Used Guangming Printing Machinery Co. Ltd. Roll-To-Roll Laminator for sale (100,285)

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Isdpfx Asvy Aipepcsbb Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Ibodewhvq Ispfx Apcjb Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine Iodewgittspfx Apcebb register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Isdjzrmigopfx Apcobb Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, machine/vehicle number: KF0409HKP20260601, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, throat depth: 400 mm, total length: 1,685 mm, total width: 2,300 mm, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, bending angle (max.): 90 °, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, warranty duration: 12 months, Mechanical Structure 1. Frame: Integral thick steel plate welded structure with shot blasting stress relief, high torsion resistance, stable long-term precision; processed by large CNC boring & milling machine. 2. Sliding ram: Connected to cylinders via spherical joints; self-lubricating rectangular guide rails; fitted with 0.005mm grating scales on both sides for synchronous closed-loop detection. 3. Worktable: Equipped with motor-driven integral mechanical crowning wedge to compensate deflection. 4. Backgauge: Servo-driven ball screw with dual linear guides, modular multi-axis expandable design, fast and high-precision positioning. 5. Tooling & accessories: Quick clamping upper dies, dual V lower dies for fast mold change; adjustable front support stand with horizontal & vertical movement. 6. Anti-deviation structure: Dual-side grating scales eliminate throat deformation interference, strong anti-unbalanced load capacity. 7. Cantilever operation box conforming to ergonomics for easy operation. Hydraulic System 1. Integrated PHUCHIN hydraulic manifold, compact layout and zero leakage. 2. Original SKF/PARKER sealing rings for long service life. 3. Special oil tank with high cleanliness; oil level & temperature visual display; built-in overload protection. Electrical & Control System 1. Main SCHNEIDER electrical components, anti-interference and safe. 2. Movable foot switch with emergency stop; neat heat-dissipating electrical cabinet wiring. 3. DA53T CNC Controller (4+1 axes standard, expandable to 6+1 axes): - 15-inch color LED touch screen, multi-language support, mouse compatible - Storage: 999 workpieces, 20 upper molds + 20 lower molds, 100 programs with 25 steps each - Multiple ports: USB, RS232, Ethernet; supports robot linkage & automatic production line connection - Real-time mold graphics, programmable step speed, dual-machine linkage function Core Component Brands Hydraulic system: PHUCHIN/Bosch Rexroth; Oil pump: Hi-Tech/SUNNY; Grating scale: Italy GIVI; Seals: SKF/PARKER; Electric parts: Schneider; Main motor: Siemens/Lido Other Advantages - Comply with national JB & GB standards for press brakes; Noise ≤82dB(A) - 12-month warranty; 8-hour response & 24-hour on-site after-sales service 二、.Technical Parameters 1. Rated bending force: 1000KN 2. Max bending length: 3200mm; Column distance: 2700mm Ibjdpjwfwkwefx Apcob 3. Ram stroke: 200mm; Max opening height: 450mm; Throat depth: 400mm 4. Speed: Rapid traverse 180mm/s, working speed 0–10mm/s, return speed 170mm/s 5. Main motor power: 7.5KW; Power supply: 380V/50Hz three-phase 6. Precision Index - Y1/Y2 ram positioning accuracy: ±0.02mm; Repeat positioning: ±0.01mm - Workpiece angle tolerance: ±30' full length - X-axis backgauge repeat accuracy ≤±0.01mm; R-axis ≤±0.02mm 7. Environment requirements: Temp -5℃ ~ 40℃, humidity 55–85%RH, altitude ≤1000m 8. Standard axes: Y1,Y2,X,R,V (4+1 axes)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost Ibedpfx Apsxu Uhvjceb - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life Ibodpjza Rm Tofx Apcob 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Year of construction: 2026, operating hours: 20 h, condition: like new (used), functionality: fully functional, PE30 Commercial Chocolate Enrobing & Cooling Line – 30kg Tank – 2.7m Cooling Tunnel – Almost New We are selling our complete PE30 chocolate enrobing and cooling line following the closure of our recently launched protein bar production facility in London. The equipment was purchased new specifically for our own production and only went into operation around March 2026. Since then, approximately 25,000 chocolate-coated protein bars have passed through the line, so it has had relatively light commercial use and remains in excellent condition. The equipment is being sold solely due to the closure of our production facility for business and financial reasons – not because of any fault with the machinery. Complete system includes: PE30 chocolate melting & enrobing machine 30kg chocolate melting/holding tank Chocolate enrobing section with stainless-steel mesh conveyor Custom-made acrylic enclosure/cover for improved temperature stability around the chocolate 2.7m refrigerated cooling tunnel Food-grade PU cooling conveyor Copeland compressor External ventilation/extraction fan Associated components supplied with the system The custom acrylic cover was purchased separately and designed specifically for our machine to help maintain a more controlled temperature around the chocolate during enrobing. It is included in the sale. PE30 specifications Manufacturer: Anhui Dixin Machinery Technology Co., Ltd. Model: PE30 Capacity: 30kg Power: 220V / 1 Phase / 50Hz, 1.8kW Material: SUS304 stainless steel Working speed: 2m/min Mesh: 200 × 1000mm Belt: 200 × 1200mm Ibjdpjzx D Dbofx Apcjb Dimensions: approx. 1230 × 850 × 1450mm 2.7m cooling tunnel SUS304 stainless steel Food-grade PU belt 200mm × 2700mm belt 220V / 1 Phase / 50Hz 2.8kW Copeland 2HP compressor Temperature capability down to approx. -15°C Dimensions: approx. 2800 × 850 × 1380mm Weight: approx. 220kg These technical specifications are taken from the original manufacturer's documentation. The system also includes a ventilation fan intended to be installed/vented outside the production area. We used the line for premium chocolate-coated protein bars, but it can also be suitable for energy/nutrition bars, confectionery, biscuits, bakery products and other chocolate-coated products. The manufacturer also specifies the cooling tunnel for a range of food applications. The machine is currently located in Wimbledon, London, UK. Inspection can be arranged, and videos of the equipment operating can be provided to serious buyers. We are also selling other equipment from our protein bar production facility, including protein bar extrusion/forming machinery, chocolate processing equipment, flow-wrapping machines, mixers and stainless-steel production equipment. Machines can be purchased individually or as part of a complete protein/energy bar production line. Collection from Wimbledon, London. Buyer to arrange suitable transport and installation unless otherwise agreed.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Model: HYR-650-2 Ibedpfx Aezmul Sjpcsb Serial number: 2024126 Year of manufacture: 12/2024 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2020, operating hours: 2 h, condition: reconditioned (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Ibsdpfszhifisx Apcjb Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, 1 x Ethercat servo-driven horizontal flighted conveyor. This conveyor has an advanced servo system with a matched drive and motor which only works off Ethercat plc systems. Perfect for accurate 'start / stop' work. Manufacturer - Jinan Hiwell Machinery Co. Ltd. Model - LPJ600-4. Serial number - 1661962. Date of manufacture - 2020. Ibsdpfx Apszdvb Noceb Belt dimensions - 3900mm L x 600mm W. Electrical requirements - 220 V / 50 hz / 1 phase.

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions Ijdpfx Aszc Hvpopcebb • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2021, Haining Chengda Machinery Co Ltd Shunda SMD-90 12 OZ Paper Cups The machine has inpection unit to detect if the cups are sealed correctly and if they are clean. If it detects any problem, it removes the cup. The table which collects the cups is included. Real working speed of the machine is 90 - 100 cups/minute. SMD-90 is designed to make single coated paper cups for cold and hot drinking cups. The machine is in perfect working condition and can be seen in production anytime. Iodpfx Ajignz Hspcsbb

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. Isdpfx Apjwqcrqscjbb - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Ibedpfjpu A D Ajx Apcob Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual Iedpfxjzlgb As Apcsbb – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Isdpowg Sgcofx Apcsbb Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Iedey Ugtaepfx Apcjbb Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: good (used), Roll Lam 120CS Roll Laminator Iodpszuryvjfx Apcebb Double-sided cold lamination, original base included, Lamination width: 1200 mm Manufactured by: Biedermann GmbH Roll laminator equipped with silicone-coated rollers. Technical specifications: Working width / rollers: 120 cm Working width / roll width 130 cm Dimensions (W x D x H): 170 x 68 x 125 cm Infeed table height: 92 cm Weight (with base): approx. 168 kg Maximum board thickness: up to 25 mm Roller diameter: approx. 112 mm (silicone-coated) Maximum speed: approx. 3.5 m/min Power supply: 230 V / 0.07 kW

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 50 kW (67.98 HP), shaft diameter: 800 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. Iedszg Ikhopfx Apcebb • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 75 kW (101.97 HP), shaft diameter: 1,200 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. Ibodpfexb A S Nox Apcob MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: used, Year of construction: 2018, REF: MM6441 Ibsdpeza T Slofx Apceb Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible. Ijdjzt Nbzspfx Apcsbb

Year of construction: 2001, condition: excellent (used), functionality: fully functional, CNC mandrel bending machine including O-ring assembly Fully automatic, high-precision production cell for the series production of pipework systems (e.g. brake, fuel or hydraulic lines), including a robot, feeding system, dual O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology sectors. Technical data 1. CNC mandrel bending machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Year of manufacture: 2001 Control system: Multi-axis CNC control with operator panel Special features: Collet head movable in X / Y / Z, equipped with 3 bending planes for highly complex three-dimensional shapes without tool changes. Iodpfxjzz Hmqj Apcobb 2. Loading and unloading robot Manufacturer: Motoman (Yaskawa) Model: ERCS-UP6-A00 Year of manufacture: 2000 Robot control: XRC including original teach-in terminal (handheld control unit) 3. Automatic O-ring assembly stations Manufacturer: ASM HASEMO GmbH Type: MOSA-800 / MOSA-1100 Year of manufacture: 2010 (high-quality upgrade/retrofit) Function: 2 O-ring assembly stations including a complete bulk material feed system (vibration hoppers/spiral conveyors) for twist-free and gentle external assembly of sealing rings. 4. Quality assurance & peripherals Measuring computer / leak tester: Innomatec, type: LT-C602 (for direct in-line testing) Blow-off station: Integrated for cleaning

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, ----- Ibjdpfxjyl Ubfj Apcjb