Used Kingsland 60 Xa for sale (21,751)

Condition: used, Year of construction: 2019, load capacity: 5,000 kg, lifting height: 6,670 mm, total length: 5,250 mm, - Bedienung Sitz - Tragfähigkeit 5,0to - Lastabstand 535 mm - Achslast vorn mit Last 11547 kg - Achslast hinten mit Last 1154 kg - Achslast vorn ohne Last 3845 kg - Achslast hinten ohne Last 3866 kg - Bereifung SE - Räder, Anzahl vorn (x = angetrieben) 2x Hodpfszhxzgjx Aahjp - Räder, Anzahl hinten (x = angetrieben) 2 - Spur vorn mm 1104 - Spur hinten mm 920 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 6 - Kupplungshöhe mm 546/421 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4284 - Arbeitsgangbreite bei Palette 800 x 1200 längs - Wenderadius 2549 mm - Kleinster Drehpunkt 638 mm - Fahrgeschwindigkeit mit Last km/h 18 - Fahrgeschwindigkeit ohne Last km/h 19 - Hubgeschwindigkeit mit Last m/s 0,31 - Hubgeschwindigkeit ohne Last m/s 0,44 - Senkgeschwindigkeit mit Last m/s 0,55 - Senkgeschwindigkeit ohne Last m/s 0,46 - Zugkraft mit Last N 3600 - Zugkraft ohne Last N 4400 - Max. Zugkraft mit Last N 15670 - Max. Zugkraft ohne Last N 16090 - Beschleunigungszeit mit Last s 5,4 - Beschleunigungszeit ohne Last s 4,7 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Batteriespannung V 80 - Energieverbrauch 60 VDI-Arbeitsspiele/Stunde kWh/h 12,1 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30 - Schallpegel, Fahrerohr dB (A)

Condition: used, Year of construction: 2022, Manufacturer: NOMA-Nowicki Model: Typhoon KN-60 Year: 2022 Condition: Used Serial Number: 52022220 Stock Number: 3374 Hodpfey Th Uiex Aahsp Bowl: 60 litres Bowl speed: variable speed, 2 - 15 RPM Knives: variable speed, 200 - 6000 RPM Mixing: 2 reverse mixing speeds Power: 3 x 400V, 50Hz, 21kW Dimensions: 1100 x 1600 x 1200 mm Weight: 1325 kg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: 4977, Leistritz ZSE 60 MAXX-44D Extruder (2018) Comprising: - Leistritz ZSE 60 MAXX-44D twin-screw extruder with - 2x 60 mm diameter screws - 40:1 L/D ratio, co-rotating - 10-barrel housing section, electrically heated and water-cooled - 2 degassing ports - 1200rpm maximum screw speed Hedozhuc Hjpfx Aahep - Motor with Flender direct-driven gearbox

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,577 kg, axle configuration: 3 axles, first registration: 06/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, wheelbase: 760 mm, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550 mm. Overall trailer width - 2600mm. Total height (unladen) - 4000 mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Lifting front axle. 1 insulated ventilation flap in the left hand rear door at the top. Tyres Information Front left - 5 mm Front right - 5 mm Hodpoyy H Dvefx Aahop Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 08/2027, total length: 640 mm, total width: 735 mm, total height: 1,110 mm, tank capacity: 60 l, input frequency: 50 Hz, empty load weight: 130 kg, overall weight: 130 kg, type of input current: three-phase, power: 6.5 kW (8.84 HP), Universal Kemper Mixer Model: Orion 60 Mixer with stainless steel bowl Bowl capacity approx. 60 liters With 180° tilting function Capacity approx. 10 to 180 liters/hour DGUV V3 certified – available only from us Connection: 400V, 16A-CEE plug Used machine Many other mixers in stock! Hsdpfxet Em Ayo Aahep

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 01/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Hodpfx Asy Dftksahjp Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 9 mm Front right - 7 mm Middle left - 9 mm Middle right - 5 mm Rear left - 9 mm Rear right - 9 mm

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Hsdpfxou R Sxxo Aahop Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Year of construction: 2021, condition: used, Roller conveyor length: 3000 mm Hodpfx Aoy A Hk Ioahep Roller conveyor width: 400 mm

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1120 mm -Cross-section: 140 x 60 mm Hjdpfx Aetvb D Rsahep -Photograph: 410 mm, see photos -Dimensions each: 1220/140/H620 mm Total weight: 210 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1095 mm -Cross-section: 200 x 60 mm Hsdpfx Ajttxd Toahep -Image: 510 mm, see sketch in the photos -Transport dimensions: 1300/900/H200 mm Total weight: 250 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 300 mm, turning diameter: 200 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 1,600 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 300 kg, Operating voltage: 230 V Frequency: 50-60 Hz Rated current: 11 A Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Turning length: approx. 300 mm Center height over bed: approx. 100 mm Travel: Hjdpfow Ivvijx Aahjp X: approx. 100 mm Z: approx. 200 mm The machine is equipped with a tailstock, a three-jaw chuck, a special tool turret including a mobile workbench and suitable accessories.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller model: MILLPLUS, total height: 2,500 mm, total length: 5,500 mm, total width: 4,500 mm, rotary table diameter: 630 mm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 26,350 h, number of slots in tool magazine: 60, mount diameter: 40 mm, tool diameter: 100 mm, DECKEL MAHO DMU 60 P Hi-dyn CNC Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A - Connection: 44 kVA - Linear scale resolution X/Y/Z-axis: 0.001 mm - Input increment X/Y/Z-axis: 0.001 mm - Position tolerance in X/Y/Z-axis: 0.010 mm - Max. tool length from spindle nose without tool breakage monitoring: 350 mm - NC rotary table clamping surface: 630 mm diameter - T-slot spacing: 63 mm - Number of T-slots: 9 - Centering bore: 50 mm diameter - Max. rotation speed of table plate: 10.7 rpm - Feedrate: 3600°/min Hsdpfx Aasx E T R Tehsp - Measuring system resolution: 0.001° - Including chip conveyor and cooling unit - Note: The machine can be transported on a truck with a width of 3000 mm. Attention: The item must be collected on a binding date between 04 and 12 March 2026, to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, machine/vehicle number: 516329J00165, Year of construction: 2018, Output: 15.0 kW, lifting capacity: 5,000 kg, unladen weight: 5,398 kg, duplex mast, side shift, partial cabin, STILL afx 30V/140A battery charger, recorded operating hours: 3,461 hours. Hsdpfjy U R Rvox Aahop

Condition: excellent (used), Year of construction: 2017, operating hours: 47,000 h, functionality: fully functional, DMG MORI DMU 60 eVo, year of manufacture 2017 5-axis universal machining center in very good condition Technical data / equipment: Manufacturer: DMG MORI Type: DMU 60 eVo Year of manufacture: 2017 Control system: Heidenhain TNC 640 User interface: ERGOline Control with 19" screen Travel ranges: X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm Spindle: speedMASTER motor spindle Tool interface: SK 40 / BIG-PLUS Speed: 18,000 rpm Power: 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Air blow-through through spindle center NC rotary table: Clamping surface: 600 x 500 mm B-axis: -5° to +110° C-axis: 360° Max. table load: 400 kg Direct measuring systems Table cooling Tool magazine: 120 tool positions Chain magazine with dual gripper Cooling / chip removal: Internal coolant supply (ICS) 40 bar / 23 l/min 600 liter tank Paper band filter Extended chip flushing Scraper conveyor Bed flushing Flushing gun Rotating viewing window Oil and emulsion mist separator Hedpfx Aajzhit Hohop Measuring and monitoring systems: Renishaw OMP60 measuring probe Tool breakage detection TRS2 3D quickSET preparation Process monitoring operating mode 4 Electronic handwheel Signal light, four-color DMG MORI Messenger DMG MORI Netservice Client Automation / preparation: Preparation for EROWA handling system M65 interface Extended M65 interface for EROWA Job Management System Operating hours according to current geometry protocol: approx. 47,589 h Spindle hours according to current geometry protocol: approx. 28,638 h Current geometry protocol dated 08.12.2025 available. The machine's geometry is in very good condition. All documented measured values are within the permissible tolerances. Particularly noteworthy are the very good parallelism values of 0.003 mm and 0.004 mm, as well as the very good roundness values of the vertical spindle of 0.002 mm and 0.008 mm. The squareness of the vertical spindle is also within the permissible specifications, at 0.003 mm and 0.014 mm. The machine is equipped with high-quality components and is ideal for precise 5-axis machining, tool and mold making, as well as demanding single-part and series production. Sale subject to prior sale. Technical data without guarantee. Inspection possible by arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,436 h, load capacity: 3,500 kg, lifting height: 6,640 mm, free lift: 2,150 mm, fuel type: electric, construction height: 2,950 mm, battery capacity: 775 Ah, remaining battery capacity: 93 %, battery voltage: 80 V, DGUV certified until: 07/2026, fork length: 1,500 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-35 electric forklift with the following specifications: Operating hours: 3,436 Hodpey Swmxjfx Aahjp Lifting capacity: 3,500 kg Lifting height: 6,650 mm Overall height: 2,925 mm Year of manufacture: 2019 STILL 3.5-ton electric forklift with a full cabin and heater, low operating hours, battery from 2023 with 93% capacity, very good front tires, new rear tires, triplex mast with full free lift, fork positioner with side shifter, single-pedal control, joystick 4+, lighting compliant with German Road Traffic Regulations (StVZO), fork length 1,500 mm, charger The following options/retrofits are available upon request (price upon request): - Two-pedal system instead of single-pedal - Different fork length Price ex works, including 1,000 hours of service according to STILL manufacturer specifications and a valid occupational safety inspection. We would be happy to arrange a viewing, demonstration, and test drive upon telephone appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs upon request). You can find more information and offers on our website!

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 8,232 h, load capacity: 6,000 kg, lifting height: 3,550 mm, free lift: 150 mm, fuel type: diesel, construction height: 2,750 mm, power: 85 kW (115.57 HP), motor manufacturer: DEUTZ, DGUV certified until: 07/2027, fork length: 2,000 mm, Equipment: CE marking, UVV, full service history, lighting, Linde H 60 D-02 diesel forklift with the following specifications: Operating hours: 8,232 Lifting capacity: 6,000 kg Lifting height: 3,550 mm Overall height: 2,750 mm Year of manufacture: 2013 LINDE 6.0-ton diesel forklift, open cabin, new front tires – very good rear tires, telescopic mast with clear view, 3rd valve, mini-lever, two-pedal control, front and rear lighting, fork length 2,000 mm Hedpfx Aoyza A Ieahop Includes service according to LINDE manufacturer’s specifications and a valid UVV inspection. The following options are available at an additional cost: Side shifter Different fork length Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial customers; subject to prior sale, errors, and typographical errors. We can deliver your new forklift cost-effectively using our own ramp-equipped low-bed trailer (transport costs upon request). Further information and offers can be found on our website.

Condition: not inspected (used), Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters Hedpfx Aaezhcg Hjhsp 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR Basic Space requirements (approx. dimensions) ----- ...

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm total power requirement --- kW weight of the machine ca. 6,8 t dimensions of the machine ca. --- m Hjdpszhchksfx Aahep

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 500 mm z-travel 500 mm Hjdpjycxinofx Aahep total power requirement --- kW weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000 Hjdpfszhcfvox Aahep

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 05/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Hedpfx Aszhbp Tjahep Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 682 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 8 mm Middle right - 8 mm Rear left - 10 mm Rear right - 9 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Internal article number: 26069 Bandsaw MEP PH 261 Year of manufacture: 2007 + Miter cut 60° + Roller conveyor (L x W x H: 200 x 50 x 65 cm) + 3 new saw blades + Operating manual + Coolant pump Hjdpfezhap Sex Aahep Saw blade dimensions: 2450 x 27 x 0.9 Cutting range: Diameter 225 mm / 200 x 200 / 240 x 160 Cutting range at 60°: Diameter 90 mm / 90 x 90 / 100 x 90 Dimensions (L x W x H): 170 x 80 x 180 cm Weight: approx. 300 kg The machine comes from an educational institution and is fully functional. You are welcome to inspect the machine while it is powered on, in our more than 500 m² heated storage area.

Year of construction: 2026, condition: new, functionality: fully functional, Conical laboratory single-screw extruder EX 60/30 The extruder is designed for processing light, free-flowing granular materials. Due to its screw size, the extruder is suitable for laboratory and testing applications. The nitrided screw with a conical inlet section is fed with materials via a hopper, which then flow through the large inlet opening into the cylinder. Subsequently, the raw materials are compressed in the cylindrical screw section and discharged through a die. A direct drive with an upstream thrust bearing forms the drive train. Ceramic heating bands also allow for high processing temperatures. A shielding cooling system is installed between the material hopper and the first heating zone. Optionally, we also offer the following machines: The strands are passed through a water bath with a stainless steel tank to the strand granulator. Hjdpfx Aaszhamwshep A screen changer can also be offered as an option between the extruder and the die. Screw speed 150 Current 29.5A CEE-63A

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,577 kg, axle configuration: 3 axles, first registration: 03/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, wheelbase: 760 mm, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550 mm. Overall trailer width - 2600mm. Total height (unladen) - 4000 mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Lifting front axle. Hedpfeyy Sbmox Aahsp 1 insulated ventilation flap in the left hand rear door at the top. Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Hedpfex A Hczox Aahep Total number of drilling spindles: 30 Total number of tool changer positions: 72