Used Multifunctional Ice Cream Machine, 5 L Per Cycle for sale (125,071)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe Chsdsy Uiyvspfx Albsb The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Chedpfx Aleynzg Hsbeb Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Chedoyzc Ruspfx Albob

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. Codpfx Aljxdmgvsbshb The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Chedpfx Asdpbn Aelbob Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device Chodeg Ewwrepfx Albjb -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Chsdpfx Ajy Ni Ivelbsb Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. Chodeyaywhepfx Albeb QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: Csdpfjx D Tbmjx Albshb X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards Chsdpfx Alsxz Dqgobsb

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Table lenght 2000 mm. Workingwidth: max. 230 mm / min. 18 mm. Workingheight: max. 150 mm / min. 8 mm el height adjustable Speed 7-36 m/min. 3,7 kw motor, cardan 5 pcs. Ø 40 mm. spindels: b + r + l + t + b (specifikations see file attached Siemens touchscreen see all technical features attached file Chodpfxexr U Azj Albjb

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Cedpfsv Ng E Tox Albshb Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: used, mileage: 12,829 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,780 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes-Benz Arocs 2681 L 6x2 Wiedemann Super 2000 8.0/5.0/1.0, Water Recovery System Bodywork * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling * 14,000-liter tank capacity * 1,000-liter fresh water compartment * 5,000-liter rinse water compartment * 8,000-liter sludge volume * Tank emptying by tilting at 45° Vacuum System * Wiedemann & Reichhardt KW 4000 * 4,000 m³/h * approx. 25 m suction hose DN 125 High-Pressure System * Uraca P3-45 65 413 liters/min at 175 bar Chodpfx Alsvh H I Eobsb * approx. 180 m HP hose DN 32 * Hydraulic reel with approx. 80 m DN 13 Additional Fresh Water System * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 15 m pressure hose DN 10 Special Features * Sludge tank made from material 1.4301 (stainless steel) * Suction and HP boom * 5-liter warm hand wash unit * Stainless steel toolbox * Control cabinet with display * Engine start controllable from the cabinet * NMV start controllable from the cabinet * Radio remote control with display * Equipment cabinet with two doors – on both sides * Hose storage tray * Noise insulation in pump compartment extended upwards * LED work lights * Central lubrication system Technical Data * Unladen weight: 19,170 kg * GVW (gross vehicle weight): 26,000 kg * Length: 9,970 mm * Height: 3,780 mm * Width: 2,550 mm Special Equipment: Axle load measuring system, front axle load 9.0 t, audio system: digital radio DAB/DAB+, right exterior mirror with maneuvering function, 220 Ah battery, interactive multimedia cockpit, electric pre-wiring in cab 24V/100A, driver assistance systems: high beam assistant and cornering light, traffic sign recognition, movable cab access, front suspension: 9.0 t, 4-leaf, remote online status check function, without trailer brake, without trailer coupling, speed limiter, 16-speed gearbox - type: G 280-16, independent gearbox lock, rear axle crown wheel 300, 3-piece mudguard with splash protection, 430 L aluminum fuel tank, right side, cooler/fridge, high-temperature cooling capacity, reinforced engine brake, steered liftable tag axle 9 t, navigation system, PTO - smooth flange, PTO independent and dependent on clutch MB 1,2, PTO MB 131-2c, programmable special module, rear frame overhang 1650 mm, rain sensor, acoustic reverse warning and exterior warning light, additional remote-control key (2), circuit breaker, seat covering: passenger and driver seat velour, seats: armrests for both passenger seats, comfort suspension seat for driver and passenger, exterior sun visor, additional 12V socket, 24V/25A socket in passenger footwell, additional 24V socket in passenger footwell, preparation for 4 surround cameras (display in dashboard monitor), preparation for additional headlights, twin-plate clutch, transmission oil cooler Further Features: Emission standard EURO 6, axle configuration: 6x2, heated front/entry mirror, 24V/15-pin trailer socket, Arocs 5, exhaust to right exterior, batteries mounted side-by-side, compressed air connection in cab, steel air tanks, air unit with condensate monitoring, medium air unit, automatic switch-on.

Condition: good (used), Year of construction: 2002, functionality: limited functionality, total length: 2,200 mm, total height: 1,600 mm, we offer as pictured!!! KEMPER bread roll line QUDRO KL 5-REIHIG Chodpfor Ezuhsx Albeb Item is used and incomplete (covering missing; conveyor belts missing) Length approx. 220 cm / height approx. 160 cm Year of construction: 2002 Manufacturer: KEMPER further information: see photos We offer the opportunity to view the machine on Tuesdays and Thursdays between 9 am and 4 pm by telephone appointment. If required, the item can be taken away immediately. All offers ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. More used gastro technology in stock!!! all dimensions are approximate

Condition: used, mileage: 42,400 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,720 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Arocs 2851 6x2-4 Wiedemann Super 1000 8.0/4.0/1.0-320, Water Recovery System Body: * Wiedemann enviro tec * Super 1000 8.0/4.0/1.0-320 Water Recycling System * 15,000-liter tank capacity * 500 liters fresh water * 4,000 liters jetting water * 8,000 liters sludge volume * Tank emptied by hydraulic tilting, 45° Vacuum System: * Wiedemann & Reichhardt KW 4000 * approx. 4,000 m³/h * approx. 25 m suction hose DN 150 High-Pressure System: * Uraca P3-45-65 approx. 413 l/min at 175 bar * approx. 180 m high-pressure hose DN 32 * Hydraulic hose reel with approx. 80 m DN 13 Additional Freshwater System: * Speck NP 25/50-150 approx. 50 l/min at 150 bar * Spring-loaded hose reel with 15 m pressure hose DN 10 Special Features: * Sludge tank made of material 1.4301 (stainless steel) * Retraction system for suction and HP booms (300 mm shorter) * Anchorage point for fall arrest device Chodpfx Aljvh H Rtebeb * 5-liter warm water hand wash unit * Stainless steel toolbox * Operator cabinet with display * Engine start controllable from operator cabinet * NMV start controllable from operator cabinet * Radio remote control with display * Equipment cabinet with two roller shutters (both sides) * Large heated wardrobe with roller shutter * Hose storage tray * Extended acoustic insulation for pump compartment * LED working lights * Central lubrication system Technical Data: * Unladen weight: 19,505 kg * GVW: 26,000 kg * Length: 10,170 mm * Height: 3,720 mm * Width: 2,550 mm Special Equipment: Axle load measuring system, front axle load 9.0 t, digital radio DAB/DAB+, passenger side mirror with maneuvering position, 220 Ah battery, interactive multimedia cockpit, electrical pre-installation in cab 24V/100A, driving assistance system: high-beam assist and cornering light, driving assistance system: traffic sign recognition, cab: movable entry, front suspension 9.0 t, 4-leaf, remote online query function, vehicle without trailer brake, vehicle without trailer coupling, speed limiter, 16-speed transmission - Type: G 280-16, transmission-independent gearbox lock, rear axle crown wheel 300, 3-piece mudguard, 3-piece mudguard with splash guard, 510 L aluminum fuel tank, right side, cooling box/refrigerator, cooling capacity for hot climates, reinforced engine brake, steered trailing axle 9 t, liftable, navigation system, PTO - smooth flange, PTO transmission-independent and clutch-dependent MB 1.2, PTO MB 131-2c, programmable special module, wheelbase version 4200 mm, frame overhang 1650 mm, rain sensor, acoustic reversing warning and external hazard warning light, extra remote control keys (2), circuit breaker, seat cover/upholstery: passenger seat velour, seat cover/upholstery: driver seat velour, cab seats: armrests both sides passenger seat, cab seats: comfort suspension passenger seat, cab seats: comfort suspension driver seat, exterior sun visor, additional 12V socket, additional 24V/25A socket in passenger footwell, additional 24V socket in passenger footwell, pre-wiring for 4 surround cameras (display in central monitor), pre-wiring for additional spotlights, twin plate clutch, transmission oil cooler For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Specifications subject to change, prior sale, and errors excepted.

Condition: new, power: 118 kW (160.44 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 7, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * IVECO 35C16H3.0 D truck, double cab 6+1, new model, 2026 * New vehicle with new three-way tipper * Wheelbase: 3450 mm * Gross vehicle weight: 3500 kg * 06520 - 12V, 13-pin trailer socket * 73239 - Preparation for EC tachograph D 4.1 * 07638 - Reversing warning sound, can be deactivated * 08628 - Roof rack above the windshield * 79247 - USB socket on driver and passenger side - charging port * 77742 - Grab handle on A-pillar * 07820 - Trailer coupling, ball head * 01565 - Fuel tank 86L * 02210 - Spare wheel, same dimensions as chassis tires * 00726 - Spare wheel storage at the end of the frame * 06094 - Trapezoid spring with auxiliary spring, rear axle * 76104 - Air conditioning Cedpfezd Ixgex Albshb * 07196 - Air conditioning compressor 170ccm * 00259 - Comfort driver's seat with armrest and lumbar support, hydraulically sprung * 79336 - Radiator grille with chrome inserts * 02443 - Leather steering wheel with function button for radio, telephone, menu * 72619 - Steering column adjustable in height and inclination * 72841 - Light and rain sensor * 06555 - Fog lights * 01606 - Digital DAB radio with 7-inch touchscreen * 00676 - Rear view camera with dynamic lines * 75082 - Passenger bench with multifunctional storage compartment * 05925 - Additional programmable speed limiter * 00190 - Protection for oil pan * 6-speed * DIMENSIONS OF THE PLATFORM AND STANDARD EXTERNAL DIMENSIONS OF THE PLATFORM: 3130 x 1980 mm M.C.T.C. APPROVAL AND ISSUANCE OF THE CE CONFORMITY DECLARATION STANDARD TECHNICAL FEATURES * HYDRAULIC SYSTEM WITH ELECTRO-HYDRAULIC UNIT AND REMOTE CONTROL * PLATFORM MADE OF 3 MM THICK SHEET METAL (ONE-PIECE) * NOTE: SIDE WALLS MADE OF ALUMINUM, TYPE TR5 | THICKNESS 40 MM AND HEIGHT 400 MM * FRONT WALL MADE OF SHEET METAL, HEIGHT 500 MM * REMOVABLE/FORMED FRONT HEADBOARD WITH CAB PROTECTOR PLATE * RUBBER PROTECTION ON THE FRONT HEADBOARD * REAR HEADBOARD WITH UPPER RUBBER PROTECTION * 1 TOOLBOX, 750 MM, MADE OF THERMOPLAST * 2 SIDE WIRE WINCHES * NON-APPROVED TRAILER COUPLING * PAIR OF PROTECTIVE GRILLES FOR THE REAR LIGHTS * PAIR OF REAR MUD FLAPS MADE OF RUBBER * We would be happy to create a personalized financing/leasing offer for you! Please contact us! * Sale only to commercial customers * or for export. Subject to prior sale * and errors and omissions excepted.

Condition: good (used), mileage: 228,791 km, power: 90 kW (122.37 HP), first registration: 01/2022, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 4,500 mm, total width: 1,850 mm, total height: 1,850 mm, loading space length: 910 mm, loading space width: 1,470 mm, loading space height: 1,270 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, = Additional options and accessories = - Heated mirrors - Tinted windows - None - LED lamp - Alloy wheels - Manual - Radio/cassette - Lane keeping assist - Fabric - Partition = Notes = Configuration: 4x2, Tare weight: 1543 kg, Gross vehicle weight: 2250 kg, Alloy wheels, Type of cab: Double cab, Cruise control, Air conditioning, Number of airbags: 4, Rear windshield wiper, Parking assist: Front and rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: Silver, Metallic, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Engine power: 90 kW (121 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: Standard, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Double door, Central locking, Number of seats: 5, Seat arrangement: 2+3, Seat upholstery: Fabric, Seat adjustment: Manual, L1 Combi 5-seater, Automatic transmission, Navigation, 2 sliding doors, Cruise control, Alloy wheels, 122 hp, Euro 6, Tire type: Summer tires = Further information = General information Number of doors: 2 License plate: KLEYN1 Axle configuration Tire size: 205/60R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Weights Unladen weight: 1,543 kg Payload: 707 kg GVWR: 2,250 kg Functional Loading area height: 60 cm Chsdpfx Aszw T Rnelbsb Maintenance APK (technical inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial information Leasing price: €292 per month (delivery van, 72 months); Please inquire for further information and conditions.

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO ME Series mobile sand screening plant is an ideal solutions for the classifying materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 9 m3 - Plant Dimensions: 14130x4600x4160 mm Cedpfx Alszx U I Rsbjhb - Production Capacity: 200-300 Tons Per Hour - Vibrating Screen and Deck: 2000x5000 (4 decks) - Total Motor Power: 65 Kw - Generator (optional): 100 kvA ME-2050 IS A COMBINATION OF: • Bunker (Hopper) • High Stroke Vibrating Screen • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Format: 0x0 Codpfx Ajy Dudxolbohb Equipment: 2 spindles

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package Cedpfxjk Dpp So Albjhb ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: used, mileage: 101,692 km, power: 228 kW (309.99 HP), first registration: 12/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2007, Equipment: ABS, air conditioning, crane, = Additional options and accessories = Codpfjzxc Sqjx Albohb - Tipping hydraulics = Remarks = Crane Rotator: ✓ Clamshell bucket: ✓ = More information = Front axle: Steering Rear axle: Double wheels Crane: TLC 105.2, behind the cab

Condition: excellent (used), power: 109 kW (148.20 HP), fuel type: diesel, color: other, number of seats: 1, first registration: 08/2012, Year of construction: 2012, operating hours: 12,915 h, Equipment: air conditioning, = Additional options and accessories = - Day Cabin - Radio = Remarks = Condition CE type: CE = More information = General information Cab: day Technical information Number of cylinders: 4 Engine capacity: 4.460 cc Track width: 2.380 cm Engine type: KOMATSU SAA4D107E-1A Empty weight: 21.200 kg Dimensions (LxBxH): 9430 x 2980 x 3040 cm Functional Number of valves: 2 Quick coupler system: Yes CE mark: yes Chsdjzw Dy Tepfx Albeb Condition Technical condition: very good Visual appearance: very good

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU commercial vehicle center in Germany offers competence, service, and advice: ISUZU M30 H with automatic transmission + torque converter with adjustable width tipper body from Meier-Ratio for containers from 1.5 to 10 m³ 2-year warranty on the base vehicle from the date of initial registration PAYLOAD: 3,200 kg with a gross vehicle weight of 7,490 kg or optionally 4,200 kg when upgraded to 8,500 kg Equipment: - 5.2 L turbo diesel with common rail direct injection, 140 kW / 190 PS EURO VI OBD-E (max. torque 510 Nm at 1,600 - 2,800 rpm) - Particulate filter system with DPD and AdBlue - Automatic transmission (NEES II) with 6 gears and torque converter. A wear-free and finely adjustable starting process is provided by a fluid coupling! The gears can also be shifted manually on the gear selector lever. - Leaf spring suspension, front axle (max. 3,100 kg), leaf spring suspension, rear axle (max. 5,800 kg), stabilizer bar front and rear - Tires 215 / 75 R17.5 C M+S, single tires front - Twin tires on the rear axle, spare wheel - Ventilated disc brakes front and rear - Wheelbase 3,365 mm Codsxlvynopfx Albjhb - Engine brake, electronic parking brake with Auto Hold - On-board voltage 24 V, generator 90A, 2x battery 90 Ah - Diesel tank 80 L / AdBlue tank 16 L - New and modern cab with excellent use of space, generous headroom, and ample knee room, excellent ergonomics and visibility, low entry height. - BI-LED lighting front, LED lighting rear - Storage compartments in the door panels and on the headliner, armrests in the door panels - Cab color: Arc White 729 - Vehicle dimensions: Width cab 2,040 mm, width rear axle 2,115 mm, height cab 2,265 mm (center of cab), turning circle 12.60 m - Suspended driver's seat, passenger double seat, 3-seater, headrests, seat belt warning - Driver and passenger airbags, seat belt pretensioners for driver and passenger - Height and tilt adjustable steering wheel, interior mirror - Electric windows - Electrically adjustable and heated exterior mirrors - Electronic immobilizer - Double-DIN DAB+ radio 6.8 inches with hands-free system, Apple CarPlay / Android Auto compatible, USB charging port - Driver information display 7 inches - Steering wheel controls - Daytime running lights, LED - Rear warning signal - Central locking with remote control - EG - Control unit - Air conditioning Equipment Safety Pack 2: - ABS: Anti-lock braking system - ASR: Anti-slip control on the rear axle - EBD: Electronic brake force distribution - EVSC: Electronic stability control - LDWS: Lane departure warning system - MOIS: Moving object detection - DWS: Distance warning system - MAM: Emergency braking in front of an obstacle - FVSN: Front vehicle detection - TSR: Traffic sign recognition - TPMS: Tire pressure monitoring system - RM: Rear view camera with monitor - AEBS: Autonomous emergency braking system - AEBS: Autonomous emergency braking system for pedestrians and cyclists - Intersection warning: Junction hazard warning system - Intersection AEBS: Autonomous emergency braking system at intersections - BSIS: Blind Spot Monitoring System Vehicle body: - Tipper body for tipper containers from 1.5 m³ to 5 m³ capacity according to DIN 30735, and for tipper containers from 4 to 10 m³ capacity according to DIN 30720-1 - Lifting capacity 5,500 kg - Body width variable for different container systems, by hydraulic spreading of the sliding frame - Tilting hook with automatic locking through curve guidance - Hook operation hydraulic via stainless

Condition: used, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2023, operating hours: 950 h, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX3 pile driver with Automatice Leveling, is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-3 provides superior control and precision, even in challenging terrains. Chsdpfx Alezwm Elsbjb 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, Siemens Teleperm M 6DS1731-8AA E4+5 with C79458-L439-B8, unused, 100% functional, in opened original packaging. Csdpfx Aozu E Imjlbohb