Used Mafi 1160 for sale (268)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,160 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, table width: 610 mm, table length: 1,320 mm, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 7,000 kg, tool length: 200 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine was not used for mass production. Accuracy: ±0.01 mm. It has been regularly maintained, both electronically and mechanically, e.g., new ball screws were installed one year ago. Equipped with an oil mist separator. It is in daily use until the end of June 2026 (and can be viewed in operation until then). Iedpey T Nggsfx Aa Ejaw Net price.

Condition: used, mileage: 336,000 km, power: 368 kW (500.34 HP), first registration: 04/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * MAN TGX 18.500 4x2 BLS tractor unit * Euro 6 * Automatic transmission * Intarder * Adaptive Cruise Control (ACC) * Lane Guard System (LGS) * XXL cab with 2 bunk beds * Leaf/air suspension * Tyres 315/70 R22.5 * Differential lock * PTO pre-installation * 2 fuel tanks, total 1160L (580+580) * Refrigerator compartment * Automatic climate control * Auxiliary heater (parking heater) * Radio/CD/navigation system * Electric windows (EFH) * One owner * Service book/inspection log Ijdpoyrlc Hefx Aa Esaw

Condition: excellent (used), electropneumatic positioner (29590) Iedpfovx E Skjx Aa Eeaw Make ABB Serial number 880558 Type TZIDC 18345-2011160001 unused, in opened original packaging

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools Isdpfx Aaoy Rumys Ejaw - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Iasdey Rulvopfx Aa Eow Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Stock machine // Subject to prior sale CNC-controlled press brake in all-steel welded construction with DELEM DA66S control, HAWE hydraulics, Fiessler AKAS II laser safety system, and CNC-controlled table crowning Technical data: - Maximum pressing force: 160 tons - Bending length: 3100 mm - Bending length between uprights: 2550 mm - Throat depth: 410 mm - Table width: 60 mm - Table height from floor: 870 mm - Installation height: 530 mm - Max. ram stroke: 260 mm - Closing speed: 200 mm/sec - Pressing speed: 10 mm/sec - Return speed: 160 mm/sec - Max. backgauge travel (X axis): 750 mm - Max. backgauge travel (R axis): 150 mm - Backgauge traverse speed in X axis, servomotor: 330 mm/sec - Backgauge positioning accuracy: +/- 0.03 mm - Motor power: 15.0 kW - Oil tank capacity: 180 l Equipment / Standard accessories: - CNC control “DELEM DA66S” for user-friendly graphical product programming. The controller calculates the bending sequence and all axis positions (including collision warning) at the push of a button, 24” TFT color touchscreen display, USB interface, network connectivity, and tool database for 100 punches and dies each. Graphical 2D programming, 2D preview during operation, up to 12 axes plus auxiliary functions. Includes PC programming software “Profile - TL" and remote service (teleservice) via TeamViewer. - Manual quick-clamp system for upper tools, Promecam/AMADA type, with screw lever, safety nose, and plastic pressure bar for secure clamping, even with narrow tools. Max. load: 100 t/meter - Split upper tool, "Amada System," manufacturer Italy, material C 50 (HRC 50-52), induction hardened and ground on work faces. Bending capacity: 100 t/meter. Standard delivery, division: 3 x 835 mm, horns left and right 100 mm each, remainder in smaller segments. Height: 66.6 mm - Lower tool / 4-way prism block CroMo 4, ground, 60x60 mm, standard V-openings: 16 - 22 - 35 - 50 mm - Modern design for side and top covers - Side safety covers with magnetic closure for quick opening/closing during tool changes - 2-axis backgauge system with ball screw drives and servo motors, CNC controlled, max. X-axis range 750 mm, R-axis 150 mm. Positioning accuracy +/- 0.03 mm, traverse speed: 330 mm/sec. Includes 2 laterally adjustable stop fingers. - "FIESSLER" double-beam laser safety system, type AKAS/LCII. Operation of the press only possible via foot pedal. Manually adjustable via linear guides in both vertical and horizontal axes for extremely easy and quick adjustment after tool changes. - Automatic motorized table crowning system WILA, integrated into the CNC - Front sheet supports (2 pcs) laterally movable on linear guides, height-adjustable by handwheel - Central lubrication with hand pump - Spring-back compensation via CNC - Oil fill Ijdpfx Aey Anftoa Ejaw - Operating manual in German with spare parts list - Hydraulic manifold, valves by HAWE/HOERBIGER - Hydraulic pump: tandem pump by HAWE - Relays and contacts: Schrak, Pilz, Siemens, Eaton or Telemecanique - CE conformity - Operating hours counter - Dual-color paintwork: Body RAL7015 slate grey; covers, swing arm and controller housing: RAL7035 light grey; support arms and front of side covers

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 260 mm, throat depth: 410 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19, working width: 3,100 mm, bending force (max.): 160 t, distance between stands: 2,550 mm, control type: CNC control, degree of automation: automatic, Baykal APHS PRO 31160 CNC Press Brake The Baykal APHS PRO 31160 is a CNC-controlled press brake with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser protection (AKAS / LCII), and a CNC-controlled crowning table. Operation is via a Cybelec 2D CNC control unit. Technical specifications: Press force: 160 t Bending length: 3,100 mm Bending length between uprights: 2,550 mm Throat depth: 410 mm Table height: 870 mm Max. ram stroke: 260 mm Motor power: 15 kW Oil tank capacity: 180 l The 2-axis backgauge (X-R) is driven by AC servo motors and provides a positioning accuracy of ±0.03 mm. Travel range: X = 1,000 mm; R = 160 mm; travel speed: 330 mm/s. Two laterally adjustable stop fingers are included. Equipment: - Cybelec 2D CNC control Ijdpoyrf Upjfx Aa Eoaw - Fiessler AKAS / LCII laser safety - Automatic motorized crowning table (WILA system) - Segmented upper tooling, Amada system - Manual quick-release clamping system Promecam / AMADA - 2 front sheet supports, laterally adjustable - Central lubrication - Operating hours counter - CE compliance Machine details: Year of manufacture: 10/2025 Serial number: 31865 Dimensions (L×W×H): 3,820 × 1,800 × 2,700 mm The machine is in stock and available for immediate delivery. Warranty: 12 months for single-shift operation.

Condition: good (used), Gemac shelving system, type Normafix, approximately 1000 meters available. Dimensions: 131 x 120 x 230 cm. Uprights: powder-coated, blue. Shelves: galvanized. Bay width: 1310 mm. Shelf depth: 1200 mm. Shelf height: 2300 mm. 7 shelves per bay. Shelf load capacity: 200 kg. Bay load capacity: 1400 kg. Approximately 750 units available. The price refers to: 13.10 meters. 22 uprights. Iedpfx Aajgxpqpo Eoaw 70 shelves. Includes securing and fastening materials.

Condition: new, Year of construction: 2026, functionality: fully functional, Eccentric press 160t / 1600kN Iedpfswir U Eex Aa Eoaw Siemens 1200 PLC Adjustable stroke 16–160mm Ram adjustment 100mm Ram plate 740 x 420mm Ram plate thickness 100mm Table plate 1250 x 700mm Table plate thickness 180mm Motor 15kW Weight 16,000 kg For new machines, delivery time approx. 4–5 months.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg Iasdpfsyqw Sqox Aa Eow EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS Press force: 160 t Bending length: 4100 mm Distance between uprights: 3100 mm Iasdpfx Ajlp Iq Rja Eew Control system: DELEM DA66W Table width: 120 mm Stroke: max. 800 mm Downstroke speed: 80 mm/sec Upstroke speed: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS Oil capacity: 185 l Total power consumption: 24 kW Machine weight: approx. 13 t Space requirement: approx. 4.8 x 2.2 x 2.2 m

Condition: new, Pressure Controllers RT-116 017-520366 / RT200 017-5237 / RT5A (AMMONIA) 017-504666 / RT112 017-519166 / Iajdpfx Asum Rlboa Esw

Condition: excellent (used), Year of construction: 2013, Mode of operation: continuous operation with intermittent pauses Type of current: three-phase AC Frequency [Hz]: 50 Power consumption [kW]: 4 Supply voltage [V]: 3 × 400 V Number of filter bags / filter cartridges: 18 / Plitex Filter material: polyester felt 973010, dust class M, d = 160 × 1503 mm Filter area [m²]: 73.8 (4.1 m² per filter cartridge) Weight [kg]: approx. 700 Filter cleaning: compressed-air pulse cleaning Compressed air connection: standard NW7 quick coupling  – compressed air must be dry and oil-free  – Maximum pressure: 8 bar, Nominal pressure: 6 bar Iajdpfx Aexup Auja Eow Compressed air consumption: approx. 360 normal litres per cleaning cycle Ambient temperature [°C]: 5–40 Maximum sound pressure level [dB(A)]: less than 70 Conveyed medium: air with solid particles Minimum operating temperature [°C]: 5 Residual dust content [mg/m³]: < 0.2 Maximum operating temperature [°C]: 45 Type of solids: salt-containing dust up to 2 mm particle size Maximum Kst value [bar·m/s]: 200

Condition: used, functionality: fully functional, Agilent 1100 series G1160A 12/13 Sel Valve. Iedsuav I Hjpfx Aa Ejaw The Agilent 1100 Series valves provide the user a comprehensive solutions for more flexibility through solvent selection and column selection. They offer new automation capabilities for sample preparation as well as higher sample throughput with alternating column regeneration. The Agilent 1100 Series valves are fully integrated in the CAN environment (control area network) of the Agilent 1100 Series LC system and can be controlled by the Agilent ChemStation Software. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Agilent 1200 series G1160A 12/13 Sel Valve. The Agilent 1200 Series valves provide the user a comprehensive solutions for more flexibility through solvent selection and column selection. They offer new automation capabilities for sample preparation as well as higher sample throughput with alternating column regeneration. The Agilent 1200 Series valves are fully integrated in the CAN environment (control area network) of the Agilent 1200 Series LC system and can be controlled by the Agilent ChemStation Software. Liquid contacts: Stainless steel and PEEK Port size: Accepts 10-32 male threaded fittings Flow passage diameters: 1.0-mm (0.040”) Volume in flow passage: Stator (includes stator face seal) 6.4 µl/hole, rotor seal 4.0 µl/groov Maximum pressure: 21 MPa (207 bar, 3000 psi) Iaodpfx Ajuavnyea Eow Recommended flow range: 0.2 – 100 ml/min (at high pressures, after the pump) 0.2 – 10 ml/min (at low pressures, in front of the pump 2 for sale. 1 piece/890 EUR. Good working condition. Please check out our other listings as well.

Condition: used, This listing is for a Labcold Blood Bank RDBB11601 Laboratory Refrigerator. Ijdpoxx Awtofx Aa Eoaw The unit is in full working condition and is ready for immediate release. .

Condition: new, empty load weight: 540 kg, maximum load weight: 960 kg, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 900 mm, loading space volume: 3.6 m³, color: silver, construction height: 1,620 mm, working width: 1,670 mm, E-hydraulics / 60cm grid attachment / H-frame for front, automatic reverse drive, hot-dip galvanized, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / 60cm grid attachment / H-frame for front Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1,500 kg - Unladen weight: 540 kg - Payload: 960 kg - Interior dimensions: 250 x 150 x 90 cm (L x W x H) - Overall exterior dimensions: 383 x 167 x 162 cm (L x W x H) - Loading sill height: 72 cm - Tyres: 185/70R13 steel rim - Brake: yes - Support wheel: yes - Automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: sheet steel on wood, Finnish multiplex board - Side walls: anodized aluminium double-walled, 3x foldable & removable - Side wall height: 30cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: yes, reverse - Hydraulics: electrically tiltable - Tipping angle: approx. 45 - Steps hydraulic cylinder: 2 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded, hot-dip galvanized steel frame - Attachment: Yes, 60cm swinging grid attachment, high front grid - Lashing eyes: 4 in the floor - Supports: at extra charge - Ramps: at extra charge Ramps: at extra charge - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Removable drop sides - Steel plate on wooden floor in Finnish quality - Removable front H-frame - E-hydraulics with battery - Sturdy welded steel frame - Completely hot-dip galvanized frame - Many options available hot-dip galvanized - many sturdy cross members for high point loading - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 4 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle - registration papers: COC papers Special equipment included in the price: - Original corrugated grid attachment all round, 60cm high, swinging, removable incl. tensioning locks Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Iedpfxsu Hr Huj Aa Esaw

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Washing Temperature: Up to 95°C for thermal disinfection. Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. Ijdjxhgd Njpfx Aa Eoaw RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: 400V (3-phase, 7.0 kW) 230V (single-phase, 2.8 kW)

Condition: new, functionality: fully functional, Year of construction: 2026, (Punching) Max. punch diameter x plate thickness: 34 x 26 mm / 55 x 16 mm Iaodozmh Duopfx Aa Eow Stroke length: 80 mm Throat depth: 405 mm Working height: 1070 mm Bar shear Round/Square: 55 / 50 mm Working height: 1250 – 1160 mm Angle shear (90°): 160 x 160 x 16 mm Angle shear (45°): 80 x 8 mm Working height: 1190 mm Flat bar shear: 380 x 25 mm ; 600 x 15 mm Blade length: 610 mm Miter cutting (vagy: Angle cutting): 120 x 12 mm Working height: 905 mm Notcher material thickness: 13 mm Width: 60 mm Depth: 100 mm Working height: 940 mm Motor power: 11 kW Punching force (vagy: Pressing force): 115 t Length: 2045 mm Height: 2030 mm Width: 770 mm Working height: 1070 mm Weight: 3150 kgs

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: unused, without controls -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Quantity: 3 pieces available Iodpfx Ajzbk Tija Eoaw -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Condition: good (used), mileage: 690,336 km, power: 316 kW (429.64 HP), first registration: 03/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Heated Mirrors - Digital Tachograph - Trip Recorder (Control Unit) - Fixed - Halogen Lamp - Manual - Radio/Cassette - Sleeper Cab - Lane Departure Warning System - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Payload: 10252 kg, Tare weight: 7748 kg, Gross weight: 18000 kg, Total tank capacity: 1160 liters, 2nd Diesel Tank, Saddle coupling height: 112 cm, Saddle coupling: Fixed, Number of locks: 1, Winch pulling capacity: 2 tons, Suspension type: Air suspension, Type of cab: Sleeper Cab, Cruise control, Trip recorder (Control Unit), Digital Tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane Departure Warning System, Climate control, Seat heating, Bluetooth, Engine power: 316 kW (424 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: Traxon, Gears: 12, Power steering, ABS, ASR, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: TRA, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 1 mm; Tire tread depth right: 3 mm; Suspension: Leaf suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 2 mm; Tire tread depth left outer: 3 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 3 mm; Suspension: Air suspension Weights Tare weight: 7,748 kg Payload: 10,252 kg GVW: 18,000 kg Interior Number of seats: 2 Iaodpfxszln I Rj Aa Ejw Maintenance APK (Technical Inspection): Valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €403 per month (default, 60 months); Please inquire for more information and terms Identification License plate: 75-BSV-9 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various model years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, Minipack Tunnel 70 The Minipack Tunnel 50 is a well-insulated and quiet two-chamber shrink tunnel designed for wider and taller products. – Shrink tunnel for various packaging requirements – Suitable for different types of shrink films – Power supply: 400 V, 50/60 Hz, 3-phase – Installed power: up to 14.5 kW – Max. product dimensions: 680 × 390 mm (variable length) Iajdpfsyaqihex Aa Ejw – Tunnel entry: 690 × 390 mm (W x H) – Machine dimensions: 2770 × 1160 × 1640 mm (L x W x H) – Machine weight (net/gross): 415 / 483 kg

Condition: good (used), loading space length: 8,900 mm, loading space width: 1,720 mm, loading space height: 2,130 mm, color: red, Year of construction: 1997, operating hours: 905 h, General information Field of application: Construction Drivetrain Type of fuel: Electric Make of engine: Hatz Weights Empty weight: 3.500 kg Functional Mast: telescopic Lifting capacity: 200 kg Lift height: 2.600 cm Working height: 2.800 cm Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information TÜV Marked: yes Reconditioned: Yes Delivery terms: EXW Max. horizontal reach: 1160 m Iaodpfxozmltys Aa Ejw Max swing of platform in degrees: 999 Latest inspection: 2026-07-17 Production country: DK Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Iaedpfolht Htsx Aa Eow Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Year of construction: 2026, condition: new, Sandblasting cabinets for clean blasting operations without contaminating the work environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to seals around the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With a compressed air connection on the outside. Very large, upward-opening front flap with gas springs for quick and easy loading and unloading. Iaedpfx Ajcqm Rwoa Esw Integrated extraction system with a replaceable air filter. Blasting gun without finger trigger – airflow is controlled via a foot pedal. 4 fluorescent tubes (230 volts) in a separate housing with a protective cover and replaceable protective film, including 5 replacement films. 2 separate switches for extraction and cabinet lighting. Adjustment of the working pressure via a pressure regulator with a pressure gauge. Crossbars on the base allow for easy transport with a pallet truck. Scope of delivery: High-quality blasting gun with a ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Volume of work cabin: 825 l Air consumption: 400 - 800 l/min Working pressure: 3.4 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 1160 x 870 x 850 mm External dimensions: 1180 x 900 x 1760 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.