Used Marble Plate for sale (11,799)

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Nwsdpfx Aezwxazod Rek Delivered with 12 leveling feet Weight : 6,3 T

Condition: good (used), Marble plate STIEFELMAYER Nwedszwxabjpfx Ad Rsk Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available.

Condition: used, Cast iron bed Length: 2300 mm Nwedpfx Aozwxbfod Rsk Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Order number: 221881-1 Weight: 855 kg Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Checked on: 2016-11-09 Njdpszgw D Rofx Ad Rewk If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Nedpszmxrijfx Ad Rewk Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Nwsdpfjzmxq Eox Ad Rok Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Nwodpszmxqxofx Ad Rek Equipped with Levelling feet Weight: approx 3 T

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Njdsywziuspfx Ad Rswk

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop Nsdey Aubuopfx Ad Rewk

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm Nwedpfx Adswk Rlxj Rok max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: good (used), Year of construction: 2001, overall weight: 8,500 kg, total height: 350 mm, total length: 5,000 mm, total width: 2,500 mm, plate height: 350 mm, plate width: 2,500 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - DTR MACH-ID 9790 Make: STOLLE Type: DTR Year: 2001 8 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Floorplate Length: 5000mm Floorplate Width: 2500mm Height: 350mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm Nodpszw E Hzofx Ad Rewk T -slot size: 36mm Weight a plate approx.: 8500kg Number of matching pieces: 1 Length: 5000mm Width: 2500mm Height: 350mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 8,000 kg, total height: 370 mm, total length: 5,000 mm, total width: 2,250 mm, plate height: 370 mm, plate width: 2,250 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - RDT MACH-ID 9791 Make: STOLLE Type: RDT Year: 1990 12 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Floorplate Length: 5000mm Floorplate Width: 2250mm Height: 370mm No. Of T-slots: 7 Distance from T to T-slot / Jump:320mm T -slot size: 41mm Weight a plate approx.: 8000kg Number of matching pieces: 1 Nwjdpfx Adezw E A Ne Rjk Length: 5000mm Width: 2250mm Height: 370mm Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 3,900 kg, total height: 300 mm, total length: 3,520 mm, total width: 2,000 mm, plate height: 300 mm, Floorplate Length: 3520mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 3900kg Number of matching pieces: 1 Length: 3520mm Width: 2000mm Nodpjzw Ezrefx Ad Rswk Height: 300mm Weight: 3900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Nwjdpfx Adezw Eyzj Rek Very little used, new price EUR 200.000     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm Working height approx. 700 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one plate edge Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Nwsdpfoh Uhq Dsx Ad Rok Very good condition

Condition: used, 3-D coordinate measuring machine ZEISS NUMEREX - non-functional Granite measuring table, granite measuring plate, measuring table Nwsdpfofy U Ewox Ad Rek Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Measuring probe mount Ø 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z axis - Plate on substructure with 5 adjustable feet, 3 support plates for the adjustable feet - Computer and software missing (not included and not part of the scope of delivery) → non-functional! Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Condition: used, Year of construction: 2007, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Colour: Blue Empty weight: 11.500 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 600007090 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 Nwsdpfjzw A Suex Ad Rek - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), HARTGESTEIN measuring and control plate DIN 876/1 with substructure Dimensions: Nodpfjzati Rox Ad Rewk Length: 800 mm Width: 600 mm Thickness: 120 mm Height with substructure: 890 mm Accuracy: DIN 876/1

Condition: good (used), Permanent circular magnet with star-pole arrangement Technical data: Diameter: 350 mm Central through-hole diameter: 40 mm Features: Flange with Camlock fitting, size 6, diameter: 315 mm Condition: good, technically inspected Nsdpfx Adezrgy Ss Rswk

Condition: good (used), PERMANENT CIRCULAR MAGNET with radial pole pitch Nwsdpfx Aszi A U Tsd Rek Technical data: Diameter: 500 mm Height: 80 mm Features: Flange D: 370 mm, ISO50, M24 for KELLENBERGER cylindrical grinding machine Condition: good

Condition: new, functionality: fully functional, UNUSED / new / like new Vibrating table, manufacturer: BERGER Type: BE-1200x1200 Power: 400 VOLT 2x asynchronous three-phase imbalance motors Nwodpfsvrl Ufjx Ad Rsk Includes operating manual / documentation! The unit can be inspected at my warehouse by appointment. Shipping and loading are, of course, possible!

Condition: like new (used), functionality: fully functional, 2x 2.92m2 Plate Heat Exchanger and Miscellaneous Spares (Unused) 1x plate type condensate blowdown cooler, surface 2.9M2 SA-516 GR.70N material 13 barg design pressure -20 / 150 deg c design pressure 12 plates E1958 Tag 1x plate type process steam condensate cooler, surface 2.9M2 SA-516 GR.70N material 14 barg design pressure -20 / 150 deg c design pressure 12 plates E2901 Tag Nedpfszwx Tnex Ad Rswk 2x tightening bar E1958 SL002, E2901 SL002 Part No 10x gasket EPDM E1958 SL001, E2901 SL001 Part No 2x startup & commissioning spares E1958-1, E2901-1 Part No

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM Nodszwuu Ujpfx Ad Rjwk depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: used, Technical details: Length: 400 mm width: 200 mm height: 150 mm weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm Nedju N Dr Iopfx Ad Rswk *

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Specifications and technical data Cutting length: 5,300 mm Cutting height: 2,200 mm (trimming height 2,110 mm) Cutting depth: max. 60 mm Extraction system: - Saw unit 120 mm - Frame width 100 mm Workpiece support: - Sturdy plastic support for optimum stability, even for narrow workpieces. - Chips are removed via slanted slots. Lift-roller transport system: Manual, for light and gentle transport of materials Clamping: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: carbide-tipped, 250 mm, hollow roof-tooth, Z48 Saw motor: 4 kW at 5,450 rpm, 400 V, 50 Hz Tilting table: including workpiece support for narrow parts (5 positions) Includes strip stop with Supercut scoring device Extraction system in accordance with BG TRK guidelines (less than 2 mg of fine dust per m³ of air) Nwedpfx Adszk N S Ie Rek Availability: at short notice Storage location: 63934 Röllbach