Used Lissmac Maurersteinbandsäge Mbs 510 - 400 V for sale (44,974)

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding Fpjdpfxoya Dh De Abgjh 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: used, -Semi-automatic round or square dough dividers from €1,490 - Semi-automatic dough divider with square bowl, 20 divisions; price: €1,490 - Semi-automatic round dough divider, 20 divisions, brand: Lambert; price: €1,990 - Semi-automatic round dough divider, 20 divisions; price: €1,990 - Semi-automatic dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,490 - Semi-automatic square dough divider, 20 divisions, brand: PANIRECORD; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,500 - Semi-automatic round bowl dough divider, 20 divisions, brand: PANIRECORD; price: €2,500 Fodpfx Aoxvyymebgoph - Semi-automatic hydraulic square dough divider JAC DIV 20, used, brand: JAC; price: €2,600 - Dough divider, 20 divisions, square DIVITRAD, brand: Bertrand Puma; price: €3,900

Condition: good (used), Year of construction: 2008, Vertical CNC Lathe Machine type: Gildemeister CTV 400 V3 Control: Sinumerik 840D powerline (XP) Year of manufacture: 2008 TECHNICAL DATA: X-axis: 700 mm Z-axis: 340 mm C-axis Max. spindle speed: 3,500 rpm Drive power: 47 kW Torque: 1,100 Nm Direct drive Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: VDI 50 Number of pallets: 15 Accessories: Fpedjw Rbcyspfx Abgoh

Condition: good (used), mileage: 945,652 km, power: 291 kW (395.65 HP), first registration: 02/2014, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, parking air conditioner, power mirror, spoiler, General information Model code: ### Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.354 kg Carrying capacity: 12.146 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 Fodpfx Aszcrg Tobgeph History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Aluminium fuel tank - Armrest - Car kit - Low-noise - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Spotlights - Stability control - stand airco - Toolbox - Visor - Webasto

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 145 mm, cutting range round steel at 45°: 120 mm, type of input current: AC, Robust cold circular saw with pneumatic workpiece clamping Clamping, sawing, return to initial position, opening in automatic mode Stepless feed rate adjustment Minimum quantity lubrication system + coolant unit Saw blade diameter from 375 to 425 mm Mitre adjustment 45° - 90° - -45° - -30° Cutting capacity with saw blade diameter 400 mm: Flat: 210 x 120 mm Mitre cut: 145 x 120 mm Round: 140 mm diameter Mitre cut: 120 mm Pole-changing three-phase motor for saw blade – circumferential speed 22 + 44 m/min Fpsdpfx Aoy Httdebgjh Voltage: 400 V

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard with all safety fittings and electrical connection cable with plug and Condor pressure switch Air receiver equipped with safety valve, receiver pressure gauge and condensate drain valve. Welded rear handle improves loading and transportability Fully automatic operation due to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use With V-belt drive, 2 cylinders in series arrangement for particularly smooth running and 400 V three-phase motor with external motor protection Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Large fan flywheel for optimal cooling Including filter pressure reducer for regulated compressed air, cleaned from condensate, dirt and oil With 2 m rubber-coated supply line and air outlet via quick coupling Supply line with phase inverter 10 years warranty on tank against rusting through Technical specifications Pressure 10 bar Suction capacity 510 l/min Filling capacity 390 l/min Speed 1240 min-1 Reservoir volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (WxDxH) 1070x495x895 mm Drive power 3,0 kW Voltage 400 V Location: ex stock Bitburg Fpsdpfx Aobyhvrebgeh subject to prior sale

Condition: excellent (used), Year of construction: 2010, Diebold Tool Presetter VEG 400 For measuring the lengths and radii of milling, turning, and boring tools - Easy to use Fodpjx Nq Htjfx Abgeph - Robust design for use directly at the machine - Universally adjustable - Rotatable spindle made of stainless steel - Reference values for diameter and length on the spindle - Outstanding concentricity accuracy - Measurement accuracy less than 0.02 mm - Digital display with a resolution of 0.01 mm - Data output ports - Includes a shipping box for self-adhesive labels for tool marking - Lockable fine adjustment for precise positioning of measurement values - Adaptable to all taper sizes and cylindrical holders Technical data: - Dimensions (L x W x H): 350 x 175 x 730 mm - Measuring range: Length: 410 mm, Diameter: 240 mm - Weight: 22 kg - Color: Red RAL 3003 - Spindle run-out: less than 0.005 mm - Measuring accuracy: less than 0.02 mm Top condition - from a school setting Location: available from stock 54634 Bitburg - Immediately available -

Condition: used, mileage: 749,000 km, power: 294 kW (399.73 HP), first registration: 03/2007, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - Retarder - Air conditioning - Trailer coupling - Articulated push-arm suspension: leaf/air Fpsdsx Tc Spspfx Abgeh

Condition: used, maximum load weight: 28,450 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2017, loading space length: 13,350 mm, loading space width: 2,450 mm, loading space height: 2,690 mm, Equipment: ABS, -Thermo King SLXI 400 refrigeration unit -Swing doors Fedpfxoyzviqs Abgeph -Tail lift Subject to errors, prior sale, and typographical mistakes. Sale only to businesses and for export.

Condition: used, empty load weight: 10,680 kg, maximum load weight: 29,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2011, next inspection (TÜV): 12/2026, loading space length: 10,500 mm, loading space width: 2,510 mm, loading space height: 970 mm, suspension: air, tire size: 245/70R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, turntable, air suspension, ABS (anti-lock braking system), extendable to 3m, lashing rings, hydraulic ramps, rear support, twin tires, wheel recesses. Body: 4-axle low-loader trailer with hydraulic loading ramps, 4x 10t Gigant axles, drum brakes! Ramp length approx. 2850 mm! Loading height approx. 970 mm! Wheel recess height at the front approx. 600 mm, at the rear approx. 670 mm! The trailer has received a new kingpin! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Fjdpfxoxx A H Is Abgsph - .

Condition: new, FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Fpsdpfxswf I Uto Abgoh Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Cam roller conveyor, cam roller conveyor, roller curve, curved conveyor with roller conveyor drive more pieces Conical rollers with plastic cover. Roll size: 450mm length, outside: 50mm, inside: 40mm Outer bow diameter: 1900mm Inner diameter: 1200mm Full track. Wind: 515 mm SEW EURODRIVE drive R27 DRS71M4 0.55kW, 2.8A, 400V Speed 116/143 Purchase and purchase of industrial equipment and machines. Fpodpegzhkxefx Abgsh Large selection of used machines, industrial equipment.

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Fsdpfxjzb Ivhe Abgoph Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Drive Parameter Value Pump motor power 45 kW Mounting plates The machine belongs to the Engel Victory 400T series. Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: galvanized Manufacturer: SSI Schäfer Type: PR350/400 total length: approx. 340 mm clear width (shelf distance): approx. 257 mm Hole diameter: approx. 25 x 10 mm profile dim.: approx. U 80 x 50 mm Fpodpfoir U Trex Abgjh Weight/pc.: approx. 1.52 kg

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Fpjdpfx Aeyxq A Hsbgsh Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: used, Year of construction: 2012, turning diameter 350 mm Fpodpfsy E Tvvex Abgsh turning length 650 mm control 840 D SL ShopTurn Siemens greates pass round over bed 385 mm Swing dia. over traverse guideway 350 mm turning speed range - main spindle 0 - 4.500 min/-1 power capacity - main spindel 11,5 / 8 kW max. Torque 340 Nm spindle diameter in front bearing 130 mm spindle bore 87 mm bar material dia. max. 65 mm max. chucking diameter 250 mm spindle head 170 h5 number of toolpositions 12 pos. Shank diameter DIN 69880: 30 mm Number of driven toolspositions 6 pos. Spindle speed - driven tool stations max. 4.500 min -1 power capacity driven tool-stations 5,5 kW x-axis 255 mm z-axis 800 mm tailstock 680 mm taper of center MK 4 clamping capacity 6,8 kN feed speeds 0 - 30.000 mm/min rapid traverse ( X / Y / Z ) 30 / - / 30 m/min Feed force ( X / Y / Z ) 4,5 / - / 6,2 kN total power requirement 28 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC Universal Lathe GILDEMEISTER - NEF 400 V3 - C-Axis - Tool-Drive - only ca. 8093h Spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI tool holders - incl. 8x tool holders - incl. 4x driven tools (2 radial, 2 axial)

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: • Easy operation • Multi-function display Fpsdsyrgu Repfx Abgsh • Various welding processes can be selected: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, total height: 2,770 mm, table load: 500 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details. • Table: 900 × 500 mm; 4 T-slots (18 mm width × 100 mm pitch) • Number of axes: 4 (X, Y, Z + 4th rotary axis; 4th axis supplied by accessory listed below) • Distance spindle nose to table: 150–610 mm • Spindle: max; 22 / 18.5 kW motor; 85 mm front bearing ID • Tool magazine: max tool Ø 80 mm (adjacent) / 125 mm (non-adjacent); max tool length 300 mm; chip-to-chip 3.2 s • Feedrates: Rapid X/Y/Z 32,000 mm/min; max working feed 16,000 mm/min • Axis motor power: X/Y 2.1 kW; Z 4.4 kW • CNC control: MORI-FANUC MSC-501 (compatible with MSC-518); memory 320 m; functions include helical interpolation and cutting force control (Power Monitor) • Coolant system: 50 bar high-pressure through-spindle coolant (TSC) • Features: air blow for part cleaning, full enclosure, end-of-cycle lamp, RS-232 interface • Floor space: 2,200 × 2,550 mm • Electrical: total installed power 50.2 kVA; 380 V, 50 Hz Additional equipment • 4th axis attachment: Tsudakoma RN-150R rotary table with 200 mm faceplate and tailstock • Chip management: 2× rear-discharge chip conveyors Fpedpfey Uxigsx Abgjh Technical Specification Taper Size BT 40

Condition: used, mileage: 74,000 km, power: 92 kW (125.09 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,600 mm, loading space length: 3,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Now chat via WhatsApp: Contact our sales advisor quickly and easily. Attention !!! Preferential sale to business customers only. Internal ID number: [3269] ----Optional bookable: * 12–64 months warranty (valid throughout the EU) * New inspection * New MOT & emission test * Nationwide delivery * Financing available even without a down payment * Tow bar / reversing camera retrofit available on request! * Spring Offer: On request and for an additional price of only €999, increase the towing capacity to up to 3,500 kg (vehicle- and manufacturer-dependent). ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Immediately operational * Euro 5 emissions standard Fjdpjy Ain Njfx Abgoph * High roof + long wheelbase * Tow bar: 2,500 kg * Air conditioning * Reversing camera * On-board computer Special equipment: Rear wing doors without glazing (opening angle 270 degrees), sliding door in cargo/passenger compartment right side with glazing. Additional features: Storage compartment with footwell lighting, overhead storage shelf, driver airbag, audio controls on the steering wheel, audio system: radio with CD player and Bluetooth, electrically adjustable and heated exterior mirrors, on-board computer, integrated sunglasses holder in headliner, COMFORT design and trim line, tachometer, rear parking sensors, electronic brake force distribution (EBD), driver assistance system: hill-start assist, rear window package, body type: high-roof box van, fuel tank: 105 liters, height-adjustable steering column, engine 2.3 liters – 92 kW dCi diesel, rear fog lamp, wheelbase 3,682 mm, full-size spare wheel, low emission as per Euro 5 standard, gear shift indicator, front mud flaps, front side airbag, cabin seating: double passenger seat, 12V socket in cargo/passenger area, partial glazing, heat-insulating glazing with UV protection. ----Interested in leasing or financing? We offer attractive terms – also with no down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information online is non-binding and intended only as a general description of the vehicle. Errors, typos, and prior sale reserved. The binding condition of the vehicle is defined solely by the purchase contract executed on-site or confirmed in writing. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to business customers.

Condition: used, Technical details: plate width: 400 mm max. stroke: 600 mm control: extern weight of the machine ca.: 0,4 t dimensions L x W x H: 2.7 x 0,8 x 0,62 m Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm Fjdpfxju Iczfo Abgsph -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described. *

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS Fpjdeq Nqkxepfx Abgsh MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, mileage: 863,107 km, power: 375 kW (509.86 HP), first registration: 05/2016, fuel type: diesel, empty load weight: 9,540 kg, maximum load weight: 8,460 kg, overall weight: 18,000 kg, tire size: 355 / 50 R 22,5, axle configuration: 4x2, wheelbase: 3,800 mm, next inspection (TÜV): 01/2027, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, total length: 25,500 mm, total width: 40,000 mm, total height: 60,400 mm, Year of construction: 2016, front tire size: 295 / 60 R 22,5, Equipment: air conditioning, differential lock, parking heater, spoiler, Stationary air conditioning system, work lights, electrically adjustable and heated exterior mirrors, differential lock, electric windows (left and right), Super Space Cap cab, air-suspended driver's seat, air suspension, radio, 12 gears, automatic transmission, air conditioning: air conditioning system + stationary air conditioning system, refrigerator, leather steering wheel, multifunction steering wheel, fog lights, entertainment: radio/CD, sleeper cab, 2 sleeping berths, heated driver's seat, sun visor, spoiler package, standard auxiliary heater, safety package with adaptive cruise control + emergency braking assistant + lane keeping assist, auxiliary brake (Intarder), Euro 6 engine, adaptive cruise control, height-adjustable SAF fifth wheel coupling, Alcoa alloy wheels, light bar with 4 additional spotlights, skylights, LED illuminated sign, maintenance due, 2 stone chips in the windshield, no error messages, German vehicle. Fpjdpfoza H Iyex Abgeh

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK screw compressors are a guarantee of quality and reliability. Our many years of experience in compressor sales have enabled us to develop models that offer an excellent price-to-performance ratio. This model is ideally suited for small workshops and small manufacturing companies. It features high air delivery (380 l/min) relative to its compact dimensions, allowing several devices to operate simultaneously. Its very low noise level (60 dB) makes working in the same room comfortable and unobtrusive. Are you looking for an efficient and reliable compressor for smaller workshops, service points, or hobby applications, while requiring a single-phase power supply? The CORMAK LUFT 400 screw compressor is the perfect solution. With a 3.0 kW motor and an impressive actual air delivery of up to 400 l/min, it provides a constant supply of compressed air necessary for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. The LUFT 400 features a reliable and robust direct-drive transmission system, eliminating vibrations and the need for belt drive adjustments. This proven solution ensures stable operation and a long service life by providing direct power transfer from the motor to the screw airend. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving access to key compressor information and increasing operational flexibility and process control. Permanent Magnet Motors (PM Motors) represent an innovative approach to electric drive technology, offering a number of significant advantages over traditional induction motors. An inverter (also known as a variable frequency drive, VFD) is an advanced electronic device that revolutionizes the operation of screw compressors. Its use allows smooth adjustment of the compressor motor speed according to the current demand for compressed air. High-quality CORMAK screw compressors, such as the LUFT 400 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to meet the demands of even the most intensive operation. In CORMAK screw compressors, such as the LUFT 400, a key element ensuring reliability and work optimization is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 3.0 kW / 4 HP Power supply: 230V / 50Hz Air delivery at 0–6 bar: average 400 L/min Air delivery at 6 bar: 390 L/min Air delivery at 8 bar: 380 L/min Air delivery at 10 bar: 380 L/min Outlet connection (G): 1/2" Dimensions: 1130 × 520 × 1300 mm Fpodpfxoza Al Ue Abgeh Weight: 170 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 0023, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,200 m³/h, intake vacuum (max.): 26 mbar, noise level: 85 dB, actuation type: electric, total height: 2,300 mm, total length: 3,000 mm, total width: 1,000 mm, overall weight: 650 kg, Equipment: CE marking, documentation/manual, Hello, I have a brand new, unused extraction unit for sale, which was purchased together with a five-axis machining center. I am selling it because I have installed a central extraction system for the machine, and this unit is not needed at the moment. Fjdpjyl Ncwefx Abgsph

Condition: new, Year of construction: 2026, functionality: fully functional, power: 8.7 kW (11.83 HP), overall weight: 99 kg, Husqvarna FS 400 LV Floor Saw incl. DIA NEW Husqvarna FS 400 LV Floor Saw incl. DIA – NEW | 187 mm cutting depth | 500 mm blade | Honda GX 390 petrol engine Item number: 967 79 65 01 Technical Data: Manufacturer: Husqvarna Model: FS 400 LV Condition: NEW Operating weight: 99 kg Blade diameter: 500 mm Bore: 25.4 mm Max. cutting depth: 187 mm Engine: Honda GX 390 petrol Engine output: 8.7 kW (approx. 11.8 HP) Fuel: Petrol Fuel consumption: approx. 4.3 l/h Water tank: integrated Starting system: recoil start Key Features & Equipment: - Robust floor saw for precise cuts in asphalt & concrete - Powerful Honda GX 390 engine – reliable & efficient - Includes cutting blade – ready for immediate use - Large cutting depth range up to 187 mm - Integrated water tank for efficient cooling - Ergonomic design for comfortable operation - Compact construction – ideal for construction sites & renovation work - Made by Husqvarna – proven quality & durability Applications: ✓ Road & civil engineering ✓ Asphalt & concrete cutting Fpedpfx Abozaqkfogoh ✓ Sewer construction & pipe laying ✓ Renovation & repair works ✓ Contractors, municipalities & landscaping ✓ Joint cutting on small to medium-sized sites Location: Warehouse D-46514 Schermbeck (NRW) – inspection & collection possible Delivery: Germany-wide & international delivery on request Price basis: ex works Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices excl. VAT Other sizes & models available! ➡️ Floor saws with various cutting depths & engine options – also electric & diesel powered Buy Husqvarna floor saws | FS 400 LV NEW | Floor saw with Honda engine | Asphalt & concrete cutter | Floor saw with 500 mm blade | Floor saw with 187 mm cutting depth | Husqvarna FS series | Petrol engine floor saw | Professional cutting technology Your reliable partner for cutting & separation technology: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Enquire now & secure immediately available new equipment! We are happy to offer you a virtual inspection of the machine via video call if required.