Used Hinged Chip Conveyor for sale (13,421)

Condition: used, Labeller that applies a label to the top and the bottom This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side. It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling machine, top and bottom label Label heads: 2 (above and below the belt) Lrsdpfxoz Ndf Re Ab Aju Controls: Touchscreen Construction: Stainless steel frame on adjustable feet

Condition: good (used), Year of construction: 2020, functionality: fully functional, Avermann chain belt conveyor, KGS GB1500, year of manufacture 2020 Technical data: Manufacturer: Avermann Maschinenfabrik Year of manufacture: 2020 Lredpfxszyl H Te Ab Aou Length of feed belt: 6804 mm Length of incline belt: 11045 mm Gooseneck: 2168 mm Usable width: 1400 mm Belt width: 1500 mm Incline angle: 27.5° Drive power: 4.0 kW Conveyor speed: 0.23 m/s Electrical connection: 400 V Fuse rating: 8.9 A The bale press shown in the photos is not included in the scope of delivery and can be purchased optionally. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Year of construction: 2010, For sale: Conveyor belt/transporter, 9.4 meters long. Type: PPI Top Conveyor Manufacturer: Marel Salmon A/S; ID 132347 Year of manufacture: 2010 Dimensions: Width of upper belt: 29 cm Width of lower belt: 56 cm Distance between upper and lower belt: 20 cm Net price: 1,700 EUR Lrjdpfsz Tqwvsx Ab Aju Price negotiable.

Condition: excellent (used), Year of construction: 1995, Connection voltage: 400V Pressure: 6.5 bar Year of manufacture: 03/1995 Please arrange an inspection by phone beforehand! We prefer to sell to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Lodpfsgr Ewzex Ab Aoru We would be happy to purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading is possible.

Condition: good (used), For sale: Plastic conveyor/transporter, Type Z Length: The longest straight section is 120cm, followed by a descending section of 250cm and a lower straight section of 87cm. The height of the lower profile is 107cm, and the height of the highest profile, including the wheels, is 270cm. Lsdpfx Abez Tlgle Aeru Net price: 2,200 EUR Price negotiable.

Condition: good (used), Year of construction: 2021, like-new inclined belt conveyor height up to approx. 6.5 m horizontal section approx. 1.5 m length approx. 10 m Ledpoz Tc Rbofx Ab Aeru belt width approx. 40 cm drive at the top the original new price was over €12,000!!!!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Motorized conveyor belts in widths of 400 mm and 800 mm, available as infeed belts, outfeed belts, and general conveyor belts for Minipack packaging machines of the Pratika series, Modular series, etc. Lodoyaqn Rspfx Ab Aoru

Year of construction: 2019, condition: used, Technical data: Ljdpoyifv Sjfx Ab Aoru - Manufacturer: Cefla - Type: TR - Year of manufacture: 2019 - Equipped with its own control cabinet - Feed rate setting: approx. 2.2 - 20 m/min. - Emergency stop - Display for Hz frequency inverter - Transport length: 1,500 mm - Working width: 1,300 mm - Working height: 900 ± 20 mm - Installed power: 0.8 kW - EX ATEX design - Location: in the warehouse

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Lrjdpfx Aezz Ax Asb Asu

Condition: excellent (used), functionality: fully functional, Double Strap Conveyor Belt Brand Multiforce Contracts Limited Plastic Strap Top Strap Width: 240mm Bottom Strap Width: 460mm Lrsdpfxjwbkple Ab Aeu Overall Dimensions: 7500mm x 550mm x 2620mm

Condition: good (used), Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm Lrsdjb Ig Ugopfx Ab Aeu -Weight: 276 kg

Condition: like new (used), plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.300 mm infeed height : ± 800 mm total dimensions : ± 3.600 x 1.000 x 2.300 mm adjustable speed Lrsdjz Nd Hvopfx Ab Asu mobile as new

Condition: used, Year of construction: 2009, Sartorius MDP+ metal detector on conveyor, built in 2009 This Sartorius MDP+ metal detector is mounted on a mobile stainless steel conveyor with a 350 mm wide modular belt. The aperture is 400 × 165 mm (w × h), the belt is 2,060 mm long. The detector is operated from the keypad panel on the detector head; the conveyor has its own control box. Located in Emmeloord, the Netherlands. Available on request, price on request. More photos and full specifications: / Type: Metal detector with conveyor Aperture: 400 × 165 mm (w × h) Belt width: 350 mm Lodpfxez Nc U Rs Ab Ajru Belt length: 2,060 mm

Condition: like new (used), Dimensions: Lrjdoz Nhuwepfx Ab Aou Length: 2000 mm Width: 300 mm Adjustable speed: 0–9.8 m/min Stainless steel frame!

Condition: used, Prints labels and applies them straight away This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height. Lrsdpfx Aez Ndcceb Asu According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Print and apply labeller Print method: Thermal transfer (ribbon) Application: Blow applicator (air) Construction: On column with conveyor, height adjustable

Year of construction: 2012, condition: used, Tipper with discharge belt and cross conveyor for the food processing industry This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away. The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Ljdpfx Abez Ndhrj Ajru Type: Tipper with discharge belt and cross conveyor Belts: Blue food-safe discharge belt plus cross belt Safety: Mesh safety guard with emergency stop Controls: Control box with up/down buttons (height adjustment) Construction: Stainless steel

Condition: used, Inclined conveyor for moving product within a food processing line This conveyor has a stainless steel frame mounted on castors, making it easy to reposition on the work floor. The belt has raised, wave-shaped side skirts on both sides, which keep loose or irregular products on the belt while it runs at an incline. The drive and controls are housed in a compact box fitted to the side of the frame. The open frame design allows for straightforward cleaning, suiting the conveyor for use in a food processing environment. Lsdpfx Aboz Ndpce Aoru Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Incline conveyor Belt: With raised wave-shaped side skirts and cleats Controls: Compact control box on the frame Construction: Stainless steel frame on castors, open design

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm Lrsdpfx Absz I Tbre Aeu - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm - Straight section 1,000 mm - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Condition: new, functionality: fully functional, We offer a large quantity of new and unused components from an automated logistics system. We have the following items available in particular: • 235 units of KYOWA measuring rollers (DC 24 V) • 131 units of Pulse Divert Units (PDU90-W46L58-2-SR-OCD RD) • more than 1,300 units of DAMON conveyor rollers • other motorized and non-motorized conveyor components All components are new, unused, and stored on pallets. You will find an overview of the offered items, including photos and basic technical data, in the attachment. If you are interested in purchasing the entire lot or individual groups of components, please contact me. I will gladly provide additional information, detailed photos, or a price quote. Lrsdpfx Abjzqa Tpe Aou The value of the goods is over 200,000 EUR.

Condition: used, Length: 400 cm Belt width: 60 cm Ledpfozdvp Hex Ab Ajru Side guard height: 10 cm Overall height: 24 cm Drum diameter: 10 cm Belt for food processing Stainless steel Manufacturer: Haith We offer a wide selection of conveyors; inquire about the size you need. Please check out my other listings.

Condition: excellent (used), Feed height: 280–340 cm Width: 55 cm Carrier height: 55 mm Ljdpfxsycxvne Ab Aoru The machine is ready for operation

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: emergency stop, Extensive recycling and sorting plant with conveying technology, sorting technology, and steel structures Due to a planned restructuring of our recycling facility, we are offering extensive parts of our existing recycling and sorting plant for sale. The plant consists of two processing lines and includes a variety of different conveyor belt systems, sorting technology, and the associated steel structures and supporting frameworks. The scope of sale includes, among other things: Conveying technology: Chain belt conveyors Slider belt conveyors Trough belt conveyors Articulated conveyors Numerous other conveyor belts in various sizes and designs Sorting and plant technology: 3 TOMRA/TITECH NIR sorting machines (1000, 1400, and 2000) Separation drum Belt scales Sorting cabin for manual sorting Control room Steel structures and other plant parts: Steel structures and supporting frames Substructures and platforms Walkways and connecting structures Ventilation and heating system Dust extraction system from NESTRO Lrodpfx Asz R Dcgjb Aou Other existing plant components and accessories upon agreement The components offered come from a recycling and sorting plant for the processing of commercial waste and the production of alternative fuels (EBS). Due to the extensive plant inventory and the large number of conveyor belts and individual components, we have deliberately refrained from providing a detailed list of all technical data. We strongly recommend a personal on-site inspection. Interested parties will have the opportunity to gain a comprehensive overview of the entire plant, the available components, and their actual condition. Further information: Location: Munich, Germany Inspection: By prior appointment Planned plant dismantling: From January 2027 Sale: Preferably as a complete package Price: On request If you are seriously interested in purchasing, we look forward to hearing from you and would be happy to arrange an inspection appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: S.Ç. 1000 LONG DİJİTAL KONVEYÖR ( METRE), table length: 4,500 mm, • 4.5 meters in length • Measurement accuracy of +/- 0.1 mm • Servo motor (standard feature) • Decimal operation option (especially for aluminum) • Bluetooth meter measurement option (please inquire for details) • 220 Volt voltage • Touchscreen • Single-button retraction feature for the support, ensuring easy removal of the cut product from the mold Lrjdpfx Aboz Rwp Ts Aou • Design for ease of use • Easy calibration

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, New Single-head cutting machine OMC GIOBI 600 (year 2021) with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m (year 2025) and inlet conveyor PORTER 4,2m (year 2025) Condition: new, demo machines - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm Lodsy Erwfopfx Ab Aoru - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Ljdpfx Aewwmkdsb Asru Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)