Used Fortschritt Universal 45 for sale (12,258)

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm Godoxq R E Njpfx Ab Deit change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Kuka KR200-3 comp Robot Three identical machines are available. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, x-travel 300 mm y-travel 160 mm z-travel 330 mm Gisdpsy Sbkbsfx Ab Dst table surface area 600 x 200 mm table load capacity 200 kg Spindle Speed 40-2.000 U/min. tool taper SK40 dimensions 1200 x 1160 x 1800 mm machine weight ab. 800 kg

Condition: used, Year of construction: 2003, 1 used very good condition universal milling machine with 3-axis digital display FAGOR, stepless feed and top support drive Make: ARSENAL, Bulgaria Model: FUV 321 M year of manufacture: 2003 Technical data: Spindles: Spindle mounting vertical + horizontal ISO 50 Speed range, vertical, infinitely variable 30 - 2000 rpm Speed range, horizontal, infinitely variable 30- 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Upper arm adjustment approx. 600 mm table tiltable ± 45 max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm table adjustment: feeds lengthwise and crosswise, infinitely variable 12.5 - 630 mm/min ditto vertical, infinitely variable 5 - 262 mm/min rapid traverse longitudinal and transverse 2,5 m/min ditto vertical 1,04 m/min Drive drive power 7,5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: - 3-axis digital display make FAGOR model NV 300 M - Universal milling head system "HURON" manually adjustable over 2 levels Gjdpfx Asbpmurjb Doit - Stepless feed via joystick and potentiometer in all 3 axes - Stepless speed for vertical + horizontal via potentiometer with 2 servo drives make TELEMECANIQUE model Altivar 28 - Stepless feed and stepless speed with digital display in each case - Upper arm with motor drive of the universal milling head - E [...]

Condition: excellent (used), GSR 6-45 TE drywall screwdriver - with MA 5 magazine attachment - year of manufacture 2015 - used Giedpfx Abjy Sah Ee Dst

Year of construction: 2022, condition: ready for operation (used), overall weight: 4,500 kg, This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum steel bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this roll bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D roll bending machine. Contact us for more information about this machine. Gedjyzg A Uepfx Ab Doit • Max diameter (steel 450 n/mm²): ∅ 45x4 mm // max diameter (stainless steel 700 n/mm²): ∅ 40x3 mm // max diameter (steel 450 n/mm²): 40x35x2 mm • Tube passage in the collet: ∅ 45 mm • Useful working length with tube passage in the collet: 5100 mm • Bending angle max: 180+10° • Speed y axis: 150 °/sec. // speed x axis: 450 mm/sec. // speed z axis: 360 °/sec. • Precision y axis: +/-0. 1° // precision x axis: +/-0. 1 mm // precision z axis: +/-0. 1° • Bending: clockwise • Total installed power: 15 kw • Voltage and frequency: 400 volt / 50 hzMachine still under powerSquare tube sizes: 12x12, 20x20 • Round tube diameters: 12, 16, 20, 22, 27, 33.7 • Notes: • Square 12x12 can also be used for round diameter 12 • Square 20x20 can also be used for round diameter 20

Condition: good (used), functionality: fully functional, Universal Milling Machine MIKRON WF3DCM/155 Heidenhain TNC 155 Internal Machine No.: 58 Would you like an offer? Please send us your email address. Travels: X-axis: 500 mm Y-axis: 500 mm Z-axis: 350 mm Table area: 800 x 450 mm Spindle taper: SK 40 DIN ISO Machine weight: approx. 2.3 t Gsdpfsy R Rmpox Ab Deit

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame Gisdpfx Aboy R Nnfj Det • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm Gijdpfx Aoy I Db Ieb Det 840x390 mm 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 560 mm 320 mm Godpfx Aboy Nnznj Deit 400 mm 950x450 mm 1050x320 mm 25-3600 U/min SK 40

Condition: new, Year of construction: 2021, 585/600 mm 465/480 mm 385/400 mm 900x500 mm Gjdpswp Tiwsfx Ab Doit 1200x250 mm 40-2000 U/min SK 40

Condition: new, Year of construction: 2025, 600 mm Godpfjwp Tqbex Ab Djit 500 mm 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 600 mm 500 mm 400 mm Godpfewp Trrex Ab Deit 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 420 mm Gsdpfey I Dbuex Ab Djit 220 mm 380 mm 840x390 mm 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm Giedpsxfb H Tsfx Ab Djt 840x390 mm 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 420 mm 220 mm Gijdpfx Abey I Dbzo Dot 380 mm 840x390 mm 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 1050 mm 480 mm 550 mm Giodpfx Abswp Tn Ho Djt 1524x380 mm SK 40 127 mm 105 mm

Condition: new, Year of construction: 2026, 560 mm 320 mm 400 mm Godpfjwp Tngjx Ab Dsit 950x450 mm 1050x320 mm 25-3600 U/min SK 40

Condition: new, Year of construction: 2026, 560 mm 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min DIN 69871 SK 40 Gijdpfey H N Spox Ab Dst

Condition: new, Year of construction: 2023, 50 mm 1250 mm 1345 - Gedpfx Aowp S U Sob Djit MK 5 bore depth 270 mm spindle turning speed range 56-1450 U/min

Condition: new, Year of construction: 2026, 560 mm Gjdpfx Asy H N Siob Doit 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min SK 40

Condition: new, Year of construction: 2026, 600 mm 500 mm Gjdoyiu Rzopfx Ab Doit 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 560 mm 320 mm 400 mm 950x450 mm 1050x320 mm Gsdpfsyrtyaox Ab Doit 25-3600 U/min SK 40

Condition: new, Year of construction: 2023, 600 mm 500 mm 400 mm 1000x500 mm Gjdpowp Tm Aefx Ab Dsit 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 1200 mm 580 mm 550 mm 1575x425 mm SK 40 152 mm Gijdpey A Tavefx Ab Dot 110 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control – TOP Condition Technical Data: >> Year of manufacture: 2006 >> Control: Heidenhain iTNC 530 >> Travel (X/Y/Z): 500 / 450 / 400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feed rate steplessly programmable in X, Y, Z: up to 20,000 mm/min C and B axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y/Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 tool positions >> Clamping surface: Ø 500 x 380 mm Distance between T-slots: 63 / 14H7 >> Table load: 200 kg >> Dimensions and weight (approx.): Machine without control panel and accessories Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg Gedoy R Dgpjpfx Ab Djit >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> High-pressure coolant supply (IKZ) 40 bar >> Coolant purification system (fleece filter system) >> Rinse gun >> Visiport >> Measuring system with air purge >> Prepared for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all cooling and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers etc. fully cleaned. >> Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in excellent condition. The main spindle has been overhauled (exchange spindle), fully serviced, and an acceptance protocol is available. Invoices for the overhaul totaling €42,000 (net) are available. You are welcome to view and test the machine under power at our premises.