Used Gea Breading Machine for sale (66,221)

Condition: used, max. wheel diameter 300 mm gear width 200 mm max. module 12 min. module 0,5 Gkedpfx Aexu Nttokyjc total power requirement 2 kW weight of the machine ca. 1 t dimensions of the machine ca. 0,8 x 1,2 x 1,5 m

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000# Gkedportrzdefx Akyjc

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht Gksdpfxju A I Els Akysc - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm Gedpjxu U Sujfx Akyskc - Spindle stroke: 130 mm - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice

Condition: ready for operation (used), * Brand: Nordberg – Bergeaud * Type: Elivair 13 Gjdpsywm Enofx Akyjkc * Surface: 6000 x 2200 mm - 4 Decks * Driving : two pieces E-motors of each 22 kW * Incl.: springs and springsupport

Condition: good (used), max. wheel diameter 630 mm gear width 375 mm max. module 10 clamping table 550 mm table hole 125 mm milling spindle speeds infinitely variable 62 - 390 U/min taper MORSE 5 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm Gkjdpfx Aeua It Ujkyjc shifting 200 mm main drive motor 7,5 kW total power requirement 21 kVa weight of the machine ca. 8,2 t Equipment of the machine: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport - Year of construction approx. 1976

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz Gjdpfx Aeyb Sx Tjkyskc weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm Gjdpfsv T Nqasx Akyskc gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Mzbbp001, Equipment: CE marking, Scope of Application: Apply more material blocks(such as betel, olives, candied fruit,Gong date),multiple packet soup, solid dispersing materials, smallElectronic components of irregular objects.Compact structure. stable function and Simple operation.. The first third-generation double freguency control the bag could be set and cut, unnecessary adjust air without changing film color code tracking one pace reachs the designated position, il's saving lime and film.aIt adopts imported electric appliance, touch man machine interface, conv-enient parameter setting. Self-cheching function, trouble can be read easily. Gedpfoygd Ansx Akyskc High sensor photoelectric color chart tracking, make the cutting position more correctly."Dependant temperature PlD controlling suitable for various mate-rials of packaging men brane. Position stop function, no adhesive and no waste of membrane. "Clean rotation system. more reliable operation and more convenient maintenance. All the controlling operates by the software, convenience for functionad-justment and technical up grading.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, position of the milling head: Schwenkbar (50°), table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, rotational speed (max.): 360 rpm, rotational speed (min.): 18 rpm, distance table to spindle center: 500 mm, tool diameter: 215 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. Gkodpfx Asz Et N Rjkyoc The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Max. diameter with counter support: 1450 mm Max. diameter without counter support: 2100 mm Diameter of the clamping table: 1800 mm Gjdpfx Asz Df A Tjkyskc Total weight: 38 tons The clamping table has been disassembled and overhauled.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, wheel width: 200 mm, stroke length: 230 mm, feed length X-axis: 500 mm, type of input current: three-phase, total height: 2,900 mm, table load: 2,750 kg, table diameter: 1,005 mm, overall weight: 12,000 kg, input frequency: 50 Hz, total width: 3,300 mm, total length: 3,800 mm, distance table to spindle center: 640 mm, gear diameter: 1,000 mm, distance table center to spindle nose: 640 mm, workpiece diameter (max.): 1,000 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Siemens Sinamics S120, control type: CNC control, stroke rate (min.): 15 1/min, stroke rate (max.): 510 1/min, The universal machine for gearings that cannot be milled: The Lorenz LS 1000 CNC machines internal and external toothed spur gears up to 1000 mm in diameter – hollow gears for planetary gearboxes, gear rings, couplings, gears with a flange or chamfer. Completely modernized with Siemens Sinumerik ONE, new electrical system, hydraulics and lubrication, designed for maximum performance and accuracy in flexible manufacturing. Acceptance according to DIN and manufacturer's standards with a protocol. Offered by Serwema Retrofit Solutions, Chemnitz. The LS 1000 was developed as a universal machine for construction machinery, wind turbine and machine tool gearboxes, mining technology, aerospace and textile machines, and is suitable for both single parts, small series and large series. The main application is the hobbing of straight-toothed and – with a helical guide and matching cutting wheel – helical-toothed spur gears with internal or external teeth. With software options, the machine can also process non-circular gears, grooves and cams; with special cutters, couplings as well as involute and spur gears are produced. The Sinumerik ONE with electronic gear unit guides the user through workpiece and tool data using masks, without the need for programming. Gksdpsz E H Rnofx Akysc

Condition: used, Year of construction: 1990, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gksdpfxozy E Tae Akysc Lukas van Rossum

Condition: used, Year of construction: 2006, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10,00 to Gjdpfevxwr Ajx Akyekc dimensions of the machine ca. 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal Gksdpewftuxjfx Akyec gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: used, functionality: fully functional, total height: 1,100 mm, table diameter: 310 mm, overall weight: 5,000 kg, total width: 2,300 mm, total length: 1,800 mm, For sale is a gear hobbing machine as shown in the attached pictures. Manufacturer: LORENZ Max. wheel diameter: 500 mm Max. module: 5 Max. gear width: 100 mm Max. gear shaping length: 75 mm Number of strokes/min of the cutter: 45 / 424 Cutting speed: 18 Screw diameter: 78 mm Max. gear shaping diameter: 500 mm Max. external shaping diameter: 500 mm Max. internal shaping diameter: 450 mm Hole diameter of the table: 125 mm Diameter of table: 310 mm Total power: 3.0 kW Voltage: 220 / 380 V Gksdpfxjzz Ilns Akyjc

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm max. module 20 min. module 1,5 total power requirement 1 kW Gsdpfx Ast Hwptjkyjkc weight of the machine ca. 3 t dimensions of the machine ca. m

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Gkedpfx Akjt Hww Djyec Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: ready for operation (used), Gear shaping machine STANKO 5M150 Max. diameter of gears that can be cut: 800 mm Max. module: 12 mm Max. cutter stroke: 200 mm Saddle indexing gear diameter: 360 mm Distance between axes (tool and table): 0-700 mm Largest tool diameter: 200 mm Cutter arbor diameter: 44.443 mm Taper: M5 Table diameter: 800 mm Distance from floor to table: 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double stroke per minute (s.p.m.): 33-188 mm Range of table feed rates per cutter double stroke: -Circular: 0.2-1.5 mm -Radial: 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimensions: 3100x1800x3500 mm Gjdoqcvkvepfx Akyjkc Weight: 10200 kg

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t Gksdjy Umizspfx Akyoc dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm Gksdpoyf Ehisfx Akysc - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Condition: used, Year of construction: 1989, max. wheel diameter 120 mm Gkodpfx Aoz Drcaokysc gear width 400 mm max. module 10 min. module 1 total power requirement 40 kW weight of the machine ca. 7 t dimensions of the machine ca. 3,840 x 5,025 x 2,490 m

Condition: used, Year of construction: 1993, max. wheel diameter 330 mm gear width 180 mm Gkodpfxet Hwyfe Akyoc total power requirement 12 kW weight of the machine ca. 7500 kg

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad Gjdpfx Aovxwxcekyokc speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: good (used), Gear Hobbing Machine Strausak 30 Workpiece diameter for manual loading: Ø 35 mm Workpiece diameter for magazine loading: Ø 15 mm Workpiece diameter for fully automatic loading: Ø 10–12 mm Maximum hobbing length: 12 mm Plunge feed at 42% of longitudinal feed: 22 mm Plunge feed at 25% of longitudinal feed: 14 mm Module in steel max.: 1.0 mm Module in non-ferrous metals max.: Solid material ø26 / ø35 mm Selectable number of teeth: 5–390 Cutter speeds: 1160–8550 rpm Plunge feeds per workpiece revolution: 0.0325–0.273 mm Longitudinal feeds per workpiece revolution: 0.033–0.65 mm Cutter diameter: 8–24 mm Machine weight: 600 kg Main motor: 0.8 HP at 3000 rpm Hydraulic motor: 0.25 HP at 1500 rpm Coolant motor: 0.25 HP at 1500 rpm Gjdpfx Ajx Dxu Sskyskc No guarantee is given for the accuracy, completeness or timeliness of the information provided.