Used Exhausting System Unbekannt for sale (41,255)

Condition: used, power: 0.5 kW (0.68 HP), input voltage: 380 V, type of input current: three-phase, suction capacity: 1,250 m³/h, operating temperature: 50 °C, negative pressure: 200 Pa, Electrostatic oil mist exhauster. Gbodpfxjx Tzlue Abgon

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Gbsdpfolxyhfox Abgon essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2000, condition: used, 3 Stück Dimensions (L/W/H) siehe Bilder mm Godpfsupmwlox Abgjbn weight of the machine ca. . t

Condition: good (used), 2 used T-slot angle plates Height: 1500 mm Width: 1000 mm Depth: 500 mm 10 transverse slots Gedpey Iakfjfx Abgebn 3 longitudinal slots First-class surface finish

Year of construction: 1990, condition: excellent (used), used T-slot clamping angle Gbjdpfx Asgwxmxjbgjn Technical data: Dimensions height 1120 mm width 320 mm Groove width 20 mm with - 7 horizontal T-slots used, in good condition

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm Gbjdpfx Aozcwr Isbgen plate height: 250 mm weight of the machine ca.: 4,6 t space requirements of the machine approx.: 4,0 x 1,5 x 0,25 m *

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Gjdpfx Abozcwpyjgobn -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 24 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/70/H70 mm -Total weight: 2.2 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Ø 190 mm -Passage: Ø 60 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: available in a wide selection, can be supplied for an additional charge -Dimensions: Ø 190 x 100 mm -Weight: 9.2 kg Gbjdpfozcwmxex Abgon

Condition: good (used), Wire electrode, welding wire, welding wire, flux-cored wire -Welding wire: flux-cored wire, drum with unwinding device -Wire: Aluminum Ø 2.4 mm -Roller: Ø630 x 460 mm -Transport dimensions: 680/640/H690 mm Gbjdpjzcv Rpsfx Abgjn -Weight: 238 kg

Condition: good (used), Pearl mill, agitator mill, shredder, crusher, grinding mill, counter blade, crushing blade, counter cutter -Counter blade: Length 640 mm -Hole spacing: 173 mm / bore Ø 22 mm Gjdpfx Ajzcu Dujbgobn -Number: 3 knives available -Price: per piece -Dimensions: 640/150/29 mm -Weight: 21.3 kg/pc.

Condition: new, The scope of delivery includes: 1x Top tool, new Tool system: UKB system Trumpf / Wila / LVD with Simple Clamp Type: 15320-500 (15320X) Angle: 28° Radius: R 1.0 mm Length: 500 mm Width: 24 mm Height: 120 mm Load capacity: 800 kN/m max. Material: 42 CrMo4 Weight: ≈ 10 kg Godpfx Aezcuqbebgebn Internal reference: DE-KW23-26-03 Explanation: The tool is used in bending presses (also known as die-bending presses) for industrial sheet metal processing. The standardized tool holder, "Simple Clamp safety button," allows the operator to install and remove the segment vertically at any desired point of the press clamping mechanism. Note: This tool is being sold as part of a customer return (purchase date: April 2026) and is therefore offered at a reduced price. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, diameter 500 mm boring diameter 90 mm weight ca. 60 kg Diameter: Ø500mm Passage: 90mm Godpfx Abszcq H Sogobn Weight: about 60kg

Condition: used, inner taper of milling spindel / collet diameter / Gbsdpfszcq H Ejx Abgjn turning speed range / U/min

Condition: used, inner taper of milling spindel / collet diameter / turning speed range / U/min Gbodpfezcq Hrex Abgsn

Condition: used, diameter 315 mm boring diameter 115 mm - / Diameter: Ø 315mm Passage: 110mm Gjdpfx Abezcq Ehogebn Weight: 35kg

Condition: ready for operation (used), IEC71L28-LC-FA2 series LC three-phase motor water cooled 400V , 200 HZ , 12 kw , IP65 , B5 - flange design, centering diameter 110 mm, 4 x bore Ø 9 on pitch circle 130 mm, shaft smooth 28 x 6 x 60 mm, rated speed: 12000 rpm, Max. Speed: 16000 rpm, dynamically balanced, coolant connection M14 x 1,5 , manufacturer unknown, used, normal traces of use, 100% functional, scope of delivery according to photos Gbsdoi D Id Repfx Abgon

Condition: new, Motor cable SE-17m for Sinumerik 840D ,unused in original packaging, 100% functional, scope of delivery according to photos Gsdpfxei D I Tmj Abgobn

Condition: new, APPC1740T-WL-B 17" Panel PC SN:TABI11000223 Manufacturer unknown, unused in opened original packaging, 100% functional, scope of delivery as per photos Godpfsp Ilk Sox Abgobn

Condition: new, Screw spindle pump FFS 348 SN:22209 for EMAG machine, manufacturer unknown, unused, 100% functional, scope of delivery according to photos Godpeulqkusfx Abgebn

Condition: ready for operation (used), Inductor diameter 20cm height 60cm, used, minor signs of wear, 100% functional, scope of delivery as per photos Gbjdpfoqfub Ujx Abgon

Condition: ready for operation (used), Milling table 800x500x210.50 for DMC 63V machine, used, good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Gbsdoy Srnwspfx Abgsn

Condition: ready for operation (used), Tailstock from HAAS grinding machine, manufacturer unknown, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for costs of packaging and shipping! Gjdsx Et T Uspfx Abgobn

Condition: ready for operation (used), Tool turret 5603923WZ with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for charges for packing and transport separately! Gsdpfx Absy Rcnlegsbn

Condition: ready for operation (used), Transroll spindle L = 1110 mm , Ø thread: 40 mm, pitch: 6 mm, Ø journal: 22 mm, Ø shaft: 30 mm, length shaft: 95 mm , Ø ball cage: 63 mm , Ø flange: 87 mm ,used, normal signs of wear, 100% functional, scope of delivery as per photos Gbsdpfexaiaqox Abgsn

Condition: new, APPC1740T-WL-B 17" Panel PC SN:TABI090001 Manufacturer unknown, unused in opened original packaging, 100% functional, scope of delivery as per photos Godpjp Ilk Iofx Abgjbn