Used Hatz Hatz Hydraulic Diesel Silentpack for sale (22,751)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,530 h, load capacity: 5,500 kg, lifting height: 4,050 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, fork carriage width: 1,900 mm, fork length: 2,300 mm, empty load weight: 8,030 kg, total length: 3,400 mm, drive type: Diesel, construction width: 1,950 mm, Diesel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 8.25-15 Rear tire type: Superelastic Rear tire size: 7.00-12 Guedpfx Aezp Sl Ijk Ujg Description: In addition to this Mitsubishi model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing at favorable terms are always possible for us. We are also happy to buy your used forklifts outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed information about this FD55NT. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale at our location. Side shifter, fork positioner, Heater, full cabin.

Condition: used, Year of construction: 2019, load capacity: 16,000 kg, lifting height: 5,600 mm, total length: 8,000 mm, - Antrieb: Diesel - Bedienung: Sitz - Tragfähigkeit (kg) 16000 - Lastschwerpunkt (mm) 1200 - Lastabstand (PIN-Typ) 1077 - Reifen: Luft - Achsbelastung mit Last vorne/hinten kg (900 mm Lastschwerpunktabstand) 41,640 / 3,377 - Achsbelastung mit Last vorne/hinten kg (1200 mm Lastschwerpunktabstand) 39,145 / 3,363 - Achsbelastung ohne Last vorne/hinten kg 13,430 / 13,078 - Anzahl der Räder, vorne/hinten (X = angetrieben) 4X / 2 - Spurweite, vorne (mm) 2,400 - Spurweite, hinten (mm) 2,175 - Hubgerüstneigung: a = vorwärts/ b = rückwärts 10/12 ° - Höhe Hubgerüst eingefahren mm 4,390 - Sitzhöhe mm 2,145 - Kupplungshöhe mm 822 - Arbeitsgangbreite bei 2400x2400 Paletten quer mm 8,900 - Wenderadius mm 5,253 - Kleinster Drehpunktabstand mm 840 - Fahrgeschwindigkeit mit/ohne Last km/h 26/28 - Hubgeschwindigkeit mit/ohne Last m/sec 0,33/0,38 - Senkgeschwindigkeit mit/ohne Last m/sec 0,34/0,39 - Zugkraft mit/ohne Last bei 1,6 km/h 97/99 N Gujdjza H Rzspfx Ak Usg - Max. Zugkraft mit/ohne Last 126/128 N - Steigfähigkeit mit/ohne Last bei 1,6 km/h % 24/42 - Max. Steigfähigkeit mit/ohne Last bei 1,6 km/h % 32/35 - Beschleunigungszeit mit/ohne Last (0-15 m Abstand) sec 5,9/6,5 - Betriebsbremse Hydraulisch - Motorhersteller und -typ Cummins QSB6.7 - Zylinderzahl/Hubraum Stage IIIA/B no./l 6/6,7 - Antriebssteuerung Drehmomentwandler - Druck Anbaugeräte MPa 15 - Öldurchfluss Anbaugeräte l/min 105 - Abschleppvorrichtung: Welle

Condition: used, Year of construction: 2019, load capacity: 15,360 kg, lifting height: 5,620 mm, total length: 8,000 mm, - Antrieb: Diesel - Bedienung: Sitz - Tragfähigkeit (kg) 16000 - Lastschwerpunkt (mm) 1200 - Lastabstand (PIN-Typ) 1077 - Reifen: Luft - Achsbelastung mit Last vorne/hinten kg (900 mm Lastschwerpunktabstand) 41,640 / 3,377 - Achsbelastung mit Last vorne/hinten kg (1200 mm Lastschwerpunktabstand) 39,145 / 3,363 - Achsbelastung ohne Last vorne/hinten kg 13,430 / 13,078 - Anzahl der Räder, vorne/hinten (X = angetrieben) 4X / 2 - Spurweite, vorne (mm) 2,400 - Spurweite, hinten (mm) 2,175 - Hubgerüstneigung: a = vorwärts/ b = rückwärts 10/12 ° - Höhe Hubgerüst eingefahren mm 4,390 - Sitzhöhe mm 2,145 - Kupplungshöhe mm 822 - Arbeitsgangbreite bei 2400x2400 Paletten quer mm 8,900 - Wenderadius mm 5,253 - Kleinster Drehpunktabstand mm 840 - Fahrgeschwindigkeit mit/ohne Last km/h 26/28 - Hubgeschwindigkeit mit/ohne Last m/sec 0,33/0,38 - Senkgeschwindigkeit mit/ohne Last m/sec 0,34/0,39 - Zugkraft mit/ohne Last bei 1,6 km/h 97/99 N - Max. Zugkraft mit/ohne Last 126/128 N - Steigfähigkeit mit/ohne Last bei 1,6 km/h % 24/42 - Max. Steigfähigkeit mit/ohne Last bei 1,6 km/h % 32/35 - Beschleunigungszeit mit/ohne Last (0-15 m Abstand) sec 5,9/6,5 - Betriebsbremse Hydraulisch Gjdezbdckspfx Ak Uoug - Motorhersteller und -typ Cummins QSB6.7 - Zylinderzahl/Hubraum Stage IIIA/B no./l 6/6,7 - Antriebssteuerung Drehmomentwandler - Druck Anbaugeräte MPa 15 - Öldurchfluss Anbaugeräte l/min 105 - Abschleppvorrichtung: Welle

Condition: good (used), Year of construction: 1998, Well-maintained, used plate shear from Safan. Gujdpfx Akezz Rx Do Ueg Type: HVR 430 6 Capacity: 4300 x 6 mm More photos will be available soon.

Condition: good (used), Year of construction: 1987, Used OMAG plate shear Type CEL 104 Gjdpjzz Ru Eofx Ak Ujug Capacity 1100 x 4 mm

Condition: used, Hydraulic Cylinder, Double-Acting Piston diameter: approx. 160 mm Piston rod diameter: 100 mm Cylinder stroke: approx. 170 mm Operating pressure: approx. 300 bar Compression force at 300 bar = 60 metric tons - Thread on piston rod Gsdexcivdopfx Ak Ujug - Spherical rod end on cylinder for pin Ø 90 mm Retracted installation length: 850 mm Net weight: 200 kg Cylinder was used for test purposes and is in as-new condition.

Condition: used, Hydraulic power unit with piston pump PUMPEN WART in Erkrath High-pressure pump, high-pressure hydraulic unit (in need of repair) Type SJK2C Serial No. 48315, Order No. 230045 Gusdpsxcimpsfx Ak Uog Year of manufacture: approx. 1975 Pressure capacity: 1000 bar (according to nameplate) Flow rate: 25 liters/min (according to nameplate) Flow rate: 25 liters/min (at 0 bar) Flow rate: approx. 3 liters/min (at 1000 bar) Piston pump with 2 pistons, 50 mm stroke 280 double strokes per minute Tank capacity: approx. 100 liters Motor power: approx. 11 kW Power connection: 380 volts, 50 Hz Required space (L x W x H): 1000 x 600 x 1200 mm Weight: approx. 350 kg No proper function during test run, although the unit was last used on a test bench. Possible issues due to extended downtime and storage period. Sale without functional guarantee, without technical demonstration, at a special price.

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Gjdpfxewb Hxve Ak Ujug Weight approx. 900 kg

Condition: used, High-lift pallet truck - pedestrian stacker, tiller stacker KENTRUCK Type Ergo-H Serial No. Year of manufacture: 2001 Load capacity: 800 kg Lift height: 900 mm Fork length: 1170 mm Fork width: 70 mm Entry height at base of mast: 90 mm Overall fork width (outside): 570 mm Width between forks: 425 mm Distance between load rollers: 275 mm Lifting travel per pump stroke: 15 and 45 mm - Lift travel is manually switchable at the hand pump lever - Hand lever pump operates like a conventional pallet truck, lifting movement via the pull tiller - 2 steering wheels Ø 150 mm made of polyamide, 1 with parking brake, forced steering via the pull tiller - 2 fork rollers Ø 80 mm made of polyamide Dimensions (L x W x H): 1700 x 780 x 1370 mm Net weight: 150 kg Good condition Guodpfxsxcbmnj Ak Usg

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction Gusdpotrpiiofx Ak Ujg - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Gedpfeumpq Nox Ak Ujug Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: used, Hydraulic Power Unit ORSTA Year of manufacture: 1987 With 3 motors and various hydraulic circuits Tank capacity: 160 litres Pump power: 5.5 kW - 2 units of pressure accumulator, 160 bar, 25 litres each - 1 electric pressure switch - 7 units of 4/2-way hydraulic valve with solenoid coil - 5 units of 4/2-way hydraulic valve with solenoid coils - Oil cooling with water cooler and electric pump for internal water circuit Dimensions (L x W x H): 1300 x 750 x 1700 mm Godpfoxcitpsx Ak Ujug Weight: approx. 400 kg Offered without oil content

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 7,865 h, load capacity: 2,500 kg, fuel type: diesel, mast type: simplex, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Side shifter, Guedpfx Aezz Du Ejk Uog 3rd valve, partial cabin

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 10,995 h, load capacity: 13,600 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, power: 140 kW (190.35 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,100 kg, total length: 5,150 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift – diesel Gusdpfx Akjzz Dmho Usg Load centre: 1200 Mast type: Duplex Transmission: Clark HR28000 Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Superelastic Front tyres size: 12.00-20 Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres size: 12.00-20 Rear tyres condition: 20 - 40% Sideshift, fork positioner, hydraulic sideshift + fork positioning

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 13,300 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,185 mm, power: 157 kW (213.46 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,500 kg, total length: 5,470 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift - diesel Load center: 1200 ISO class: Terminal West Mast type: Duplex Transmission: Clark 13.7HR28316 Condition: Operational and fully functional Technical condition: good Front tire size: 12.00-20 Rear tire size: 12.00-20 Gjdpezz Dmbefx Ak Usug Sideshift, fork positioner,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 375 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 3,300 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 25,200 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Gjdpfx Akozk R Hys Ueug Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable conditions are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this DCG160-12. P.S.: Our forklift workshop specializes in repair, refurbishment, overhaul, and special construction for forklifts from 8 tons upwards. We will also gladly offer your vehicle for consignment sale at our location. Side shifter, fork positioner Fork positioner opening range: 700 / 2360 mm Heater, full cabin, full free lift

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,088 h, load capacity: 12,000 kg, lifting height: 3,150 mm, fuel type: diesel, mast type: simplex, construction height: 3,200 mm, fork carriage width: 2,500 mm, fork length: 2,200 mm, empty load weight: 18,270 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,450 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Gusdpfx Aozz Dgnsk Uog Front tire size: 10.00-20 Rear tire type: Superelastic Rear tire size: 10.00-20 Description: In addition to this Hyster model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable conditions are always possible for us. We will also gladly buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this H12XM-6. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment. Side shifter, fork positioner, Fork positioner opening range: 600 / 2,355 mm Heater, full cabin

Condition: used, Hydraulische Schwenkarmstanze - hydraulic Clicking Press ATOM SE 20C Baujahr / Year 2007 - Serial-No. 10045880-115 Schneidetisch / Cuttig Surface 900 x 430mm Armweite / Travelling Head Size 370mm Schnittleistung / Power max. 20T / 196kN Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 630kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Gjdpfezz A Rfox Ak Ujug On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, operating hours: 12,647 h, power: 37 kW (50.31 HP), pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, oil tank capacity: 600 l, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S 5050mm x 400t Year of manufacture: 2010 Only 12,647 hours and 406,154 cycles!!! Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Overhang: 405 mm Stroke Y-axis: 400 mm Installed height: 720 mm Table width: 140 mm Motor power: 37 kW Oil volume: 600L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 mm Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control: Cybelec ModEva 10S, 2D – Graphic control • Upper tool clamping, Trumpf/Wila, hydraulic • Lower tool clamping, Trumpf system, hydraulic • CNC-controlled crowning • Safety light curtain, Lazersafe • 2 CNC bending aids incl. parking position • Pneumatic die shifting • LCB angle measuring system (2 x front, 2 x rear) • Foot switch Upper tools Trumpf OW203/S 60° R4 H220 130t/m, segmented, approx. 6000mm Trumpf OW203/S 60° R8 H220 130t/m, segmented, approx. 3050mm Trumpf OW300/S 86° R1 H300 80t/m, segmented, approx. 1380mm Trumpf OW210/S 28° R1 H240 40t/m, segmented, approx. 4060mm Trumpf OW200/S 86° R4 H218 80t/m, segmented, approx. 2700mm Lower tools Trumpf EV-W003, 30° R1.0 H100 70t/m, segmented, approx. 1500mm V10 Trumpf EV-W016, 50° R1.6 H150 50t/m, segmented, approx. 4100mm V16 Trumpf EV-W020, 84° R2.0 H100 70t/m, segmented, approx. 3650mm V20 Trumpf EV-W024, 80° R2.5 H100 70t/m, segmented, approx. 3050mm V24 Trumpf EV-W030, 80° R5.0 H100 80t/m, segmented, approx. 6000mm V30 Trumpf EV-W030, 30° R3.0 H100 90t/m, segmented, approx. 3050mm V30 Trumpf EV-W040, 80° R5.0 H100 120t/m, segmented, approx. 4570mm V40 Trumpf EV-W040, 30° R5.0 H100 90t/m, segmented, approx. 3050mm V40 Trumpf EV-W050, 80° R5.0 H100 150t/m, segmented, approx. 1000mm V50 Gedpszzvfiofx Ak Ujug Trumpf EV-W060, 80° R5.0 H100 150t/m, segmented, approx. 4560mm V60 Trumpf EV-W080, 80° R05 H100 150t/m, segmented, approx. 4550mm V80 Trumpf EV-W160, 80° R15 H150 200t/m, segmented, approx. 4000mm V160 Trumpf FWZ H100 120t/m, segmented, approx. 4500mm All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 4-meter Safan guillotine shear Type: VS 430 3 Gsdpfjyu Ig Hex Ak Ueug Capacity: 4300 x 3 mm Electric back gauge Output stacking system with stacker and high support table Year of manufacture: 1990

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Guodpfezi Rl Tex Ak Uog Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987

Condition: used, functionality: fully functional, 3-meter hydraulic plate shear from Jorg Gedpfozvynwjx Ak Usug Type: 4865 Capacity: 3100 x 4 mm Electric back gauge

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used small hydraulic plate shear from OMAG Guedjzk Akdjpfx Ak Usg Type: CEL 104 Capacity: 1050 x 4 mm Electric back gauge Year of manufacture: 1987

Condition: used, functionality: fully functional, Used guillotine shear from Donewell Model: 2500 3 Steel capacity: 2500 x 3 mm Electric backgauge Gujdpey Nycqsfx Ak Uog Adjustable cutting angle

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used 3-meter plate shear from Baykal Guedpfszgt Tbox Ak Uog Type: HGL 3100 x 8 Capacity: 3100 x 8 mm (steel) Electric NC back gauge Year of manufacture: 2006