Used Guangming Printing Machinery Co. Ltd. Roll-To-Roll Laminator for sale (99,946)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe Lajdpfx Aboy Uiyvjzsg The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Ledpfx Abjy Ugtaszsag Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH Lajdpevgvlkofx Abzsg It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: used, Year of construction: 2002, Technical details: thickness: 0,6 mm width: 1200 mm Length: 100 mm work speed: 1,5 - 3 m/min motor power: 45 kw compressed air: 7 bar Total weight, approx.: 4500 kg dimension machine xH: gesamt: 20 m / 2,6 m / 3 m m 2 pcs Sandwich Panel Production Plant The plant is especially suitable for producing light laminated panels. The plant consists of a feeding system (conveyor belt) for the material, cutting system, profile system and an electronically control system. The plant has a length of 20m, width of 2,6m, height of 3m. The total weight of the plant is approximately 4,5 tons. The power consumption including the thermal output is 36 KW. The recommended material of the internal layers are flame retardant Polystyrol or other light heat insulation materials. The sheet will be stable connected under pressure and heat with the Polystyrol through double sided application from portions of glue on the Polystyrol. The panels have good physical characteristics such as thermal insulation, sound insulation, wet consistency, bending strength, compressive strength and mechanical attributes. Any length of the laminated panels is possible and adjustable on customer demand. The color of the panel is variable and is depending from the color of the used sheets. Data Sheet Power Consumption of the plant (with heating system): 36KW Measurements: - Length = 20m - Width = 2,6m - Height = 3 m Laodpfxju Nxa He Abzsg - Operating Temperatures: The optimal temperature for producing the panels is approximately 25 °C. - Material: galvanized metal sheet on rolls, sheet thickness 0,3 – 0,6mm and a width of 1200mm - Power Supply: 380 V 50Hz - Maximum engine power: 45 KW - Compressed Air: 7 bar Measurements of the laminated panels: Model 1 - Width 800 – 1200 mm - Thickness 20 - 30mm Model 2 - Width 1150 mm - Thickness 50 – 150mm( adjustable) production plant consists of: - unwinding device - feed system - lamination - cutting device - glueing - fume extractor device - stacking device - electronic control system (Mitsubishi) *

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Item location is 75053 Gondelsheim Used condition, see pictures Ljdpfx Ajum I Sfobzsag Shipping by forwarding agent or collection by appointment

Condition: used, Year of construction: 2001, Format: 300 mm Lsdpfoy R U Ttex Abzsag

Condition: good (used), Automatic cloth rewinder for offset printing machines Manufacturer: Vliesstoff Kasper Lsdpfx Aszuryijbzsag Very good condition. 380V power supply, foot pedal control Device suitable for B1 and B2 format machines

Condition: used, machine/vehicle number: LM70-064, Year of construction: 2022, Weight: approx. 6,900 kg, max. printing width (sheets): 3,500 mm, max. printing width (rolls): 3,470 mm, max. speed: up to 330 m²/h, max. material thickness: 70 mm, max. roll weight: 300 kg, drying: UV-LED curing, production output: approx. 1.5 million m² printed, fully automatic feeding and stacking system, light barrier, 2 pallet spaces, 1 cooling unit SMC HRS024-AF-20, R407c, foldable roll outfeed table (machine is cleaned, print head emptied and capped, transport safety for the carriage is installed). Ljdezqzawepfx Abzeag

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 75 kW (101.97 HP), shaft diameter: 1,200 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery Lasdpfsxb A S Njx Abzsg

Condition: excellent (used), Year of construction: 2014, The EFI VUTEk GS5000r is a 5-meter, premium roll-to-roll UV inkjet printer designed to balance high-definition point-of-purchase (POP) quality with heavy-duty billboard production speeds In production, demo possible Western Europe Installation possible upon request Performance & Productivity Lodpoz Dh Ekefx Abzeag Fast-4™ Mode (Billboard): Up to 3,100 ft²/hr (approx. 288 m²/hr). Eight-Color Mode (POP Quality): Up to 1,033 ft²/hr (approx. 96 m²/hr). Production Management: Standard multi-queue functionality driven by an EFI Fiery XF RIP front-end system. For further yechnical detisl please refer to enclosed brochure

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: - 2x12 spinning positions - SE9 boxes - Corolab - 1 start-up trolley - SRZ (precision winding) - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 Lodsw Rldzepfx Abzoag - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.

Year of construction: 2016, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Stabau roller tracks S1-RGSCH 100 / 8, load capacity / year of manufacture: 2016 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center of gravity: 1,500 mm Weight: 710 kg (complete set) Overall length: 3,000 mm Overall width: 500 mm Please refer to the attached images for precise pocket dimensions. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will gladly provide you with a financing offer. We are the official Magni telehandler sales and service partner. Lajdpfx Abeznryiezeg We are the official Holp sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Westtech sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Magni range! Subject to errors and prior sale! Internal ID: 160520 = Further information = New: No Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Lajderq Eawjpfx Abzsg

Condition: excellent (used), Year of construction: 2015, operating hours: 1,463 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, workpiece weight (max.): 250 kg, total length: 908 mm, total width: 480 mm, overall weight: 3,250 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 30, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 130 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining centre FEHLMANN Picomax 56 TOP TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: HEIDENHAIN TNC 620 Stroke X axis: 500 [mm] Stroke Y axis: 400 [mm] Stroke Z axis: 400 [mm] Feed rate on X, Y and Z axes: 20000 [mm/min] Min. distance spindle nose / table: 120 [mm] Max. distance spindle nose / table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. load on table: 250 [Kg] Spindle type: ISO 30 Max. spindle speed: 12000 [rpm] Tool changer magazin number of stations: 20 Max. tool lenght: 240 [mm] Max. weight of single tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool change time: 3 [sec] Chip to chip time: 8 [sec] Number of cutting hours: 1463 [h] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] INCLUDED EQUIPMENT: HEIDENHAIN linear glass scales on the X, Y, and Z axes x1 FRIBOSA Switzerland precision vise x1 RENISHAW TS 440 part probe Ljdpfx Abozzmmwszjag x1 RENISHAW TT 140 tool probe x3 ISO30 tool holders x1 FEHLMANN GPRPLUS50 toolsetter x1 coolant tank with pumps x1 spindle chiller Various tightening wrenches Axis locking brackets for machine transport Technical and operating manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall machines, as well as milling, drilling and tapping machines, and CNC grinding machines.

Year of construction: 2014, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. number). Laedpfx Aoznruyobzeg Stabau roller track S1-RGSCH 100 / 8 – load capacity / year of manufacture: 2014 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center of gravity: 1,500 mm Weight: 665 kg (complete set) Total length: 3,000 mm Total width: 450 mm For exact pocket dimensions, please see the attached images. In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We can supply you with the complete Magni range! Errors and prior sale excepted! Internal ID: 140204 = Further information = Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Year of construction: 2014, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Stabau roller rails S1-RGSCH 100 / 8, load capacity / year of manufacture: 2014 / in stock & immediately available / in very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center of gravity: 1,500 mm Weight: 689 kg (complete set) Overall length: 3,000 mm Overall width: 450 mm For precise pocket dimensions, please see the attached images. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale are reserved! Internal ID: 141072 = Further information = Laedpfx Ajznrvdobzog Unladen weight: 689 kg Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Condition: used, A fully operational metal processing company is for sale, complete with all production equipment, a customer base, and ongoing orders. This is more than just a sale of equipment – it’s the transfer of a thriving business with a current workforce of 6 employees. Production is uninterrupted; the company fulfills existing orders, operates on a subcontracting basis, and has secured future contracts through won tenders. The company boasts a modern equipment park, mostly from 2024-2026, allowing it to perform the entire main cycle of sheet metal processing: laser cutting of sheets and tubes, bending, laser and conventional welding, grinding, and other metal processing operations. Production Facilities The premises are rented under favorable terms: Production space: approximately 400 + 600 m² An additional second floor is available, offering approximately 800 m² for further expansion Overhead cranes are installed in the premises Laedpjz A Rwasfx Abzjg Low rental cost Main Production Equipment 2026 HN-6020 Sheet Metal Laser Cutting Machine Laser power: 12 kW Working format: 6000 × 1500 mm Metal thickness to be cut: up to 10 mm 2025 Hongnili Tube Laser Cutting Machine Raycus laser source Laser power: 3 kW Tube length: up to 6 m Wall thickness to be cut: up to 10 mm 2025 LEMANS B320/4 Bending Press Equipped with bending press tooling 2024 Hongniu HN-3000W Laser Welding Machine Power: 3000 W Other Production Equipment Automatic grinding machines for parts after laser cutting Bevel grinding machine Band saw Welding machines Various production tools and auxiliary equipment A significant stock of sheet metal is available in the warehouse Transportation and Handling Equipment Electric Jungheinrich forklift Diesel Linde forklift Volkswagen Crafter cargo van Included with the company: The entire operational company is for sale, including production equipment, an existing customer base, ongoing projects and orders, won tenders, subcontracting activities, a team of 6 employees, metal stock, transportation, and other equipment and tools necessary for production. This is an opportunity to take over an already functioning metal processing company and continue production immediately, without the need to build a production base and assemble equipment from scratch. We will provide more information about the company, equipment, and sale conditions upon request. The company and the operational production can be viewed in advance by appointment. I have not specifically mentioned the company name, location, and sale price here – it is quite logical in this type of advertisement to reveal some information only to a serious buyer. Once we have the exact names/models of the laser manufacturers and the parameters of the LEMANS press, we can further refine the technical details.

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 12 h, input voltage: 380 V, input current: 200 A, type of input current: three-phase, Equipment: CE marking, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw Lodpfxow Ulp Ee Abzjag 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Year of construction: 2021, condition: used, We offer this used VALLOY VP320C roll-fed digital label printer, year of construction 2021. The Bizpress 13R is a roll-fed digital label printer designed for small-scale production environments, with a recommended monthly output of up to 20,000 m². It combines LED printing technology with a reliable Xerox print module, ensuring consistent, high-quality results. Model: VP320C Power supply voltage: 220-240 V Power supply frequency: 50 Hz Serial number: VP320C47061320210819V15TW Manufacturing date: 2021-08-19 Maximum media roller diameter: 450 mm Maximum media width: 320 mm Maximum label roller diameter: 310 mm Lodpfozdf T Ajx Abzeag Maximum label length: 1200 mm Maximum media thickness: 0.3 mm Machine weight: 350 kg Machine length: 140 cm Machine width: 85 cm Machine height: 160 cm Counter ca. 160k meters If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2006, condition: like new (used), CODIMAG VIVA 340 Age: 2006 Unwinder Camera Lodpjhhfibjfx Abzoag 12” and 14” IST UV dryer 5 x Letterpress 1 x Varnish Unit All 5 backpressure cylinder are new in 2021. Neue Rullers Flexo UV Varnish Unit Rotary Unit with Magnetic-Cylinder and more than 1000 Magentic cutting plates GAP-Master Rewinder Complete service history by CODIMAG In Germany , in production

Year of construction: 2008, condition: good (used), For sale vertical Flow Pack machine. Not used 2 years. Power: 3,5 kW Packing speed: from 15 psc/min to 30 psc/min Lajdpjibwk Hsfx Abzog If you have an questions on this, please do not hesitate to contact us.

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Laodpfx Aewg Sd Uobzeg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, input voltage: 400 V, total length: 6,000 mm, total width: 1,260 mm, total height: 2,130 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 2,500 kg, input current: 32 A, conveyor belt width: 550 mm, warranty duration: 12 months, roll width: 500 mm, 1. very precise fully automatic screen printing machine, which positions the motif with an accuracy of 0.03 - 0.05mm to the material. The integrated sensor recognizes the edge or print mark and positions the screen with an accuracy of 0.02mm to the sheet or print mark. It prints from roll to roll with unwinder + rewinder. UV drying and hot air drying up to 160 degrees Celsius are integrated 2. welded steel frame and very dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life 5. an integrated, electronically controlled pneumatic squeegee pressure compensation (option), which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material. Lasdequ R Skepfx Abzjg

Condition: used, Nut - Perforiermaschine / Creasing - Perforation machine W. Kroll & Co. Lsdpfxeyua Sus Abzjag Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, The Matrix 530 Laminator is a versatile and efficient machine designed for high-quality lamination tasks. This machine is currently in stock and located in Germany. It can handle a maximum sheet width of 550 mm and operates at a maximum speed of 10 meters per minute, ensuring quick and efficient lamination processes. The 530 Laminator supports a maximum film width of 500 mm and is capable of one-sided lamination. It features mechanical, adjustable pressure settings to accommodate various material thicknesses, starting from 135 g/qm2. The machine is compatible with foils that have a core diameter of 76 mm, making it a reliable choice for a wide range of lamination applications. Format: 550 mm Equipment: Max. sheet width: 550 mm Laodpfxowc Alns Abzjg Max. speed: 10 m/min Max. film width: 500 mm Lamination: one-sided Pressure: mechanical, adjustable Material: from 135 g/qm2 Core diameter of foils: 76 mm: