Used Italcoils Underfloor Coil Carriage 30 T for sale (83,744)

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Ljdpfx Aioy Rnrijishh Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Ledpfx Aioy Rnqfeiohh Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,026 mm, total width: 996 mm, Tested forklift battery for your forklift - 80V 6PZS 750Ah - DIN A + 1-year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types can be installed as needed) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Lhedpfxey Rnp Is Aiish Compatible with the following models and others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available, please inquire. Transport possible.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. Ljdpfx Aioq H Shcjijhh You can leave us a message if you need a different model or a different type of crusher.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Lhsdpsxpfuiefx Aiijh Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Filling, capping, and labeling line for "PET" bottles, designed for calm liquids such as oil, vinegar, juices, nectars, etc. The set includes the following components: 1) PROSPOMASZ MONO-30 piston filler - Adjustable output: up to 3,000 bottles (packages/hour) - Number of dosing heads: 8 - Number of capping heads: 4 - Bottle volume: 200 - 1000 ml - Package dimensions: ~ Diameter: 50 - 110 mm ~ Height: 150 - 330 mm ~ Minimum bottle neck diameter: 18 mm - Weight: 1,100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ Length: 1,500 mm ~ Width: 1,150 mm ~ Height: 2,300 mm The machine is currently set up for 1000 ml bottles. Additional format change parts for 500 ml bottles included. The set also includes many spare parts and seals. 2) Foil labeler (hot-melt roll-fed) Lhedpfxjwyddyo Aiioh - Manufacturer: JAWOTECH s.r.o. - Model: Tech - Lab HM - Capacity: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 - Machine dimensions: ~ Length: 2,000 mm ~ Width: 1,200 mm ~ Height: 1,800 mm Automatic hot-melt application system by NORDSON, professional grade. The machine is configured for labeling 1 L bottles. Other bottle sizes require entry component adjustment. 3) Slat conveyors with a total length of 850 cm. Used machines, fully operational, regularly serviced. Video footage of the machines in operation prior to disassembly is available. Photos show the current condition in our warehouse.

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: Ledsyxakyspfx Aiishh The machine is sold without tooling. Inspection and test run on site are possible. Condition: Used and ready for operation. Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 30052, Contour Measuring Device The CV300 offers the ability to reliably inspect contours even on large and heavy workpieces, thanks to its measuring travel of 100 x 300 mm. Technical Data External control via standard USB interfaces Measuring range CV300: 100 x 300 mm Z-axis positioning range: 400 mm (optionally 600 mm) Software-controlled stylus lifting function Automatic measuring via teach-in programming Lodpfx Ajyt Smbeiijhh Even extremely large and heavy test specimens can be measured Automated movement of all axes Easy stylus change

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 500W -Length: 90 mm -Diameter: 13 mm -Price: per piece -Quantity: 9x Available -Weight: 0.2 kg Lhjdpfxeb A Sc Uj Aiish

Year of construction: 1981, condition: good (used), Spindle motor for CNC lathe MAZAK SLAT TURN 30, year of manufacture 1981. Lodpfx Aoxr Dhyeiijhh

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Lhedju Smd Ejpfx Aiish With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high.  Lodpfx Aox Tg Axoiiohh

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Lhedpfxozdrzxs Aiieh Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Lhedpfx Aezgvbzjiish

Condition: good (used), Year of construction: 2000, Punch press Lsdpfxeul S Eao Aiishh Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamping units Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 24626

Condition: used, Year of construction: 2015, lifting height: 30,500 mm, fuel type: diesel, Weights Empty weight: 7.240 kg Lhsdown Hudspfx Aiioh Functional Lifting capacity: 320 kg Working height: 3.250 cm Dimensions of cargo space: 880 x 255 x 355 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 2080 m Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 330.1 Year of build: 2015 Condition: Used Data: Max. working height: 32,50 m Max. platform height: 30,50 m Max. reach: 20,88 m Total dimensions LxWxH: 8,80 x 2,55 x 3,55 m Platform dimensions LxW: 1,71 x 0,86 m Max. basket load: 320 kg Swivel range: 180° Ground pressure: 56 kN Ground clearance: 0,15 m Support width vertical: 2,53 m Support width one side: 3,86 m Support width both sides: 5,30 m Support length: 4,87 m Own weight: 7.240 kg Driving license class: C1 / 3 Special features: Rotating work basket, basket arm, angle of rotation, WITHOUT roof protection, advantage: power and water connection in the basket, loading area with tail lifts, box body, enormous lateral reach, automatic setup and retraction, largest reach on 7.5t chassis Information: defect on the trunk Information: TÜV and UVV new Location: 41468 Neuss immediately available

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. Lhodpfx Ajwkpvvjiieh The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Condition: good (used), Tool package 23 pieces various driven and rigid tool holders VDI 30 Lhedeiludzepfx Aiieh were mounted on Index C 200

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Electrohydraulic drive Vertical press cylinders: 3 units Stroke of vertical cylinders: approx. 130 mm Vertical cylinders adjustable via perforated grid Horizontal press cylinders: 2 units Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Central pressure beam: 1 unit Lodpfx Aoyx Nubsiijhh Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The above information is provided subject to change until the machine arrives at our warehouse. Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Used Ganner Compact 30 line boring machine Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Lhjdowhuh Sjpfx Aiieh Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: used, Stratasys Objet Objet30 Prime V3 + Cleaning Glovebox Technical specifications: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Model materials: Transparent, rigid (VeroClear) Rigid, opaque, white (VeroWhitePlus) Rigid, opaque, blue (VeroBlue) Rigid, opaque, black (VeroBlack) Rigid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Lsdpfx Aozgcqcoiijhh Condition: used Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS cabinet series is structured as follows: e.g., Type TSR-30/1000 1) T means: Temperature 2) S means: Stress Screening 3) R means: External Conditioning 4) -30 means: Lower temperature -30 °C 5) 1000 means: 1000 liters test chamber volume Technical performance data: A) TSR-30/1000 base unit without hose connections, i.e., for use as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ±0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation, and without additional equipment. Air volume flow rate approx. 2000 m³/h B) TSR-30/1000 base unit with hose connections, for connection to an on-site external test chamber Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K over time Average temperature change rate, measured with the circuit short-circuited Heating 4.0 K/min Cooling 4.0 K/min in the range of +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation, and without additional equipment, measured with the circuit short-circuited Caution: The on-site external test chamber must be absolutely sealed and appropriately insulated; any penetrations must be optimally sealed on-site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions height 900 mm width 1000 mm depth 1100 mm External dimensions height 1950 mm width 1270 mm depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, hermetically sealed stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door stop on the left, one-hand operation, lockable. Insert grid: stainless steel, support area 970 x 980mm Load per grid max. 35 kg Total load with max. grid capacity 100 kg Test chamber lighting: Halogen lamp 20 W, 12 V Control: - 32-bit controller - LCD control panel Operating data: Lhsdpezgbntsfx Aiieh Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, total width: 620 mm, total length: 660 mm, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 1.3 kW (1.77 HP), type of input current: three-phase, DGUV certified until: 08/2028, NEW NEW Bread Forming Machine NEW NEW TOP Fully automatic dough dividing and forming machine Daub model: Divider Automat 3-30 "The Original" Dough piece weight: 30 to 100 grams/piece Divides into 30 pieces with a stainless steel blade Easy operation of the 10 programs Teflon-coated dough ring with "easy click" Reinforced press head Interchangeable knife head Machine is mobile Capacity: max. approx. 6000 pieces/hour Only available from us: DGUV V3 tested Connection: 400V, 16A-CEE plug New machine & SAB tested With warranty + spare parts service Option: Leasing & rental service Forming plate Maintenance contract Service package Delivery service Training & commissioning Large selection of dough dividers in stock! Ledpfxeu Rznce Aiiohh

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 6,032 h, load capacity: 3,000 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,130 mm, power: 38 kW (51.67 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: Nissan FD 30 Triplex forklift with free lift -- Lifting capacity: 3 tons -- Year of manufacture: 2010 -- Operating hours: 6032 -- Overall height: 2.13 m -- Lifting height: 4.30 m -- Overhead guard -- Lighting system -- Headlights front and rear -- 3rd valve -- 4-cylinder Nissan engine -- 38 kW -- Solid rubber tires -- front 90%, rear 50% -- Condition: good, all mechanical -- Original condition -- Original paint -- new track rod joints installed on the left and right -- new driver's seat -- mechanical hydraulic levers Lhedpfx Aiezf Tvaoioh Side shifter, 3rd valve, work light rear, work light front, roof cover.

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. Ledpfx Aijzf N Edoishh - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200