Used Remote Control Tensioner Hydraulic for sale (56,126)

Condition: used, mytron Type: TS 1800 Temperature control system Technical data: External dimensions: 2120 x 2300 x 1300 W x H x D in mm Reservoir volume: approx. 1800 liters Temperature range: -40°C to +40°C Operating temperature: -40°C Temperature sensor: Remote sensor with 7-meter cable length Cooling: Cooling water inlet: 1 1/4" - socket Cooling water outlet: 1 1/4" - socket Cooling water consumption: approx. 40 l/min Condensate drain: 1/2" - ball valve Power connection: 400V, 50 Hz Power consumption: approx. 34 kVA Fuses: 3 x 35.0 AT, 1 x 6.0 AT, 1 x 4.0 AT Safety device: Over-temperature protection, fixed at 50°C Under-temperature protection, fixed at -50°C Fault indication via red signal lamp Communication: Profibus (on 9-pin SUB D connector) Air intake nozzle, top: 500 x 250 mm Air outlet nozzle, bottom: 500 x 250 mm Weight: approx. 920 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Lasdpfx Aszdr Edslbsh We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test specimen protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface according to documentation Digital outputs for test specimen control Test chamber dimensions according to documentation: approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 600 kg Scope of supply: CTS climate testing chamber C-70/600 including existing documentation / operating instructions Scope of supply as shown in the pictures For your safety as a buyer: The unit can be inspected by arrangement. Loading with a forklift can be arranged. For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: Laodpfsy Hkazox Albsh 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Köhler Type: HK 500 Salt spray chambers: Versatile testing options, from salt spray tests to fully automatic alternating tests Simple operation thanks to a graphical menu Customer-specific designs for many applications Easy operation via a touchscreen Lasdozd Umkspfx Albsh Internal dimensions W x D x H (without hood): 1080 x 675 x 580 mm External dimensions W x D x H: 1940 x 900 x 1220 mm Test chamber volume: 500 liters Chamber temperature: Ambient temperature +5 – 60°C Humidification temperature: Ambient temperature +5 – 75°C Power connection: 230V, 1 phase, 50/60Hz, 2000W Compressed air: 4.5 – 8.0 bar / 3 Nm³/h Salt solution reservoir: 140 liters Material: Stainless steel (Completely overhauled and converted by the manufacturer to a Comfort control system) - Renewal of all electrical components - Renewal of all hose connections 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), ATTENTION! THE STATED PRICE APPLIES TO ONE LIFEPAK 15 UNIT WITH ITS ASSOCIATED ACCESSORIES. THE PRICE DOES NOT APPLY TO THE THREE DEVICES SHOWN IN THE PHOTOS! For sale: Physio-Control LIFEPAK 15 monitor/defibrillator, with charger and additional accessories. Device specifications: Manufacturer: Physio-Control. Model: LIFEPAK 15. Year of manufacture: 2015 – according to the nameplates shown. REF: 99577-001397. PN: V15-5-000024. Protection rating: IP44. Accessories shown in the photos: Physio-Control MOBILE Li-ion Charger (dual-bay). Defibrillation paddles. ECG cables. SpO₂ sensor with cable. Lasdsz Slkcjpfx Albsh Blood pressure cuff with cable. Side bags for accessories. Mounting bracket/base. MultiTech communication module. Used equipment, with visible signs of use. The photos show the devices offered and the available accessories. The exact scope of accessories for a specific unit should be confirmed before purchase. SOLD INDIVIDUALLY – THE STATED PRICE IS FOR ONE UNIT WITH ACCESSORIES, NOT FOR THE ENTIRE SET SHOWN IN THE PHOTOS!

Condition: used, ABB Type: Robot IRB 340 / Controller IRC5 M2004 ABB Robot FlexPicker Delta4 IRB 340 with controller IRC5 M2004 Payload: 1 kg Positional accuracy: 0.1 mm Angular repeatability: 0.4 Working range (diameter): 1,130 mm Height: 250 mm Weight approx.: 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone. Written orders can be placed via email or fax. Lajdpfxeqzw Tto Albeh

Condition: used, Vötsch   Type: VCS³ 7027-10 Ljdpfxszh Huus Alboah   Vötsch climate testing chamber, water-cooled With a temperature change rate of 10 K/min   Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K   Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min   Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours)   External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters   Side opening: 50 mm Side opening: 125 mm   Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on customer’s side: 63 A, slow-blow   Refrigerant: R404A/R-23   Weight approx. 835 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Minimum temperature -72°C Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Lasdpfx Aeziiwujlboh Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests:   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, over time ± 1 to ± 3% RH   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow   Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, IPG Ytterbium Type: YLP-C-1-100-20-20 IPG Ytterbium fiber laser with controller IPG Ytterbium fiber laser Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Lodpjzdyyvefx Albeah We would be happy to answer any further questions you may have over the phone.

Condition: used, Mitsubishi Type: Melfa RV-3SB Industrial 6-axis articulated arm robot 6-axis articulated arm robot RV-3SB Maximum payload: 3.5 kg Weight: 38 kg Robot controller CR2B-574-S312 Teach pendant R46TB with color/touch display Condition: used Lasdpfx Aozd T Uaolbjh Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Mitsubishi Type: RH-3FH5515-1D1-S15 + CR751-03HD1-0-S15 Mitsubishi Industrial Robot Payload (kg): 3 Degrees of Freedom: 4 Speed (mm/s): 7200 Repeatability (mm): 0.01 Cycle Time (s): 0.44 Max. Reach Radius (mm): 400 Operating Range J1 (degrees): 264 Operating Range J2 (degrees): 282 Laodpfxezd Tuts Albjh Operating Range J4 (degrees): 720 Stroke of Z-axis (mm): 180 Controller Type: CR751-D Protection Class: IP20 Power Supply: 1 Phase (VAC) 200-253 Power Consumption (VA): 500 Product Dimensions & Weight Width (mm): 130, Height (mm): 511.5, Depth (mm): 580 Weight (kg): 14 Condition: used Scope of Delivery: (See Image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Type: RS 60 / Controller CS8 C Ledszdyq Uspfx Alboah Stäubli RS60 robot with CS8 C controller for demanding pick-and-place applications. Payload: 2 kg Axes: 4 Description: Working range: 600 mm Inner radius: 166 mm Repeatability: +/- 0.01 W x H x D: 810 x 976 x 710 mm Weight: 70 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Stäubli Type: RX90 Controller: RX90 - CS7 Laodpfx Alozdiu Sebjh Industrial robot Description: Axes: 6 Controller: CS7 Payload: 6 kg, and 12 kg at reduced speed Reach: 985 mm Approximate weight: 360 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Mitsubishi Mitsubishi Industrial 6-Axis Articulated Arm Robot RV Series Industrial Robots Compact and powerful, offering flexible automation and high reliability. The RV series provides a highly dynamic 6-axis articulated arm robot for the highest level of quality. Type: RV-3SDB-S15 Laedpfxjzdyuas Albjh Number of axes: 6 Maximum lifting capacity: 3.5 kg Reach radius: 642 mm Weight: 38 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Fanuc Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Fanuc robot with control unit Fanuc robot M-420I A The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance with high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Programming teach pendant Large work envelope with a horizontal reach of 1855 mm Lodszdit Tspfx Albjah Repeatability of +/- 0.5 mm at full speed and full payload throughout the entire work envelope. Linear motion speeds up to 4200 mm/s. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Stäubli Stäubli RX 60 robot with CS7MB RX60 control unit Manual Control Operator Type: Stäubli RX60 robot Control unit: CS7B RX60 Lasdozditmepfx Alboh Lifting weight (nominal load – kg): 2.5 kg Total weight: 44 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Lajdpfxozdy Ias Alboh Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, METTLER TOLEDO AutoChem Fluid Control Module / Fluid Handling Module Mettler Toledo AutoChem FCM Fluid Control Module with integrated FCM-1200 Modifier Fluid Pump For sale is a used AutoChem Fluid Control Module from the manufacturer Mettler Toledo. The device is intended for use in corresponding AutoChem systems as well as for laboratory, reaction, dosing, and fluid handling applications. Technical data: Manufacturer: Mettler Toledo Model: FCM Part Number: 16000903 Device type: AutoChem Fluid Control Module Power connection: 220 VAC Power frequency: 50 / 60 Hz Fuse: 4 A Time Delay Dimensions: approx. 450 × 650 × 550 mm (W × D × H) Weight: approx. 50 kg Integrated pump: Mettler Toledo FCM-1200 Modifier Fluid Pump Part Number: 16001176 Interfaces: 2 × REMOTE 1 × GPIB Fluid connections on the front and rear Front connections: INLET OUTLET Status indicators POWER ON and NOT READY Equipment: FCM-1200 Modifier Fluid Pump Integrated fluid lines Fluid fittings and valves INLET and OUTLET connections REMOTE interfaces GPIB interface Status indicators IEC power connection Metal housing with service panel Accessories as shown in the pictures Application areas: Mettler Toledo AutoChem systems Laboratory automation Reaction systems Fluid handling Dosing applications Process automation Ljdozt Nzhepfx Alboah Research and development Scope of supply: 1 × Mettler Toledo AutoChem FCM Fluid Control Module Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, KUKA KUKA KR 180 R2500 extra industrial robot + KRC4 controller For sale is a powerful industrial robot from KUKA, model KR 180 R2500 extra, including KRC4 controller and operator panel. The system was used in an industrial environment and is fully functional. It is ideally suited for automation, handling, welding applications, and general production processes. Technical data robot: Payload: 180 kg Reach: approx. 2496 mm Axes: 6 Weight: approx. 1059 kg Lajdpfxjy Dn Sie Albjh Technical data controller (KRC4): Supply voltage: 3 x 400 V Frequency: 50/60 Hz Full load current: approx. 20 A Fuse rating: 25 A Weight: approx. 151 kg Dimensions (approx.): Robot height: approx. 2200 – 2500 mm Footprint: approx. 1000 x 1000 mm Controller (H x W x D): approx. 1000 x 800 x 800 mm Software / System: KRC version: V8.2.22 HMI version: 8.2.0.4 B142 Basic system: KS V8.2.142 Windows version: XPe V3.0.2 Additional axes: 1 Equipment: KUKA KRC4 controller KUKA teach pendant (operator panel) Connection cables and wires Industrial design for continuous operation Condition: Used, technically functional, with typical signs of wear. The system was in operation until recently. Scope of supply: KUKA KR 180 R2500 extra robot KUKA KRC4 controller KUKA operator panel (teach pendant) Connection cables / wires as shown in the pictures Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Lasdezil Uiopfx Alboh Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Brüel & Kjær LDS Dactron Shaker Control System / Vibration Testing Controller LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Mains connection: 100–240 V AC Ledpfx Ajzrtylelbsah Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Scope of delivery: 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. Laodpjxfl Axsfx Albsh The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 2021, 2021 | Demarec DCC-30-C | Used Hydraulic Shear 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Ledszlrqvopfx Albsah 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: A nice concrete crushing shear for 20-35 ton excavators. Jaw opening is 1,150mm. It has an Oilquick OQ80 quickcoupler. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41126 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Brinkmann SGL802 / 390-Z+002, serial number: 0411003202-61066001, unused, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Lodpfxsi D Hits Albeah

Condition: new, Brinkmann SGL802/1070-MV+313 submersible pump, serial number as shown in the photo, submersion depth: 107 cm, flange diameter: 25 cm, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Laodpfx Alji D Hizsbeh

Condition: used, Weiss Type: WK-480/40/10 Water-cooled climate testing chamber Test chamber lighting: Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 to ± 0.8 K Lasdpfjzgaipsx Alboh Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate: Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C: 8000 W Heat compensation at -20°C: 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % RH Temporal temperature deviation in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, Width 760 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1090 mm, Depth 2480 mm Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A, Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.