Used Incremental Encoder for sale (1,081)

Condition: used, Sanyo MPR-311D (H) Medical Refrigerator, 340 liters Safe, reliable, and cool storage for valuable medical products Efficient temperature control A thermistor sensor and electronic temperature control ensure that the setpoint temperature is maintained. Even if the door is opened and closed from time to time, the fans ensure rapid temperature equalization, guaranteeing highly reliable and stable storage conditions that are not affected by the outside temperature. Equipped with a digital temperature display A clear digital temperature display allows for quick visual monitoring of the current operating temperature. To simplify visual temperature monitoring, the temperature is displayed in 1°C increments for a temperature range of 0°C to +15°C. Fan-forced circulation Thanks to the fan-forced circulation system, the temperature is evenly distributed throughout the chamber. Each corner of the unit is cooled immediately, with minimal temperature variations. Automatic defrost system During normal operation, the automatic defrost system switches on from time to time without increasing the chamber temperature. Over- and under-temperature alarm and safety devices If the chamber temperature suddenly drops below 0°C or rises above 15°C, the buzzer sounds. At the same time, the digital display flashes. If the chamber temperature drops below -2°C or rises above 20°C, the safety device prevents the contents of the refrigerator from freezing or the temperature from continuing to rise abnormally by activating the visual and audible alarm. A rigid polyurethane foam insulation keeps the chamber temperature stable and effectively protects against the ingress of warm air into the chamber. The inner chamber is made of chemically resistant stainless steel and provides reliable service for many years. Two easy-to-open sliding doors require less floor space. Nedpfx Abjvi H U Us Aodc Temperature: +2/+15C Volume: 340 liters Dimensions: W x D x H 1800 x 800 x 470 mm Glass doors Interior: Stainless steel 220 Volts 158 Watts You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2015, grinding diameter - cylindrical/face 203 mm regulating wheel width 247 - 330 mm max. width of grinding wheel 380 - 508 mm control SIMATIC HMI TP700/KP400 Njdpfs Aaq Rzsx Ab Ajdc weight of the machine ca. 8,10 t dimensions of the machine ca. 6,00 x 4,10 x 2,50 m Retrofit in 2015 (Huttelmaier), new in 1964 Dressers for grinding and regulating wheels MPM BM50 automatic balancing system Motorized feed axis Incremental steps: 0.001/ 0.005/ 0.010/ 0.100 mm Infeed conveyor with two-hand operation Frasch FP66N-zw belt conveyor Semotec system for finished parts POLO Filtertechnik unit Extraction system (switchable via auxiliary equipment) Nold Hydraulik und Pneumatik hydraulic power unit Central lubrication system with fill-level indicator Infeed handling system for plunge-grinding operations

Condition: used, Kistler 2151B30154002 Electromechanical NC Joining Module Ndodpfx Abjiuxtij Aoc List price: €19,000 net   The NC joining modules NCFH type 2151B... consist of a robust housing in which a position sensor is integrated as an absolute encoder and a piezoelectric pressure/tension force sensor. The pressure or tension forces acting on the sensor generate a proportional electrical charge in the piezoelectric measuring element, which is converted into an analog voltage signal by the integrated charge amplifier.   The drive motor is an electronically commutated AC servo hollow shaft motor, which is controlled by a servo amplifier. Constant speed, i.e. constant travel speed, is ensured. Standard functions such as joining on a block, positioning, and force-controlled joining, as well as moving to intermediate positions, are supported.   Technical data: with hollow shaft motor and compact design Integrated piezoelectric force sensor including charge amplifier and position absolute encoder Measuring direction: pressure / tension Measuring range 1: 30 kN Measuring range 2: 15 kN Stroke: 400 mm Path repeatability: 0.01 mm Max. travel speed: 300 mm/s With holding brake   Item condition: new, with signs of storage   You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, FANUC LR Mate 200i Automation Robot + R-J2+ Handheld Controller The FANUC LR Mate 200i is a compact, six-axis robot ideal for a variety of manufacturing and system processes. The tabletop design of the LR Mate 200 allows it to be used in a wide range of commercial and industrial applications while saving space. The LR Mate 200i offers maximum flexibility in a compact design. The hollow wrist design of the LR Mate 200i encloses all cable routing to prevent snagging, and absolute serial encoders eliminate the need for calibration upon startup. Upright or inverted mounting positions are possible without robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i features an end-effector mount integrated into the wrist, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard package for dust and liquid ingress protection according to IP54. It also has an integrated, internally mounted solenoid valve package. In addition, the 200i can achieve axis speeds of up to 480 degrees per second. Applications: Assembly, material transport, material removal, parts transfer Robot Specifications Axes: 6 Payload: 3.00 kg H-Reach: 700.00 mm Repeatability: ± 0.0400 mm Robot Mass: 39.00 kg Structure: Articulated Year of Manufacture: 2000 Robot Motion Speed J1 180 ° / s (3.14 rad / s) Ndedpfx Abjwbqvfj Asc J2 180 ° / s (3.14 rad / s) J3 225 ° / s (3.93 rad / s) J4 400 ° / s (6.98 rad / s) J5 330 ° / s (5.76 rad / s) J6 480 ° / s (8.38 rad / s) Robot Motion Range J1 ± 160 ° J2 + 150 ° - 35 ° J3 + 165 ° - 150 ° J4 ± 190 ° J5 ± 120 ° J6 ± 360 ° Item Condition: Used You can find more items – new and used – in our store! International shipping costs available upon request!

Condition: used, Bartscher Refrigerated Counter, 0°C to 10°C, TPBAR-7-180-14 1 unit – double the benefit: the convection cooling ensures a constant and even cooling temperature inside the refrigerated counter with 1 door and 4 drawers. Thanks to the high-quality and robust stainless steel surface, the unit can be perfectly integrated into any kitchen and also used as a work surface. • Number of drawers: 4 • Door hinge: Left • Door type: Hinged door(s) • Number of doors: 1 • Number of cabinets: 1 • Refrigerated cabinet: Yes • Refrigerated drawers: Yes • Standard drawer format: 1/1 GN • Connection value: 0.452 kW | 230 V | 50 Hz • Adjustable height feet: Yes • Temperature range: 0°C to 10°C • Adjustable height: 850 mm to 900 mm • Upstand: 50 mm • Cooling: Convection • Refrigerant: R134a • Digital display: Yes • Maximum depth of GN containers: 150 mm • On/off switch: Yes • Climate class: 4 • Drawer dimensions: W 299 x D 572 x H 190 mm Ndjdpfjxuqynox Ab Aoc • Reversible door hinge: Yes • Cabinet dimensions: W 335 x D 570 x H 554 mm • Number of shelves: 1 • Temperature control: Thermostatic • Control: Knob • Indicator light: On/off • Temperature control: electronic, in 0.1°C increments • Connection value: 230 V 50 Hz 452 W • Condensate evaporation: Yes • Thermostat: Yes • Work surface material: Chrome nickel steel • Material: Chrome nickel steel • Energy efficiency class: C (EU No. 2015/1094) • Dimensions: W 1,792 x D 700 x H 850 mm • Weight: 134.8 kg More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Cole Parmer Vacuum Oven The Cole-Parmer vacuum ovens are designed for drying under carefully controlled conditions – normal atmosphere, vacuum up to 30" Hg, or inert gas atmosphere. The oven is suitable for drying, vacuum embedding, electroplating, and processing electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the oven. All controls and connections (except for power) are located on the front in a vertical panel. The illuminated power switch, vacuum gauge, temperature controller, vacuum control valve, and nickel-plated brass hose connections are located on the front for convenient operation. The radiant heat from the heated wall, without exposed heating elements, ensures uniform heat and maximizes the internal volume. The temperature is controlled by a hydraulic thermostat. The vacuum values are precisely regulated between 0 and 30 inches of mercury. The silicone door seal ensures a tight seal at all vacuum levels. A window made of high-strength tempered glass, fully protected by a safety grille, provides a full view of the oven contents. The two aluminum shelves conduct heat well to the samples. The shelves can be easily removed. The continuous wool insulation ensures a uniform temperature. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm Chamber: (H x W x D) 254 x 254 x 305 mm (19.8 liters) Nsdpfewxxgaox Ab Aodc Thermometer Bimetallic, dial type; range from 0 °C to 300 °C in 5 °C increments You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Heidenhain 6FX2001-5JE24-2QAO / AM24DQI72.001-2048 6TB10-V4 rotary encoder. 738 928-02, serial number: 36495047, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ndsdpfxsi Eadxe Ab Aec

Condition: used, This listing is for the IKA WERKE RO15 P 15 Position Digital Magnetic Stirrer The unit is in full working condition and ready for immediate release Key Features & Benefits: Nedpfsxwc E Usx Ab Aedc Synchronous Stirring: Designed for uniform stirring across all positions. Magnetic-Coil Technology: Provides noiseless, consistent stirring on each of the 15 positions, even under varied loads. Powerful Drive: 100% wear- and maintenance-free No moving parts Built for continuous operation Reverse Rotation Switch: Enhances mixing effectiveness. Easy-to-Use Interface: Foil keypad with digital display Error code display for diagnostics Speed adjustable in 10 rpm increments Compact, Closed Design: Protects against spills and is easy to clean. Removable anti-slip mat adds extra security for vessels. Technical Specifications: Number of Stirring Positions: 15 Max Stirring Volume per Position: ~400 ml Speed Range: 0–1200 rpm Plate Material: Stainless steel (1.4301) Plate Dimensions: 280 x 470 mm Power Supply: 100–240 V, 50/60 Hz Protection Class: IP 40 Weight: Approx. 7–8.6 kg Ambient Temp. Range: 5–40°C

Condition: new, neu ca. 6 Monate ab Auftragse 162560 € 3072.38 € 1200 mm 730 mm 1200 x 600 mm 1200 x 600 mm 1300 mm 5 - 30 m/min 0-2250 mm/min 0,001-32 mm 685 mm 560 mm 0-675 mm/min 500-2200 1/min 11 kW 5.5 kW 3.1 kW 3.1 kW 4790 mm 3207 mm 2305 mm 8100 kg 1150 kg 1600 kg 405 x 75 x 127 mm 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection & final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis & alarm display Max. table speed (X axis) 30 m/min Integrated machine-body temperature control Double V table ways are coated with Turcite-B. Table is driven by hydraulic system with cooling unit Liner guideways coupled with precision ballscrew and AC servo moter for precise position on Y and Z axes Njdpfxswiqq Eo Ab Ajdc Automatic lubrication system with a pressure switch to detect and shut down themachine when lubrication system is down Wheel flange with scale, clamping width 43~50 mm (1.7"~2") Grinding wheel Ø405x75xØ127mm (Ø16"x3"xØ5") double recessed Electromagnetic chuck 1200 x 600 mm Automatic dressing and compensation system (mounted over the wheel) LED machine lamp Integrated oil cooling system for lubrication, hydraulic and spindle Splash guard Double-sided water baffle Heat exchanger for electric cabinet Oil Film Guideway system Air purge spindle According to "CE" regulations Operating manual in English or German OPTION (PRICE ON REQUEST): Fully enclosed splash guard

Condition: used, Year of construction: 2006, functionality: fully functional, turning length: 780 mm, turning diameter: 270 mm, spindle motor power: 15 W, travel distance X-axis: 195 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 780 mm, Nakamura-Tome WT-300 CNC Lathe Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Length: 5,230 mm Width: 2,500 mm Height: 2,300 mm Machining capacities: Max swing diameter over upper/lower carriage: Ø 310 mm (upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter, main spindle/sub-spindle: Ø 270 mm Nsdpfswx Hicox Ab Asdc Max turning length: 780 mm Spindle/bar capacity, main spindle/sub-spindle: Ø 65 mm Axis travels: X1 / X2 Axis: 195 mm Y Axis: 120 mm (±60 mm) Z1 / Z2 Axis: 780 mm B Axis: 850 mm C Axis: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Motor power (cont. / 30 min.): 11/15 kW (both spindles) Turret No. 1 & No. 2 (identical): Static/tooling stations: 24 stations (12 live tooling) Live tooling speed: 3,600 rpm Live tooling motor power: 3.7 / 5.5 kW Turning/boring tool size: 25×25 mm / Ø 32 mm Rapid traverse rates: X1 / X2 / Y Axis: 16,000 mm/min Z1 / Z2 Axis: 24,000 mm/min B Axis: 36,000 mm/min C Axis: 100 rpm B Axis: 27,000 mm/min Included accessories: LNS bar feeder model MOVE (length capacity 2,300 mm) Chip conveyor Coolant collection tank with wash-down pump High-pressure pump with external coolant tank Various fixed and driven tool holders Tool presetting arm with dual-head RENISHAW interface Part unloading arm Manuals, electrical diagrams, and EC Declaration

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 280 mm, measuring range Z-axis: 350 mm, overall weight: 100 kg, workpiece weight (max.): 50 kg, Equipment: type plate available, High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing. Anytime optionally via software updatable functions: - Motorized Y-Supporting table Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - integrated gauging force regulation - software option roughness - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) Nedjwzlcajpfx Ab Aodc - PC W11/64Bit; 24"TFT flat screen; - Compressed air unit consisting: Particulate filter 25µm/0.1µm, oil filters and water separator 2 precision pressure regulator mounted on base with stand - ConturoMatic Software; user manual - Software add-on for roughness calculation - Cable set - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of pitch deviation - Thread testing (thread calculation software optionally) etc. Technical data contour and roughness measurement: Aerostatic linear bearings (X and Z) Measuring range Contour X 280mm (XL) 360mm Measuring range Roughness Z 350mm (XL) 550mm Suitable range Ra Ra from 0.08µm* Suitable range Rz Rz from 0.8µm* Resolution 1nm Sensing system optically incremental 1 point measuring in X direction (static) Accuracy +/-(0.85µm+L/100)µm* [L=mm] Measuring speed contour 0.1-3mm/s self-optimizing Measuring speed roughness 0.1-0,5mm/s self-optimizing Positioning speed up to 25mm/s Probing force contour 30mN Probing force roughness 7.5mN Table load 25kg weight: 96kg * According to our specified terms- Subject to change without notice

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Nedpoh Ha Ipefx Ab Asdc Gross weight 1500 K

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) Ndjdpfx Aboxabacj Asc - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: used, Heavy-duty thickness planer Paoloni S 515 Planing width 510 mm Planing height 250 mm Electric height adjustment with 0.1 mm increments for precise positioning 4-knife safety planing cutterhead Table with four-point support Ndodjy A Nruepfx Ab Aoc Main motor 4 kW Feed rate 5, 8, 12.5, 19.5 m/min Steel infeed roller Segmented pressure bar made of solid aluminum Under-table roller Year of manufacture 1997 CE conformity Machine is FUNCTIONAL Available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 1988, machine/vehicle number: 100.613, functionality: fully functional, Machine available for immediate delivery. Forklift available for loading. 2 cylinders per pressing unit. Cylinder stroke approximately 110 mm. Maximum pressing force approximately 1000 kp. Working width 250 - 2500 mm. Working height 250 - 1250 mm. Working depth max. 600 mm. Electric height adjustment of the central vertical unit with scale. Nsdey Tly Ajpfx Ab Aedc Manual adjustment of the central horizontal unit in 50 mm increments with pneumatic clamping. Separate control of the vertical and horizontal pressing units via hand control valve. Pressure force regulation 4 - 10 bar.

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Year of manufacture: 2000 Technical data: Table: Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Nodjy T E Rzjpfx Ab Aedc Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Grinding spindle head: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 850 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: FANUC, table width: 630 mm, table length: 630 mm, overall weight: 15,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 45,000 W, number of axes: 4, This 4-axis HITACHI SEIKI HS630 was manufactured in 2001. It features a travel of 850 mm on the X-axis, 800 mm on the Y-axis, and 850 mm on the Z-axis. The machine has a table work area of 630 x 630 mm and a maximum pallet load capacity of 1200 kg. If you are looking to get high-quality machining capabilities, consider the HITACHI SEIKI HS630 horizontal machining centre we have for sale. Contact us for further details. Ndedpfx Abez Dud Ts Asc - Recent Maintenance / Upgrades: Equipped with new linear guides on Y-axis, refurbished ball screw with new bearings- Control System: Seikos Lambda / Fanuc Control- Table Work Area: 630 x 630 mm- Indexing Angle: 1° (360°)- Indexing Method: Absolute, 3-position- Pallet Load Capacity: Max. 1200 kg- Distance Spindle Center to Table Surface: 100 - 900 mm- Distance Spindle Nose to Table Center: 150 - 1000 mm- Spindle Taper: NT50 / NT40- Spindle Speed: 1.0 - 6000 rpm / 100 - 10000 rpm (Fully automatic & stepless)- Smallest Increment: 0.001 mm- Cutting Feedrate: 1 - 20000 mm/min- Jog Feedrate: 5000 mm/min- Rapid Traverse: 45000 mm/min- Spindle Motor (AC 50% ED): 30/45 kW (40/30 HP)- Hydraulic Motor: 2.2 kW (3 HP) - 4P- Lubrication Motor: 17-2 (0.02)-2 W (HP)-P- X-Axis Drive Motor: FANUC MODEL α30- Y-Axis Drive Motor: FANUC MODEL α40F- Z-Axis Drive Motor: FANUC MODEL α30- Table Indexing Motor: 1.0 kW (1.4 HP)- Spindle Cooling Motor: 0.4 kW (0.5 HP) - 4P- ATC Tool Capacity: 40 pieces (Optional 60 / 90 / 120 tools)- Max. Tool Diameter: Ø 125 mm- Max. Tool Length: 500 mm- Max. Tool Weight: 25 kg- Tool Selection Method: Any / Bi-directional via 2- and 4-digit T-Word- APC Exchange Method: Rotary type- Machine Weight: 15000 kg (33000 lbs)- Tool Shank Standard: BT50- Tool Shank Runout Tolerance: Max. 0.025 mm (Positions A & B)- Tool Shank Perpendicularity: 0.015/100 mm relative to plane A

Condition: new, Heidenhain ROD 426 rotary encoder, .251 681 0C, serial number: 6248063A, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Ndsdpfx Abez A N Azo Ajc

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg Nsdpjz D Taasfx Ab Aodc EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: used, Optical encoder Manufacturer: Heidenhain Nsdpecifpmefx Ab Aedc Type: OZA II 02 - 6 Device number: 2739 Mounting distance: 14.30

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC Ndjdpfx Abjd Iiprj Ajc • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free Ndodpfx Abjulnb Do Aoc - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±8 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 Nsdpfxsuxfupe Ab Ajdc quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: used, This listing is for a nonoperational Eppendorf Mixmate 5353 Mixer. This unit is supplied nonoperational and is ready for immediate release. The Eppendorf MixMate 5353 is an advanced lab mixer designed for optimal precision and efficiency when handling small sample volumes, making it an essential tool for various applications in research and clinical settings. Key Features: Versatile Format Compatibility: The MixMate can accommodate a wide range of tube and plate formats, including 96 and 384 well plates, as well as 0.2ml PCR tubes, 0.5ml, 1.5ml, and 2.0ml tubes. Integrated Vortexing Action: Its unique vortexing action is perfect for applications such as resuspending bacterial pellets, DNA samples, cell cultures, conducting immunoassays, and performing solubility tests. For instance, it can quickly re-suspend DNA pellets after ethanol precipitation, ensuring thorough mixing without sample loss. Speed and Flexibility: Mixing Frequency: Ranges from 300 to 3,000 RPM in 50 RPM increments. Touch Vortexing Frequency: Reaches up to 3,500 RPM for rapid, on-demand mixing. 2D Mix Action: The innovative 2D mixing action ensures uniform mixing across all wells, which is critical for experiments requiring consistent sample homogeneity, such as high-throughput screening assays. Adjustable Mixing Time: Users can set mixing times between 15 seconds and 99.5 hours or choose continuous operation, providing flexibility for both quick mixing tasks and longer protocols. Programmable Features: The user-friendly digital control panel can store up to 5 predefined programs, allowing for quick access to frequently used mixing parameters. Ndjdpexv A Tcofx Ab Aoc Specifications: Plate Dimensions: Accommodates plates sized 5 x 3 inches. Power Requirements: Operates on 115 – 230V; 50-60 Hz. Dimensions: Compact size of 9 x 7 x 7 inches. Weight: Weighs 10 lbs, making it portable yet sturdy. Applications: The Eppendorf MixMate 5353 is ideal for: Molecular Biology: Resuspending nucleic acid samples and cell cultures. Immunology: Preparing samples for immunoassays with consistent mixing. Pharmacology: Conducting solubility tests for drug compounds in different solvents.

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-300 12 Chanel Pipetter (Button Colour-code White The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Ndjdpoxv Dtqefx Ab Ajc Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–300 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)