Refiners / finishers Screens Buffer tanks Centrifuges Homogenizers Pasteurizers Sterilizers Evaporators / concentrators Aseptic tanks Filling lines APPLICATIONS Particularly suitable for fruit processing industries, juice, pulp, fruit base, and citrus derivative manufacturers. Depending on the installed extraction elements and the prior preparation of the raw material, it can be used in different extraction, separation, and recovery processes for the usable fraction of the fruit. The POLYCITRUS FRATELLI INDELICATO ZX2 provides a robust solution for incorporating a continuous mechanical extraction stage into industrial fruit processing lines. Machine available for inspection. Additional technical information, production capacity, internal configuration, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm Gjdeutmw Hopfx Akysbu 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: good (used), - Material: AISI 316 stainless steel - Standing on feet - Tanks, above, adapted to the cellar vault Dimensions : - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height at rear: 2500 mm - Total height at front: 3650 mm (including dome) - Ground clearance: 340 mm Equipment: - Rectangular door 320 x 420 mm - Total drain: flap valve DN 40, Friedrich no 2 - Residual drain: flap valve DN 40, Friedrich no. 2 - Taster - Level indicator - Dome DN 200 Godpfx Akjvlkgajyjbu

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Gbjdpfxovug Dyj Akysu Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Year of construction: 2013, condition: used, Water degassing module. Suitable for integration into existing control systems. Additional title: cold degassing Capacity: 50 hl/h Residual oxygen content: 0,03 mg/l Column volume approx.: 300 l Operating temperature: 95 °C Operation / Control: PLC / visualization by customer Material: Stainless steel 1.4301 Base construction: Height-adjustable feet Gbedpfx Aevcqqtskysu Features: Two-chamber column; water pump; panel

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 21O0400016-04, total height: 6,557,000 mm, total width: 2,450,000 mm, total length: 8,290,000 mm, type of input current: three-phase, input voltage: 380 V, power: 90 kW (122.37 HP), Equipment: CE marking, type plate available, The Mixer is a machine designed to blend materials of different consistencies, such as pruning residues and digestate, within the composting process. Feeding can be automatic via conveyor belts or manual using a loader operated by an operator. The machine is in nearly-new condition and can be applied in various fields; it can be inspected and tested, including with specific products. Gbedpfx Akew Tir Isysu

Condition: new, functionality: fully functional, Forklift Magnetic Sweeper – Stainless Steel – For Clean & Safe Industrial Floors Manufacturer: die magnetprofis GmbH & Co. KG Condition: New Availability: Immediately from stock —— Product Description: Our high-performance forklift magnetic sweeper is ideally suited for the fast and efficient collection of metal debris, shavings, nails, screws, wire scraps, or other ferromagnetic foreign objects on indoor or outdoor surfaces. It reliably protects tires, vehicles, and machinery from damage caused by stray metal parts. The brushed stainless steel construction is not only visually appealing but also guarantees corrosion resistance, durability, and hygienic cleaning – perfect for industrial, workshop, storage, or outdoor use. —— ✅ Technical features: • Mounting type: Fork tine mount – compatible with all standard forklifts • Material: Stainless steel V2A – rustproof & robust • Working width: approx. 1200 mm (other widths available upon request) • Magnet type: High-performance permanent magnets (maintenance-free) • Discharge: Mechanical via lever / manual tilting mechanism • Collected items: Nails, screws, shavings, nuts, drilling residues, and more • Ground clearance: Optimized for picking up small metal objects • Fastening: Incl. safety screws for anti-slip mounting —— Fields of application: • Freight companies & logistics centers • Construction depots, municipal operations • Metalworking / locksmiths / workshops • Recycling & waste management companies • Warehouses / production areas • Agriculture (yard cleaning, stables) —— Scope of delivery: • 1x stainless steel forklift magnetic sweeper • 2x wing screws for fork tine safety • Operating and safety instructions Gjdpswx Nbzsfx Akyjbu —— Enquire now – for clean surfaces and maximum safety. Also available in custom sizes or with your individual logo!

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Gjdpot Tvk Ajfx Akyjbu Rotor width = working width 98 cm 22 kw motor with discharge auger

Condition: reconditioned (used), power: 11 kW (14.96 HP), operation weight: 8,000 kg, Horizontal baler DIXI 80 SLD 2018-2021 Year of construction Semi-automatic 80-tonne baling system for the economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard packaging Tetra packaging Films PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4,320 x 1830 x 2,154 mm Filling opening W x H (standard) mm: 1,040 x 1,110 mm Machine weight approx. kg: 8,000 Press force max. kN: 80 t / 800 kN Ironing cycle (average value) approx. s: 35 Bale size W x H x L approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Binding: manual Gbsdeqa Dq Djpfx Akyeu Number of bindings: 4, with wire with Quicklink wire Drive power: 11 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation. The operating instructions are available and are supplied as a PDF file and in paper form.

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Gbjdpfszf N Ncsx Akyju Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever-larger amounts of data, making troubleshooting during the development phase more complex and time-consuming. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the advantages of an intelligent and powerful data logger, such as the GL5300 series, come into play. The GL5300 series covers the time-synchronized recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and Ethernet networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 units for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 units for the synchronous recording of up to 60 100-Base-T1 (30 taps) and up to 18 1000-Base-T1 lines (9 taps). Residual bus simulation Classification unit Gateway Gjdpfxozg Tzrj Akyobu CCP/XCP on CAN, XCP on CAN FD, XCP on Flexray, XCP on Ethernet Sending of any, freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB, and mobile network Operation via menu control Technical data: GL5300 configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 RS-232 interfaces 7 Analog inputs 10 bit 4 Operating voltage +7 V … +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA in semi-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C ... +70 °C Housing: Material side profiles: Al Mg3 Lid: EN AW-6060 (AlMgSiO,5) T66 Decorative strip: ABS Dimensions (L x W x H) 212 x 290 x 80 Weight ~ 3500 g Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system Capacity: 20000 l/h Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar Godpfsy Ti Anox Akyobu Gross volume buffer tank: 7060 l ; overpressure up to 4 bar Residual oxygen content appr.: 0,010 - 0,015 mg/l Operation / Control: Simatic S5 Material: stainless steel Position: mounted on stainless steel frame with feet Features: 2 x degassing vessels; pressure tank; centrifugal pumps; vacuum pump with separator; CO₂ dosing (via needle valve); flow, pressure and level measurements; switch cabinet; pipe panel; various pipework, valves and fittings Additional title: cold degassing via CO2-Stripping

Year of construction: 2025, operating hours: 1,250 h, condition: reconditioned (used), functionality: fully functional, Mobile screen separator for biowaste, household waste, residual waste, compost, green waste, biomass, waste wood, wood chips. Current application: biowaste processing for wet fermentation. The machine provides a contaminant-free, homogeneous fraction for the fermenter, thus preventing the formation of sinking or floating layers. Gbjdoy Elwfopfx Akyeu Inspection & demonstration: Inspection possible during live operation at our partner company in the Kelheim district. Processes can be discussed directly with the plant operator. Technical data: Model: Lepton 5100 | Year of construction: 2025 | approx. 1250 operating hours Location: D-84069 Schierling | Availability: short-term Screen decks: Deck 1 (52mm), Deck 2 (43mm) Equipment: Adjustable metering roller, volume measurement, preparation for air classifier, compressor, LED package, wireless remote control. Drive: Diesel-electric (Perkins 58kW, without Adblue) + option for external power supply (400V 63A). Transport dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). Screening material: Compost, green waste, biomass, wood, waste, EBS. Condition: Very good, fully operational, the machine will be completely refurbished in our workshop before sale.

Condition: used, mileage: 211,148 km, power: 330 kW (448.67 HP), first registration: 05/2019, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, Year of construction: 2019, Equipment: air conditioning, Internal vehicle number: G400046 Available immediately at our location in Kaufungen. More information at: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 4145 8x6 Schwarzmüller Three-Way Tipper | 41 t | Euro 6c For sale: a used Mercedes-Benz Arocs 4145 8x6 with a Schwarzmüller three-way tipper body, manufactured in 2019. The vehicle is equipped with a 449 hp diesel engine, automatic transmission, tipping hydraulics and robust leaf-spring suspension. With a permissible gross weight of 41,000 kg and a payload of 25,600 kg, the vehicle is ideal for heavy construction-site operations, earthmoving and bulk-material transport. Gbedpfjylrzpjx Akysu Technical details: * Manufacturer/Model: Mercedes-Benz Arocs 4145 * Vehicle type: Three-way tipper * Body: Schwarzmüller * First registration: 05/2019 * Year of manufacture: 2019 * Mileage: Approx. 210,000 km * Power: 330 kW (449 hp) * Engine capacity: 12,809 cm³ * Fuel: Diesel * Transmission: Automatic * Emission standard: Euro 6c * Environmental badge: 4 (Green) * Number of axles: 4 * Axle configuration: 8x6 * Hydraulic system: Tipping hydraulics * Suspension: Leaf springs * Permissible gross weight: 41,000 kg * Empty weight: 15,400 kg * Payload: 25,600 kg * Folding underrun guard * Air conditioning * Colour: Green * Technical inspection: New * Vehicle number: G400046 * Condition: Used * German vehicle Inspection is possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number: G400046 * Purchase price: €88,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €1,390.80 Residual value: €16,680.00 If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUT

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 Gbjdpjy Twg Uefx Akysu FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system • The machine has a double-wound AC spindle motor. • The axes are also directly driven. • The machine does not have a direct measurement system. Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories Gedpjy Tw R Hsfx Akyebu • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating statuswith deep-hole drilling cycle function Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: excellent (used), functionality: fully functional, The FDS 3000-1 Trio is an automatic fish skinning machine designed for the gentle skinning of soft, trimmed whitefish fillets and fish portions of uneven thickness. This brand’s machine has been used for years in fish processing plants around the world as a proven solution where high yield and minimal damage to the raw material are essential. Technical Specifications Manufacturer: TRIO Model: FDS 3000-1 Capacity: 40–120 fillets/min (depending on fillet size) Skinning depth: 0–10 mm Feeding method: manual Skinning method: freezing the fillet on a chilled drum; operates without stretching the skin or flesh Supported species: including hake, pollock, blue whiting, and whitefish of varying thicknesses How does the Trio FDS 3000-1 skinning machine work? The operating principle of the FDS 3000-1 is based on a unique method of “freezing” the fillet on a chilled drum. The fillet is manually fed onto the surface of the rotating drum, where—thanks to the low temperature, the force of gravity, and light pressure—it is stabilized in a flat position without compressing or excessively straining the tissue. Only in this position does the knife remove the skin, leaving as much valuable meat as possible. This method allows for shallow, controlled skinning—with a cutting depth ranging from 0 to 10 mm—which results in less discoloration, fewer skin residues on the fillet, and higher end-product yield compared to the brand’s traditional, older models. Key Advantages of the Trio FDS 3000-1 The FDS 3000-1 skinner is particularly effective when the raw material is delicate or has uneven thickness—the gentle skinning method on a cold drum reduces the risk of fillet damage and preserves its structure even when processing thawed, previously frozen products. The machine’s capacity, ranging from 40 to 120 fillets per minute depending on the size of the raw material, allows the operating speed to be adjusted to the characteristics of a specific production line. The machine’s design ensures stable, consistent skinning quality regardless of the fillet’s shape and thickness, which reduces the need for manual adjustments and speeds up subsequent processing stages. The simple, manual method of feeding fillets means that operating the machine does not require extensive staff training. Applications and supported fish species The Trio FDS 3000-1 is used for skinning soft white fish fillets and portions of uneven thickness, including previously frozen and thawed raw material. The machine is well-suited for processing species such as hake, pollock, blue whiting, and other white fish that require gentle handling during processing. Thanks to its flexibility in skinning depth, the FDS 3000-1 is suitable both for producing fillets intended for further processing (e.g., breading, freezing, smoking) and for production lines focused on maximizing the yield of high-value raw material. At BMG Trade, we specialize in the sale of machinery for the food industry, including professional fish-processing equipment such as Trio skinning machines. If you are looking for a Trio FDS 3000-1 skinning machine—whether new or a proven, used machine in good working condition—please contact us. We will help you select the right model for your product range and production scale, and we will also advise you on transportation, service, and commissioning the machine at your facility. Gjdpfx Ajzlhihjkyobu Contact us to find out about current availability and pricing for the Trio FDS 3000-1.

Year of construction: 2010, condition: used, The Colussi Ermes L0130/017 Type 2414 is a machine from the Colussi Ermes brand, designed for automatic washing of bins and transport containers used in the food industry. How does the Colussi Ermes L0130/017 bin and vat washer work? Godpfozudbxex Akyjbu The washer uses high-pressure washing technology, combining the mechanical action of pressurized water jets with chemical agents, allowing effective removal of even stubborn residues from the surface of bins and containers. The machine is designed to wash containers of various shapes, heights, and dimensions, including square, round, plastic, steel, and wheeled containers. The stainless steel construction with thick, insulated panels limits heat loss, while an advanced water extraction system allows the equipment to be reused almost immediately after a washing cycle is completed. Key advantages of the Colussi Ermes L0130/017 The Colussi Ermes L0130/017 can wash between 20 and 120 containers per hour, depending on the program used and the type of bins being washed, making it a flexible solution for plants of varying production scale. The ability to program individual washing cycles tailored to customer needs, along with responsible chemical dosing, reduces media consumption and environmental impact. Continuous monitoring of the washing process in line with HACCP standards, along with a mechanical lift system that eases service access, increase the safety and convenience of operating the machine. Its robust stainless steel construction and energy-efficient washing programs with multi-stage water heating ensure reliable operation under intensive use. Technical specifications of the Colussi Ermes L0130/017 Manufacturer: Colussi Ermes Model: L0130/017 Type: 2414 Year of manufacture: 2010 Capacity: 20 – 120 containers/h Construction material: stainless steel, with insulated panels Compliance: process monitoring in line with HACCP standards Application of the Colussi Ermes L0130/017 bin and vat washer The Colussi Ermes L0130/017 is used in food industry plants, wherever regular and effective washing of bins and transport containers used for carrying and storing raw material is required. The machine performs well both in smaller facilities and in higher-throughput production lines.

Condition: new, Year of construction: 2026, CORMAK DI325 – Compact Dry Ice Cleaning Machine The CORMAK DI325 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI325 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–8.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, Gbodpfx Aozwfulokyju effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI325 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI325 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI325 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 550 W Power supply 230 V AC, 50 Hz Air consumption 0.8–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–0.75 kg/min (adjustable) Dry ice hopper capacity 5 kg Weight 55 kg Dry ice pellet size 3.0–8.0 mm Drive system Direct drive Machine dimensions (L × W × H) 580 × 420 × 650 mm

Condition: used, Year of construction: 2020, Industrial bandsaw CENTAURO SUPERCUT 80 BANDSAW FOR THIN SLICES WITH THE HIGHEST PRECISION The major advantages of a compact and versatile machine for all applications in the field of thin slicing: Thin slicing from 2 mm material thickness Maximum cutting accuracy up to 0.15 mm Minimum cutting kerf from 1.3 mm Ideal for cutting dry and wet wood as well as alternative materials The surface of the thin lamella can be glued directly, without any further post-processing being required User-friendly electronic control Two programmable feed speeds of the conveyor belt from 0 to 30 m/min for optimal cutting quality and a longer service life of the saw blade Optical sensor for starting the cutting cycle and for automatic speed switching Ground work table Flexam feed belt for optimal performance 6 height-adjustable rubber pressure rollers, whose position can be adjusted to open/close, in order to ensure the optimal pneumatic clamping pressure on the workpiece during the feed and cutting process Oleopneumatic saw blade tension for optimal cutting performance Upper and lower Chaco saw blade guides, which ensure optimal stability of the saw blade during the cutting process Internal and external lubrication of the saw blade for removing resin residues and chips 4 dust extraction connections to optimize the extraction of dust and chips Maximum cutting height 400 mm (optional 500 mm) Maximum cutting width 400 mm Powerful quality motor with 15 kW (20 hp) Ethernet interface for online service and remote maintenance Godezvflnjpfx Akyjbu Carbide or stellite saw blades for optimal cutting performance Maintenance-friendly design and easy service

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Gjdpjyyz Ebofx Akyobu Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!