Used Marble Plate for sale (10,788)

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: ASQUITH Type: DRG Year of manufacture: 1980 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 350 mm Number of T-slots 8 Distance between T-slots / step 240 mm T-slot size 35 mm Number of matching pieces 1 Dimensions (estimated) Length 5000 mm Gbjdpfx Anewp Eqyj Rsl Width 2000 mm Height 350 mm Weight 7500 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms arise from it. We recommend verifying all important details.

Condition: good (used), total length: 6,000 mm, total width: 2,000 mm, plate height: 510 mm, Manufacturer: STOLLE Type: Cast iron Year of manufacture: 1990 Specifications Metric US Standard Length 6000 mm Width 2000 mm Height 510 mm Number of T-slots 8 T-slot spacing / pitch 250 mm T-slot size 36 mm Weight per plate approx. 9500 kg Dimensions (estimated) Length 6000 mm Width Godewp Hxfepfx An Robl 2000 mm Height 510 mm Weight 14500 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you verify all critical details. Share on

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Gbjdpfxskwcc Nj An Rsl Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: excellent (used), overall weight: 6,000 kg, total height: 400 mm, total length: 4,510 mm, total width: 1,815 mm, plate height: 400 mm, plate width: 1,815 mm, Floorplate Length: 4510mm Floorplate Width: 1815mm Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:285mm T -slot size: 36mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 4510mm Width: 1815mm Height: 400mm Gbodoyg Icrepfx An Rjl Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, overall weight: 6,000 kg, total height: 245 mm, total length: 5,990 mm, total width: 1,250 mm, Floorplate Length: 6000mm Floorplate Width: 1250mm Height: 245mm No. Of T-slots: 5 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Length: 5990mm Gbodpfx Ajxdltujn Rjl Width: 1250mm Height: 245mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1990, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, Length:3500mm Width:1750mm Height:350mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gsdox Hwl Depfx An Rjbl

Condition: good (used), total length: 4,010 mm, total width: 2,100 mm, plate height: 200 mm, Manufacturer: STOLLE Type: RDG Year of manufacture: 1980 Specifications Metric US Standard Length 4010 mm Width 2000 mm Height 220 mm Number of T-slots 13 T-slot distance / pitch 400 mm T-slot size 35 mm Weight per plate approx. 5.3 tons Dimensions (estimated) Length 4010 mm Width 2100 mm Height 220 mm Weight 5300 kg Please note: The information on this page was provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract conditions. We recommend that you check all important details. Gedpfx Aowp Dhdjn Robl

Condition: good (used), total length: 3,500 mm, total width: 1,100 mm, plate height: 250 mm, Manufacturer: ASQUITH Year of manufacture: 1990 Specifications Metric US Standard Length 3500 mm Width 1100 mm Height 250 mm Number of T-slots 6 + 3 T-slot spacing / jump Gedpfx Aewp Hacsn Robl 365 mm T-slot size 48 mm Weight per plate approx. 2900 kg Number of matching pieces 1 Dimensions (Estimate) Length 3500 mm Width 1100 mm Height 250 mm Weight 2900 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contract terms are made. We recommend checking all important details.

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 450 mm Plate thickness: - mm weight of the machine ca.: 5,9 t transport dimensions LxWxH: 4,0 x 1,5 x 0,45 m Gjdpfx Aney Rru Ij Rjbl There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Plate-type boring mill MFS with Siemens 840D control. Travel distances: 13200x3000x1200 Gedpfxsy Rgt Ee An Rsbl

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL Gjdoy Raitopfx An Rjbl cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - original instruction manual

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW Gbodpfey Raimex An Rjl weight 1100 kg From a maintenance workshop In good condition (!!) Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 1988, Technical details: floor-plate length: 4000 mm plate width: 2000 mm plate height: 460 mm weight of the machine ca.: 6000 kg 2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm Gjdpfx Anju N Druo Robl The plates are equipped for lateral fixing. *

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 28450 € 543.4 € 1550 mm 7 mm Gbjdpfx Aoyb Szhsn Rol 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: used, Straightening and welding plate made of steel Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Net weight: 2175 kg Gbsdjy N Du Rspfx An Rsl

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Clamping plate: Scribing and marking plate -Length: 800 mm -Width: 800 mm -Height: 128 mm -Sheet thickness: 23 mm -Quantity: 1 mounting plate available -Price: per piece -Transport dimensions: 800/800/H128 mm Gsdpfx Aey N Arujn Rebl -Weight: 136 kg

Condition: ready for operation (used), Year of construction: 2020, Immediately available ex location: Gedey R Racepfx An Rsbl As-new PLANOLITH surface plate, DIN 876/1 Year of manufacture: 20020 With original stand Dimensions: 1500 x 1000 x 400 mm Weight: 1100 kg Price: EUR 1,250 plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1985, Immediately available ex location: Three-roll plate bending machine MD Durst Model RWASV 2505 Year of manufacture: 1985 Bending length: 2,550 mm Gbsdsy R N Hnepfx An Rjl Material thickness: up to 5 mm Automatic pre-bending Drive: 7.5 kW Weight: 4,600 kg Price: EUR 4,750 plus VAT, ex location

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings Gedpfoyv N E Ujx An Rsbl - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 2100 mm plate thickness 40 mm pre-bending 30 mm upper roll diameter 390 mm lower roll diameter 360 mm side roll diameter 300 mm total power requirement 22 kW Gjdpfxeyv Nt Es An Rebl machine weight ab. 17200 kg Overall size 5060 x 2200 x 2180 mm

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel Gsdpfjyv Nh Nex An Rjbl - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 10 mm Gbodpeyv Nhcofx An Rjl pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm total power requirement 11 kW weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm side roll diameter 120 mm total power requirement 2,2 kW Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. Gedpjyv Nf Usfx An Rebl - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 2100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm lower roll diameter 210 mm side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel Gbjdpfxjyv I Ubj An Rjl - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear Gbodsyv I Smspfx An Rol driven. (Top and bottom rollers) - Calibration